x86: implement gbpages support in change_page_attr()
[wrt350n-kernel.git] / arch / m68k / mm / memory.c
blobb7473525b43179fa9066d3a1d978120f1caac164
1 /*
2 * linux/arch/m68k/mm/memory.c
4 * Copyright (C) 1995 Hamish Macdonald
5 */
7 #include <linux/module.h>
8 #include <linux/mm.h>
9 #include <linux/kernel.h>
10 #include <linux/string.h>
11 #include <linux/types.h>
12 #include <linux/slab.h>
13 #include <linux/init.h>
14 #include <linux/pagemap.h>
16 #include <asm/setup.h>
17 #include <asm/segment.h>
18 #include <asm/page.h>
19 #include <asm/pgalloc.h>
20 #include <asm/system.h>
21 #include <asm/traps.h>
22 #include <asm/machdep.h>
25 /* ++andreas: {get,free}_pointer_table rewritten to use unused fields from
26 struct page instead of separately kmalloced struct. Stolen from
27 arch/sparc/mm/srmmu.c ... */
29 typedef struct list_head ptable_desc;
30 static LIST_HEAD(ptable_list);
32 #define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page(page)->lru))
33 #define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
34 #define PD_MARKBITS(dp) (*(unsigned char *)&PD_PAGE(dp)->index)
36 #define PTABLE_SIZE (PTRS_PER_PMD * sizeof(pmd_t))
38 void __init init_pointer_table(unsigned long ptable)
40 ptable_desc *dp;
41 unsigned long page = ptable & PAGE_MASK;
42 unsigned char mask = 1 << ((ptable - page)/PTABLE_SIZE);
44 dp = PD_PTABLE(page);
45 if (!(PD_MARKBITS(dp) & mask)) {
46 PD_MARKBITS(dp) = 0xff;
47 list_add(dp, &ptable_list);
50 PD_MARKBITS(dp) &= ~mask;
51 #ifdef DEBUG
52 printk("init_pointer_table: %lx, %x\n", ptable, PD_MARKBITS(dp));
53 #endif
55 /* unreserve the page so it's possible to free that page */
56 PD_PAGE(dp)->flags &= ~(1 << PG_reserved);
57 init_page_count(PD_PAGE(dp));
59 return;
62 pmd_t *get_pointer_table (void)
64 ptable_desc *dp = ptable_list.next;
65 unsigned char mask = PD_MARKBITS (dp);
66 unsigned char tmp;
67 unsigned int off;
70 * For a pointer table for a user process address space, a
71 * table is taken from a page allocated for the purpose. Each
72 * page can hold 8 pointer tables. The page is remapped in
73 * virtual address space to be noncacheable.
75 if (mask == 0) {
76 void *page;
77 ptable_desc *new;
79 if (!(page = (void *)get_zeroed_page(GFP_KERNEL)))
80 return NULL;
82 flush_tlb_kernel_page(page);
83 nocache_page(page);
85 new = PD_PTABLE(page);
86 PD_MARKBITS(new) = 0xfe;
87 list_add_tail(new, dp);
89 return (pmd_t *)page;
92 for (tmp = 1, off = 0; (mask & tmp) == 0; tmp <<= 1, off += PTABLE_SIZE)
94 PD_MARKBITS(dp) = mask & ~tmp;
95 if (!PD_MARKBITS(dp)) {
96 /* move to end of list */
97 list_move_tail(dp, &ptable_list);
99 return (pmd_t *) (page_address(PD_PAGE(dp)) + off);
102 int free_pointer_table (pmd_t *ptable)
104 ptable_desc *dp;
105 unsigned long page = (unsigned long)ptable & PAGE_MASK;
106 unsigned char mask = 1 << (((unsigned long)ptable - page)/PTABLE_SIZE);
108 dp = PD_PTABLE(page);
109 if (PD_MARKBITS (dp) & mask)
110 panic ("table already free!");
112 PD_MARKBITS (dp) |= mask;
114 if (PD_MARKBITS(dp) == 0xff) {
115 /* all tables in page are free, free page */
116 list_del(dp);
117 cache_page((void *)page);
118 free_page (page);
119 return 1;
120 } else if (ptable_list.next != dp) {
122 * move this descriptor to the front of the list, since
123 * it has one or more free tables.
125 list_move(dp, &ptable_list);
127 return 0;
130 /* invalidate page in both caches */
131 static inline void clear040(unsigned long paddr)
133 asm volatile (
134 "nop\n\t"
135 ".chip 68040\n\t"
136 "cinvp %%bc,(%0)\n\t"
137 ".chip 68k"
138 : : "a" (paddr));
141 /* invalidate page in i-cache */
142 static inline void cleari040(unsigned long paddr)
144 asm volatile (
145 "nop\n\t"
146 ".chip 68040\n\t"
147 "cinvp %%ic,(%0)\n\t"
148 ".chip 68k"
149 : : "a" (paddr));
152 /* push page in both caches */
153 /* RZ: cpush %bc DOES invalidate %ic, regardless of DPI */
154 static inline void push040(unsigned long paddr)
156 asm volatile (
157 "nop\n\t"
158 ".chip 68040\n\t"
159 "cpushp %%bc,(%0)\n\t"
160 ".chip 68k"
161 : : "a" (paddr));
164 /* push and invalidate page in both caches, must disable ints
165 * to avoid invalidating valid data */
166 static inline void pushcl040(unsigned long paddr)
168 unsigned long flags;
170 local_irq_save(flags);
171 push040(paddr);
172 if (CPU_IS_060)
173 clear040(paddr);
174 local_irq_restore(flags);
178 * 040: Hit every page containing an address in the range paddr..paddr+len-1.
179 * (Low order bits of the ea of a CINVP/CPUSHP are "don't care"s).
180 * Hit every page until there is a page or less to go. Hit the next page,
181 * and the one after that if the range hits it.
183 /* ++roman: A little bit more care is required here: The CINVP instruction
184 * invalidates cache entries WITHOUT WRITING DIRTY DATA BACK! So the beginning
185 * and the end of the region must be treated differently if they are not
186 * exactly at the beginning or end of a page boundary. Else, maybe too much
187 * data becomes invalidated and thus lost forever. CPUSHP does what we need:
188 * it invalidates the page after pushing dirty data to memory. (Thanks to Jes
189 * for discovering the problem!)
191 /* ... but on the '060, CPUSH doesn't invalidate (for us, since we have set
192 * the DPI bit in the CACR; would it cause problems with temporarily changing
193 * this?). So we have to push first and then additionally to invalidate.
198 * cache_clear() semantics: Clear any cache entries for the area in question,
199 * without writing back dirty entries first. This is useful if the data will
200 * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
201 * _physical_ address.
204 void cache_clear (unsigned long paddr, int len)
206 if (CPU_IS_040_OR_060) {
207 int tmp;
210 * We need special treatment for the first page, in case it
211 * is not page-aligned. Page align the addresses to work
212 * around bug I17 in the 68060.
214 if ((tmp = -paddr & (PAGE_SIZE - 1))) {
215 pushcl040(paddr & PAGE_MASK);
216 if ((len -= tmp) <= 0)
217 return;
218 paddr += tmp;
220 tmp = PAGE_SIZE;
221 paddr &= PAGE_MASK;
222 while ((len -= tmp) >= 0) {
223 clear040(paddr);
224 paddr += tmp;
226 if ((len += tmp))
227 /* a page boundary gets crossed at the end */
228 pushcl040(paddr);
230 else /* 68030 or 68020 */
231 asm volatile ("movec %/cacr,%/d0\n\t"
232 "oriw %0,%/d0\n\t"
233 "movec %/d0,%/cacr"
234 : : "i" (FLUSH_I_AND_D)
235 : "d0");
236 #ifdef CONFIG_M68K_L2_CACHE
237 if(mach_l2_flush)
238 mach_l2_flush(0);
239 #endif
241 EXPORT_SYMBOL(cache_clear);
245 * cache_push() semantics: Write back any dirty cache data in the given area,
246 * and invalidate the range in the instruction cache. It needs not (but may)
247 * invalidate those entries also in the data cache. The range is defined by a
248 * _physical_ address.
251 void cache_push (unsigned long paddr, int len)
253 if (CPU_IS_040_OR_060) {
254 int tmp = PAGE_SIZE;
257 * on 68040 or 68060, push cache lines for pages in the range;
258 * on the '040 this also invalidates the pushed lines, but not on
259 * the '060!
261 len += paddr & (PAGE_SIZE - 1);
264 * Work around bug I17 in the 68060 affecting some instruction
265 * lines not being invalidated properly.
267 paddr &= PAGE_MASK;
269 do {
270 push040(paddr);
271 paddr += tmp;
272 } while ((len -= tmp) > 0);
275 * 68030/68020 have no writeback cache. On the other hand,
276 * cache_push is actually a superset of cache_clear (the lines
277 * get written back and invalidated), so we should make sure
278 * to perform the corresponding actions. After all, this is getting
279 * called in places where we've just loaded code, or whatever, so
280 * flushing the icache is appropriate; flushing the dcache shouldn't
281 * be required.
283 else /* 68030 or 68020 */
284 asm volatile ("movec %/cacr,%/d0\n\t"
285 "oriw %0,%/d0\n\t"
286 "movec %/d0,%/cacr"
287 : : "i" (FLUSH_I)
288 : "d0");
289 #ifdef CONFIG_M68K_L2_CACHE
290 if(mach_l2_flush)
291 mach_l2_flush(1);
292 #endif
294 EXPORT_SYMBOL(cache_push);