arch/arm/mach-ixp2000/pci.c

   1 /*
   2  * arch/arm/mach-ixp2000/pci.c
   3  *
   4  * PCI routines for IXDP2400/IXDP2800 boards
   5  *
   6  * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
   7  * Maintained by: Deepak Saxena <dsaxena@plexity.net>
   8  *
   9  * Copyright 2002 Intel Corp.
  10  * Copyright (C) 2003-2004 MontaVista Software, Inc.
  11  *
  12  *  This program is free software; you can redistribute  it and/or modify it
  13  *  under  the terms of  the GNU General  Public License as published by the
  14  *  Free Software Foundation;  either version 2 of the  License, or (at your
  15  *  option) any later version.
  16  */
  17
  18 #include <linux/sched.h>
  19 #include <linux/kernel.h>
  20 #include <linux/pci.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/mm.h>
  23 #include <linux/init.h>
  24 #include <linux/ioport.h>
  25 #include <linux/delay.h>
  26 #include <linux/io.h>
  27
  28 #include <asm/irq.h>
  29 #include <asm/system.h>
  30 #include <mach/hardware.h>
  31
  32 #include <asm/mach/pci.h>
  33
  34 static volatile int pci_master_aborts = 0;
  35
  36 static int clear_master_aborts(void);
  37
  38 u32 *
  39 ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
  40 {
  41         u32 *paddress;
  42
  43         if (PCI_SLOT(devfn) > 7)
  44                 return 0;
  45
  46         /* Must be dword aligned */
  47         where &= ~3;
  48
  49         /*
  50          * For top bus, generate type 0, else type 1
  51          */
  52         if (!bus_nr) {
  53                 /* only bits[23:16] are used for IDSEL */
  54                 paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
  55                                     | (1 << (PCI_SLOT(devfn) + 16))
  56                                     | (PCI_FUNC(devfn) << 8) | where);
  57         } else {
  58                 paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE
  59                                     | (bus_nr << 16)
  60                                     | (PCI_SLOT(devfn) << 11)
  61                                     | (PCI_FUNC(devfn) << 8) | where);
  62         }
  63
  64         return paddress;
  65 }
  66
  67 /*
  68  * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
  69  * 0 and 3 are not valid indexes...
  70  */
  71 static u32 bytemask[] = {
  72         /*0*/   0,
  73         /*1*/   0xff,
  74         /*2*/   0xffff,
  75         /*3*/   0,
  76         /*4*/   0xffffffff,
  77 };
  78
  79
  80 int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
  81                                 int size, u32 *value)
  82 {
  83         u32 n;
  84         u32 *addr;
  85
  86         n = where % 4;
  87
  88         addr = ixp2000_pci_config_addr(bus->number, devfn, where);
  89         if (!addr)
  90                 return PCIBIOS_DEVICE_NOT_FOUND;
  91
  92         pci_master_aborts = 0;
  93         *value = (*addr >> (8*n)) & bytemask[size];
  94         if (pci_master_aborts) {
  95                 pci_master_aborts = 0;
  96                 *value = 0xffffffff;
  97                 return PCIBIOS_DEVICE_NOT_FOUND;
  98         }
  99
 100         return PCIBIOS_SUCCESSFUL;
 101 }
 102
 103 /*
 104  * We don't do error checks by calling clear_master_aborts() b/c the
 105  * assumption is that the caller did a read first to make sure a device
 106  * exists.
 107  */
 108 int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 109                                 int size, u32 value)
 110 {
 111         u32 mask;
 112         u32 *addr;
 113         u32 temp;
 114
 115         mask = ~(bytemask[size] << ((where % 0x4) * 8));
 116         addr = ixp2000_pci_config_addr(bus->number, devfn, where);
 117         if (!addr)
 118                 return PCIBIOS_DEVICE_NOT_FOUND;
 119         temp = (u32) (value) << ((where % 0x4) * 8);
 120         *addr = (*addr & mask) | temp;
 121
 122         clear_master_aborts();
 123
 124         return PCIBIOS_SUCCESSFUL;
 125 }
 126
 127
 128 static struct pci_ops ixp2000_pci_ops = {
 129         .read   = ixp2000_pci_read_config,
 130         .write  = ixp2000_pci_write_config
 131 };
 132
 133 struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
 134 {
 135         return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
 136                                  sysdata, &sysdata->resources);
 137 }
 138
 139
 140 int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 141 {
 142
 143         volatile u32 temp;
 144         unsigned long flags;
 145
 146         pci_master_aborts = 1;
 147
 148         local_irq_save(flags);
 149         temp = *(IXP2000_PCI_CONTROL);
 150         if (temp & ((1 << 8) | (1 << 5))) {
 151                 ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 152         }
 153
 154         temp = *(IXP2000_PCI_CMDSTAT);
 155         if (temp & (1 << 29)) {
 156                 while (temp & (1 << 29)) {
 157                         ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
 158                         temp = *(IXP2000_PCI_CMDSTAT);
 159                 }
 160         }
 161         local_irq_restore(flags);
 162
 163         /*
 164          * If it was an imprecise abort, then we need to correct the
 165          * return address to be _after_ the instruction.
 166          */
 167         if (fsr & (1 << 10))
 168                 regs->ARM_pc += 4;
 169
 170         return 0;
 171 }
 172
 173 int
 174 clear_master_aborts(void)
 175 {
 176         volatile u32 temp;
 177         unsigned long flags;
 178
 179         local_irq_save(flags);
 180         temp = *(IXP2000_PCI_CONTROL);
 181         if (temp & ((1 << 8) | (1 << 5))) {
 182                 ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
 183         }
 184
 185         temp = *(IXP2000_PCI_CMDSTAT);
 186         if (temp & (1 << 29)) {
 187                 while (temp & (1 << 29)) {
 188                         ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
 189                         temp = *(IXP2000_PCI_CMDSTAT);
 190                 }
 191         }
 192         local_irq_restore(flags);
 193
 194         return 0;
 195 }
 196
 197 void __init
 198 ixp2000_pci_preinit(void)
 199 {
 200         pci_set_flags(0);
 201
 202         pcibios_min_io = 0;
 203         pcibios_min_mem = 0;
 204
 205 #ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
 206         /*
 207          * Configure the PCI unit to properly byteswap I/O transactions,
 208          * and verify that it worked.
 209          */
 210         ixp2000_reg_write(IXP2000_PCI_CONTROL,
 211                           (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
 212
 213         if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
 214                 panic("IXP2000: PCI I/O is broken on this ixp model, and "
 215                         "the needed workaround has not been configured in");
 216 #endif
 217
 218         hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
 219                                 "PCI config cycle to non-existent device");
 220 }
 221
 222
 223 /*
 224  * IXP2000 systems often have large resource requirements, so we just
 225  * use our own resource space.
 226  */
 227 static struct resource ixp2000_pci_mem_space = {
 228         .start  = 0xe0000000,
 229         .end    = 0xffffffff,
 230         .flags  = IORESOURCE_MEM,
 231         .name   = "PCI Mem Space"
 232 };
 233
 234 static struct resource ixp2000_pci_io_space = {
 235         .start  = 0x00010000,
 236         .end    = 0x0001ffff,
 237         .flags  = IORESOURCE_IO,
 238         .name   = "PCI I/O Space"
 239 };
 240
 241 int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
 242 {
 243         if (nr >= 1)
 244                 return 0;
 245
 246         pci_add_resource(&sys->resources, &ixp2000_pci_io_space);
 247         pci_add_resource(&sys->resources, &ixp2000_pci_mem_space);
 248
 249         return 1;
 250 }
 251