arch/arm/mach-omap2/board-4430sdp.c

   1 /*
   2  * Board support file for OMAP4430 SDP.
   3  *
   4  * Copyright (C) 2009 Texas Instruments
   5  *
   6  * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
   7  *
   8  * Based on mach-omap2/board-3430sdp.c
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/io.h>
  19 #include <linux/gpio.h>
  20 #include <linux/usb/otg.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/i2c/twl.h>
  23 #include <linux/gpio_keys.h>
  24 #include <linux/regulator/machine.h>
  25 #include <linux/regulator/fixed.h>
  26 #include <linux/leds.h>
  27 #include <linux/leds_pwm.h>
  28
  29 #include <mach/hardware.h>
  30 #include <asm/hardware/gic.h>
  31 #include <asm/mach-types.h>
  32 #include <asm/mach/arch.h>
  33 #include <asm/mach/map.h>
  34
  35 #include <plat/board.h>
  36 #include "common.h"
  37 #include <plat/usb.h>
  38 #include <plat/mmc.h>
  39 #include <plat/omap4-keypad.h>
  40 #include <video/omapdss.h>
  41 #include <video/omap-panel-nokia-dsi.h>
  42 #include <video/omap-panel-picodlp.h>
  43 #include <linux/wl12xx.h>
  44
  45 #include "mux.h"
  46 #include "hsmmc.h"
  47 #include "control.h"
  48 #include "common-board-devices.h"
  49
  50 #define ETH_KS8851_IRQ                  34
  51 #define ETH_KS8851_POWER_ON             48
  52 #define ETH_KS8851_QUART                138
  53 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO        184
  54 #define OMAP4_SFH7741_ENABLE_GPIO               188
  55 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
  56 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
  57 #define HDMI_GPIO_HPD  63 /* Hotplug detect */
  58 #define DISPLAY_SEL_GPIO        59      /* LCD2/PicoDLP switch */
  59 #define DLP_POWER_ON_GPIO       40
  60
  61 #define GPIO_WIFI_PMENA         54
  62 #define GPIO_WIFI_IRQ           53
  63
  64 static const int sdp4430_keymap[] = {
  65         KEY(0, 0, KEY_E),
  66         KEY(0, 1, KEY_R),
  67         KEY(0, 2, KEY_T),
  68         KEY(0, 3, KEY_HOME),
  69         KEY(0, 4, KEY_F5),
  70         KEY(0, 5, KEY_UNKNOWN),
  71         KEY(0, 6, KEY_I),
  72         KEY(0, 7, KEY_LEFTSHIFT),
  73
  74         KEY(1, 0, KEY_D),
  75         KEY(1, 1, KEY_F),
  76         KEY(1, 2, KEY_G),
  77         KEY(1, 3, KEY_SEND),
  78         KEY(1, 4, KEY_F6),
  79         KEY(1, 5, KEY_UNKNOWN),
  80         KEY(1, 6, KEY_K),
  81         KEY(1, 7, KEY_ENTER),
  82
  83         KEY(2, 0, KEY_X),
  84         KEY(2, 1, KEY_C),
  85         KEY(2, 2, KEY_V),
  86         KEY(2, 3, KEY_END),
  87         KEY(2, 4, KEY_F7),
  88         KEY(2, 5, KEY_UNKNOWN),
  89         KEY(2, 6, KEY_DOT),
  90         KEY(2, 7, KEY_CAPSLOCK),
  91
  92         KEY(3, 0, KEY_Z),
  93         KEY(3, 1, KEY_KPPLUS),
  94         KEY(3, 2, KEY_B),
  95         KEY(3, 3, KEY_F1),
  96         KEY(3, 4, KEY_F8),
  97         KEY(3, 5, KEY_UNKNOWN),
  98         KEY(3, 6, KEY_O),
  99         KEY(3, 7, KEY_SPACE),
 100
 101         KEY(4, 0, KEY_W),
 102         KEY(4, 1, KEY_Y),
 103         KEY(4, 2, KEY_U),
 104         KEY(4, 3, KEY_F2),
 105         KEY(4, 4, KEY_VOLUMEUP),
 106         KEY(4, 5, KEY_UNKNOWN),
 107         KEY(4, 6, KEY_L),
 108         KEY(4, 7, KEY_LEFT),
 109
 110         KEY(5, 0, KEY_S),
 111         KEY(5, 1, KEY_H),
 112         KEY(5, 2, KEY_J),
 113         KEY(5, 3, KEY_F3),
 114         KEY(5, 4, KEY_F9),
 115         KEY(5, 5, KEY_VOLUMEDOWN),
 116         KEY(5, 6, KEY_M),
 117         KEY(5, 7, KEY_RIGHT),
 118
 119         KEY(6, 0, KEY_Q),
 120         KEY(6, 1, KEY_A),
 121         KEY(6, 2, KEY_N),
 122         KEY(6, 3, KEY_BACK),
 123         KEY(6, 4, KEY_BACKSPACE),
 124         KEY(6, 5, KEY_UNKNOWN),
 125         KEY(6, 6, KEY_P),
 126         KEY(6, 7, KEY_UP),
 127
 128         KEY(7, 0, KEY_PROG1),
 129         KEY(7, 1, KEY_PROG2),
 130         KEY(7, 2, KEY_PROG3),
 131         KEY(7, 3, KEY_PROG4),
 132         KEY(7, 4, KEY_F4),
 133         KEY(7, 5, KEY_UNKNOWN),
 134         KEY(7, 6, KEY_OK),
 135         KEY(7, 7, KEY_DOWN),
 136 };
 137 static struct omap_device_pad keypad_pads[] = {
 138         {       .name   = "kpd_col1.kpd_col1",
 139                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 140         },
 141         {       .name   = "kpd_col1.kpd_col1",
 142                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 143         },
 144         {       .name   = "kpd_col2.kpd_col2",
 145                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 146         },
 147         {       .name   = "kpd_col3.kpd_col3",
 148                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 149         },
 150         {       .name   = "kpd_col4.kpd_col4",
 151                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 152         },
 153         {       .name   = "kpd_col5.kpd_col5",
 154                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 155         },
 156         {       .name   = "gpmc_a23.kpd_col7",
 157                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 158         },
 159         {       .name   = "gpmc_a22.kpd_col6",
 160                 .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
 161         },
 162         {       .name   = "kpd_row0.kpd_row0",
 163                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 164                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 165         },
 166         {       .name   = "kpd_row1.kpd_row1",
 167                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 168                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 169         },
 170         {       .name   = "kpd_row2.kpd_row2",
 171                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 172                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 173         },
 174         {       .name   = "kpd_row3.kpd_row3",
 175                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 176                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 177         },
 178         {       .name   = "kpd_row4.kpd_row4",
 179                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 180                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 181         },
 182         {       .name   = "kpd_row5.kpd_row5",
 183                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 184                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 185         },
 186         {       .name   = "gpmc_a18.kpd_row6",
 187                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 188                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 189         },
 190         {       .name   = "gpmc_a19.kpd_row7",
 191                 .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
 192                         OMAP_MUX_MODE1 | OMAP_INPUT_EN,
 193         },
 194 };
 195
 196 static struct matrix_keymap_data sdp4430_keymap_data = {
 197         .keymap                 = sdp4430_keymap,
 198         .keymap_size            = ARRAY_SIZE(sdp4430_keymap),
 199 };
 200
 201 static struct omap4_keypad_platform_data sdp4430_keypad_data = {
 202         .keymap_data            = &sdp4430_keymap_data,
 203         .rows                   = 8,
 204         .cols                   = 8,
 205 };
 206
 207 static struct omap_board_data keypad_data = {
 208         .id                     = 1,
 209         .pads                   = keypad_pads,
 210         .pads_cnt               = ARRAY_SIZE(keypad_pads),
 211 };
 212
 213 static struct gpio_led sdp4430_gpio_leds[] = {
 214         {
 215                 .name   = "omap4:green:debug0",
 216                 .gpio   = 61,
 217         },
 218         {
 219                 .name   = "omap4:green:debug1",
 220                 .gpio   = 30,
 221         },
 222         {
 223                 .name   = "omap4:green:debug2",
 224                 .gpio   = 7,
 225         },
 226         {
 227                 .name   = "omap4:green:debug3",
 228                 .gpio   = 8,
 229         },
 230         {
 231                 .name   = "omap4:green:debug4",
 232                 .gpio   = 50,
 233         },
 234         {
 235                 .name   = "omap4:blue:user",
 236                 .gpio   = 169,
 237         },
 238         {
 239                 .name   = "omap4:red:user",
 240                 .gpio   = 170,
 241         },
 242         {
 243                 .name   = "omap4:green:user",
 244                 .gpio   = 139,
 245         },
 246
 247 };
 248
 249 static struct gpio_keys_button sdp4430_gpio_keys[] = {
 250         {
 251                 .desc                   = "Proximity Sensor",
 252                 .type                   = EV_SW,
 253                 .code                   = SW_FRONT_PROXIMITY,
 254                 .gpio                   = OMAP4_SFH7741_SENSOR_OUTPUT_GPIO,
 255                 .active_low             = 0,
 256         }
 257 };
 258
 259 static struct gpio_led_platform_data sdp4430_led_data = {
 260         .leds   = sdp4430_gpio_leds,
 261         .num_leds       = ARRAY_SIZE(sdp4430_gpio_leds),
 262 };
 263
 264 static struct led_pwm sdp4430_pwm_leds[] = {
 265         {
 266                 .name           = "omap4:green:chrg",
 267                 .pwm_id         = 1,
 268                 .max_brightness = 255,
 269                 .pwm_period_ns  = 7812500,
 270         },
 271 };
 272
 273 static struct led_pwm_platform_data sdp4430_pwm_data = {
 274         .num_leds       = ARRAY_SIZE(sdp4430_pwm_leds),
 275         .leds           = sdp4430_pwm_leds,
 276 };
 277
 278 static struct platform_device sdp4430_leds_pwm = {
 279         .name   = "leds_pwm",
 280         .id     = -1,
 281         .dev    = {
 282                 .platform_data = &sdp4430_pwm_data,
 283         },
 284 };
 285
 286 static int omap_prox_activate(struct device *dev)
 287 {
 288         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
 289         return 0;
 290 }
 291
 292 static void omap_prox_deactivate(struct device *dev)
 293 {
 294         gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 0);
 295 }
 296
 297 static struct gpio_keys_platform_data sdp4430_gpio_keys_data = {
 298         .buttons        = sdp4430_gpio_keys,
 299         .nbuttons       = ARRAY_SIZE(sdp4430_gpio_keys),
 300         .enable         = omap_prox_activate,
 301         .disable        = omap_prox_deactivate,
 302 };
 303
 304 static struct platform_device sdp4430_gpio_keys_device = {
 305         .name   = "gpio-keys",
 306         .id     = -1,
 307         .dev    = {
 308                 .platform_data  = &sdp4430_gpio_keys_data,
 309         },
 310 };
 311
 312 static struct platform_device sdp4430_leds_gpio = {
 313         .name   = "leds-gpio",
 314         .id     = -1,
 315         .dev    = {
 316                 .platform_data = &sdp4430_led_data,
 317         },
 318 };
 319 static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
 320         {
 321                 .modalias               = "ks8851",
 322                 .bus_num                = 1,
 323                 .chip_select            = 0,
 324                 .max_speed_hz           = 24000000,
 325                 .irq                    = ETH_KS8851_IRQ,
 326         },
 327 };
 328
 329 static struct gpio sdp4430_eth_gpios[] __initdata = {
 330         { ETH_KS8851_POWER_ON,  GPIOF_OUT_INIT_HIGH,    "eth_power"     },
 331         { ETH_KS8851_QUART,     GPIOF_OUT_INIT_HIGH,    "quart"         },
 332         { ETH_KS8851_IRQ,       GPIOF_IN,               "eth_irq"       },
 333 };
 334
 335 static int __init omap_ethernet_init(void)
 336 {
 337         int status;
 338
 339         /* Request of GPIO lines */
 340         status = gpio_request_array(sdp4430_eth_gpios,
 341                                     ARRAY_SIZE(sdp4430_eth_gpios));
 342         if (status)
 343                 pr_err("Cannot request ETH GPIOs\n");
 344
 345         return status;
 346 }
 347
 348 static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
 349         REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
 350         REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
 351 };
 352
 353 static struct regulator_init_data sdp4430_vbat_data = {
 354         .constraints = {
 355                 .always_on      = 1,
 356         },
 357         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vbat_supply),
 358         .consumer_supplies      = sdp4430_vbat_supply,
 359 };
 360
 361 static struct fixed_voltage_config sdp4430_vbat_pdata = {
 362         .supply_name    = "VBAT",
 363         .microvolts     = 3750000,
 364         .init_data      = &sdp4430_vbat_data,
 365         .gpio           = -EINVAL,
 366 };
 367
 368 static struct platform_device sdp4430_vbat = {
 369         .name           = "reg-fixed-voltage",
 370         .id             = -1,
 371         .dev = {
 372                 .platform_data = &sdp4430_vbat_pdata,
 373         },
 374 };
 375
 376 static struct platform_device sdp4430_dmic_codec = {
 377         .name   = "dmic-codec",
 378         .id     = -1,
 379 };
 380
 381 static struct platform_device *sdp4430_devices[] __initdata = {
 382         &sdp4430_gpio_keys_device,
 383         &sdp4430_leds_gpio,
 384         &sdp4430_leds_pwm,
 385         &sdp4430_vbat,
 386         &sdp4430_dmic_codec,
 387 };
 388
 389 static struct omap_musb_board_data musb_board_data = {
 390         .interface_type         = MUSB_INTERFACE_UTMI,
 391         .mode                   = MUSB_OTG,
 392         .power                  = 100,
 393 };
 394
 395 static struct omap2_hsmmc_info mmc[] = {
 396         {
 397                 .mmc            = 2,
 398                 .caps           =  MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 399                 .gpio_cd        = -EINVAL,
 400                 .gpio_wp        = -EINVAL,
 401                 .nonremovable   = true,
 402                 .ocr_mask       = MMC_VDD_29_30,
 403                 .no_off_init    = true,
 404         },
 405         {
 406                 .mmc            = 1,
 407                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 408                 .gpio_cd        = -EINVAL,
 409                 .gpio_wp        = -EINVAL,
 410         },
 411         {
 412                 .mmc            = 5,
 413                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 414                 .pm_caps        = MMC_PM_KEEP_POWER,
 415                 .gpio_cd        = -EINVAL,
 416                 .gpio_wp        = -EINVAL,
 417                 .ocr_mask       = MMC_VDD_165_195,
 418                 .nonremovable   = true,
 419         },
 420         {}      /* Terminator */
 421 };
 422
 423 static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
 424         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
 425 };
 426
 427 static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
 428         .supply = "vmmc",
 429         .dev_name = "omap_hsmmc.4",
 430 };
 431
 432 static struct regulator_init_data sdp4430_vmmc5 = {
 433         .constraints = {
 434                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
 435         },
 436         .num_consumer_supplies = 1,
 437         .consumer_supplies = &omap4_sdp4430_vmmc5_supply,
 438 };
 439
 440 static struct fixed_voltage_config sdp4430_vwlan = {
 441         .supply_name            = "vwl1271",
 442         .microvolts             = 1800000, /* 1.8V */
 443         .gpio                   = GPIO_WIFI_PMENA,
 444         .startup_delay          = 70000, /* 70msec */
 445         .enable_high            = 1,
 446         .enabled_at_boot        = 0,
 447         .init_data              = &sdp4430_vmmc5,
 448 };
 449
 450 static struct platform_device omap_vwlan_device = {
 451         .name           = "reg-fixed-voltage",
 452         .id             = 1,
 453         .dev = {
 454                 .platform_data = &sdp4430_vwlan,
 455         },
 456 };
 457
 458 static int omap4_twl6030_hsmmc_late_init(struct device *dev)
 459 {
 460         int ret = 0;
 461         struct platform_device *pdev = container_of(dev,
 462                                 struct platform_device, dev);
 463         struct omap_mmc_platform_data *pdata = dev->platform_data;
 464
 465         /* Setting MMC1 Card detect Irq */
 466         if (pdev->id == 0) {
 467                 ret = twl6030_mmc_card_detect_config();
 468                 if (ret)
 469                         pr_err("Failed configuring MMC1 card detect\n");
 470                 pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
 471                                                 MMCDETECT_INTR_OFFSET;
 472                 pdata->slots[0].card_detect = twl6030_mmc_card_detect;
 473         }
 474         return ret;
 475 }
 476
 477 static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
 478 {
 479         struct omap_mmc_platform_data *pdata;
 480
 481         /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
 482         if (!dev) {
 483                 pr_err("Failed %s\n", __func__);
 484                 return;
 485         }
 486         pdata = dev->platform_data;
 487         pdata->init =   omap4_twl6030_hsmmc_late_init;
 488 }
 489
 490 static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 491 {
 492         struct omap2_hsmmc_info *c;
 493
 494         omap2_hsmmc_init(controllers);
 495         for (c = controllers; c->mmc; c++)
 496                 omap4_twl6030_hsmmc_set_late_init(c->dev);
 497
 498         return 0;
 499 }
 500
 501 static struct regulator_init_data sdp4430_vaux1 = {
 502         .constraints = {
 503                 .min_uV                 = 1000000,
 504                 .max_uV                 = 3000000,
 505                 .apply_uV               = true,
 506                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 507                                         | REGULATOR_MODE_STANDBY,
 508                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 509                                         | REGULATOR_CHANGE_MODE
 510                                         | REGULATOR_CHANGE_STATUS,
 511         },
 512         .num_consumer_supplies  = ARRAY_SIZE(sdp4430_vaux_supply),
 513         .consumer_supplies      = sdp4430_vaux_supply,
 514 };
 515
 516 static struct regulator_init_data sdp4430_vusim = {
 517         .constraints = {
 518                 .min_uV                 = 1200000,
 519                 .max_uV                 = 2900000,
 520                 .apply_uV               = true,
 521                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
 522                                         | REGULATOR_MODE_STANDBY,
 523                 .valid_ops_mask  = REGULATOR_CHANGE_VOLTAGE
 524                                         | REGULATOR_CHANGE_MODE
 525                                         | REGULATOR_CHANGE_STATUS,
 526         },
 527 };
 528
 529 static struct twl4030_codec_data twl6040_codec = {
 530         /* single-step ramp for headset and handsfree */
 531         .hs_left_step   = 0x0f,
 532         .hs_right_step  = 0x0f,
 533         .hf_left_step   = 0x1d,
 534         .hf_right_step  = 0x1d,
 535 };
 536
 537 static struct twl4030_vibra_data twl6040_vibra = {
 538         .vibldrv_res = 8,
 539         .vibrdrv_res = 3,
 540         .viblmotor_res = 10,
 541         .vibrmotor_res = 10,
 542         .vddvibl_uV = 0,        /* fixed volt supply - VBAT */
 543         .vddvibr_uV = 0,        /* fixed volt supply - VBAT */
 544 };
 545
 546 static struct twl4030_audio_data twl6040_audio = {
 547         .codec          = &twl6040_codec,
 548         .vibra          = &twl6040_vibra,
 549         .audpwron_gpio  = 127,
 550         .naudint_irq    = OMAP44XX_IRQ_SYS_2N,
 551         .irq_base       = TWL6040_CODEC_IRQ_BASE,
 552 };
 553
 554 static struct twl4030_platform_data sdp4430_twldata = {
 555         .audio          = &twl6040_audio,
 556         /* Regulators */
 557         .vusim          = &sdp4430_vusim,
 558         .vaux1          = &sdp4430_vaux1,
 559 };
 560
 561 static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
 562         {
 563                 I2C_BOARD_INFO("tmp105", 0x48),
 564         },
 565         {
 566                 I2C_BOARD_INFO("bh1780", 0x29),
 567         },
 568 };
 569 static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 570         {
 571                 I2C_BOARD_INFO("hmc5843", 0x1e),
 572         },
 573 };
 574 static int __init omap4_i2c_init(void)
 575 {
 576         omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
 577                         TWL_COMMON_REGULATOR_VDAC |
 578                         TWL_COMMON_REGULATOR_VAUX2 |
 579                         TWL_COMMON_REGULATOR_VAUX3 |
 580                         TWL_COMMON_REGULATOR_VMMC |
 581                         TWL_COMMON_REGULATOR_VPP |
 582                         TWL_COMMON_REGULATOR_VANA |
 583                         TWL_COMMON_REGULATOR_VCXIO |
 584                         TWL_COMMON_REGULATOR_VUSB |
 585                         TWL_COMMON_REGULATOR_CLK32KG);
 586         omap4_pmic_init("twl6030", &sdp4430_twldata);
 587         omap_register_i2c_bus(2, 400, NULL, 0);
 588         omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 589                                 ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
 590         omap_register_i2c_bus(4, 400, sdp4430_i2c_4_boardinfo,
 591                                 ARRAY_SIZE(sdp4430_i2c_4_boardinfo));
 592         return 0;
 593 }
 594
 595 static void __init omap_sfh7741prox_init(void)
 596 {
 597         int error;
 598
 599         error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO,
 600                                  GPIOF_OUT_INIT_LOW, "sfh7741");
 601         if (error < 0)
 602                 pr_err("%s:failed to request GPIO %d, error %d\n",
 603                         __func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 604 }
 605
 606 static struct gpio sdp4430_hdmi_gpios[] = {
 607         { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
 608         { HDMI_GPIO_LS_OE,      GPIOF_OUT_INIT_HIGH,    "hdmi_gpio_ls_oe" },
 609         { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
 610 };
 611
 612 static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
 613 {
 614         int status;
 615
 616         status = gpio_request_array(sdp4430_hdmi_gpios,
 617                                     ARRAY_SIZE(sdp4430_hdmi_gpios));
 618         if (status)
 619                 pr_err("%s: Cannot request HDMI GPIOs\n", __func__);
 620
 621         return status;
 622 }
 623
 624 static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
 625 {
 626         gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
 627 }
 628
 629 static struct nokia_dsi_panel_data dsi1_panel = {
 630                 .name           = "taal",
 631                 .reset_gpio     = 102,
 632                 .use_ext_te     = false,
 633                 .ext_te_gpio    = 101,
 634                 .esd_interval   = 0,
 635 };
 636
 637 static struct omap_dss_device sdp4430_lcd_device = {
 638         .name                   = "lcd",
 639         .driver_name            = "taal",
 640         .type                   = OMAP_DISPLAY_TYPE_DSI,
 641         .data                   = &dsi1_panel,
 642         .phy.dsi                = {
 643                 .clk_lane       = 1,
 644                 .clk_pol        = 0,
 645                 .data1_lane     = 2,
 646                 .data1_pol      = 0,
 647                 .data2_lane     = 3,
 648                 .data2_pol      = 0,
 649
 650                 .module         = 0,
 651         },
 652
 653         .clocks = {
 654                 .dispc = {
 655                         .channel = {
 656                                 /* Logic Clock = 172.8 MHz */
 657                                 .lck_div        = 1,
 658                                 /* Pixel Clock = 34.56 MHz */
 659                                 .pck_div        = 5,
 660                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
 661                         },
 662                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 663                 },
 664
 665                 .dsi = {
 666                         .regn           = 16,   /* Fint = 2.4 MHz */
 667                         .regm           = 180,  /* DDR Clock = 216 MHz */
 668                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 669                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 670
 671                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 672                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
 673                 },
 674         },
 675         .channel                = OMAP_DSS_CHANNEL_LCD,
 676 };
 677
 678 static struct nokia_dsi_panel_data dsi2_panel = {
 679                 .name           = "taal",
 680                 .reset_gpio     = 104,
 681                 .use_ext_te     = false,
 682                 .ext_te_gpio    = 103,
 683                 .esd_interval   = 0,
 684 };
 685
 686 static struct omap_dss_device sdp4430_lcd2_device = {
 687         .name                   = "lcd2",
 688         .driver_name            = "taal",
 689         .type                   = OMAP_DISPLAY_TYPE_DSI,
 690         .data                   = &dsi2_panel,
 691         .phy.dsi                = {
 692                 .clk_lane       = 1,
 693                 .clk_pol        = 0,
 694                 .data1_lane     = 2,
 695                 .data1_pol      = 0,
 696                 .data2_lane     = 3,
 697                 .data2_pol      = 0,
 698
 699                 .module         = 1,
 700         },
 701
 702         .clocks = {
 703                 .dispc = {
 704                         .channel = {
 705                                 /* Logic Clock = 172.8 MHz */
 706                                 .lck_div        = 1,
 707                                 /* Pixel Clock = 34.56 MHz */
 708                                 .pck_div        = 5,
 709                                 .lcd_clk_src    = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
 710                         },
 711                         .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
 712                 },
 713
 714                 .dsi = {
 715                         .regn           = 16,   /* Fint = 2.4 MHz */
 716                         .regm           = 180,  /* DDR Clock = 216 MHz */
 717                         .regm_dispc     = 5,    /* PLL1_CLK1 = 172.8 MHz */
 718                         .regm_dsi       = 5,    /* PLL1_CLK2 = 172.8 MHz */
 719
 720                         .lp_clk_div     = 10,   /* LP Clock = 8.64 MHz */
 721                         .dsi_fclk_src   = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
 722                 },
 723         },
 724         .channel                = OMAP_DSS_CHANNEL_LCD2,
 725 };
 726
 727 static void sdp4430_lcd_init(void)
 728 {
 729         int r;
 730
 731         r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
 732                 "lcd1_reset_gpio");
 733         if (r)
 734                 pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
 735
 736         r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
 737                 "lcd2_reset_gpio");
 738         if (r)
 739                 pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
 740 }
 741
 742 static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
 743         .hpd_gpio = HDMI_GPIO_HPD,
 744 };
 745
 746 static struct omap_dss_device sdp4430_hdmi_device = {
 747         .name = "hdmi",
 748         .driver_name = "hdmi_panel",
 749         .type = OMAP_DISPLAY_TYPE_HDMI,
 750         .platform_enable = sdp4430_panel_enable_hdmi,
 751         .platform_disable = sdp4430_panel_disable_hdmi,
 752         .channel = OMAP_DSS_CHANNEL_DIGIT,
 753         .data = &sdp4430_hdmi_data,
 754 };
 755
 756 static struct picodlp_panel_data sdp4430_picodlp_pdata = {
 757         .picodlp_adapter_id     = 2,
 758         .emu_done_gpio          = 44,
 759         .pwrgood_gpio           = 45,
 760 };
 761
 762 static void sdp4430_picodlp_init(void)
 763 {
 764         int r;
 765         const struct gpio picodlp_gpios[] = {
 766                 {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
 767                         "DLP POWER ON"},
 768                 {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
 769                         "DLP EMU DONE"},
 770                 {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
 771                         "DLP PWRGOOD"},
 772         };
 773
 774         r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
 775         if (r)
 776                 pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
 777 }
 778
 779 static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
 780 {
 781         gpio_set_value(DISPLAY_SEL_GPIO, 0);
 782         gpio_set_value(DLP_POWER_ON_GPIO, 1);
 783
 784         return 0;
 785 }
 786
 787 static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
 788 {
 789         gpio_set_value(DLP_POWER_ON_GPIO, 0);
 790         gpio_set_value(DISPLAY_SEL_GPIO, 1);
 791 }
 792
 793 static struct omap_dss_device sdp4430_picodlp_device = {
 794         .name                   = "picodlp",
 795         .driver_name            = "picodlp_panel",
 796         .type                   = OMAP_DISPLAY_TYPE_DPI,
 797         .phy.dpi.data_lines     = 24,
 798         .channel                = OMAP_DSS_CHANNEL_LCD2,
 799         .platform_enable        = sdp4430_panel_enable_picodlp,
 800         .platform_disable       = sdp4430_panel_disable_picodlp,
 801         .data                   = &sdp4430_picodlp_pdata,
 802 };
 803
 804 static struct omap_dss_device *sdp4430_dss_devices[] = {
 805         &sdp4430_lcd_device,
 806         &sdp4430_lcd2_device,
 807         &sdp4430_hdmi_device,
 808         &sdp4430_picodlp_device,
 809 };
 810
 811 static struct omap_dss_board_info sdp4430_dss_data = {
 812         .num_devices    = ARRAY_SIZE(sdp4430_dss_devices),
 813         .devices        = sdp4430_dss_devices,
 814         .default_device = &sdp4430_lcd_device,
 815 };
 816
 817 static void __init omap_4430sdp_display_init(void)
 818 {
 819         int r;
 820
 821         /* Enable LCD2 by default (instead of Pico DLP) */
 822         r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
 823                         "display_sel");
 824         if (r)
 825                 pr_err("%s: Could not get display_sel GPIO\n", __func__);
 826
 827         sdp4430_lcd_init();
 828         sdp4430_picodlp_init();
 829         omap_display_init(&sdp4430_dss_data);
 830         /*
 831          * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
 832          * later have external pull up on the HDMI I2C lines
 833          */
 834         if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
 835                 omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
 836         else
 837                 omap_hdmi_init(0);
 838
 839         omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
 840         omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
 841         omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
 842 }
 843
 844 #ifdef CONFIG_OMAP_MUX
 845 static struct omap_board_mux board_mux[] __initdata = {
 846         OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 847         { .reg_offset = OMAP_MUX_TERMINATOR },
 848 };
 849
 850 #else
 851 #define board_mux       NULL
 852  #endif
 853
 854 static void __init omap4_sdp4430_wifi_mux_init(void)
 855 {
 856         omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
 857                                 OMAP_PIN_OFF_WAKEUPENABLE);
 858         omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
 859
 860         omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
 861                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 862         omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
 863                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 864         omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
 865                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 866         omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
 867                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 868         omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
 869                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 870         omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
 871                                 OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
 872
 873 }
 874
 875 static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
 876         .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
 877         .board_ref_clock = WL12XX_REFCLOCK_26,
 878         .board_tcxo_clock = WL12XX_TCXOCLOCK_26,
 879 };
 880
 881 static void __init omap4_sdp4430_wifi_init(void)
 882 {
 883         int ret;
 884
 885         omap4_sdp4430_wifi_mux_init();
 886         ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
 887         if (ret)
 888                 pr_err("Error setting wl12xx data: %d\n", ret);
 889         ret = platform_device_register(&omap_vwlan_device);
 890         if (ret)
 891                 pr_err("Error registering wl12xx device: %d\n", ret);
 892 }
 893
 894 static void __init omap_4430sdp_init(void)
 895 {
 896         int status;
 897         int package = OMAP_PACKAGE_CBS;
 898
 899         if (omap_rev() == OMAP4430_REV_ES1_0)
 900                 package = OMAP_PACKAGE_CBL;
 901         omap4_mux_init(board_mux, NULL, package);
 902
 903         omap4_i2c_init();
 904         omap_sfh7741prox_init();
 905         platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 906         omap_serial_init();
 907         omap_sdrc_init(NULL, NULL);
 908         omap4_sdp4430_wifi_init();
 909         omap4_twl6030_hsmmc_init(mmc);
 910
 911         usb_musb_init(&musb_board_data);
 912
 913         status = omap_ethernet_init();
 914         if (status) {
 915                 pr_err("Ethernet initialization failed: %d\n", status);
 916         } else {
 917                 sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
 918                 spi_register_board_info(sdp4430_spi_board_info,
 919                                 ARRAY_SIZE(sdp4430_spi_board_info));
 920         }
 921
 922         status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
 923         if (status)
 924                 pr_err("Keypad initialization failed: %d\n", status);
 925
 926         omap_4430sdp_display_init();
 927 }
 928
 929 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 930         /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 931         .atag_offset    = 0x100,
 932         .reserve        = omap_reserve,
 933         .map_io         = omap4_map_io,
 934         .init_early     = omap4430_init_early,
 935         .init_irq       = gic_init_irq,
 936         .handle_irq     = gic_handle_irq,
 937         .init_machine   = omap_4430sdp_init,
 938         .timer          = &omap4_timer,
 939         .restart        = omap_prcm_restart,
 940 MACHINE_END