| blob | 114c037e433c77f33673c39c599dd3d32190187e |
1 /*
2 * OMAP2/3 System Control Module register access
3 *
4 * Copyright (C) 2007 Texas Instruments, Inc.
5 * Copyright (C) 2007 Nokia Corporation
6 *
7 * Written by Paul Walmsley
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13 #undef DEBUG
15 #include <linux/kernel.h>
16 #include <linux/io.h>
19 #include <plat/sdrc.h>
29 /* Used by omap3_ctrl_save_padconf() */
30 #define START_PADCONF_SAVE 0x2
31 #define PADCONF_SAVE_DONE 0x1
36 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
38 u32 boot_config_ptr;
39 u32 public_restore_ptr;
40 u32 secure_ram_restore_ptr;
41 u32 sdrc_module_semaphore;
42 u32 prcm_block_offset;
43 u32 sdrc_block_offset;
44 };
47 u32 prm_clksrc_ctrl;
48 u32 prm_clksel;
49 u32 cm_clksel_core;
50 u32 cm_clksel_wkup;
51 u32 cm_clken_pll;
52 u32 cm_autoidle_pll;
53 u32 cm_clksel1_pll;
54 u32 cm_clksel2_pll;
55 u32 cm_clksel3_pll;
56 u32 cm_clken_pll_mpu;
57 u32 cm_autoidle_pll_mpu;
58 u32 cm_clksel1_pll_mpu;
59 u32 cm_clksel2_pll_mpu;
60 u32 prcm_block_size;
61 };
64 u16 sysconfig;
65 u16 cs_cfg;
66 u16 sharing;
67 u16 err_type;
68 u32 dll_a_ctrl;
69 u32 dll_b_ctrl;
70 u32 power;
71 u32 cs_0;
72 u32 mcfg_0;
73 u16 mr_0;
74 u16 emr_1_0;
75 u16 emr_2_0;
76 u16 emr_3_0;
77 u32 actim_ctrla_0;
78 u32 actim_ctrlb_0;
79 u32 rfr_ctrl_0;
80 u32 cs_1;
81 u32 mcfg_1;
82 u16 mr_1;
83 u16 emr_1_1;
84 u16 emr_2_1;
85 u16 emr_3_1;
86 u32 actim_ctrla_1;
87 u32 actim_ctrlb_1;
88 u32 rfr_ctrl_1;
89 u16 dcdl_1_ctrl;
90 u16 dcdl_2_ctrl;
91 u32 flags;
92 u32 block_size;
93 };
97 /*
98 * This is used to store ARM registers in SDRAM before attempting
99 * an MPU OFF. The save and restore happens from the SRAM sleep code.
100 * The address is stored in scratchpad, so that it can be used
101 * during the restore path.
102 */
106 u32 sysconfig;
107 u32 devconf0;
108 u32 mem_dftrw0;
109 u32 mem_dftrw1;
110 u32 msuspendmux_0;
111 u32 msuspendmux_1;
112 u32 msuspendmux_2;
113 u32 msuspendmux_3;
114 u32 msuspendmux_4;
115 u32 msuspendmux_5;
116 u32 sec_ctrl;
117 u32 devconf1;
118 u32 csirxfe;
119 u32 iva2_bootaddr;
120 u32 iva2_bootmod;
121 u32 debobs_0;
122 u32 debobs_1;
123 u32 debobs_2;
124 u32 debobs_3;
125 u32 debobs_4;
126 u32 debobs_5;
127 u32 debobs_6;
128 u32 debobs_7;
129 u32 debobs_8;
130 u32 prog_io0;
131 u32 prog_io1;
132 u32 dss_dpll_spreading;
133 u32 core_dpll_spreading;
134 u32 per_dpll_spreading;
135 u32 usbhost_dpll_spreading;
136 u32 pbias_lite;
137 u32 temp_sensor;
138 u32 sramldo4;
139 u32 sramldo5;
140 u32 csi;
141 u32 padconf_sys_nirq;
142 };
147 #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
148 #define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
151 {
157 }
160 {
162 }
165 {
167 }
170 {
172 }
175 {
177 }
180 {
182 }
185 {
187 }
190 {
192 }
194 /*
195 * On OMAP4 control pad are not addressable from control
196 * core base. So the common omap_ctrl_read/write APIs breaks
197 * Hence export separate APIs to manage the omap4 pad control
198 * registers. This APIs will work only for OMAP4
199 */
202 {
204 }
207 {
209 }
211 #ifdef CONFIG_ARCH_OMAP3
213 /**
214 * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
215 * @bootmode: 8-bit value to pass to some boot code
216 *
217 * Set the bootmode in the scratchpad RAM. This is used after the
218 * system restarts. Not sure what actually uses this - it may be the
219 * bootloader, rather than the boot ROM - contrary to the preserved
220 * comment below. No return value.
221 */
223 {
224 u32 l;
228 /*
229 * Reserve the first word in scratchpad for communicating
230 * with the boot ROM. A pointer to a data structure
231 * describing the boot process can be stored there,
232 * cf. OMAP34xx TRM, Initialization / Software Booting
233 * Configuration.
234 *
235 * XXX This should use some omap_ctrl_writel()-type function
236 */
238 }
240 #endif
242 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
243 /*
244 * Clears the scratchpad contents in case of cold boot-
245 * called during bootup
246 */
248 {
254 OMAP3430_GLOBAL_COLD_RST_MASK) {
258 OMAP3430_GR_MOD,
259 OMAP3_PRM_RSTST_OFFSET);
260 }
261 }
263 /* Populate the scratchpad structure with restore structure */
265 {
267 u32 arm_context_addr;
272 /*
273 * Populate the Scratchpad contents
274 *
275 * The "get_*restore_pointer" functions are used to provide a
276 * physical restore address where the ROM code jumps while waking
277 * up from MPU OFF/OSWR state.
278 * The restore pointer is stored into the scratchpad.
279 */
288 else
294 else
301 /* Populate the PRCM block contents */
304 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
307 OMAP3_PRM_CLKSEL_OFFSET);
314 /*
315 * As per erratum i671, ROM code does not respect the PER DPLL
316 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
317 * Then, in anycase, clear these bits to avoid extra latencies.
318 */
338 /* Populate the SDRC block contents */
349 /*
350 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
351 * be programed to issue automatic self refresh on timeout
352 * of AUTO_CNT = 1 prior to any transition to OFF mode.
353 */
358 SDRC_POWER_CLKCTRL_MASK)) |
360 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
361 else
395 /* Copy all the contents to the scratchpad location */
399 /* Scratchpad contents being 32 bits, a divide by 4 done here */
406 /*
407 * Copies the address of the location in SDRAM where ARM
408 * registers get saved during a MPU OFF transition.
409 */
413 }
416 {
471 }
474 {
478 OMAP343X_CONTROL_MEM_DFTRW0);
480 OMAP343X_CONTROL_MEM_DFTRW1);
482 OMAP2_CONTROL_MSUSPENDMUX_0);
484 OMAP2_CONTROL_MSUSPENDMUX_1);
486 OMAP2_CONTROL_MSUSPENDMUX_2);
488 OMAP2_CONTROL_MSUSPENDMUX_3);
490 OMAP2_CONTROL_MSUSPENDMUX_4);
492 OMAP2_CONTROL_MSUSPENDMUX_5);
497 OMAP343X_CONTROL_IVA2_BOOTADDR);
499 OMAP343X_CONTROL_IVA2_BOOTMOD);
512 OMAP343X_CONTROL_DSS_DPLL_SPREADING);
514 OMAP343X_CONTROL_CORE_DPLL_SPREADING);
516 OMAP343X_CONTROL_PER_DPLL_SPREADING);
518 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
520 OMAP343X_CONTROL_PBIAS_LITE);
522 OMAP343X_CONTROL_TEMP_SENSOR);
527 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
529 }
532 {
536 }
538 /**
539 * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
540 *
541 * Tell the SCM to start saving the padconf registers, then wait for
542 * the process to complete. Returns 0 unconditionally, although it
543 * should also eventually be able to return -ETIMEDOUT, if the save
544 * does not complete.
545 *
546 * XXX This function is missing a timeout. What should it be?
547 */
549 {
550 u32 cpo;
552 /* Save the padconf registers */
557 /* wait for the save to complete */
563 }