2 * arch/arm/mach-realview/realview_pbx.c
4 * Copyright (C) 2009 ARM Limited
5 * Copyright (C) 2000 Deep Blue Solutions Ltd
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #include <linux/init.h>
22 #include <linux/platform_device.h>
23 #include <linux/device.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl061.h>
26 #include <linux/amba/mmci.h>
27 #include <linux/amba/pl022.h>
32 #include <asm/mach-types.h>
34 #include <asm/smp_twd.h>
35 #include <asm/pgtable.h>
36 #include <asm/hardware/gic.h>
37 #include <asm/hardware/cache-l2x0.h>
39 #include <asm/mach/arch.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/time.h>
43 #include <mach/hardware.h>
44 #include <mach/board-pbx.h>
45 #include <mach/irqs.h>
49 static struct map_desc realview_pbx_io_desc
[] __initdata
= {
51 .virtual = IO_ADDRESS(REALVIEW_SYS_BASE
),
52 .pfn
= __phys_to_pfn(REALVIEW_SYS_BASE
),
56 .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE
),
57 .pfn
= __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE
),
61 .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE
),
62 .pfn
= __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE
),
66 .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE
),
67 .pfn
= __phys_to_pfn(REALVIEW_SCTL_BASE
),
71 .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE
),
72 .pfn
= __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE
),
76 .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE
),
77 .pfn
= __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE
),
83 .virtual = PCIX_UNIT_BASE
,
84 .pfn
= __phys_to_pfn(REALVIEW_PBX_PCI_BASE
),
85 .length
= REALVIEW_PBX_PCI_BASE_SIZE
,
89 #ifdef CONFIG_DEBUG_LL
91 .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE
),
92 .pfn
= __phys_to_pfn(REALVIEW_PBX_UART0_BASE
),
99 static struct map_desc realview_local_io_desc
[] __initdata
= {
101 .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_SCU_BASE
),
102 .pfn
= __phys_to_pfn(REALVIEW_PBX_TILE_SCU_BASE
),
106 .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE
),
107 .pfn
= __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE
),
111 .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE
),
112 .pfn
= __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE
),
118 static void __init
realview_pbx_map_io(void)
120 iotable_init(realview_pbx_io_desc
, ARRAY_SIZE(realview_pbx_io_desc
));
121 if (core_tile_pbx11mp() || core_tile_pbxa9mp())
122 iotable_init(realview_local_io_desc
, ARRAY_SIZE(realview_local_io_desc
));
125 static struct pl061_platform_data gpio0_plat_data
= {
129 static struct pl061_platform_data gpio1_plat_data
= {
133 static struct pl061_platform_data gpio2_plat_data
= {
137 static struct pl022_ssp_controller ssp0_plat_data
= {
144 * RealView PBXCore AMBA devices
147 #define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
148 #define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
149 #define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
150 #define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
151 #define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
152 #define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
153 #define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
154 #define MPMC_IRQ { NO_IRQ, NO_IRQ }
155 #define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
156 #define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
157 #define SCTL_IRQ { NO_IRQ, NO_IRQ }
158 #define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
159 #define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
160 #define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
161 #define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
162 #define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
163 #define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
164 #define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
165 #define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
166 #define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
167 #define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
169 /* FPGA Primecells */
170 AMBA_DEVICE(aaci
, "fpga:aaci", AACI
, NULL
);
171 AMBA_DEVICE(mmc0
, "fpga:mmc0", MMCI0
, &realview_mmc0_plat_data
);
172 AMBA_DEVICE(kmi0
, "fpga:kmi0", KMI0
, NULL
);
173 AMBA_DEVICE(kmi1
, "fpga:kmi1", KMI1
, NULL
);
174 AMBA_DEVICE(uart3
, "fpga:uart3", PBX_UART3
, NULL
);
176 /* DevChip Primecells */
177 AMBA_DEVICE(smc
, "dev:smc", PBX_SMC
, NULL
);
178 AMBA_DEVICE(sctl
, "dev:sctl", SCTL
, NULL
);
179 AMBA_DEVICE(wdog
, "dev:wdog", PBX_WATCHDOG
, NULL
);
180 AMBA_DEVICE(gpio0
, "dev:gpio0", PBX_GPIO0
, &gpio0_plat_data
);
181 AMBA_DEVICE(gpio1
, "dev:gpio1", GPIO1
, &gpio1_plat_data
);
182 AMBA_DEVICE(gpio2
, "dev:gpio2", GPIO2
, &gpio2_plat_data
);
183 AMBA_DEVICE(rtc
, "dev:rtc", PBX_RTC
, NULL
);
184 AMBA_DEVICE(sci0
, "dev:sci0", SCI
, NULL
);
185 AMBA_DEVICE(uart0
, "dev:uart0", PBX_UART0
, NULL
);
186 AMBA_DEVICE(uart1
, "dev:uart1", PBX_UART1
, NULL
);
187 AMBA_DEVICE(uart2
, "dev:uart2", PBX_UART2
, NULL
);
188 AMBA_DEVICE(ssp0
, "dev:ssp0", PBX_SSP
, &ssp0_plat_data
);
190 /* Primecells on the NEC ISSP chip */
191 AMBA_DEVICE(clcd
, "issp:clcd", PBX_CLCD
, &clcd_plat_data
);
192 AMBA_DEVICE(dmac
, "issp:dmac", DMAC
, NULL
);
194 static struct amba_device
*amba_devs
[] __initdata
= {
217 * RealView PB-X platform devices
219 static struct resource realview_pbx_flash_resources
[] = {
221 .start
= REALVIEW_PBX_FLASH0_BASE
,
222 .end
= REALVIEW_PBX_FLASH0_BASE
+ REALVIEW_PBX_FLASH0_SIZE
- 1,
223 .flags
= IORESOURCE_MEM
,
226 .start
= REALVIEW_PBX_FLASH1_BASE
,
227 .end
= REALVIEW_PBX_FLASH1_BASE
+ REALVIEW_PBX_FLASH1_SIZE
- 1,
228 .flags
= IORESOURCE_MEM
,
232 static struct resource realview_pbx_smsc911x_resources
[] = {
234 .start
= REALVIEW_PBX_ETH_BASE
,
235 .end
= REALVIEW_PBX_ETH_BASE
+ SZ_64K
- 1,
236 .flags
= IORESOURCE_MEM
,
239 .start
= IRQ_PBX_ETH
,
241 .flags
= IORESOURCE_IRQ
,
245 static struct resource realview_pbx_isp1761_resources
[] = {
247 .start
= REALVIEW_PBX_USB_BASE
,
248 .end
= REALVIEW_PBX_USB_BASE
+ SZ_128K
- 1,
249 .flags
= IORESOURCE_MEM
,
252 .start
= IRQ_PBX_USB
,
254 .flags
= IORESOURCE_IRQ
,
258 static struct resource pmu_resources
[] = {
260 .start
= IRQ_PBX_PMU_CPU0
,
261 .end
= IRQ_PBX_PMU_CPU0
,
262 .flags
= IORESOURCE_IRQ
,
265 .start
= IRQ_PBX_PMU_CPU1
,
266 .end
= IRQ_PBX_PMU_CPU1
,
267 .flags
= IORESOURCE_IRQ
,
270 .start
= IRQ_PBX_PMU_CPU2
,
271 .end
= IRQ_PBX_PMU_CPU2
,
272 .flags
= IORESOURCE_IRQ
,
275 .start
= IRQ_PBX_PMU_CPU3
,
276 .end
= IRQ_PBX_PMU_CPU3
,
277 .flags
= IORESOURCE_IRQ
,
281 static struct platform_device pmu_device
= {
283 .id
= ARM_PMU_DEVICE_CPU
,
284 .num_resources
= ARRAY_SIZE(pmu_resources
),
285 .resource
= pmu_resources
,
288 static void __init
gic_init_irq(void)
290 /* ARM PBX on-board GIC */
291 if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
292 gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE
),
293 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE
));
295 gic_init(0, IRQ_PBX_GIC_START
,
296 __io_address(REALVIEW_PBX_GIC_DIST_BASE
),
297 __io_address(REALVIEW_PBX_GIC_CPU_BASE
));
301 static void __init
realview_pbx_timer_init(void)
303 timer0_va_base
= __io_address(REALVIEW_PBX_TIMER0_1_BASE
);
304 timer1_va_base
= __io_address(REALVIEW_PBX_TIMER0_1_BASE
) + 0x20;
305 timer2_va_base
= __io_address(REALVIEW_PBX_TIMER2_3_BASE
);
306 timer3_va_base
= __io_address(REALVIEW_PBX_TIMER2_3_BASE
) + 0x20;
308 #ifdef CONFIG_LOCAL_TIMERS
309 if (core_tile_pbx11mp() || core_tile_pbxa9mp())
310 twd_base
= __io_address(REALVIEW_PBX_TILE_TWD_BASE
);
312 realview_timer_init(IRQ_PBX_TIMER0_1
);
315 static struct sys_timer realview_pbx_timer
= {
316 .init
= realview_pbx_timer_init
,
319 static void realview_pbx_fixup(struct tag
*tags
, char **from
,
320 struct meminfo
*meminfo
)
322 #ifdef CONFIG_SPARSEMEM
324 * Memory configuration with SPARSEMEM enabled on RealView PBX (see
325 * asm/mach/memory.h for more information).
327 meminfo
->bank
[0].start
= 0;
328 meminfo
->bank
[0].size
= SZ_256M
;
329 meminfo
->bank
[1].start
= 0x20000000;
330 meminfo
->bank
[1].size
= SZ_512M
;
331 meminfo
->bank
[2].start
= 0x80000000;
332 meminfo
->bank
[2].size
= SZ_256M
;
333 meminfo
->nr_banks
= 3;
335 realview_fixup(tags
, from
, meminfo
);
339 static void realview_pbx_restart(char mode
, const char *cmd
)
341 void __iomem
*reset_ctrl
= __io_address(REALVIEW_SYS_RESETCTL
);
342 void __iomem
*lock_ctrl
= __io_address(REALVIEW_SYS_LOCK
);
345 * To reset, we hit the on-board reset register
348 __raw_writel(REALVIEW_SYS_LOCK_VAL
, lock_ctrl
);
349 __raw_writel(0x00F0, reset_ctrl
);
350 __raw_writel(0x00F4, reset_ctrl
);
354 static void __init
realview_pbx_init(void)
358 #ifdef CONFIG_CACHE_L2X0
359 if (core_tile_pbxa9mp()) {
360 void __iomem
*l2x0_base
=
361 __io_address(REALVIEW_PBX_TILE_L220_BASE
);
363 /* set RAM latencies to 1 cycle for eASIC */
364 writel(0, l2x0_base
+ L2X0_TAG_LATENCY_CTRL
);
365 writel(0, l2x0_base
+ L2X0_DATA_LATENCY_CTRL
);
367 /* 16KB way size, 8-way associativity, parity disabled
368 * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
369 l2x0_init(l2x0_base
, 0x02520000, 0xc0000fff);
370 platform_device_register(&pmu_device
);
374 realview_flash_register(realview_pbx_flash_resources
,
375 ARRAY_SIZE(realview_pbx_flash_resources
));
376 realview_eth_register(NULL
, realview_pbx_smsc911x_resources
);
377 platform_device_register(&realview_i2c_device
);
378 platform_device_register(&realview_cf_device
);
379 realview_usb_register(realview_pbx_isp1761_resources
);
381 for (i
= 0; i
< ARRAY_SIZE(amba_devs
); i
++) {
382 struct amba_device
*d
= amba_devs
[i
];
383 amba_device_register(d
, &iomem_resource
);
387 leds_event
= realview_leds_event
;
391 MACHINE_START(REALVIEW_PBX
, "ARM-RealView PBX")
392 /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
393 .atag_offset
= 0x100,
394 .fixup
= realview_pbx_fixup
,
395 .map_io
= realview_pbx_map_io
,
396 .init_early
= realview_init_early
,
397 .init_irq
= gic_init_irq
,
398 .timer
= &realview_pbx_timer
,
399 .handle_irq
= gic_handle_irq
,
400 .init_machine
= realview_pbx_init
,
401 #ifdef CONFIG_ZONE_DMA
402 .dma_zone_size
= SZ_256M
,
404 .restart
= realview_pbx_restart
,