spi-topcliff-pch: Fix issue for transmitting over 4KByte
[zen-stable.git] / arch / arm / mach-s5pv210 / dma.c
bloba6113e0267f2e720027b1c2bb64f0ccd8e6298cc
1 /* linux/arch/arm/mach-s5pv210/dma.c
3 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com
6 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
7 * Jaswinder Singh <jassi.brar@samsung.com>
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
24 #include <linux/dma-mapping.h>
25 #include <linux/amba/bus.h>
26 #include <linux/amba/pl330.h>
28 #include <asm/irq.h>
29 #include <plat/devs.h>
30 #include <plat/irqs.h>
32 #include <mach/map.h>
33 #include <mach/irqs.h>
34 #include <mach/dma.h>
36 static u64 dma_dmamask = DMA_BIT_MASK(32);
38 u8 pdma0_peri[] = {
39 DMACH_UART0_RX,
40 DMACH_UART0_TX,
41 DMACH_UART1_RX,
42 DMACH_UART1_TX,
43 DMACH_UART2_RX,
44 DMACH_UART2_TX,
45 DMACH_UART3_RX,
46 DMACH_UART3_TX,
47 DMACH_MAX,
48 DMACH_I2S0_RX,
49 DMACH_I2S0_TX,
50 DMACH_I2S0S_TX,
51 DMACH_I2S1_RX,
52 DMACH_I2S1_TX,
53 DMACH_MAX,
54 DMACH_MAX,
55 DMACH_SPI0_RX,
56 DMACH_SPI0_TX,
57 DMACH_SPI1_RX,
58 DMACH_SPI1_TX,
59 DMACH_MAX,
60 DMACH_MAX,
61 DMACH_AC97_MICIN,
62 DMACH_AC97_PCMIN,
63 DMACH_AC97_PCMOUT,
64 DMACH_MAX,
65 DMACH_PWM,
66 DMACH_SPDIF,
69 struct dma_pl330_platdata s5pv210_pdma0_pdata = {
70 .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
71 .peri_id = pdma0_peri,
74 struct amba_device s5pv210_device_pdma0 = {
75 .dev = {
76 .init_name = "dma-pl330.0",
77 .dma_mask = &dma_dmamask,
78 .coherent_dma_mask = DMA_BIT_MASK(32),
79 .platform_data = &s5pv210_pdma0_pdata,
81 .res = {
82 .start = S5PV210_PA_PDMA0,
83 .end = S5PV210_PA_PDMA0 + SZ_4K,
84 .flags = IORESOURCE_MEM,
86 .irq = {IRQ_PDMA0, NO_IRQ},
87 .periphid = 0x00041330,
90 u8 pdma1_peri[] = {
91 DMACH_UART0_RX,
92 DMACH_UART0_TX,
93 DMACH_UART1_RX,
94 DMACH_UART1_TX,
95 DMACH_UART2_RX,
96 DMACH_UART2_TX,
97 DMACH_UART3_RX,
98 DMACH_UART3_TX,
99 DMACH_MAX,
100 DMACH_I2S0_RX,
101 DMACH_I2S0_TX,
102 DMACH_I2S0S_TX,
103 DMACH_I2S1_RX,
104 DMACH_I2S1_TX,
105 DMACH_I2S2_RX,
106 DMACH_I2S2_TX,
107 DMACH_SPI0_RX,
108 DMACH_SPI0_TX,
109 DMACH_SPI1_RX,
110 DMACH_SPI1_TX,
111 DMACH_MAX,
112 DMACH_MAX,
113 DMACH_PCM0_RX,
114 DMACH_PCM0_TX,
115 DMACH_PCM1_RX,
116 DMACH_PCM1_TX,
117 DMACH_MSM_REQ0,
118 DMACH_MSM_REQ1,
119 DMACH_MSM_REQ2,
120 DMACH_MSM_REQ3,
121 DMACH_PCM2_RX,
122 DMACH_PCM2_TX,
125 struct dma_pl330_platdata s5pv210_pdma1_pdata = {
126 .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
127 .peri_id = pdma1_peri,
130 struct amba_device s5pv210_device_pdma1 = {
131 .dev = {
132 .init_name = "dma-pl330.1",
133 .dma_mask = &dma_dmamask,
134 .coherent_dma_mask = DMA_BIT_MASK(32),
135 .platform_data = &s5pv210_pdma1_pdata,
137 .res = {
138 .start = S5PV210_PA_PDMA1,
139 .end = S5PV210_PA_PDMA1 + SZ_4K,
140 .flags = IORESOURCE_MEM,
142 .irq = {IRQ_PDMA1, NO_IRQ},
143 .periphid = 0x00041330,
146 static int __init s5pv210_dma_init(void)
148 dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
149 dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
150 amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
152 dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
153 dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
154 amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
156 return 0;
158 arch_initcall(s5pv210_dma_init);