?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
spi-topcliff-pch: Fix issue for transmitting over 4KByte
[zen-stable.git] / arch / blackfin / mach-bf537 / boards / stamp.c
blob2221173e489e5294f9c788ea33db0a9e9389e6dd
1 /*
2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
5 *
6 * Licensed under the GPL-2 or later.
7 */
8
9 #include <linux/device.h>
10 #include <linux/export.h>
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
13 #include <linux/io.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/nand.h>
16 #include <linux/mtd/partitions.h>
17 #include <linux/mtd/plat-ram.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/flash.h>
21 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
22 #include <linux/usb/isp1362.h>
23 #endif
24 #include <linux/i2c.h>
25 #include <linux/i2c/adp5588.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ata_platform.h>
28 #include <linux/irq.h>
29 #include <linux/interrupt.h>
30 #include <linux/usb/sl811.h>
31 #include <linux/spi/mmc_spi.h>
32 #include <linux/leds.h>
33 #include <linux/input.h>
34 #include <asm/dma.h>
35 #include <asm/bfin5xx_spi.h>
36 #include <asm/reboot.h>
37 #include <asm/portmux.h>
38 #include <asm/dpmc.h>
39 #include <asm/bfin_sport.h>
40 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
41 #include <linux/regulator/fixed.h>
42 #endif
43 #include <linux/regulator/machine.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/regulator/userspace-consumer.h>
46
47 /*
48 * Name the Board for the /proc/cpuinfo
49 */
50 const char bfin_board_name[] = "ADI BF537-STAMP";
51
52 /*
53 * Driver needs to know address, irq and flag pin.
54 */
55
56 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
57 #include <linux/usb/isp1760.h>
58 static struct resource bfin_isp1760_resources[] = {
59 [0] = {
60 .start = 0x203C0000,
61 .end = 0x203C0000 + 0x000fffff,
62 .flags = IORESOURCE_MEM,
63 },
64 [1] = {
65 .start = IRQ_PF7,
66 .end = IRQ_PF7,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
68 },
69 };
70
71 static struct isp1760_platform_data isp1760_priv = {
72 .is_isp1761 = 0,
73 .bus_width_16 = 1,
74 .port1_otg = 0,
75 .analog_oc = 0,
76 .dack_polarity_high = 0,
77 .dreq_polarity_high = 0,
78 };
79
80 static struct platform_device bfin_isp1760_device = {
81 .name = "isp1760",
82 .id = 0,
83 .dev = {
84 .platform_data = &isp1760_priv,
85 },
86 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
87 .resource = bfin_isp1760_resources,
88 };
89 #endif
90
91 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
92 #include <linux/gpio_keys.h>
93
94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
95 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
96 {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
97 {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
98 {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
99 };
100
101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
102 .buttons = bfin_gpio_keys_table,
103 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
104 };
105
106 static struct platform_device bfin_device_gpiokeys = {
107 .name = "gpio-keys",
108 .dev = {
109 .platform_data = &bfin_gpio_keys_data,
110 },
111 };
112 #endif
113
114 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
115 static struct resource bfin_pcmcia_cf_resources[] = {
116 {
117 .start = 0x20310000, /* IO PORT */
118 .end = 0x20312000,
119 .flags = IORESOURCE_MEM,
120 }, {
121 .start = 0x20311000, /* Attribute Memory */
122 .end = 0x20311FFF,
123 .flags = IORESOURCE_MEM,
124 }, {
125 .start = IRQ_PF4,
126 .end = IRQ_PF4,
127 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
128 }, {
129 .start = 6, /* Card Detect PF6 */
130 .end = 6,
131 .flags = IORESOURCE_IRQ,
132 },
133 };
134
135 static struct platform_device bfin_pcmcia_cf_device = {
136 .name = "bfin_cf_pcmcia",
137 .id = -1,
138 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
139 .resource = bfin_pcmcia_cf_resources,
140 };
141 #endif
142
143 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
144 static struct platform_device rtc_device = {
145 .name = "rtc-bfin",
146 .id = -1,
147 };
148 #endif
149
150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
151 #include <linux/smc91x.h>
152
153 static struct smc91x_platdata smc91x_info = {
154 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
155 .leda = RPC_LED_100_10,
156 .ledb = RPC_LED_TX_RX,
157 };
158
159 static struct resource smc91x_resources[] = {
160 {
161 .name = "smc91x-regs",
162 .start = 0x20300300,
163 .end = 0x20300300 + 16,
164 .flags = IORESOURCE_MEM,
165 }, {
166
167 .start = IRQ_PF7,
168 .end = IRQ_PF7,
169 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
170 },
171 };
172 static struct platform_device smc91x_device = {
173 .name = "smc91x",
174 .id = 0,
175 .num_resources = ARRAY_SIZE(smc91x_resources),
176 .resource = smc91x_resources,
177 .dev = {
178 .platform_data = &smc91x_info,
179 },
180 };
181 #endif
182
183 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
184 static struct resource dm9000_resources[] = {
185 [0] = {
186 .start = 0x203FB800,
187 .end = 0x203FB800 + 1,
188 .flags = IORESOURCE_MEM,
189 },
190 [1] = {
191 .start = 0x203FB804,
192 .end = 0x203FB804 + 1,
193 .flags = IORESOURCE_MEM,
194 },
195 [2] = {
196 .start = IRQ_PF9,
197 .end = IRQ_PF9,
198 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
199 },
200 };
201
202 static struct platform_device dm9000_device = {
203 .name = "dm9000",
204 .id = -1,
205 .num_resources = ARRAY_SIZE(dm9000_resources),
206 .resource = dm9000_resources,
207 };
208 #endif
209
210 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
211 static struct resource sl811_hcd_resources[] = {
212 {
213 .start = 0x20340000,
214 .end = 0x20340000,
215 .flags = IORESOURCE_MEM,
216 }, {
217 .start = 0x20340004,
218 .end = 0x20340004,
219 .flags = IORESOURCE_MEM,
220 }, {
221 .start = IRQ_PF4,
222 .end = IRQ_PF4,
223 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
224 },
225 };
226
227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
228 void sl811_port_power(struct device *dev, int is_on)
229 {
230 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
231 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
232 }
233 #endif
234
235 static struct sl811_platform_data sl811_priv = {
236 .potpg = 10,
237 .power = 250, /* == 500mA */
238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
239 .port_power = &sl811_port_power,
240 #endif
241 };
242
243 static struct platform_device sl811_hcd_device = {
244 .name = "sl811-hcd",
245 .id = 0,
246 .dev = {
247 .platform_data = &sl811_priv,
248 },
249 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
250 .resource = sl811_hcd_resources,
251 };
252 #endif
253
254 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
255 static struct resource isp1362_hcd_resources[] = {
256 {
257 .start = 0x20360000,
258 .end = 0x20360000,
259 .flags = IORESOURCE_MEM,
260 }, {
261 .start = 0x20360004,
262 .end = 0x20360004,
263 .flags = IORESOURCE_MEM,
264 }, {
265 .start = IRQ_PF3,
266 .end = IRQ_PF3,
267 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
268 },
269 };
270
271 static struct isp1362_platform_data isp1362_priv = {
272 .sel15Kres = 1,
273 .clknotstop = 0,
274 .oc_enable = 0,
275 .int_act_high = 0,
276 .int_edge_triggered = 0,
277 .remote_wakeup_connected = 0,
278 .no_power_switching = 1,
279 .power_switching_mode = 0,
280 };
281
282 static struct platform_device isp1362_hcd_device = {
283 .name = "isp1362-hcd",
284 .id = 0,
285 .dev = {
286 .platform_data = &isp1362_priv,
287 },
288 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
289 .resource = isp1362_hcd_resources,
290 };
291 #endif
292
293 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
294 static unsigned short bfin_can_peripherals[] = {
295 P_CAN0_RX, P_CAN0_TX, 0
296 };
297
298 static struct resource bfin_can_resources[] = {
299 {
300 .start = 0xFFC02A00,
301 .end = 0xFFC02FFF,
302 .flags = IORESOURCE_MEM,
303 },
304 {
305 .start = IRQ_CAN_RX,
306 .end = IRQ_CAN_RX,
307 .flags = IORESOURCE_IRQ,
308 },
309 {
310 .start = IRQ_CAN_TX,
311 .end = IRQ_CAN_TX,
312 .flags = IORESOURCE_IRQ,
313 },
314 {
315 .start = IRQ_CAN_ERROR,
316 .end = IRQ_CAN_ERROR,
317 .flags = IORESOURCE_IRQ,
318 },
319 };
320
321 static struct platform_device bfin_can_device = {
322 .name = "bfin_can",
323 .num_resources = ARRAY_SIZE(bfin_can_resources),
324 .resource = bfin_can_resources,
325 .dev = {
326 .platform_data = &bfin_can_peripherals, /* Passed to driver */
327 },
328 };
329 #endif
330
331 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
332 #include <linux/bfin_mac.h>
333 static const unsigned short bfin_mac_peripherals[] = P_MII0;
334
335 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
336 {
337 .addr = 1,
338 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
339 },
340 };
341
342 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
343 .phydev_number = 1,
344 .phydev_data = bfin_phydev_data,
345 .phy_mode = PHY_INTERFACE_MODE_MII,
346 .mac_peripherals = bfin_mac_peripherals,
347 };
348
349 static struct platform_device bfin_mii_bus = {
350 .name = "bfin_mii_bus",
351 .dev = {
352 .platform_data = &bfin_mii_bus_data,
353 }
354 };
355
356 static struct platform_device bfin_mac_device = {
357 .name = "bfin_mac",
358 .dev = {
359 .platform_data = &bfin_mii_bus,
360 }
361 };
362 #endif
363
364 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
365 static struct resource net2272_bfin_resources[] = {
366 {
367 .start = 0x20300000,
368 .end = 0x20300000 + 0x100,
369 .flags = IORESOURCE_MEM,
370 }, {
371 .start = 1,
372 .flags = IORESOURCE_BUS,
373 }, {
374 .start = IRQ_PF7,
375 .end = IRQ_PF7,
376 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
377 },
378 };
379
380 static struct platform_device net2272_bfin_device = {
381 .name = "net2272",
382 .id = -1,
383 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
384 .resource = net2272_bfin_resources,
385 };
386 #endif
387
388 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
389 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
390
391 static struct mtd_partition bfin_plat_nand_partitions[] = {
392 {
393 .name = "linux kernel(nand)",
394 .size = 0x400000,
395 .offset = 0,
396 }, {
397 .name = "file system(nand)",
398 .size = MTDPART_SIZ_FULL,
399 .offset = MTDPART_OFS_APPEND,
400 },
401 };
402
403 #define BFIN_NAND_PLAT_CLE 2
404 #define BFIN_NAND_PLAT_ALE 1
405 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
406 {
407 struct nand_chip *this = mtd->priv;
408
409 if (cmd == NAND_CMD_NONE)
410 return;
411
412 if (ctrl & NAND_CLE)
413 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
414 else
415 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
416 }
417
418 #define BFIN_NAND_PLAT_READY GPIO_PF3
419 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
420 {
421 return gpio_get_value(BFIN_NAND_PLAT_READY);
422 }
423
424 static struct platform_nand_data bfin_plat_nand_data = {
425 .chip = {
426 .nr_chips = 1,
427 .chip_delay = 30,
428 .part_probe_types = part_probes,
429 .partitions = bfin_plat_nand_partitions,
430 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
431 },
432 .ctrl = {
433 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
434 .dev_ready = bfin_plat_nand_dev_ready,
435 },
436 };
437
438 #define MAX(x, y) (x > y ? x : y)
439 static struct resource bfin_plat_nand_resources = {
440 .start = 0x20212000,
441 .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
442 .flags = IORESOURCE_MEM,
443 };
444
445 static struct platform_device bfin_async_nand_device = {
446 .name = "gen_nand",
447 .id = -1,
448 .num_resources = 1,
449 .resource = &bfin_plat_nand_resources,
450 .dev = {
451 .platform_data = &bfin_plat_nand_data,
452 },
453 };
454
455 static void bfin_plat_nand_init(void)
456 {
457 gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
458 }
459 #else
460 static void bfin_plat_nand_init(void) {}
461 #endif
462
463 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
464 static struct mtd_partition stamp_partitions[] = {
465 {
466 .name = "bootloader(nor)",
467 .size = 0x40000,
468 .offset = 0,
469 }, {
470 .name = "linux kernel(nor)",
471 .size = 0x180000,
472 .offset = MTDPART_OFS_APPEND,
473 }, {
474 .name = "file system(nor)",
475 .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
476 .offset = MTDPART_OFS_APPEND,
477 }, {
478 .name = "MAC Address(nor)",
479 .size = MTDPART_SIZ_FULL,
480 .offset = 0x3F0000,
481 .mask_flags = MTD_WRITEABLE,
482 }
483 };
484
485 static struct physmap_flash_data stamp_flash_data = {
486 .width = 2,
487 .parts = stamp_partitions,
488 .nr_parts = ARRAY_SIZE(stamp_partitions),
489 #ifdef CONFIG_ROMKERNEL
490 .probe_type = "map_rom",
491 #endif
492 };
493
494 static struct resource stamp_flash_resource = {
495 .start = 0x20000000,
496 .end = 0x203fffff,
497 .flags = IORESOURCE_MEM,
498 };
499
500 static struct platform_device stamp_flash_device = {
501 .name = "physmap-flash",
502 .id = 0,
503 .dev = {
504 .platform_data = &stamp_flash_data,
505 },
506 .num_resources = 1,
507 .resource = &stamp_flash_resource,
508 };
509 #endif
510
511 #if defined(CONFIG_MTD_M25P80) \
512 || defined(CONFIG_MTD_M25P80_MODULE)
513 static struct mtd_partition bfin_spi_flash_partitions[] = {
514 {
515 .name = "bootloader(spi)",
516 .size = 0x00040000,
517 .offset = 0,
518 .mask_flags = MTD_CAP_ROM
519 }, {
520 .name = "linux kernel(spi)",
521 .size = 0x180000,
522 .offset = MTDPART_OFS_APPEND,
523 }, {
524 .name = "file system(spi)",
525 .size = MTDPART_SIZ_FULL,
526 .offset = MTDPART_OFS_APPEND,
527 }
528 };
529
530 static struct flash_platform_data bfin_spi_flash_data = {
531 .name = "m25p80",
532 .parts = bfin_spi_flash_partitions,
533 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
534 /* .type = "m25p64", */
535 };
536
537 /* SPI flash chip (m25p64) */
538 static struct bfin5xx_spi_chip spi_flash_chip_info = {
539 .enable_dma = 0, /* use dma transfer with this chip*/
540 };
541 #endif
542
543 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
544 #include <linux/input/ad714x.h>
545
546 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
547 {
548 .start_stage = 0,
549 .end_stage = 7,
550 .max_coord = 128,
551 },
552 };
553
554 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
555 {
556 .keycode = BTN_FORWARD,
557 .l_mask = 0,
558 .h_mask = 0x600,
559 },
560 {
561 .keycode = BTN_LEFT,
562 .l_mask = 0,
563 .h_mask = 0x500,
564 },
565 {
566 .keycode = BTN_MIDDLE,
567 .l_mask = 0,
568 .h_mask = 0x800,
569 },
570 {
571 .keycode = BTN_RIGHT,
572 .l_mask = 0x100,
573 .h_mask = 0x400,
574 },
575 {
576 .keycode = BTN_BACK,
577 .l_mask = 0x200,
578 .h_mask = 0x400,
579 },
580 };
581 static struct ad714x_platform_data ad7147_spi_platform_data = {
582 .slider_num = 1,
583 .button_num = 5,
584 .slider = ad7147_spi_slider_plat,
585 .button = ad7147_spi_button_plat,
586 .stage_cfg_reg = {
587 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
588 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
589 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
590 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
591 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
592 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
593 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
594 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
595 {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
596 {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
597 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
598 {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
599 },
600 .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
601 };
602 #endif
603
604 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
605 #include <linux/input/ad714x.h>
606 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
607 {
608 .keycode = BTN_1,
609 .l_mask = 0,
610 .h_mask = 0x1,
611 },
612 {
613 .keycode = BTN_2,
614 .l_mask = 0,
615 .h_mask = 0x2,
616 },
617 {
618 .keycode = BTN_3,
619 .l_mask = 0,
620 .h_mask = 0x4,
621 },
622 {
623 .keycode = BTN_4,
624 .l_mask = 0x0,
625 .h_mask = 0x8,
626 },
627 };
628 static struct ad714x_platform_data ad7142_i2c_platform_data = {
629 .button_num = 4,
630 .button = ad7142_i2c_button_plat,
631 .stage_cfg_reg = {
632 /* fixme: figure out right setting for all comoponent according
633 * to hardware feature of EVAL-AD7142EB board */
634 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
635 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
636 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
637 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
638 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
639 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
640 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
641 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
642 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
643 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
644 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
645 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
646 },
647 .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
648 };
649 #endif
650
651 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
652 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
653 .enable_dma = 0,
654 };
655 #endif
656
657 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
658 static unsigned short ad2s120x_platform_data[] = {
659 /* used as SAMPLE and RDVEL */
660 GPIO_PF5, GPIO_PF6, 0
661 };
662
663 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
664 .enable_dma = 0,
665 };
666 #endif
667
668 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
669 static unsigned short ad2s1210_platform_data[] = {
670 /* use as SAMPLE, A0, A1 */
671 GPIO_PF7, GPIO_PF8, GPIO_PF9,
672 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
673 /* the RES0 and RES1 pins */
674 GPIO_PF4, GPIO_PF5,
675 # endif
676 0,
677 };
678
679 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
680 .enable_dma = 0,
681 };
682 #endif
683
684 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
685 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
686 .enable_dma = 0,
687 };
688 #endif
689
690 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
691 static unsigned short ad7816_platform_data[] = {
692 GPIO_PF4, /* rdwr_pin */
693 GPIO_PF5, /* convert_pin */
694 GPIO_PF7, /* busy_pin */
695 0,
696 };
697
698 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
699 .enable_dma = 0,
700 };
701 #endif
702
703 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
704 static unsigned long adt7310_platform_data[3] = {
705 /* INT bound temperature alarm event. line 1 */
706 IRQ_PG4, IRQF_TRIGGER_LOW,
707 /* CT bound temperature alarm event irq_flags. line 0 */
708 IRQF_TRIGGER_LOW,
709 };
710
711 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
712 .enable_dma = 0,
713 };
714 #endif
715
716 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
717 static unsigned short ad7298_platform_data[] = {
718 GPIO_PF7, /* busy_pin */
719 0,
720 };
721 #endif
722
723 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
724 static unsigned long adt7316_spi_data[2] = {
725 IRQF_TRIGGER_LOW, /* interrupt flags */
726 GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
727 };
728
729 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
730 .enable_dma = 0,
731 };
732 #endif
733
734 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
735 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
736
737 static int bfin_mmc_spi_init(struct device *dev,
738 irqreturn_t (*detect_int)(int, void *), void *data)
739 {
740 return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
741 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
742 }
743
744 static void bfin_mmc_spi_exit(struct device *dev, void *data)
745 {
746 free_irq(MMC_SPI_CARD_DETECT_INT, data);
747 }
748
749 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
750 .init = bfin_mmc_spi_init,
751 .exit = bfin_mmc_spi_exit,
752 .detect_delay = 100, /* msecs */
753 };
754
755 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
756 .enable_dma = 0,
757 .pio_interrupt = 0,
758 };
759 #endif
760
761 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
762 #include <linux/spi/ad7877.h>
763 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
764 .model = 7877,
765 .vref_delay_usecs = 50, /* internal, no capacitor */
766 .x_plate_ohms = 419,
767 .y_plate_ohms = 486,
768 .pressure_max = 1000,
769 .pressure_min = 0,
770 .stopacq_polarity = 1,
771 .first_conversion_delay = 3,
772 .acquisition_time = 1,
773 .averaging = 1,
774 .pen_down_acc_interval = 1,
775 };
776 #endif
777
778 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
779 #include <linux/spi/ad7879.h>
780 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
781 .model = 7879, /* Model = AD7879 */
782 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
783 .pressure_max = 10000,
784 .pressure_min = 0,
785 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
786 .acquisition_time = 1, /* 4us acquisition time per sample */
787 .median = 2, /* do 8 measurements */
788 .averaging = 1, /* take the average of 4 middle samples */
789 .pen_down_acc_interval = 255, /* 9.4 ms */
790 .gpio_export = 1, /* Export GPIO to gpiolib */
791 .gpio_base = -1, /* Dynamic allocation */
792 };
793 #endif
794
795 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
796 #include <linux/input/adxl34x.h>
797 static const struct adxl34x_platform_data adxl34x_info = {
798 .x_axis_offset = 0,
799 .y_axis_offset = 0,
800 .z_axis_offset = 0,
801 .tap_threshold = 0x31,
802 .tap_duration = 0x10,
803 .tap_latency = 0x60,
804 .tap_window = 0xF0,
805 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
806 .act_axis_control = 0xFF,
807 .activity_threshold = 5,
808 .inactivity_threshold = 3,
809 .inactivity_time = 4,
810 .free_fall_threshold = 0x7,
811 .free_fall_time = 0x20,
812 .data_rate = 0x8,
813 .data_range = ADXL_FULL_RES,
814
815 .ev_type = EV_ABS,
816 .ev_code_x = ABS_X, /* EV_REL */
817 .ev_code_y = ABS_Y, /* EV_REL */
818 .ev_code_z = ABS_Z, /* EV_REL */
819
820 .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
821
822 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
823 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
824 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
825 .fifo_mode = ADXL_FIFO_STREAM,
826 .orientation_enable = ADXL_EN_ORIENTATION_3D,
827 .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
828 .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
829 /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
830 .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
831 };
832 #endif
833
834 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
835 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
836 .enable_dma = 1,
837 };
838 #endif
839
840 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
841 #include <linux/spi/adf702x.h>
842 #define TXREG 0x0160A470
843 static const u32 adf7021_regs[] = {
844 0x09608FA0,
845 0x00575011,
846 0x00A7F092,
847 0x2B141563,
848 0x81F29E94,
849 0x00003155,
850 0x050A4F66,
851 0x00000007,
852 0x00000008,
853 0x000231E9,
854 0x3296354A,
855 0x891A2B3B,
856 0x00000D9C,
857 0x0000000D,
858 0x0000000E,
859 0x0000000F,
860 };
861
862 static struct adf702x_platform_data adf7021_platform_data = {
863 .regs_base = (void *)SPORT1_TCR1,
864 .dma_ch_rx = CH_SPORT1_RX,
865 .dma_ch_tx = CH_SPORT1_TX,
866 .irq_sport_err = IRQ_SPORT1_ERROR,
867 .gpio_int_rfs = GPIO_PF8,
868 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
869 P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
870 .adf702x_model = MODEL_ADF7021,
871 .adf702x_regs = adf7021_regs,
872 .tx_reg = TXREG,
873 };
874 static inline void adf702x_mac_init(void)
875 {
876 random_ether_addr(adf7021_platform_data.mac_addr);
877 }
878 #else
879 static inline void adf702x_mac_init(void) {}
880 #endif
881
882 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
883 #include <linux/spi/ads7846.h>
884 static int ads7873_get_pendown_state(void)
885 {
886 return gpio_get_value(GPIO_PF6);
887 }
888
889 static struct ads7846_platform_data __initdata ad7873_pdata = {
890 .model = 7873, /* AD7873 */
891 .x_max = 0xfff,
892 .y_max = 0xfff,
893 .x_plate_ohms = 620,
894 .debounce_max = 1,
895 .debounce_rep = 0,
896 .debounce_tol = (~0),
897 .get_pendown_state = ads7873_get_pendown_state,
898 };
899 #endif
900
901 #if defined(CONFIG_MTD_DATAFLASH) \
902 || defined(CONFIG_MTD_DATAFLASH_MODULE)
903
904 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
905 {
906 .name = "bootloader(spi)",
907 .size = 0x00040000,
908 .offset = 0,
909 .mask_flags = MTD_CAP_ROM
910 }, {
911 .name = "linux kernel(spi)",
912 .size = 0x180000,
913 .offset = MTDPART_OFS_APPEND,
914 }, {
915 .name = "file system(spi)",
916 .size = MTDPART_SIZ_FULL,
917 .offset = MTDPART_OFS_APPEND,
918 }
919 };
920
921 static struct flash_platform_data bfin_spi_dataflash_data = {
922 .name = "SPI Dataflash",
923 .parts = bfin_spi_dataflash_partitions,
924 .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
925 };
926
927 /* DataFlash chip */
928 static struct bfin5xx_spi_chip data_flash_chip_info = {
929 .enable_dma = 0, /* use dma transfer with this chip*/
930 };
931 #endif
932
933 #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
934 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
935 .enable_dma = 0, /* use dma transfer with this chip*/
936 };
937 #endif
938
939 static struct spi_board_info bfin_spi_board_info[] __initdata = {
940 #if defined(CONFIG_MTD_M25P80) \
941 || defined(CONFIG_MTD_M25P80_MODULE)
942 {
943 /* the modalias must be the same as spi device driver name */
944 .modalias = "m25p80", /* Name of spi_driver for this device */
945 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
946 .bus_num = 0, /* Framework bus number */
947 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
948 .platform_data = &bfin_spi_flash_data,
949 .controller_data = &spi_flash_chip_info,
950 .mode = SPI_MODE_3,
951 },
952 #endif
953 #if defined(CONFIG_MTD_DATAFLASH) \
954 || defined(CONFIG_MTD_DATAFLASH_MODULE)
955 { /* DataFlash chip */
956 .modalias = "mtd_dataflash",
957 .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
958 .bus_num = 0, /* Framework bus number */
959 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
960 .platform_data = &bfin_spi_dataflash_data,
961 .controller_data = &data_flash_chip_info,
962 .mode = SPI_MODE_3,
963 },
964 #endif
965
966 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
967 || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
968 {
969 .modalias = "ad1836",
970 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
971 .bus_num = 0,
972 .chip_select = 4,
973 .platform_data = "ad1836", /* only includes chip name for the moment */
974 .mode = SPI_MODE_3,
975 },
976 #endif
977
978 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
979 {
980 .modalias = "ad193x",
981 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
982 .bus_num = 0,
983 .chip_select = 5,
984 .mode = SPI_MODE_3,
985 },
986 #endif
987
988 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
989 {
990 .modalias = "adav801",
991 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
992 .bus_num = 0,
993 .chip_select = 1,
994 .mode = SPI_MODE_3,
995 },
996 #endif
997
998 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
999 {
1000 .modalias = "ad714x_captouch",
1001 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1002 .irq = IRQ_PF4,
1003 .bus_num = 0,
1004 .chip_select = 5,
1005 .mode = SPI_MODE_3,
1006 .platform_data = &ad7147_spi_platform_data,
1007 },
1008 #endif
1009
1010 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1011 {
1012 .modalias = "ad2s90",
1013 .bus_num = 0,
1014 .chip_select = 3, /* change it for your board */
1015 .mode = SPI_MODE_3,
1016 .platform_data = NULL,
1017 .controller_data = &ad2s90_spi_chip_info,
1018 },
1019 #endif
1020
1021 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1022 {
1023 .modalias = "ad2s120x",
1024 .bus_num = 0,
1025 .chip_select = 4, /* CS, change it for your board */
1026 .platform_data = ad2s120x_platform_data,
1027 .controller_data = &ad2s120x_spi_chip_info,
1028 },
1029 #endif
1030
1031 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1032 {
1033 .modalias = "ad2s1210",
1034 .max_speed_hz = 8192000,
1035 .bus_num = 0,
1036 .chip_select = 4, /* CS, change it for your board */
1037 .platform_data = ad2s1210_platform_data,
1038 .controller_data = &ad2s1210_spi_chip_info,
1039 },
1040 #endif
1041
1042 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
1043 {
1044 .modalias = "ad7314",
1045 .max_speed_hz = 1000000,
1046 .bus_num = 0,
1047 .chip_select = 4, /* CS, change it for your board */
1048 .controller_data = &ad7314_spi_chip_info,
1049 .mode = SPI_MODE_1,
1050 },
1051 #endif
1052
1053 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
1054 {
1055 .modalias = "ad7818",
1056 .max_speed_hz = 1000000,
1057 .bus_num = 0,
1058 .chip_select = 4, /* CS, change it for your board */
1059 .platform_data = ad7816_platform_data,
1060 .controller_data = &ad7816_spi_chip_info,
1061 .mode = SPI_MODE_3,
1062 },
1063 #endif
1064
1065 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
1066 {
1067 .modalias = "adt7310",
1068 .max_speed_hz = 1000000,
1069 .irq = IRQ_PG5, /* CT alarm event. Line 0 */
1070 .bus_num = 0,
1071 .chip_select = 4, /* CS, change it for your board */
1072 .platform_data = adt7310_platform_data,
1073 .controller_data = &adt7310_spi_chip_info,
1074 .mode = SPI_MODE_3,
1075 },
1076 #endif
1077
1078 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
1079 {
1080 .modalias = "ad7298",
1081 .max_speed_hz = 1000000,
1082 .bus_num = 0,
1083 .chip_select = 4, /* CS, change it for your board */
1084 .platform_data = ad7298_platform_data,
1085 .mode = SPI_MODE_3,
1086 },
1087 #endif
1088
1089 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
1090 {
1091 .modalias = "adt7316",
1092 .max_speed_hz = 1000000,
1093 .irq = IRQ_PG5, /* interrupt line */
1094 .bus_num = 0,
1095 .chip_select = 4, /* CS, change it for your board */
1096 .platform_data = adt7316_spi_data,
1097 .controller_data = &adt7316_spi_chip_info,
1098 .mode = SPI_MODE_3,
1099 },
1100 #endif
1101
1102 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1103 {
1104 .modalias = "mmc_spi",
1105 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1106 .bus_num = 0,
1107 .chip_select = 4,
1108 .platform_data = &bfin_mmc_spi_pdata,
1109 .controller_data = &mmc_spi_chip_info,
1110 .mode = SPI_MODE_3,
1111 },
1112 #endif
1113 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1114 {
1115 .modalias = "ad7877",
1116 .platform_data = &bfin_ad7877_ts_info,
1117 .irq = IRQ_PF6,
1118 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
1119 .bus_num = 0,
1120 .chip_select = 1,
1121 },
1122 #endif
1123 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1124 {
1125 .modalias = "ad7879",
1126 .platform_data = &bfin_ad7879_ts_info,
1127 .irq = IRQ_PF7,
1128 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1129 .bus_num = 0,
1130 .chip_select = 1,
1131 .mode = SPI_CPHA | SPI_CPOL,
1132 },
1133 #endif
1134 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1135 {
1136 .modalias = "spidev",
1137 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1138 .bus_num = 0,
1139 .chip_select = 1,
1140 },
1141 #endif
1142 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1143 {
1144 .modalias = "bfin-lq035q1-spi",
1145 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1146 .bus_num = 0,
1147 .chip_select = 2,
1148 .mode = SPI_CPHA | SPI_CPOL,
1149 },
1150 #endif
1151 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1152 {
1153 .modalias = "enc28j60",
1154 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1155 .irq = IRQ_PF6,
1156 .bus_num = 0,
1157 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1158 .controller_data = &enc28j60_spi_chip_info,
1159 .mode = SPI_MODE_0,
1160 },
1161 #endif
1162 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1163 {
1164 .modalias = "adxl34x",
1165 .platform_data = &adxl34x_info,
1166 .irq = IRQ_PF6,
1167 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1168 .bus_num = 0,
1169 .chip_select = 2,
1170 .mode = SPI_MODE_3,
1171 },
1172 #endif
1173 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1174 {
1175 .modalias = "adf702x",
1176 .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
1177 .bus_num = 0,
1178 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1179 .platform_data = &adf7021_platform_data,
1180 .mode = SPI_MODE_0,
1181 },
1182 #endif
1183 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1184 {
1185 .modalias = "ads7846",
1186 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1187 .bus_num = 0,
1188 .irq = IRQ_PF6,
1189 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1190 .platform_data = &ad7873_pdata,
1191 .mode = SPI_MODE_0,
1192 },
1193 #endif
1194 #if defined(CONFIG_AD7476) \
1195 || defined(CONFIG_AD7476_MODULE)
1196 {
1197 .modalias = "ad7476", /* Name of spi_driver for this device */
1198 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
1199 .bus_num = 0, /* Framework bus number */
1200 .chip_select = 1, /* Framework chip select. */
1201 .platform_data = NULL, /* No spi_driver specific config */
1202 .controller_data = &spi_ad7476_chip_info,
1203 .mode = SPI_MODE_3,
1204 },
1205 #endif
1206 #if defined(CONFIG_ADE7753) \
1207 || defined(CONFIG_ADE7753_MODULE)
1208 {
1209 .modalias = "ade7753",
1210 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1211 .bus_num = 0,
1212 .chip_select = 1, /* CS, change it for your board */
1213 .platform_data = NULL, /* No spi_driver specific config */
1214 .mode = SPI_MODE_1,
1215 },
1216 #endif
1217 #if defined(CONFIG_ADE7754) \
1218 || defined(CONFIG_ADE7754_MODULE)
1219 {
1220 .modalias = "ade7754",
1221 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1222 .bus_num = 0,
1223 .chip_select = 1, /* CS, change it for your board */
1224 .platform_data = NULL, /* No spi_driver specific config */
1225 .mode = SPI_MODE_1,
1226 },
1227 #endif
1228 #if defined(CONFIG_ADE7758) \
1229 || defined(CONFIG_ADE7758_MODULE)
1230 {
1231 .modalias = "ade7758",
1232 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1233 .bus_num = 0,
1234 .chip_select = 1, /* CS, change it for your board */
1235 .platform_data = NULL, /* No spi_driver specific config */
1236 .mode = SPI_MODE_1,
1237 },
1238 #endif
1239 #if defined(CONFIG_ADE7759) \
1240 || defined(CONFIG_ADE7759_MODULE)
1241 {
1242 .modalias = "ade7759",
1243 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1244 .bus_num = 0,
1245 .chip_select = 1, /* CS, change it for your board */
1246 .platform_data = NULL, /* No spi_driver specific config */
1247 .mode = SPI_MODE_1,
1248 },
1249 #endif
1250 #if defined(CONFIG_ADE7854_SPI) \
1251 || defined(CONFIG_ADE7854_SPI_MODULE)
1252 {
1253 .modalias = "ade7854",
1254 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1255 .bus_num = 0,
1256 .chip_select = 1, /* CS, change it for your board */
1257 .platform_data = NULL, /* No spi_driver specific config */
1258 .mode = SPI_MODE_3,
1259 },
1260 #endif
1261 #if defined(CONFIG_ADIS16060) \
1262 || defined(CONFIG_ADIS16060_MODULE)
1263 {
1264 .modalias = "adis16060_r",
1265 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1266 .bus_num = 0,
1267 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1268 .platform_data = NULL, /* No spi_driver specific config */
1269 .mode = SPI_MODE_0,
1270 },
1271 {
1272 .modalias = "adis16060_w",
1273 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1274 .bus_num = 0,
1275 .chip_select = 2, /* CS for write, change it for your board */
1276 .platform_data = NULL, /* No spi_driver specific config */
1277 .mode = SPI_MODE_1,
1278 },
1279 #endif
1280 #if defined(CONFIG_ADIS16130) \
1281 || defined(CONFIG_ADIS16130_MODULE)
1282 {
1283 .modalias = "adis16130",
1284 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1285 .bus_num = 0,
1286 .chip_select = 1, /* CS for read, change it for your board */
1287 .platform_data = NULL, /* No spi_driver specific config */
1288 .mode = SPI_MODE_3,
1289 },
1290 #endif
1291 #if defined(CONFIG_ADIS16201) \
1292 || defined(CONFIG_ADIS16201_MODULE)
1293 {
1294 .modalias = "adis16201",
1295 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1296 .bus_num = 0,
1297 .chip_select = 5, /* CS, change it for your board */
1298 .platform_data = NULL, /* No spi_driver specific config */
1299 .mode = SPI_MODE_3,
1300 .irq = IRQ_PF4,
1301 },
1302 #endif
1303 #if defined(CONFIG_ADIS16203) \
1304 || defined(CONFIG_ADIS16203_MODULE)
1305 {
1306 .modalias = "adis16203",
1307 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1308 .bus_num = 0,
1309 .chip_select = 5, /* CS, change it for your board */
1310 .platform_data = NULL, /* No spi_driver specific config */
1311 .mode = SPI_MODE_3,
1312 .irq = IRQ_PF4,
1313 },
1314 #endif
1315 #if defined(CONFIG_ADIS16204) \
1316 || defined(CONFIG_ADIS16204_MODULE)
1317 {
1318 .modalias = "adis16204",
1319 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1320 .bus_num = 0,
1321 .chip_select = 5, /* CS, change it for your board */
1322 .platform_data = NULL, /* No spi_driver specific config */
1323 .mode = SPI_MODE_3,
1324 .irq = IRQ_PF4,
1325 },
1326 #endif
1327 #if defined(CONFIG_ADIS16209) \
1328 || defined(CONFIG_ADIS16209_MODULE)
1329 {
1330 .modalias = "adis16209",
1331 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1332 .bus_num = 0,
1333 .chip_select = 5, /* CS, change it for your board */
1334 .platform_data = NULL, /* No spi_driver specific config */
1335 .mode = SPI_MODE_3,
1336 .irq = IRQ_PF4,
1337 },
1338 #endif
1339 #if defined(CONFIG_ADIS16220) \
1340 || defined(CONFIG_ADIS16220_MODULE)
1341 {
1342 .modalias = "adis16220",
1343 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1344 .bus_num = 0,
1345 .chip_select = 5, /* CS, change it for your board */
1346 .platform_data = NULL, /* No spi_driver specific config */
1347 .mode = SPI_MODE_3,
1348 .irq = IRQ_PF4,
1349 },
1350 #endif
1351 #if defined(CONFIG_ADIS16240) \
1352 || defined(CONFIG_ADIS16240_MODULE)
1353 {
1354 .modalias = "adis16240",
1355 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1356 .bus_num = 0,
1357 .chip_select = 5, /* CS, change it for your board */
1358 .platform_data = NULL, /* No spi_driver specific config */
1359 .mode = SPI_MODE_3,
1360 .irq = IRQ_PF4,
1361 },
1362 #endif
1363 #if defined(CONFIG_ADIS16260) \
1364 || defined(CONFIG_ADIS16260_MODULE)
1365 {
1366 .modalias = "adis16260",
1367 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1368 .bus_num = 0,
1369 .chip_select = 5, /* CS, change it for your board */
1370 .platform_data = NULL, /* No spi_driver specific config */
1371 .mode = SPI_MODE_3,
1372 .irq = IRQ_PF4,
1373 },
1374 #endif
1375 #if defined(CONFIG_ADIS16261) \
1376 || defined(CONFIG_ADIS16261_MODULE)
1377 {
1378 .modalias = "adis16261",
1379 .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
1380 .bus_num = 0,
1381 .chip_select = 1, /* CS, change it for your board */
1382 .platform_data = NULL, /* No spi_driver specific config */
1383 .mode = SPI_MODE_3,
1384 },
1385 #endif
1386 #if defined(CONFIG_ADIS16300) \
1387 || defined(CONFIG_ADIS16300_MODULE)
1388 {
1389 .modalias = "adis16300",
1390 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1391 .bus_num = 0,
1392 .chip_select = 5, /* CS, change it for your board */
1393 .platform_data = NULL, /* No spi_driver specific config */
1394 .mode = SPI_MODE_3,
1395 .irq = IRQ_PF4,
1396 },
1397 #endif
1398 #if defined(CONFIG_ADIS16350) \
1399 || defined(CONFIG_ADIS16350_MODULE)
1400 {
1401 .modalias = "adis16364",
1402 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1403 .bus_num = 0,
1404 .chip_select = 5, /* CS, change it for your board */
1405 .platform_data = NULL, /* No spi_driver specific config */
1406 .mode = SPI_MODE_3,
1407 .irq = IRQ_PF4,
1408 },
1409 #endif
1410 #if defined(CONFIG_ADIS16400) \
1411 || defined(CONFIG_ADIS16400_MODULE)
1412 {
1413 .modalias = "adis16400",
1414 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1415 .bus_num = 0,
1416 .chip_select = 1, /* CS, change it for your board */
1417 .platform_data = NULL, /* No spi_driver specific config */
1418 .mode = SPI_MODE_3,
1419 },
1420 #endif
1421 };
1422
1423 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
1424 /* SPI controller data */
1425 static struct bfin5xx_spi_master bfin_spi0_info = {
1426 .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1427 .enable_dma = 1, /* master has the ability to do dma transfer */
1428 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1429 };
1430
1431 /* SPI (0) */
1432 static struct resource bfin_spi0_resource[] = {
1433 [0] = {
1434 .start = SPI0_REGBASE,
1435 .end = SPI0_REGBASE + 0xFF,
1436 .flags = IORESOURCE_MEM,
1437 },
1438 [1] = {
1439 .start = CH_SPI,
1440 .end = CH_SPI,
1441 .flags = IORESOURCE_DMA,
1442 },
1443 [2] = {
1444 .start = IRQ_SPI,
1445 .end = IRQ_SPI,
1446 .flags = IORESOURCE_IRQ,
1447 },
1448 };
1449
1450 static struct platform_device bfin_spi0_device = {
1451 .name = "bfin-spi",
1452 .id = 0, /* Bus number */
1453 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1454 .resource = bfin_spi0_resource,
1455 .dev = {
1456 .platform_data = &bfin_spi0_info, /* Passed to driver */
1457 },
1458 };
1459 #endif /* spi master and devices */
1460
1461 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1462
1463 /* SPORT SPI controller data */
1464 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1465 .num_chipselect = MAX_BLACKFIN_GPIOS,
1466 .enable_dma = 0, /* master don't support DMA */
1467 .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1468 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1469 };
1470
1471 static struct resource bfin_sport_spi0_resource[] = {
1472 [0] = {
1473 .start = SPORT0_TCR1,
1474 .end = SPORT0_TCR1 + 0xFF,
1475 .flags = IORESOURCE_MEM,
1476 },
1477 [1] = {
1478 .start = IRQ_SPORT0_ERROR,
1479 .end = IRQ_SPORT0_ERROR,
1480 .flags = IORESOURCE_IRQ,
1481 },
1482 };
1483
1484 static struct platform_device bfin_sport_spi0_device = {
1485 .name = "bfin-sport-spi",
1486 .id = 1, /* Bus number */
1487 .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1488 .resource = bfin_sport_spi0_resource,
1489 .dev = {
1490 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1491 },
1492 };
1493
1494 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1495 .num_chipselect = MAX_BLACKFIN_GPIOS,
1496 .enable_dma = 0, /* master don't support DMA */
1497 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1498 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1499 };
1500
1501 static struct resource bfin_sport_spi1_resource[] = {
1502 [0] = {
1503 .start = SPORT1_TCR1,
1504 .end = SPORT1_TCR1 + 0xFF,
1505 .flags = IORESOURCE_MEM,
1506 },
1507 [1] = {
1508 .start = IRQ_SPORT1_ERROR,
1509 .end = IRQ_SPORT1_ERROR,
1510 .flags = IORESOURCE_IRQ,
1511 },
1512 };
1513
1514 static struct platform_device bfin_sport_spi1_device = {
1515 .name = "bfin-sport-spi",
1516 .id = 2, /* Bus number */
1517 .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1518 .resource = bfin_sport_spi1_resource,
1519 .dev = {
1520 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1521 },
1522 };
1523
1524 #endif /* sport spi master and devices */
1525
1526 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1527 static struct platform_device bfin_fb_device = {
1528 .name = "bf537-lq035",
1529 };
1530 #endif
1531
1532 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1533 #include <asm/bfin-lq035q1.h>
1534
1535 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1536 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1537 .ppi_mode = USE_RGB565_16_BIT_PPI,
1538 .use_bl = 0, /* let something else control the LCD Blacklight */
1539 .gpio_bl = GPIO_PF7,
1540 };
1541
1542 static struct resource bfin_lq035q1_resources[] = {
1543 {
1544 .start = IRQ_PPI_ERROR,
1545 .end = IRQ_PPI_ERROR,
1546 .flags = IORESOURCE_IRQ,
1547 },
1548 };
1549
1550 static struct platform_device bfin_lq035q1_device = {
1551 .name = "bfin-lq035q1",
1552 .id = -1,
1553 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
1554 .resource = bfin_lq035q1_resources,
1555 .dev = {
1556 .platform_data = &bfin_lq035q1_data,
1557 },
1558 };
1559 #endif
1560
1561 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
1562 || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
1563 #include <linux/videodev2.h>
1564 #include <media/blackfin/bfin_capture.h>
1565 #include <media/blackfin/ppi.h>
1566
1567 static const unsigned short ppi_req[] = {
1568 P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
1569 P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
1570 P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
1571 0,
1572 };
1573
1574 static const struct ppi_info ppi_info = {
1575 .type = PPI_TYPE_PPI,
1576 .dma_ch = CH_PPI,
1577 .irq_err = IRQ_PPI_ERROR,
1578 .base = (void __iomem *)PPI_CONTROL,
1579 .pin_req = ppi_req,
1580 };
1581
1582 #if defined(CONFIG_VIDEO_VS6624) \
1583 || defined(CONFIG_VIDEO_VS6624_MODULE)
1584 static struct v4l2_input vs6624_inputs[] = {
1585 {
1586 .index = 0,
1587 .name = "Camera",
1588 .type = V4L2_INPUT_TYPE_CAMERA,
1589 .std = V4L2_STD_UNKNOWN,
1590 },
1591 };
1592
1593 static struct bcap_route vs6624_routes[] = {
1594 {
1595 .input = 0,
1596 .output = 0,
1597 },
1598 };
1599
1600 static const unsigned vs6624_ce_pin = GPIO_PF10;
1601
1602 static struct bfin_capture_config bfin_capture_data = {
1603 .card_name = "BF537",
1604 .inputs = vs6624_inputs,
1605 .num_inputs = ARRAY_SIZE(vs6624_inputs),
1606 .routes = vs6624_routes,
1607 .i2c_adapter_id = 0,
1608 .board_info = {
1609 .type = "vs6624",
1610 .addr = 0x10,
1611 .platform_data = (void *)&vs6624_ce_pin,
1612 },
1613 .ppi_info = &ppi_info,
1614 .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
1615 };
1616 #endif
1617
1618 static struct platform_device bfin_capture_device = {
1619 .name = "bfin_capture",
1620 .dev = {
1621 .platform_data = &bfin_capture_data,
1622 },
1623 };
1624 #endif
1625
1626 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1627 #ifdef CONFIG_SERIAL_BFIN_UART0
1628 static struct resource bfin_uart0_resources[] = {
1629 {
1630 .start = UART0_THR,
1631 .end = UART0_GCTL+2,
1632 .flags = IORESOURCE_MEM,
1633 },
1634 {
1635 .start = IRQ_UART0_TX,
1636 .end = IRQ_UART0_TX,
1637 .flags = IORESOURCE_IRQ,
1638 },
1639 {
1640 .start = IRQ_UART0_RX,
1641 .end = IRQ_UART0_RX,
1642 .flags = IORESOURCE_IRQ,
1643 },
1644 {
1645 .start = IRQ_UART0_ERROR,
1646 .end = IRQ_UART0_ERROR,
1647 .flags = IORESOURCE_IRQ,
1648 },
1649 {
1650 .start = CH_UART0_TX,
1651 .end = CH_UART0_TX,
1652 .flags = IORESOURCE_DMA,
1653 },
1654 {
1655 .start = CH_UART0_RX,
1656 .end = CH_UART0_RX,
1657 .flags = IORESOURCE_DMA,
1658 },
1659 #ifdef CONFIG_BFIN_UART0_CTSRTS
1660 { /* CTS pin */
1661 .start = GPIO_PG7,
1662 .end = GPIO_PG7,
1663 .flags = IORESOURCE_IO,
1664 },
1665 { /* RTS pin */
1666 .start = GPIO_PG6,
1667 .end = GPIO_PG6,
1668 .flags = IORESOURCE_IO,
1669 },
1670 #endif
1671 };
1672
1673 static unsigned short bfin_uart0_peripherals[] = {
1674 P_UART0_TX, P_UART0_RX, 0
1675 };
1676
1677 static struct platform_device bfin_uart0_device = {
1678 .name = "bfin-uart",
1679 .id = 0,
1680 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1681 .resource = bfin_uart0_resources,
1682 .dev = {
1683 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1684 },
1685 };
1686 #endif
1687 #ifdef CONFIG_SERIAL_BFIN_UART1
1688 static struct resource bfin_uart1_resources[] = {
1689 {
1690 .start = UART1_THR,
1691 .end = UART1_GCTL+2,
1692 .flags = IORESOURCE_MEM,
1693 },
1694 {
1695 .start = IRQ_UART1_TX,
1696 .end = IRQ_UART1_TX,
1697 .flags = IORESOURCE_IRQ,
1698 },
1699 {
1700 .start = IRQ_UART1_RX,
1701 .end = IRQ_UART1_RX,
1702 .flags = IORESOURCE_IRQ,
1703 },
1704 {
1705 .start = IRQ_UART1_ERROR,
1706 .end = IRQ_UART1_ERROR,
1707 .flags = IORESOURCE_IRQ,
1708 },
1709 {
1710 .start = CH_UART1_TX,
1711 .end = CH_UART1_TX,
1712 .flags = IORESOURCE_DMA,
1713 },
1714 {
1715 .start = CH_UART1_RX,
1716 .end = CH_UART1_RX,
1717 .flags = IORESOURCE_DMA,
1718 },
1719 };
1720
1721 static unsigned short bfin_uart1_peripherals[] = {
1722 P_UART1_TX, P_UART1_RX, 0
1723 };
1724
1725 static struct platform_device bfin_uart1_device = {
1726 .name = "bfin-uart",
1727 .id = 1,
1728 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1729 .resource = bfin_uart1_resources,
1730 .dev = {
1731 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1732 },
1733 };
1734 #endif
1735 #endif
1736
1737 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1738 #ifdef CONFIG_BFIN_SIR0
1739 static struct resource bfin_sir0_resources[] = {
1740 {
1741 .start = 0xFFC00400,
1742 .end = 0xFFC004FF,
1743 .flags = IORESOURCE_MEM,
1744 },
1745 {
1746 .start = IRQ_UART0_RX,
1747 .end = IRQ_UART0_RX+1,
1748 .flags = IORESOURCE_IRQ,
1749 },
1750 {
1751 .start = CH_UART0_RX,
1752 .end = CH_UART0_RX+1,
1753 .flags = IORESOURCE_DMA,
1754 },
1755 };
1756
1757 static struct platform_device bfin_sir0_device = {
1758 .name = "bfin_sir",
1759 .id = 0,
1760 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1761 .resource = bfin_sir0_resources,
1762 };
1763 #endif
1764 #ifdef CONFIG_BFIN_SIR1
1765 static struct resource bfin_sir1_resources[] = {
1766 {
1767 .start = 0xFFC02000,
1768 .end = 0xFFC020FF,
1769 .flags = IORESOURCE_MEM,
1770 },
1771 {
1772 .start = IRQ_UART1_RX,
1773 .end = IRQ_UART1_RX+1,
1774 .flags = IORESOURCE_IRQ,
1775 },
1776 {
1777 .start = CH_UART1_RX,
1778 .end = CH_UART1_RX+1,
1779 .flags = IORESOURCE_DMA,
1780 },
1781 };
1782
1783 static struct platform_device bfin_sir1_device = {
1784 .name = "bfin_sir",
1785 .id = 1,
1786 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1787 .resource = bfin_sir1_resources,
1788 };
1789 #endif
1790 #endif
1791
1792 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1793 static struct resource bfin_twi0_resource[] = {
1794 [0] = {
1795 .start = TWI0_REGBASE,
1796 .end = TWI0_REGBASE,
1797 .flags = IORESOURCE_MEM,
1798 },
1799 [1] = {
1800 .start = IRQ_TWI,
1801 .end = IRQ_TWI,
1802 .flags = IORESOURCE_IRQ,
1803 },
1804 };
1805
1806 static struct platform_device i2c_bfin_twi_device = {
1807 .name = "i2c-bfin-twi",
1808 .id = 0,
1809 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1810 .resource = bfin_twi0_resource,
1811 };
1812 #endif
1813
1814 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1815 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1816 [0] = KEY_GRAVE,
1817 [1] = KEY_1,
1818 [2] = KEY_2,
1819 [3] = KEY_3,
1820 [4] = KEY_4,
1821 [5] = KEY_5,
1822 [6] = KEY_6,
1823 [7] = KEY_7,
1824 [8] = KEY_8,
1825 [9] = KEY_9,
1826 [10] = KEY_0,
1827 [11] = KEY_MINUS,
1828 [12] = KEY_EQUAL,
1829 [13] = KEY_BACKSLASH,
1830 [15] = KEY_KP0,
1831 [16] = KEY_Q,
1832 [17] = KEY_W,
1833 [18] = KEY_E,
1834 [19] = KEY_R,
1835 [20] = KEY_T,
1836 [21] = KEY_Y,
1837 [22] = KEY_U,
1838 [23] = KEY_I,
1839 [24] = KEY_O,
1840 [25] = KEY_P,
1841 [26] = KEY_LEFTBRACE,
1842 [27] = KEY_RIGHTBRACE,
1843 [29] = KEY_KP1,
1844 [30] = KEY_KP2,
1845 [31] = KEY_KP3,
1846 [32] = KEY_A,
1847 [33] = KEY_S,
1848 [34] = KEY_D,
1849 [35] = KEY_F,
1850 [36] = KEY_G,
1851 [37] = KEY_H,
1852 [38] = KEY_J,
1853 [39] = KEY_K,
1854 [40] = KEY_L,
1855 [41] = KEY_SEMICOLON,
1856 [42] = KEY_APOSTROPHE,
1857 [43] = KEY_BACKSLASH,
1858 [45] = KEY_KP4,
1859 [46] = KEY_KP5,
1860 [47] = KEY_KP6,
1861 [48] = KEY_102ND,
1862 [49] = KEY_Z,
1863 [50] = KEY_X,
1864 [51] = KEY_C,
1865 [52] = KEY_V,
1866 [53] = KEY_B,
1867 [54] = KEY_N,
1868 [55] = KEY_M,
1869 [56] = KEY_COMMA,
1870 [57] = KEY_DOT,
1871 [58] = KEY_SLASH,
1872 [60] = KEY_KPDOT,
1873 [61] = KEY_KP7,
1874 [62] = KEY_KP8,
1875 [63] = KEY_KP9,
1876 [64] = KEY_SPACE,
1877 [65] = KEY_BACKSPACE,
1878 [66] = KEY_TAB,
1879 [67] = KEY_KPENTER,
1880 [68] = KEY_ENTER,
1881 [69] = KEY_ESC,
1882 [70] = KEY_DELETE,
1883 [74] = KEY_KPMINUS,
1884 [76] = KEY_UP,
1885 [77] = KEY_DOWN,
1886 [78] = KEY_RIGHT,
1887 [79] = KEY_LEFT,
1888 };
1889
1890 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1891 .rows = 8,
1892 .cols = 10,
1893 .keymap = adp5588_keymap,
1894 .keymapsize = ARRAY_SIZE(adp5588_keymap),
1895 .repeat = 0,
1896 };
1897 #endif
1898
1899 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1900 #include <linux/mfd/adp5520.h>
1901
1902 /*
1903 * ADP5520/5501 Backlight Data
1904 */
1905
1906 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1907 .fade_in = ADP5520_FADE_T_1200ms,
1908 .fade_out = ADP5520_FADE_T_1200ms,
1909 .fade_led_law = ADP5520_BL_LAW_LINEAR,
1910 .en_ambl_sens = 1,
1911 .abml_filt = ADP5520_BL_AMBL_FILT_640ms,
1912 .l1_daylight_max = ADP5520_BL_CUR_mA(15),
1913 .l1_daylight_dim = ADP5520_BL_CUR_mA(0),
1914 .l2_office_max = ADP5520_BL_CUR_mA(7),
1915 .l2_office_dim = ADP5520_BL_CUR_mA(0),
1916 .l3_dark_max = ADP5520_BL_CUR_mA(3),
1917 .l3_dark_dim = ADP5520_BL_CUR_mA(0),
1918 .l2_trip = ADP5520_L2_COMP_CURR_uA(700),
1919 .l2_hyst = ADP5520_L2_COMP_CURR_uA(50),
1920 .l3_trip = ADP5520_L3_COMP_CURR_uA(80),
1921 .l3_hyst = ADP5520_L3_COMP_CURR_uA(20),
1922 };
1923
1924 /*
1925 * ADP5520/5501 LEDs Data
1926 */
1927
1928 static struct led_info adp5520_leds[] = {
1929 {
1930 .name = "adp5520-led1",
1931 .default_trigger = "none",
1932 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1933 },
1934 #ifdef ADP5520_EN_ALL_LEDS
1935 {
1936 .name = "adp5520-led2",
1937 .default_trigger = "none",
1938 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1939 },
1940 {
1941 .name = "adp5520-led3",
1942 .default_trigger = "none",
1943 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1944 },
1945 #endif
1946 };
1947
1948 static struct adp5520_leds_platform_data adp5520_leds_data = {
1949 .num_leds = ARRAY_SIZE(adp5520_leds),
1950 .leds = adp5520_leds,
1951 .fade_in = ADP5520_FADE_T_600ms,
1952 .fade_out = ADP5520_FADE_T_600ms,
1953 .led_on_time = ADP5520_LED_ONT_600ms,
1954 };
1955
1956 /*
1957 * ADP5520 GPIO Data
1958 */
1959
1960 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1961 .gpio_start = 50,
1962 .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1963 .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1964 };
1965
1966 /*
1967 * ADP5520 Keypad Data
1968 */
1969
1970 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1971 [ADP5520_KEY(0, 0)] = KEY_GRAVE,
1972 [ADP5520_KEY(0, 1)] = KEY_1,
1973 [ADP5520_KEY(0, 2)] = KEY_2,
1974 [ADP5520_KEY(0, 3)] = KEY_3,
1975 [ADP5520_KEY(1, 0)] = KEY_4,
1976 [ADP5520_KEY(1, 1)] = KEY_5,
1977 [ADP5520_KEY(1, 2)] = KEY_6,
1978 [ADP5520_KEY(1, 3)] = KEY_7,
1979 [ADP5520_KEY(2, 0)] = KEY_8,
1980 [ADP5520_KEY(2, 1)] = KEY_9,
1981 [ADP5520_KEY(2, 2)] = KEY_0,
1982 [ADP5520_KEY(2, 3)] = KEY_MINUS,
1983 [ADP5520_KEY(3, 0)] = KEY_EQUAL,
1984 [ADP5520_KEY(3, 1)] = KEY_BACKSLASH,
1985 [ADP5520_KEY(3, 2)] = KEY_BACKSPACE,
1986 [ADP5520_KEY(3, 3)] = KEY_ENTER,
1987 };
1988
1989 static struct adp5520_keys_platform_data adp5520_keys_data = {
1990 .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1991 .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1992 .keymap = adp5520_keymap,
1993 .keymapsize = ARRAY_SIZE(adp5520_keymap),
1994 .repeat = 0,
1995 };
1996
1997 /*
1998 * ADP5520/5501 Multifunction Device Init Data
1999 */
2000
2001 static struct adp5520_platform_data adp5520_pdev_data = {
2002 .backlight = &adp5520_backlight_data,
2003 .leds = &adp5520_leds_data,
2004 .gpio = &adp5520_gpio_data,
2005 .keys = &adp5520_keys_data,
2006 };
2007
2008 #endif
2009
2010 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2011 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
2012 .gpio_start = 50,
2013 .pullup_dis_mask = 0,
2014 };
2015 #endif
2016
2017 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2018 #include <linux/i2c/adp8870.h>
2019 static struct led_info adp8870_leds[] = {
2020 {
2021 .name = "adp8870-led7",
2022 .default_trigger = "none",
2023 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
2024 },
2025 };
2026
2027
2028 static struct adp8870_backlight_platform_data adp8870_pdata = {
2029 .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
2030 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
2031 .pwm_assign = 0, /* 1 = Enables PWM mode */
2032
2033 .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */
2034 .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */
2035 .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
2036
2037 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
2038 .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */
2039
2040 .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2041 .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2042 .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2043 .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2044 .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2045 .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2046 .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2047 .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2048 .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2049 .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2050
2051 .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2052 .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2053 .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2054 .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2055 .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2056 .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2057 .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2058 .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2059
2060 .leds = adp8870_leds,
2061 .num_leds = ARRAY_SIZE(adp8870_leds),
2062 .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
2063 .led_fade_in = ADP8870_FADE_T_600ms,
2064 .led_fade_out = ADP8870_FADE_T_600ms,
2065 .led_on_time = ADP8870_LED_ONT_200ms,
2066 };
2067 #endif
2068
2069 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2070 #include <linux/i2c/adp8860.h>
2071 static struct led_info adp8860_leds[] = {
2072 {
2073 .name = "adp8860-led7",
2074 .default_trigger = "none",
2075 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2076 },
2077 };
2078
2079 static struct adp8860_backlight_platform_data adp8860_pdata = {
2080 .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2081 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2082
2083 .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */
2084 .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */
2085 .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
2086
2087 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
2088 .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */
2089
2090 .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2091 .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2092 .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2093 .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2094 .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2095 .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2096
2097 .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2098 .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2099 .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2100 .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2101
2102 .leds = adp8860_leds,
2103 .num_leds = ARRAY_SIZE(adp8860_leds),
2104 .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
2105 .led_fade_in = ADP8860_FADE_T_600ms,
2106 .led_fade_out = ADP8860_FADE_T_600ms,
2107 .led_on_time = ADP8860_LED_ONT_200ms,
2108 };
2109 #endif
2110
2111 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2112 static struct regulator_consumer_supply ad5398_consumer = {
2113 .supply = "current",
2114 };
2115
2116 static struct regulator_init_data ad5398_regulator_data = {
2117 .constraints = {
2118 .name = "current range",
2119 .max_uA = 120000,
2120 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2121 },
2122 .num_consumer_supplies = 1,
2123 .consumer_supplies = &ad5398_consumer,
2124 };
2125
2126 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2127 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2128 static struct platform_device ad5398_virt_consumer_device = {
2129 .name = "reg-virt-consumer",
2130 .id = 0,
2131 .dev = {
2132 .platform_data = "current", /* Passed to driver */
2133 },
2134 };
2135 #endif
2136 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2137 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2138 static struct regulator_bulk_data ad5398_bulk_data = {
2139 .supply = "current",
2140 };
2141
2142 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2143 .name = "ad5398",
2144 .num_supplies = 1,
2145 .supplies = &ad5398_bulk_data,
2146 };
2147
2148 static struct platform_device ad5398_userspace_consumer_device = {
2149 .name = "reg-userspace-consumer",
2150 .id = 0,
2151 .dev = {
2152 .platform_data = &ad5398_userspace_comsumer_data,
2153 },
2154 };
2155 #endif
2156 #endif
2157
2158 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2159 /* INT bound temperature alarm event. line 1 */
2160 static unsigned long adt7410_platform_data[2] = {
2161 IRQ_PG4, IRQF_TRIGGER_LOW,
2162 };
2163 #endif
2164
2165 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2166 /* INT bound temperature alarm event. line 1 */
2167 static unsigned long adt7316_i2c_data[2] = {
2168 IRQF_TRIGGER_LOW, /* interrupt flags */
2169 GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2170 };
2171 #endif
2172
2173 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2174 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
2175 {
2176 I2C_BOARD_INFO("ad1937", 0x04),
2177 },
2178 #endif
2179
2180 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
2181 {
2182 I2C_BOARD_INFO("adav803", 0x10),
2183 },
2184 #endif
2185
2186 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
2187 {
2188 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2189 .irq = IRQ_PG5,
2190 .platform_data = (void *)&ad7142_i2c_platform_data,
2191 },
2192 #endif
2193
2194 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
2195 {
2196 I2C_BOARD_INFO("ad7150", 0x48),
2197 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2198 },
2199 #endif
2200
2201 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
2202 {
2203 I2C_BOARD_INFO("ad7152", 0x48),
2204 },
2205 #endif
2206
2207 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
2208 {
2209 I2C_BOARD_INFO("ad774x", 0x48),
2210 },
2211 #endif
2212
2213 #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
2214 {
2215 I2C_BOARD_INFO("ade7854", 0x38),
2216 },
2217 #endif
2218
2219 #if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
2220 {
2221 I2C_BOARD_INFO("adt75", 0x9),
2222 .irq = IRQ_PG5,
2223 },
2224 #endif
2225
2226 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2227 {
2228 I2C_BOARD_INFO("adt7410", 0x48),
2229 /* CT critical temperature event. line 0 */
2230 .irq = IRQ_PG5,
2231 .platform_data = (void *)&adt7410_platform_data,
2232 },
2233 #endif
2234
2235 #if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
2236 {
2237 I2C_BOARD_INFO("ad7291", 0x20),
2238 .irq = IRQ_PG5,
2239 },
2240 #endif
2241
2242 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2243 {
2244 I2C_BOARD_INFO("adt7316", 0x48),
2245 .irq = IRQ_PG6,
2246 .platform_data = (void *)&adt7316_i2c_data,
2247 },
2248 #endif
2249
2250 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2251 {
2252 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2253 },
2254 #endif
2255 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
2256 {
2257 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2258 .irq = IRQ_PG6,
2259 },
2260 #endif
2261 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
2262 {
2263 I2C_BOARD_INFO("ad7879", 0x2F),
2264 .irq = IRQ_PG5,
2265 .platform_data = (void *)&bfin_ad7879_ts_info,
2266 },
2267 #endif
2268 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
2269 {
2270 I2C_BOARD_INFO("adp5588-keys", 0x34),
2271 .irq = IRQ_PG0,
2272 .platform_data = (void *)&adp5588_kpad_data,
2273 },
2274 #endif
2275 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
2276 {
2277 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2278 .irq = IRQ_PG0,
2279 .platform_data = (void *)&adp5520_pdev_data,
2280 },
2281 #endif
2282 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
2283 {
2284 I2C_BOARD_INFO("adxl34x", 0x53),
2285 .irq = IRQ_PG3,
2286 .platform_data = (void *)&adxl34x_info,
2287 },
2288 #endif
2289 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2290 {
2291 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2292 .platform_data = (void *)&adp5588_gpio_data,
2293 },
2294 #endif
2295 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
2296 {
2297 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2298 },
2299 #endif
2300 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2301 {
2302 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2303 },
2304 #endif
2305 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2306 {
2307 I2C_BOARD_INFO("adp8870", 0x2B),
2308 .platform_data = (void *)&adp8870_pdata,
2309 },
2310 #endif
2311 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
2312 {
2313 I2C_BOARD_INFO("adau1371", 0x1A),
2314 },
2315 #endif
2316 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
2317 {
2318 I2C_BOARD_INFO("adau1761", 0x38),
2319 },
2320 #endif
2321 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
2322 {
2323 I2C_BOARD_INFO("adau1361", 0x38),
2324 },
2325 #endif
2326 #if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
2327 {
2328 I2C_BOARD_INFO("adau1701", 0x34),
2329 },
2330 #endif
2331 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
2332 {
2333 I2C_BOARD_INFO("ad5258", 0x18),
2334 },
2335 #endif
2336 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
2337 {
2338 I2C_BOARD_INFO("ssm2602", 0x1b),
2339 },
2340 #endif
2341 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2342 {
2343 I2C_BOARD_INFO("ad5398", 0xC),
2344 .platform_data = (void *)&ad5398_regulator_data,
2345 },
2346 #endif
2347 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2348 {
2349 I2C_BOARD_INFO("adp8860", 0x2A),
2350 .platform_data = (void *)&adp8860_pdata,
2351 },
2352 #endif
2353 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
2354 {
2355 I2C_BOARD_INFO("adau1373", 0x1A),
2356 },
2357 #endif
2358 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2359 {
2360 I2C_BOARD_INFO("ad5252", 0x2e),
2361 },
2362 #endif
2363 };
2364
2365 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2366 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2367 static struct resource bfin_sport0_uart_resources[] = {
2368 {
2369 .start = SPORT0_TCR1,
2370 .end = SPORT0_MRCS3+4,
2371 .flags = IORESOURCE_MEM,
2372 },
2373 {
2374 .start = IRQ_SPORT0_RX,
2375 .end = IRQ_SPORT0_RX+1,
2376 .flags = IORESOURCE_IRQ,
2377 },
2378 {
2379 .start = IRQ_SPORT0_ERROR,
2380 .end = IRQ_SPORT0_ERROR,
2381 .flags = IORESOURCE_IRQ,
2382 },
2383 };
2384
2385 static unsigned short bfin_sport0_peripherals[] = {
2386 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2387 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
2388 };
2389
2390 static struct platform_device bfin_sport0_uart_device = {
2391 .name = "bfin-sport-uart",
2392 .id = 0,
2393 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2394 .resource = bfin_sport0_uart_resources,
2395 .dev = {
2396 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2397 },
2398 };
2399 #endif
2400 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2401 static struct resource bfin_sport1_uart_resources[] = {
2402 {
2403 .start = SPORT1_TCR1,
2404 .end = SPORT1_MRCS3+4,
2405 .flags = IORESOURCE_MEM,
2406 },
2407 {
2408 .start = IRQ_SPORT1_RX,
2409 .end = IRQ_SPORT1_RX+1,
2410 .flags = IORESOURCE_IRQ,
2411 },
2412 {
2413 .start = IRQ_SPORT1_ERROR,
2414 .end = IRQ_SPORT1_ERROR,
2415 .flags = IORESOURCE_IRQ,
2416 },
2417 };
2418
2419 static unsigned short bfin_sport1_peripherals[] = {
2420 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2421 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2422 };
2423
2424 static struct platform_device bfin_sport1_uart_device = {
2425 .name = "bfin-sport-uart",
2426 .id = 1,
2427 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2428 .resource = bfin_sport1_uart_resources,
2429 .dev = {
2430 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2431 },
2432 };
2433 #endif
2434 #endif
2435
2436 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2437 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2438 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2439
2440 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2441 #define PATA_INT IRQ_PF5
2442 static struct pata_platform_info bfin_pata_platform_data = {
2443 .ioport_shift = 1,
2444 .irq_flags = IRQF_TRIGGER_HIGH,
2445 };
2446
2447 static struct resource bfin_pata_resources[] = {
2448 {
2449 .start = 0x20314020,
2450 .end = 0x2031403F,
2451 .flags = IORESOURCE_MEM,
2452 },
2453 {
2454 .start = 0x2031401C,
2455 .end = 0x2031401F,
2456 .flags = IORESOURCE_MEM,
2457 },
2458 {
2459 .start = PATA_INT,
2460 .end = PATA_INT,
2461 .flags = IORESOURCE_IRQ,
2462 },
2463 };
2464 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2465 static struct pata_platform_info bfin_pata_platform_data = {
2466 .ioport_shift = 0,
2467 };
2468 /* CompactFlash Storage Card Memory Mapped Addressing
2469 * /REG = A11 = 1
2470 */
2471 static struct resource bfin_pata_resources[] = {
2472 {
2473 .start = 0x20211800,
2474 .end = 0x20211807,
2475 .flags = IORESOURCE_MEM,
2476 },
2477 {
2478 .start = 0x2021180E, /* Device Ctl */
2479 .end = 0x2021180E,
2480 .flags = IORESOURCE_MEM,
2481 },
2482 };
2483 #endif
2484
2485 static struct platform_device bfin_pata_device = {
2486 .name = "pata_platform",
2487 .id = -1,
2488 .num_resources = ARRAY_SIZE(bfin_pata_resources),
2489 .resource = bfin_pata_resources,
2490 .dev = {
2491 .platform_data = &bfin_pata_platform_data,
2492 }
2493 };
2494 #endif
2495
2496 static const unsigned int cclk_vlev_datasheet[] =
2497 {
2498 VRPAIR(VLEV_085, 250000000),
2499 VRPAIR(VLEV_090, 376000000),
2500 VRPAIR(VLEV_095, 426000000),
2501 VRPAIR(VLEV_100, 426000000),
2502 VRPAIR(VLEV_105, 476000000),
2503 VRPAIR(VLEV_110, 476000000),
2504 VRPAIR(VLEV_115, 476000000),
2505 VRPAIR(VLEV_120, 500000000),
2506 VRPAIR(VLEV_125, 533000000),
2507 VRPAIR(VLEV_130, 600000000),
2508 };
2509
2510 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2511 .tuple_tab = cclk_vlev_datasheet,
2512 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2513 .vr_settling_time = 25 /* us */,
2514 };
2515
2516 static struct platform_device bfin_dpmc = {
2517 .name = "bfin dpmc",
2518 .dev = {
2519 .platform_data = &bfin_dmpc_vreg_data,
2520 },
2521 };
2522
2523 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
2524 defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
2525 defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2526
2527 #define SPORT_REQ(x) \
2528 [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2529 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2530
2531 static const u16 bfin_snd_pin[][7] = {
2532 SPORT_REQ(0),
2533 SPORT_REQ(1),
2534 };
2535
2536 static struct bfin_snd_platform_data bfin_snd_data[] = {
2537 {
2538 .pin_req = &bfin_snd_pin[0][0],
2539 },
2540 {
2541 .pin_req = &bfin_snd_pin[1][0],
2542 },
2543 };
2544
2545 #define BFIN_SND_RES(x) \
2546 [x] = { \
2547 { \
2548 .start = SPORT##x##_TCR1, \
2549 .end = SPORT##x##_TCR1, \
2550 .flags = IORESOURCE_MEM \
2551 }, \
2552 { \
2553 .start = CH_SPORT##x##_RX, \
2554 .end = CH_SPORT##x##_RX, \
2555 .flags = IORESOURCE_DMA, \
2556 }, \
2557 { \
2558 .start = CH_SPORT##x##_TX, \
2559 .end = CH_SPORT##x##_TX, \
2560 .flags = IORESOURCE_DMA, \
2561 }, \
2562 { \
2563 .start = IRQ_SPORT##x##_ERROR, \
2564 .end = IRQ_SPORT##x##_ERROR, \
2565 .flags = IORESOURCE_IRQ, \
2566 } \
2567 }
2568
2569 static struct resource bfin_snd_resources[][4] = {
2570 BFIN_SND_RES(0),
2571 BFIN_SND_RES(1),
2572 };
2573 #endif
2574
2575 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2576 static struct platform_device bfin_i2s_pcm = {
2577 .name = "bfin-i2s-pcm-audio",
2578 .id = -1,
2579 };
2580 #endif
2581
2582 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2583 static struct platform_device bfin_tdm_pcm = {
2584 .name = "bfin-tdm-pcm-audio",
2585 .id = -1,
2586 };
2587 #endif
2588
2589 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2590 static struct platform_device bfin_ac97_pcm = {
2591 .name = "bfin-ac97-pcm-audio",
2592 .id = -1,
2593 };
2594 #endif
2595
2596 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2597 static struct platform_device bfin_ad73311_codec_device = {
2598 .name = "ad73311",
2599 .id = -1,
2600 };
2601 #endif
2602
2603 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2604 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2605 static struct platform_device bfin_eval_adav801_device = {
2606 .name = "bfin-eval-adav801",
2607 .id = -1,
2608 };
2609 #endif
2610
2611 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2612 static struct platform_device bfin_i2s = {
2613 .name = "bfin-i2s",
2614 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2615 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2616 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2617 .dev = {
2618 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2619 },
2620 };
2621 #endif
2622
2623 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2624 static struct platform_device bfin_tdm = {
2625 .name = "bfin-tdm",
2626 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2627 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2628 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2629 .dev = {
2630 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2631 },
2632 };
2633 #endif
2634
2635 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2636 static struct platform_device bfin_ac97 = {
2637 .name = "bfin-ac97",
2638 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2639 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2640 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2641 .dev = {
2642 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2643 },
2644 };
2645 #endif
2646
2647 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2648 #define REGULATOR_ADP122 "adp122"
2649 #define REGULATOR_ADP122_UV 2500000
2650
2651 static struct regulator_consumer_supply adp122_consumers = {
2652 .supply = REGULATOR_ADP122,
2653 };
2654
2655 static struct regulator_init_data adp_switch_regulator_data = {
2656 .constraints = {
2657 .name = REGULATOR_ADP122,
2658 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2659 .min_uV = REGULATOR_ADP122_UV,
2660 .max_uV = REGULATOR_ADP122_UV,
2661 .min_uA = 0,
2662 .max_uA = 300000,
2663 },
2664 .num_consumer_supplies = 1, /* only 1 */
2665 .consumer_supplies = &adp122_consumers,
2666 };
2667
2668 static struct fixed_voltage_config adp_switch_pdata = {
2669 .supply_name = REGULATOR_ADP122,
2670 .microvolts = REGULATOR_ADP122_UV,
2671 .gpio = GPIO_PF2,
2672 .enable_high = 1,
2673 .enabled_at_boot = 0,
2674 .init_data = &adp_switch_regulator_data,
2675 };
2676
2677 static struct platform_device adp_switch_device = {
2678 .name = "reg-fixed-voltage",
2679 .id = 0,
2680 .dev = {
2681 .platform_data = &adp_switch_pdata,
2682 },
2683 };
2684
2685 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2686 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2687 static struct regulator_bulk_data adp122_bulk_data = {
2688 .supply = REGULATOR_ADP122,
2689 };
2690
2691 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2692 .name = REGULATOR_ADP122,
2693 .num_supplies = 1,
2694 .supplies = &adp122_bulk_data,
2695 };
2696
2697 static struct platform_device adp122_userspace_consumer_device = {
2698 .name = "reg-userspace-consumer",
2699 .id = 0,
2700 .dev = {
2701 .platform_data = &adp122_userspace_comsumer_data,
2702 },
2703 };
2704 #endif
2705 #endif
2706
2707 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2708 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2709
2710 static struct resource iio_gpio_trigger_resources[] = {
2711 [0] = {
2712 .start = IRQ_PF5,
2713 .end = IRQ_PF5,
2714 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2715 },
2716 };
2717
2718 static struct platform_device iio_gpio_trigger = {
2719 .name = "iio_gpio_trigger",
2720 .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2721 .resource = iio_gpio_trigger_resources,
2722 };
2723 #endif
2724
2725 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2726 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2727 static struct platform_device bf5xx_adau1373_device = {
2728 .name = "bfin-eval-adau1373",
2729 };
2730 #endif
2731
2732 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2733 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2734 static struct platform_device bf5xx_adau1701_device = {
2735 .name = "bfin-eval-adau1701",
2736 };
2737 #endif
2738
2739 static struct platform_device *stamp_devices[] __initdata = {
2740
2741 &bfin_dpmc,
2742
2743 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2744 &bfin_pcmcia_cf_device,
2745 #endif
2746
2747 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2748 &rtc_device,
2749 #endif
2750
2751 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2752 &sl811_hcd_device,
2753 #endif
2754
2755 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2756 &isp1362_hcd_device,
2757 #endif
2758
2759 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2760 &bfin_isp1760_device,
2761 #endif
2762
2763 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2764 &smc91x_device,
2765 #endif
2766
2767 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2768 &dm9000_device,
2769 #endif
2770
2771 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2772 &bfin_can_device,
2773 #endif
2774
2775 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2776 &bfin_mii_bus,
2777 &bfin_mac_device,
2778 #endif
2779
2780 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2781 &net2272_bfin_device,
2782 #endif
2783
2784 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
2785 &bfin_spi0_device,
2786 #endif
2787
2788 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2789 &bfin_sport_spi0_device,
2790 &bfin_sport_spi1_device,
2791 #endif
2792
2793 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2794 &bfin_fb_device,
2795 #endif
2796
2797 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2798 &bfin_lq035q1_device,
2799 #endif
2800
2801 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
2802 || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
2803 &bfin_capture_device,
2804 #endif
2805
2806 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2807 #ifdef CONFIG_SERIAL_BFIN_UART0
2808 &bfin_uart0_device,
2809 #endif
2810 #ifdef CONFIG_SERIAL_BFIN_UART1
2811 &bfin_uart1_device,
2812 #endif
2813 #endif
2814
2815 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2816 #ifdef CONFIG_BFIN_SIR0
2817 &bfin_sir0_device,
2818 #endif
2819 #ifdef CONFIG_BFIN_SIR1
2820 &bfin_sir1_device,
2821 #endif
2822 #endif
2823
2824 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2825 &i2c_bfin_twi_device,
2826 #endif
2827
2828 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2829 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2830 &bfin_sport0_uart_device,
2831 #endif
2832 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2833 &bfin_sport1_uart_device,
2834 #endif
2835 #endif
2836
2837 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2838 &bfin_pata_device,
2839 #endif
2840
2841 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2842 &bfin_device_gpiokeys,
2843 #endif
2844
2845 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2846 &bfin_async_nand_device,
2847 #endif
2848
2849 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2850 &stamp_flash_device,
2851 #endif
2852
2853 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2854 &bfin_i2s_pcm,
2855 #endif
2856
2857 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2858 &bfin_tdm_pcm,
2859 #endif
2860
2861 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2862 &bfin_ac97_pcm,
2863 #endif
2864
2865 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2866 &bfin_ad73311_codec_device,
2867 #endif
2868
2869 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2870 &bfin_i2s,
2871 #endif
2872
2873 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2874 &bfin_tdm,
2875 #endif
2876
2877 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2878 &bfin_ac97,
2879 #endif
2880
2881 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2882 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2883 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2884 &ad5398_virt_consumer_device,
2885 #endif
2886 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2887 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2888 &ad5398_userspace_consumer_device,
2889 #endif
2890 #endif
2891
2892 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2893 &adp_switch_device,
2894 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2895 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2896 &adp122_userspace_consumer_device,
2897 #endif
2898 #endif
2899
2900 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2901 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2902 &iio_gpio_trigger,
2903 #endif
2904
2905 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2906 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2907 &bf5xx_adau1373_device,
2908 #endif
2909
2910 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2911 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2912 &bf5xx_adau1701_device,
2913 #endif
2914
2915 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2916 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2917 &bfin_eval_adav801_device,
2918 #endif
2919 };
2920
2921 static int __init net2272_init(void)
2922 {
2923 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2924 int ret;
2925
2926 ret = gpio_request(GPIO_PF6, "net2272");
2927 if (ret)
2928 return ret;
2929
2930 /* Reset the USB chip */
2931 gpio_direction_output(GPIO_PF6, 0);
2932 mdelay(2);
2933 gpio_set_value(GPIO_PF6, 1);
2934 #endif
2935
2936 return 0;
2937 }
2938
2939 static int __init stamp_init(void)
2940 {
2941 printk(KERN_INFO "%s(): registering device resources\n", __func__);
2942 bfin_plat_nand_init();
2943 adf702x_mac_init();
2944 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2945 i2c_register_board_info(0, bfin_i2c_board_info,
2946 ARRAY_SIZE(bfin_i2c_board_info));
2947 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2948
2949 if (net2272_init())
2950 pr_warning("unable to configure net2272; it probably won't work\n");
2951
2952 return 0;
2953 }
2954
2955 arch_initcall(stamp_init);
2956
2957
2958 static struct platform_device *stamp_early_devices[] __initdata = {
2959 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2960 #ifdef CONFIG_SERIAL_BFIN_UART0
2961 &bfin_uart0_device,
2962 #endif
2963 #ifdef CONFIG_SERIAL_BFIN_UART1
2964 &bfin_uart1_device,
2965 #endif
2966 #endif
2967
2968 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2969 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2970 &bfin_sport0_uart_device,
2971 #endif
2972 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2973 &bfin_sport1_uart_device,
2974 #endif
2975 #endif
2976 };
2977
2978 void __init native_machine_early_platform_add_devices(void)
2979 {
2980 printk(KERN_INFO "register early platform devices\n");
2981 early_platform_add_devices(stamp_early_devices,
2982 ARRAY_SIZE(stamp_early_devices));
2983 }
2984
2985 void native_machine_restart(char *cmd)
2986 {
2987 /* workaround reboot hang when booting from SPI */
2988 if ((bfin_read_SYSCR() & 0x7) == 0x3)
2989 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
2990 }
2991
2992 /*
2993 * Currently the MAC address is saved in Flash by U-Boot
2994 */
2995 #define FLASH_MAC 0x203f0000
2996 void bfin_get_ether_addr(char *addr)
2997 {
2998 *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
2999 *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
3000 }
3001 EXPORT_SYMBOL(bfin_get_ether_addr);