spi-topcliff-pch: Fix issue for transmitting over 4KByte
[zen-stable.git] / arch / mips / pnx833x / common / platform.c
blob87167dcc79fa24bf694a9e2d7bc69890a4eab2ef
1 /*
2 * platform.c: platform support for PNX833X.
4 * Copyright 2008 NXP Semiconductors
5 * Chris Steel <chris.steel@nxp.com>
6 * Daniel Laird <daniel.j.laird@nxp.com>
8 * Based on software written by:
9 * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 #include <linux/device.h>
26 #include <linux/dma-mapping.h>
27 #include <linux/platform_device.h>
28 #include <linux/kernel.h>
29 #include <linux/init.h>
30 #include <linux/resource.h>
31 #include <linux/serial.h>
32 #include <linux/serial_pnx8xxx.h>
33 #include <linux/mtd/nand.h>
34 #include <linux/mtd/partitions.h>
36 #ifdef CONFIG_I2C_PNX0105
37 /* Until i2c driver available in kernel.*/
38 #include <linux/i2c-pnx0105.h>
39 #endif
41 #include <irq.h>
42 #include <irq-mapping.h>
43 #include <pnx833x.h>
45 static u64 uart_dmamask = DMA_BIT_MASK(32);
47 static struct resource pnx833x_uart_resources[] = {
48 [0] = {
49 .start = PNX833X_UART0_PORTS_START,
50 .end = PNX833X_UART0_PORTS_END,
51 .flags = IORESOURCE_MEM,
53 [1] = {
54 .start = PNX833X_PIC_UART0_INT,
55 .end = PNX833X_PIC_UART0_INT,
56 .flags = IORESOURCE_IRQ,
58 [2] = {
59 .start = PNX833X_UART1_PORTS_START,
60 .end = PNX833X_UART1_PORTS_END,
61 .flags = IORESOURCE_MEM,
63 [3] = {
64 .start = PNX833X_PIC_UART1_INT,
65 .end = PNX833X_PIC_UART1_INT,
66 .flags = IORESOURCE_IRQ,
70 struct pnx8xxx_port pnx8xxx_ports[] = {
71 [0] = {
72 .port = {
73 .type = PORT_PNX8XXX,
74 .iotype = UPIO_MEM,
75 .membase = (void __iomem *)PNX833X_UART0_PORTS_START,
76 .mapbase = PNX833X_UART0_PORTS_START,
77 .irq = PNX833X_PIC_UART0_INT,
78 .uartclk = 3692300,
79 .fifosize = 16,
80 .flags = UPF_BOOT_AUTOCONF,
81 .line = 0,
84 [1] = {
85 .port = {
86 .type = PORT_PNX8XXX,
87 .iotype = UPIO_MEM,
88 .membase = (void __iomem *)PNX833X_UART1_PORTS_START,
89 .mapbase = PNX833X_UART1_PORTS_START,
90 .irq = PNX833X_PIC_UART1_INT,
91 .uartclk = 3692300,
92 .fifosize = 16,
93 .flags = UPF_BOOT_AUTOCONF,
94 .line = 1,
99 static struct platform_device pnx833x_uart_device = {
100 .name = "pnx8xxx-uart",
101 .id = -1,
102 .dev = {
103 .dma_mask = &uart_dmamask,
104 .coherent_dma_mask = DMA_BIT_MASK(32),
105 .platform_data = pnx8xxx_ports,
107 .num_resources = ARRAY_SIZE(pnx833x_uart_resources),
108 .resource = pnx833x_uart_resources,
111 static u64 ehci_dmamask = DMA_BIT_MASK(32);
113 static struct resource pnx833x_usb_ehci_resources[] = {
114 [0] = {
115 .start = PNX833X_USB_PORTS_START,
116 .end = PNX833X_USB_PORTS_END,
117 .flags = IORESOURCE_MEM,
119 [1] = {
120 .start = PNX833X_PIC_USB_INT,
121 .end = PNX833X_PIC_USB_INT,
122 .flags = IORESOURCE_IRQ,
126 static struct platform_device pnx833x_usb_ehci_device = {
127 .name = "pnx833x-ehci",
128 .id = -1,
129 .dev = {
130 .dma_mask = &ehci_dmamask,
131 .coherent_dma_mask = DMA_BIT_MASK(32),
133 .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources),
134 .resource = pnx833x_usb_ehci_resources,
137 #ifdef CONFIG_I2C_PNX0105
138 static struct resource pnx833x_i2c0_resources[] = {
140 .start = PNX833X_I2C0_PORTS_START,
141 .end = PNX833X_I2C0_PORTS_END,
142 .flags = IORESOURCE_MEM,
145 .start = PNX833X_PIC_I2C0_INT,
146 .end = PNX833X_PIC_I2C0_INT,
147 .flags = IORESOURCE_IRQ,
151 static struct resource pnx833x_i2c1_resources[] = {
153 .start = PNX833X_I2C1_PORTS_START,
154 .end = PNX833X_I2C1_PORTS_END,
155 .flags = IORESOURCE_MEM,
158 .start = PNX833X_PIC_I2C1_INT,
159 .end = PNX833X_PIC_I2C1_INT,
160 .flags = IORESOURCE_IRQ,
164 static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = {
166 .base = PNX833X_I2C0_PORTS_START,
167 .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */
168 .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Preferred HDCP) */
169 .bus_addr = 0, /* no slave support */
172 .base = PNX833X_I2C1_PORTS_START,
173 .irq = -1, /* on high freq, polling is faster */
174 /*.irq = PNX833X_PIC_I2C1_INT,*/
175 .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */
176 .bus_addr = 0, /* no slave support */
180 static struct platform_device pnx833x_i2c0_device = {
181 .name = "i2c-pnx0105",
182 .id = 0,
183 .dev = {
184 .platform_data = &pnx833x_i2c_dev[0],
186 .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources),
187 .resource = pnx833x_i2c0_resources,
190 static struct platform_device pnx833x_i2c1_device = {
191 .name = "i2c-pnx0105",
192 .id = 1,
193 .dev = {
194 .platform_data = &pnx833x_i2c_dev[1],
196 .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources),
197 .resource = pnx833x_i2c1_resources,
199 #endif
201 static u64 ethernet_dmamask = DMA_BIT_MASK(32);
203 static struct resource pnx833x_ethernet_resources[] = {
204 [0] = {
205 .start = PNX8335_IP3902_PORTS_START,
206 .end = PNX8335_IP3902_PORTS_END,
207 .flags = IORESOURCE_MEM,
209 [1] = {
210 .start = PNX8335_PIC_ETHERNET_INT,
211 .end = PNX8335_PIC_ETHERNET_INT,
212 .flags = IORESOURCE_IRQ,
216 static struct platform_device pnx833x_ethernet_device = {
217 .name = "ip3902-eth",
218 .id = -1,
219 .dev = {
220 .dma_mask = &ethernet_dmamask,
221 .coherent_dma_mask = DMA_BIT_MASK(32),
223 .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
224 .resource = pnx833x_ethernet_resources,
227 static struct resource pnx833x_sata_resources[] = {
228 [0] = {
229 .start = PNX8335_SATA_PORTS_START,
230 .end = PNX8335_SATA_PORTS_END,
231 .flags = IORESOURCE_MEM,
233 [1] = {
234 .start = PNX8335_PIC_SATA_INT,
235 .end = PNX8335_PIC_SATA_INT,
236 .flags = IORESOURCE_IRQ,
240 static struct platform_device pnx833x_sata_device = {
241 .name = "pnx833x-sata",
242 .id = -1,
243 .num_resources = ARRAY_SIZE(pnx833x_sata_resources),
244 .resource = pnx833x_sata_resources,
247 static const char *part_probes[] = {
248 "cmdlinepart",
249 NULL
252 static void
253 pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
255 struct nand_chip *this = mtd->priv;
256 unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
258 if (cmd == NAND_CMD_NONE)
259 return;
261 if (ctrl & NAND_CLE)
262 writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
263 else
264 writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
267 static struct platform_nand_data pnx833x_flash_nand_data = {
268 .chip = {
269 .nr_chips = 1,
270 .chip_delay = 25,
271 .part_probe_types = part_probes,
273 .ctrl = {
274 .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl
279 * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
280 * 12 bytes more seems to be the standard that allows for NAND access.
282 static struct resource pnx833x_flash_nand_resource = {
283 .start = PNX8335_NAND_BASE,
284 .end = PNX8335_NAND_BASE + 12,
285 .flags = IORESOURCE_MEM,
288 static struct platform_device pnx833x_flash_nand = {
289 .name = "gen_nand",
290 .id = -1,
291 .num_resources = 1,
292 .resource = &pnx833x_flash_nand_resource,
293 .dev = {
294 .platform_data = &pnx833x_flash_nand_data,
298 static struct platform_device *pnx833x_platform_devices[] __initdata = {
299 &pnx833x_uart_device,
300 &pnx833x_usb_ehci_device,
301 #ifdef CONFIG_I2C_PNX0105
302 &pnx833x_i2c0_device,
303 &pnx833x_i2c1_device,
304 #endif
305 &pnx833x_ethernet_device,
306 &pnx833x_sata_device,
307 &pnx833x_flash_nand,
310 static int __init pnx833x_platform_init(void)
312 int res;
314 res = platform_add_devices(pnx833x_platform_devices,
315 ARRAY_SIZE(pnx833x_platform_devices));
317 return res;
320 arch_initcall(pnx833x_platform_init);