spi-topcliff-pch: Fix issue for transmitting over 4KByte

[zen-stable.git] / fs / xfs / xfs_dquot_item.c

/*
 * Copyright (c) 2000-2003 Silicon Graphics, Inc.
 * All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it would be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write the Free Software Foundation,
 * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_bit.h"
#include "xfs_log.h"
#include "xfs_inum.h"
#include "xfs_trans.h"
#include "xfs_sb.h"
#include "xfs_ag.h"
#include "xfs_alloc.h"
#include "xfs_quota.h"
#include "xfs_mount.h"
#include "xfs_bmap_btree.h"
#include "xfs_inode.h"
#include "xfs_bmap.h"
#include "xfs_rtalloc.h"
#include "xfs_error.h"
#include "xfs_itable.h"
#include "xfs_attr.h"
#include "xfs_buf_item.h"
#include "xfs_trans_priv.h"
#include "xfs_qm.h"

static inline struct xfs_dq_logitem *DQUOT_ITEM(struct xfs_log_item *lip)
{
        return container_of(lip, struct xfs_dq_logitem, qli_item);
}

/*
 * returns the number of iovecs needed to log the given dquot item.
 */
STATIC uint
xfs_qm_dquot_logitem_size(
        struct xfs_log_item     *lip)
{
        /*
         * we need only two iovecs, one for the format, one for the real thing
         */
        return 2;
}

/*
 * fills in the vector of log iovecs for the given dquot log item.
 */
STATIC void
xfs_qm_dquot_logitem_format(
        struct xfs_log_item     *lip,
        struct xfs_log_iovec    *logvec)
{
        struct xfs_dq_logitem   *qlip = DQUOT_ITEM(lip);

        logvec->i_addr = &qlip->qli_format;
        logvec->i_len  = sizeof(xfs_dq_logformat_t);
        logvec->i_type = XLOG_REG_TYPE_QFORMAT;
        logvec++;
        logvec->i_addr = &qlip->qli_dquot->q_core;
        logvec->i_len  = sizeof(xfs_disk_dquot_t);
        logvec->i_type = XLOG_REG_TYPE_DQUOT;

        qlip->qli_format.qlf_size = 2;

}

/*
 * Increment the pin count of the given dquot.
 */
STATIC void
xfs_qm_dquot_logitem_pin(
        struct xfs_log_item     *lip)
{
        struct xfs_dquot        *dqp = DQUOT_ITEM(lip)->qli_dquot;

        ASSERT(XFS_DQ_IS_LOCKED(dqp));
        atomic_inc(&dqp->q_pincount);
}

/*
 * Decrement the pin count of the given dquot, and wake up
 * anyone in xfs_dqwait_unpin() if the count goes to 0.  The
 * dquot must have been previously pinned with a call to
 * xfs_qm_dquot_logitem_pin().
 */
STATIC void
xfs_qm_dquot_logitem_unpin(
        struct xfs_log_item     *lip,
        int                     remove)
{
        struct xfs_dquot        *dqp = DQUOT_ITEM(lip)->qli_dquot;

        ASSERT(atomic_read(&dqp->q_pincount) > 0);
        if (atomic_dec_and_test(&dqp->q_pincount))
                wake_up(&dqp->q_pinwait);
}

/*
 * Given the logitem, this writes the corresponding dquot entry to disk
 * asynchronously. This is called with the dquot entry securely locked;
 * we simply get xfs_qm_dqflush() to do the work, and unlock the dquot
 * at the end.
 */
STATIC void
xfs_qm_dquot_logitem_push(
        struct xfs_log_item     *lip)
{
        struct xfs_dquot        *dqp = DQUOT_ITEM(lip)->qli_dquot;
        int                     error;

        ASSERT(XFS_DQ_IS_LOCKED(dqp));
        ASSERT(!completion_done(&dqp->q_flush));

        /*
         * Since we were able to lock the dquot's flush lock and
         * we found it on the AIL, the dquot must be dirty.  This
         * is because the dquot is removed from the AIL while still
         * holding the flush lock in xfs_dqflush_done().  Thus, if
         * we found it in the AIL and were able to obtain the flush
         * lock without sleeping, then there must not have been
         * anyone in the process of flushing the dquot.
         */
        error = xfs_qm_dqflush(dqp, SYNC_TRYLOCK);
        if (error)
                xfs_warn(dqp->q_mount, "%s: push error %d on dqp %p",
                        __func__, error, dqp);
        xfs_dqunlock(dqp);
}

STATIC xfs_lsn_t
xfs_qm_dquot_logitem_committed(
        struct xfs_log_item     *lip,
        xfs_lsn_t               lsn)
{
        /*
         * We always re-log the entire dquot when it becomes dirty,
         * so, the latest copy _is_ the only one that matters.
         */
        return lsn;
}

/*
 * This is called to wait for the given dquot to be unpinned.
 * Most of these pin/unpin routines are plagiarized from inode code.
 */
void
xfs_qm_dqunpin_wait(
        struct xfs_dquot        *dqp)
{
        ASSERT(XFS_DQ_IS_LOCKED(dqp));
        if (atomic_read(&dqp->q_pincount) == 0)
                return;

        /*
         * Give the log a push so we don't wait here too long.
         */
        xfs_log_force(dqp->q_mount, 0);
        wait_event(dqp->q_pinwait, (atomic_read(&dqp->q_pincount) == 0));
}

/*
 * This is called when IOP_TRYLOCK returns XFS_ITEM_PUSHBUF to indicate that
 * the dquot is locked by us, but the flush lock isn't. So, here we are
 * going to see if the relevant dquot buffer is incore, waiting on DELWRI.
 * If so, we want to push it out to help us take this item off the AIL as soon
 * as possible.
 *
 * We must not be holding the AIL lock at this point. Calling incore() to
 * search the buffer cache can be a time consuming thing, and AIL lock is a
 * spinlock.
 */
STATIC bool
xfs_qm_dquot_logitem_pushbuf(
        struct xfs_log_item     *lip)
{
        struct xfs_dq_logitem   *qlip = DQUOT_ITEM(lip);
        struct xfs_dquot        *dqp = qlip->qli_dquot;
        struct xfs_buf          *bp;
        bool                    ret = true;

        ASSERT(XFS_DQ_IS_LOCKED(dqp));

        /*
         * If flushlock isn't locked anymore, chances are that the
         * inode flush completed and the inode was taken off the AIL.
         * So, just get out.
         */
        if (completion_done(&dqp->q_flush) ||
            !(lip->li_flags & XFS_LI_IN_AIL)) {
                xfs_dqunlock(dqp);
                return true;
        }

        bp = xfs_incore(dqp->q_mount->m_ddev_targp, qlip->qli_format.qlf_blkno,
                        dqp->q_mount->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK);
        xfs_dqunlock(dqp);
        if (!bp)
                return true;
        if (XFS_BUF_ISDELAYWRITE(bp))
                xfs_buf_delwri_promote(bp);
        if (xfs_buf_ispinned(bp))
                ret = false;
        xfs_buf_relse(bp);
        return ret;
}

/*
 * This is called to attempt to lock the dquot associated with this
 * dquot log item.  Don't sleep on the dquot lock or the flush lock.
 * If the flush lock is already held, indicating that the dquot has
 * been or is in the process of being flushed, then see if we can
 * find the dquot's buffer in the buffer cache without sleeping.  If
 * we can and it is marked delayed write, then we want to send it out.
 * We delay doing so until the push routine, though, to avoid sleeping
 * in any device strategy routines.
 */
STATIC uint
xfs_qm_dquot_logitem_trylock(
        struct xfs_log_item     *lip)
{
        struct xfs_dquot        *dqp = DQUOT_ITEM(lip)->qli_dquot;

        if (atomic_read(&dqp->q_pincount) > 0)
                return XFS_ITEM_PINNED;

        if (!xfs_dqlock_nowait(dqp))
                return XFS_ITEM_LOCKED;

        if (!xfs_dqflock_nowait(dqp)) {
                /*
                 * dquot has already been flushed to the backing buffer,
                 * leave it locked, pushbuf routine will unlock it.
                 */
                return XFS_ITEM_PUSHBUF;
        }

        ASSERT(lip->li_flags & XFS_LI_IN_AIL);
        return XFS_ITEM_SUCCESS;
}

/*
 * Unlock the dquot associated with the log item.
 * Clear the fields of the dquot and dquot log item that
 * are specific to the current transaction.  If the
 * hold flags is set, do not unlock the dquot.
 */
STATIC void
xfs_qm_dquot_logitem_unlock(
        struct xfs_log_item     *lip)
{
        struct xfs_dquot        *dqp = DQUOT_ITEM(lip)->qli_dquot;

        ASSERT(XFS_DQ_IS_LOCKED(dqp));

        /*
         * Clear the transaction pointer in the dquot
         */
        dqp->q_transp = NULL;

        /*
         * dquots are never 'held' from getting unlocked at the end of
         * a transaction.  Their locking and unlocking is hidden inside the
         * transaction layer, within trans_commit. Hence, no LI_HOLD flag
         * for the logitem.
         */
        xfs_dqunlock(dqp);
}

/*
 * this needs to stamp an lsn into the dquot, I think.
 * rpc's that look at user dquot's would then have to
 * push on the dependency recorded in the dquot
 */
STATIC void
xfs_qm_dquot_logitem_committing(
        struct xfs_log_item     *lip,
        xfs_lsn_t               lsn)
{
}

/*
 * This is the ops vector for dquots
 */
static const struct xfs_item_ops xfs_dquot_item_ops = {
        .iop_size       = xfs_qm_dquot_logitem_size,
        .iop_format     = xfs_qm_dquot_logitem_format,
        .iop_pin        = xfs_qm_dquot_logitem_pin,
        .iop_unpin      = xfs_qm_dquot_logitem_unpin,
        .iop_trylock    = xfs_qm_dquot_logitem_trylock,
        .iop_unlock     = xfs_qm_dquot_logitem_unlock,
        .iop_committed  = xfs_qm_dquot_logitem_committed,
        .iop_push       = xfs_qm_dquot_logitem_push,
        .iop_pushbuf    = xfs_qm_dquot_logitem_pushbuf,
        .iop_committing = xfs_qm_dquot_logitem_committing
};

/*
 * Initialize the dquot log item for a newly allocated dquot.
 * The dquot isn't locked at this point, but it isn't on any of the lists
 * either, so we don't care.
 */
void
xfs_qm_dquot_logitem_init(
        struct xfs_dquot        *dqp)
{
        struct xfs_dq_logitem   *lp = &dqp->q_logitem;

        xfs_log_item_init(dqp->q_mount, &lp->qli_item, XFS_LI_DQUOT,
                                        &xfs_dquot_item_ops);
        lp->qli_dquot = dqp;
        lp->qli_format.qlf_type = XFS_LI_DQUOT;
        lp->qli_format.qlf_id = be32_to_cpu(dqp->q_core.d_id);
        lp->qli_format.qlf_blkno = dqp->q_blkno;
        lp->qli_format.qlf_len = 1;
        /*
         * This is just the offset of this dquot within its buffer
         * (which is currently 1 FSB and probably won't change).
         * Hence 32 bits for this offset should be just fine.
         * Alternatively, we can store (bufoffset / sizeof(xfs_dqblk_t))
         * here, and recompute it at recovery time.
         */
        lp->qli_format.qlf_boffset = (__uint32_t)dqp->q_bufoffset;
}

/*------------------  QUOTAOFF LOG ITEMS  -------------------*/

static inline struct xfs_qoff_logitem *QOFF_ITEM(struct xfs_log_item *lip)
{
        return container_of(lip, struct xfs_qoff_logitem, qql_item);
}


/*
 * This returns the number of iovecs needed to log the given quotaoff item.
 * We only need 1 iovec for an quotaoff item.  It just logs the
 * quotaoff_log_format structure.
 */
STATIC uint
xfs_qm_qoff_logitem_size(
        struct xfs_log_item     *lip)
{
        return 1;
}

/*
 * This is called to fill in the vector of log iovecs for the
 * given quotaoff log item. We use only 1 iovec, and we point that
 * at the quotaoff_log_format structure embedded in the quotaoff item.
 * It is at this point that we assert that all of the extent
 * slots in the quotaoff item have been filled.
 */
STATIC void
xfs_qm_qoff_logitem_format(
        struct xfs_log_item     *lip,
        struct xfs_log_iovec    *log_vector)
{
        struct xfs_qoff_logitem *qflip = QOFF_ITEM(lip);

        ASSERT(qflip->qql_format.qf_type == XFS_LI_QUOTAOFF);

        log_vector->i_addr = &qflip->qql_format;
        log_vector->i_len = sizeof(xfs_qoff_logitem_t);
        log_vector->i_type = XLOG_REG_TYPE_QUOTAOFF;
        qflip->qql_format.qf_size = 1;
}

/*
 * Pinning has no meaning for an quotaoff item, so just return.
 */
STATIC void
xfs_qm_qoff_logitem_pin(
        struct xfs_log_item     *lip)
{
}

/*
 * Since pinning has no meaning for an quotaoff item, unpinning does
 * not either.
 */
STATIC void
xfs_qm_qoff_logitem_unpin(
        struct xfs_log_item     *lip,
        int                     remove)
{
}

/*
 * Quotaoff items have no locking, so just return success.
 */
STATIC uint
xfs_qm_qoff_logitem_trylock(
        struct xfs_log_item     *lip)
{
        return XFS_ITEM_LOCKED;
}

/*
 * Quotaoff items have no locking or pushing, so return failure
 * so that the caller doesn't bother with us.
 */
STATIC void
xfs_qm_qoff_logitem_unlock(
        struct xfs_log_item     *lip)
{
}

/*
 * The quotaoff-start-item is logged only once and cannot be moved in the log,
 * so simply return the lsn at which it's been logged.
 */
STATIC xfs_lsn_t
xfs_qm_qoff_logitem_committed(
        struct xfs_log_item     *lip,
        xfs_lsn_t               lsn)
{
        return lsn;
}

/*
 * There isn't much you can do to push on an quotaoff item.  It is simply
 * stuck waiting for the log to be flushed to disk.
 */
STATIC void
xfs_qm_qoff_logitem_push(
        struct xfs_log_item     *lip)
{
}


STATIC xfs_lsn_t
xfs_qm_qoffend_logitem_committed(
        struct xfs_log_item     *lip,
        xfs_lsn_t               lsn)
{
        struct xfs_qoff_logitem *qfe = QOFF_ITEM(lip);
        struct xfs_qoff_logitem *qfs = qfe->qql_start_lip;
        struct xfs_ail          *ailp = qfs->qql_item.li_ailp;

        /*
         * Delete the qoff-start logitem from the AIL.
         * xfs_trans_ail_delete() drops the AIL lock.
         */
        spin_lock(&ailp->xa_lock);
        xfs_trans_ail_delete(ailp, (xfs_log_item_t *)qfs);

        kmem_free(qfs);
        kmem_free(qfe);
        return (xfs_lsn_t)-1;
}

/*
 * XXX rcc - don't know quite what to do with this.  I think we can
 * just ignore it.  The only time that isn't the case is if we allow
 * the client to somehow see that quotas have been turned off in which
 * we can't allow that to get back until the quotaoff hits the disk.
 * So how would that happen?  Also, do we need different routines for
 * quotaoff start and quotaoff end?  I suspect the answer is yes but
 * to be sure, I need to look at the recovery code and see how quota off
 * recovery is handled (do we roll forward or back or do something else).
 * If we roll forwards or backwards, then we need two separate routines,
 * one that does nothing and one that stamps in the lsn that matters
 * (truly makes the quotaoff irrevocable).  If we do something else,
 * then maybe we don't need two.
 */
STATIC void
xfs_qm_qoff_logitem_committing(
        struct xfs_log_item     *lip,
        xfs_lsn_t               commit_lsn)
{
}

static const struct xfs_item_ops xfs_qm_qoffend_logitem_ops = {
        .iop_size       = xfs_qm_qoff_logitem_size,
        .iop_format     = xfs_qm_qoff_logitem_format,
        .iop_pin        = xfs_qm_qoff_logitem_pin,
        .iop_unpin      = xfs_qm_qoff_logitem_unpin,
        .iop_trylock    = xfs_qm_qoff_logitem_trylock,
        .iop_unlock     = xfs_qm_qoff_logitem_unlock,
        .iop_committed  = xfs_qm_qoffend_logitem_committed,
        .iop_push       = xfs_qm_qoff_logitem_push,
        .iop_committing = xfs_qm_qoff_logitem_committing
};

/*
 * This is the ops vector shared by all quotaoff-start log items.
 */
static const struct xfs_item_ops xfs_qm_qoff_logitem_ops = {
        .iop_size       = xfs_qm_qoff_logitem_size,
        .iop_format     = xfs_qm_qoff_logitem_format,
        .iop_pin        = xfs_qm_qoff_logitem_pin,
        .iop_unpin      = xfs_qm_qoff_logitem_unpin,
        .iop_trylock    = xfs_qm_qoff_logitem_trylock,
        .iop_unlock     = xfs_qm_qoff_logitem_unlock,
        .iop_committed  = xfs_qm_qoff_logitem_committed,
        .iop_push       = xfs_qm_qoff_logitem_push,
        .iop_committing = xfs_qm_qoff_logitem_committing
};

/*
 * Allocate and initialize an quotaoff item of the correct quota type(s).
 */
struct xfs_qoff_logitem *
xfs_qm_qoff_logitem_init(
        struct xfs_mount        *mp,
        struct xfs_qoff_logitem *start,
        uint                    flags)
{
        struct xfs_qoff_logitem *qf;

        qf = kmem_zalloc(sizeof(struct xfs_qoff_logitem), KM_SLEEP);

        xfs_log_item_init(mp, &qf->qql_item, XFS_LI_QUOTAOFF, start ?
                        &xfs_qm_qoffend_logitem_ops : &xfs_qm_qoff_logitem_ops);
        qf->qql_item.li_mountp = mp;
        qf->qql_format.qf_type = XFS_LI_QUOTAOFF;
        qf->qql_format.qf_flags = flags;
        qf->qql_start_lip = start;
        return qf;
}