Documentation/ABI/testing/sysfs-class-net-mesh

   1
   2 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
   3 Date:           May 2010
   4 Contact:        Marek Lindner <lindner_marek@yahoo.de>
   5 Description:
   6                 Indicates whether the batman protocol messages of the
   7                 mesh <mesh_iface> shall be aggregated or not.
   8
   9 What:           /sys/class/net/<mesh_iface>/mesh/bonding
  10 Date:           June 2010
  11 Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
  12 Description:
  13                 Indicates whether the data traffic going through the
  14                 mesh will be sent using multiple interfaces at the
  15                 same time (if available).
  16
  17 What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
  18 Date:           October 2010
  19 Contact:        Andreas Langer <an.langer@gmx.de>
  20 Description:
  21                 Indicates whether the data traffic going through the
  22                 mesh will be fragmented or silently discarded if the
  23                 packet size exceeds the outgoing interface MTU.
  24
  25 What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
  26 Date:           May 2011
  27 Contact:        Antonio Quartulli <ordex@autistici.org>
  28 Description:
  29                 Indicates whether the data traffic going from a
  30                 wireless client to another wireless client will be
  31                 silently dropped.
  32
  33 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
  34 Date:           October 2010
  35 Contact:        Marek Lindner <lindner_marek@yahoo.de>
  36 Description:
  37                 Defines the bandwidth which is propagated by this
  38                 node if gw_mode was set to 'server'.
  39
  40 What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
  41 Date:           October 2010
  42 Contact:        Marek Lindner <lindner_marek@yahoo.de>
  43 Description:
  44                 Defines the state of the gateway features. Can be
  45                 either 'off', 'client' or 'server'.
  46
  47 What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
  48 Date:           October 2010
  49 Contact:        Marek Lindner <lindner_marek@yahoo.de>
  50 Description:
  51                 Defines the selection criteria this node will use
  52                 to choose a gateway if gw_mode was set to 'client'.
  53
  54 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
  55 Date:           May 2010
  56 Contact:        Marek Lindner <lindner_marek@yahoo.de>
  57 Description:
  58                 Defines the interval in milliseconds in which batman
  59                 sends its protocol messages.
  60
  61 What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
  62 Date:           Oct 2010
  63 Contact:        Linus Lüssing <linus.luessing@web.de>
  64 Description:
  65                 Defines the penalty which will be applied to an
  66                 originator message's tq-field on every hop.
  67
  68 What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
  69 Date:           May 2010
  70 Contact:        Marek Lindner <lindner_marek@yahoo.de>
  71 Description:
  72                 Each batman node only maintains information about its
  73                 own local neighborhood, therefore generating graphs
  74                 showing the topology of the entire mesh is not easily
  75                 feasible without having a central instance to collect
  76                 the local topologies from all nodes. This file allows
  77                 to activate the collecting (server) mode.