spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / arm / boot / dts / at91sam9g20.dtsi
blob07603b8c95037b10d85739e2dfcafc77d62be7c7
1 /*
2  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
3  *
4  *  Copyright (C) 2011 Atmel,
5  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
6  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7  *
8  * Licensed under GPLv2 or later.
9  */
11 /include/ "skeleton.dtsi"
13 / {
14         model = "Atmel AT91SAM9G20 family SoC";
15         compatible = "atmel,at91sam9g20";
16         interrupt-parent = <&aic>;
18         aliases {
19                 serial0 = &dbgu;
20                 serial1 = &usart0;
21                 serial2 = &usart1;
22                 serial3 = &usart2;
23                 serial4 = &usart3;
24                 serial5 = &usart4;
25                 serial6 = &usart5;
26         };
27         cpus {
28                 cpu@0 {
29                         compatible = "arm,arm926ejs";
30                 };
31         };
33         memory@20000000 {
34                 reg = <0x20000000 0x08000000>;
35         };
37         ahb {
38                 compatible = "simple-bus";
39                 #address-cells = <1>;
40                 #size-cells = <1>;
41                 ranges;
43                 apb {
44                         compatible = "simple-bus";
45                         #address-cells = <1>;
46                         #size-cells = <1>;
47                         ranges;
49                         aic: interrupt-controller@fffff000 {
50                                 #interrupt-cells = <1>;
51                                 compatible = "atmel,at91rm9200-aic";
52                                 interrupt-controller;
53                                 interrupt-parent;
54                                 reg = <0xfffff000 0x200>;
55                         };
57                         dbgu: serial@fffff200 {
58                                 compatible = "atmel,at91sam9260-usart";
59                                 reg = <0xfffff200 0x200>;
60                                 interrupts = <1>;
61                                 status = "disabled";
62                         };
64                         usart0: serial@fffb0000 {
65                                 compatible = "atmel,at91sam9260-usart";
66                                 reg = <0xfffb0000 0x200>;
67                                 interrupts = <6>;
68                                 atmel,use-dma-rx;
69                                 atmel,use-dma-tx;
70                                 status = "disabled";
71                         };
73                         usart1: serial@fffb4000 {
74                                 compatible = "atmel,at91sam9260-usart";
75                                 reg = <0xfffb4000 0x200>;
76                                 interrupts = <7>;
77                                 atmel,use-dma-rx;
78                                 atmel,use-dma-tx;
79                                 status = "disabled";
80                         };
82                         usart2: serial@fffb8000 {
83                                 compatible = "atmel,at91sam9260-usart";
84                                 reg = <0xfffb8000 0x200>;
85                                 interrupts = <8>;
86                                 atmel,use-dma-rx;
87                                 atmel,use-dma-tx;
88                                 status = "disabled";
89                         };
91                         usart3: serial@fffd0000 {
92                                 compatible = "atmel,at91sam9260-usart";
93                                 reg = <0xfffd0000 0x200>;
94                                 interrupts = <23>;
95                                 atmel,use-dma-rx;
96                                 atmel,use-dma-tx;
97                                 status = "disabled";
98                         };
100                         usart4: serial@fffd4000 {
101                                 compatible = "atmel,at91sam9260-usart";
102                                 reg = <0xfffd4000 0x200>;
103                                 interrupts = <24>;
104                                 atmel,use-dma-rx;
105                                 atmel,use-dma-tx;
106                                 status = "disabled";
107                         };
109                         usart5: serial@fffd8000 {
110                                 compatible = "atmel,at91sam9260-usart";
111                                 reg = <0xfffd8000 0x200>;
112                                 interrupts = <25>;
113                                 atmel,use-dma-rx;
114                                 atmel,use-dma-tx;
115                                 status = "disabled";
116                         };
118                         macb0: ethernet@fffc4000 {
119                                 compatible = "cdns,at32ap7000-macb", "cdns,macb";
120                                 reg = <0xfffc4000 0x100>;
121                                 interrupts = <21>;
122                                 status = "disabled";
123                         };
124                 };
125         };