spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / arm / kernel / smp_scu.c
blob8f5dd7963356e9cef5116d067e53b75fb5f61636
1 /*
2 * linux/arch/arm/kernel/smp_scu.c
4 * Copyright (C) 2002 ARM Ltd.
5 * All Rights Reserved
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #include <linux/init.h>
12 #include <linux/io.h>
14 #include <asm/smp_scu.h>
15 #include <asm/cacheflush.h>
16 #include <asm/cputype.h>
18 #define SCU_CTRL 0x00
19 #define SCU_CONFIG 0x04
20 #define SCU_CPU_STATUS 0x08
21 #define SCU_INVALIDATE 0x0c
22 #define SCU_FPGA_REVISION 0x10
24 #ifdef CONFIG_SMP
26 * Get the number of CPU cores from the SCU configuration
28 unsigned int __init scu_get_core_count(void __iomem *scu_base)
30 unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
31 return (ncores & 0x03) + 1;
35 * Enable the SCU
37 void scu_enable(void __iomem *scu_base)
39 u32 scu_ctrl;
41 #ifdef CONFIG_ARM_ERRATA_764369
42 /* Cortex-A9 only */
43 if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
44 scu_ctrl = __raw_readl(scu_base + 0x30);
45 if (!(scu_ctrl & 1))
46 __raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
48 #endif
50 scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
51 /* already enabled? */
52 if (scu_ctrl & 1)
53 return;
55 scu_ctrl |= 1;
56 __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
59 * Ensure that the data accessed by CPU0 before the SCU was
60 * initialised is visible to the other CPUs.
62 flush_cache_all();
64 #endif
67 * Set the executing CPUs power mode as defined. This will be in
68 * preparation for it executing a WFI instruction.
70 * This function must be called with preemption disabled, and as it
71 * has the side effect of disabling coherency, caches must have been
72 * flushed. Interrupts must also have been disabled.
74 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
76 unsigned int val;
77 int cpu = smp_processor_id();
79 if (mode > 3 || mode == 1 || cpu > 3)
80 return -EINVAL;
82 val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
83 val |= mode;
84 __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
86 return 0;