arch/arm/mach-h720x/h7202-eval.c

   1 /*
   2  * linux/arch/arm/mach-h720x/h7202-eval.c
   3  *
   4  * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
   5  *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
   6  *               2004 Sascha Hauer <s.hauer@pengutronix.de>
   7  *
   8  * Architecture specific stuff for Hynix HMS30C7202 development board
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  *
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/kernel.h>
  18 #include <linux/types.h>
  19 #include <linux/string.h>
  20 #include <linux/platform_device.h>
  21
  22 #include <asm/setup.h>
  23 #include <asm/types.h>
  24 #include <asm/mach-types.h>
  25 #include <asm/page.h>
  26 #include <asm/mach/arch.h>
  27 #include <mach/irqs.h>
  28 #include <mach/hardware.h>
  29 #include "common.h"
  30
  31 static struct resource cirrus_resources[] = {
  32         [0] = {
  33                 .start  = ETH0_PHYS + 0x300,
  34                 .end    = ETH0_PHYS + 0x300 + 0x10,
  35                 .flags  = IORESOURCE_MEM,
  36         },
  37         [1] = {
  38                 .start  = IRQ_CHAINED_GPIOB(8),
  39                 .end    = IRQ_CHAINED_GPIOB(8),
  40                 .flags  = IORESOURCE_IRQ,
  41         },
  42 };
  43
  44 static struct platform_device cirrus_device = {
  45         .name           = "cirrus-cs89x0",
  46         .id             = -1,
  47         .num_resources  = ARRAY_SIZE(cirrus_resources),
  48         .resource       = cirrus_resources,
  49 };
  50
  51 static struct platform_device *devices[] __initdata = {
  52         &cirrus_device,
  53 };
  54
  55 /*
  56  * Hardware init. This is called early in initcalls
  57  * Place pin inits here. So you avoid adding ugly
  58  * #ifdef stuff to common drivers.
  59  * Use this only, if your bootloader is not able
  60  * to initialize the pins proper.
  61  */
  62 static void __init init_eval_h7202(void)
  63 {
  64         init_hw_h7202();
  65         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
  66
  67         /* Enable interrupt on portb bit 8 (ethernet) */
  68         CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
  69         CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
  70 }
  71
  72 MACHINE_START(H7202, "Hynix HMS30C7202")
  73         /* Maintainer: Robert Schwebel, Pengutronix */
  74         .atag_offset    = 0x100,
  75         .map_io         = h720x_map_io,
  76         .init_irq       = h7202_init_irq,
  77         .timer          = &h7202_timer,
  78         .init_machine   = init_eval_h7202,
  79         .dma_zone_size  = SZ_256M,
  80         .restart        = h720x_restart,
  81 MACHINE_END