spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / arm / mach-ks8695 / include / mach / regs-wan.h
blobc475bed22b8ebceeaad05ebaf0de41cbf6547924
1 /*
2 * arch/arm/mach-ks8695/include/mach/regs-wan.h
4 * Copyright (C) 2006 Andrew Victor
6 * KS8695 - WAN Registers and bit definitions.
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without any
10 * warranty of any kind, whether express or implied.
13 #ifndef KS8695_WAN_H
14 #define KS8695_WAN_H
16 #define KS8695_WAN_OFFSET (0xF0000 + 0x6000)
17 #define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET)
18 #define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET)
22 * WAN registers
24 #define KS8695_WMDTXC (0x00) /* DMA Transmit Control */
25 #define KS8695_WMDRXC (0x04) /* DMA Receive Control */
26 #define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */
27 #define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */
28 #define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */
29 #define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */
30 #define KS8695_WMAL (0x18) /* MAC Station Address Low */
31 #define KS8695_WMAH (0x1c) /* MAC Station Address High */
32 #define KS8695_WMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */
33 #define KS8695_WMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */
36 /* DMA Transmit Control Register */
37 #define WMDTXC_WMTRST (1 << 31) /* Soft Reset */
38 #define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */
39 #define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */
40 #define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */
41 #define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */
42 #define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */
43 #define WMDTXC_WMTLB (1 << 8) /* Loopback mode */
44 #define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */
45 #define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */
46 #define WMDTXC_WMTE (1 << 0) /* TX Enable */
48 /* DMA Receive Control Register */
49 #define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */
50 #define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */
51 #define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */
52 #define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */
53 #define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */
54 #define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */
55 #define WMDRXC_WMRM (1 << 5) /* Receive Multicast */
56 #define WMDRXC_WMRU (1 << 4) /* Receive Unicast */
57 #define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */
58 #define WMDRXC_WMRA (1 << 2) /* Receive All */
59 #define WMDRXC_WMRE (1 << 0) /* RX Enable */
61 /* Additional Station Address High */
62 #define WMAAH_E (1 << 31) /* Address Enabled */
65 #endif