spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / arm / mach-pxa / reset.c
blobc8497b00cdfe8bcb66f791c2907fbea345290571
1 /*
2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
5 */
6 #include <linux/kernel.h>
7 #include <linux/module.h>
8 #include <linux/delay.h>
9 #include <linux/gpio.h>
10 #include <linux/io.h>
11 #include <asm/proc-fns.h>
13 #include <mach/regs-ost.h>
14 #include <mach/reset.h>
16 unsigned int reset_status;
17 EXPORT_SYMBOL(reset_status);
19 static void do_hw_reset(void);
21 static int reset_gpio = -1;
23 int init_gpio_reset(int gpio, int output, int level)
25 int rc;
27 rc = gpio_request(gpio, "reset generator");
28 if (rc) {
29 printk(KERN_ERR "Can't request reset_gpio\n");
30 goto out;
33 if (output)
34 rc = gpio_direction_output(gpio, level);
35 else
36 rc = gpio_direction_input(gpio);
37 if (rc) {
38 printk(KERN_ERR "Can't configure reset_gpio\n");
39 gpio_free(gpio);
40 goto out;
43 out:
44 if (!rc)
45 reset_gpio = gpio;
47 return rc;
51 * Trigger GPIO reset.
52 * This covers various types of logic connecting gpio pin
53 * to RESET pins (nRESET or GPIO_RESET):
55 static void do_gpio_reset(void)
57 BUG_ON(reset_gpio == -1);
59 /* drive it low */
60 gpio_direction_output(reset_gpio, 0);
61 mdelay(2);
62 /* rising edge or drive high */
63 gpio_set_value(reset_gpio, 1);
64 mdelay(2);
65 /* falling edge */
66 gpio_set_value(reset_gpio, 0);
68 /* give it some time */
69 mdelay(10);
71 WARN_ON(1);
72 /* fallback */
73 do_hw_reset();
76 static void do_hw_reset(void)
78 /* Initialize the watchdog and let it fire */
79 OWER = OWER_WME;
80 OSSR = OSSR_M3;
81 OSMR3 = OSCR + 368640; /* ... in 100 ms */
84 void pxa_restart(char mode, const char *cmd)
86 local_irq_disable();
87 local_fiq_disable();
89 clear_reset_status(RESET_STATUS_ALL);
91 switch (mode) {
92 case 's':
93 /* Jump into ROM at address 0 */
94 soft_restart(0);
95 break;
96 case 'g':
97 do_gpio_reset();
98 break;
99 case 'h':
100 default:
101 do_hw_reset();
102 break;