spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / arm / mach-shmobile / clock-r8a7740.c
blob3b35b9afc001c5daf8ccfd199e778dddda92b468
1 /*
2 * R8A7740 processor support
4 * Copyright (C) 2011 Renesas Solutions Corp.
5 * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/io.h>
23 #include <linux/sh_clk.h>
24 #include <linux/clkdev.h>
25 #include <mach/common.h>
26 #include <mach/r8a7740.h>
29 * | MDx | XTAL1/EXTAL1 | System | EXTALR |
30 * Clock |-------+-----------------+ clock | 32.768 | RCLK
31 * Mode | 2/1/0 | src MHz | source | KHz | source
32 * -------+-------+-----------------+-----------+--------+----------
33 * 0 | 0 0 0 | External 20~50 | XTAL1 | O | EXTALR
34 * 1 | 0 0 1 | Crystal 20~30 | XTAL1 | O | EXTALR
35 * 2 | 0 1 0 | External 40~50 | XTAL1 / 2 | O | EXTALR
36 * 3 | 0 1 1 | Crystal 40~50 | XTAL1 / 2 | O | EXTALR
37 * 4 | 1 0 0 | External 20~50 | XTAL1 | x | XTAL1 / 1024
38 * 5 | 1 0 1 | Crystal 20~30 | XTAL1 | x | XTAL1 / 1024
39 * 6 | 1 1 0 | External 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
40 * 7 | 1 1 1 | Crystal 40~50 | XTAL1 / 2 | x | XTAL1 / 2048
43 /* CPG registers */
44 #define FRQCRA 0xe6150000
45 #define FRQCRB 0xe6150004
46 #define FRQCRC 0xe61500e0
47 #define PLLC01CR 0xe6150028
49 #define SUBCKCR 0xe6150080
51 #define MSTPSR0 0xe6150030
52 #define MSTPSR1 0xe6150038
53 #define MSTPSR2 0xe6150040
54 #define MSTPSR3 0xe6150048
55 #define MSTPSR4 0xe615004c
56 #define SMSTPCR0 0xe6150130
57 #define SMSTPCR1 0xe6150134
58 #define SMSTPCR2 0xe6150138
59 #define SMSTPCR3 0xe615013c
60 #define SMSTPCR4 0xe6150140
62 /* Fixed 32 KHz root clock from EXTALR pin */
63 static struct clk extalr_clk = {
64 .rate = 32768,
68 * 25MHz default rate for the EXTAL1 root input clock.
69 * If needed, reset this with clk_set_rate() from the platform code.
71 static struct clk extal1_clk = {
72 .rate = 25000000,
76 * 48MHz default rate for the EXTAL2 root input clock.
77 * If needed, reset this with clk_set_rate() from the platform code.
79 static struct clk extal2_clk = {
80 .rate = 48000000,
84 * 27MHz default rate for the DV_CLKI root input clock.
85 * If needed, reset this with clk_set_rate() from the platform code.
87 static struct clk dv_clk = {
88 .rate = 27000000,
91 static unsigned long div_recalc(struct clk *clk)
93 return clk->parent->rate / (int)(clk->priv);
96 static struct clk_ops div_clk_ops = {
97 .recalc = div_recalc,
100 /* extal1 / 2 */
101 static struct clk extal1_div2_clk = {
102 .ops = &div_clk_ops,
103 .priv = (void *)2,
104 .parent = &extal1_clk,
107 /* extal1 / 1024 */
108 static struct clk extal1_div1024_clk = {
109 .ops = &div_clk_ops,
110 .priv = (void *)1024,
111 .parent = &extal1_clk,
114 /* extal1 / 2 / 1024 */
115 static struct clk extal1_div2048_clk = {
116 .ops = &div_clk_ops,
117 .priv = (void *)1024,
118 .parent = &extal1_div2_clk,
121 /* extal2 / 2 */
122 static struct clk extal2_div2_clk = {
123 .ops = &div_clk_ops,
124 .priv = (void *)2,
125 .parent = &extal2_clk,
128 static struct clk_ops followparent_clk_ops = {
129 .recalc = followparent_recalc,
132 /* Main clock */
133 static struct clk system_clk = {
134 .ops = &followparent_clk_ops,
137 static struct clk system_div2_clk = {
138 .ops = &div_clk_ops,
139 .priv = (void *)2,
140 .parent = &system_clk,
143 /* r_clk */
144 static struct clk r_clk = {
145 .ops = &followparent_clk_ops,
148 /* PLLC0/PLLC1 */
149 static unsigned long pllc01_recalc(struct clk *clk)
151 unsigned long mult = 1;
153 if (__raw_readl(PLLC01CR) & (1 << 14))
154 mult = ((__raw_readl(clk->enable_reg) >> 24) & 0x7f) + 1;
156 return clk->parent->rate * mult;
159 static struct clk_ops pllc01_clk_ops = {
160 .recalc = pllc01_recalc,
163 static struct clk pllc0_clk = {
164 .ops = &pllc01_clk_ops,
165 .flags = CLK_ENABLE_ON_INIT,
166 .parent = &system_clk,
167 .enable_reg = (void __iomem *)FRQCRC,
170 static struct clk pllc1_clk = {
171 .ops = &pllc01_clk_ops,
172 .flags = CLK_ENABLE_ON_INIT,
173 .parent = &system_div2_clk,
174 .enable_reg = (void __iomem *)FRQCRA,
177 /* PLLC1 / 2 */
178 static struct clk pllc1_div2_clk = {
179 .ops = &div_clk_ops,
180 .priv = (void *)2,
181 .parent = &pllc1_clk,
184 struct clk *main_clks[] = {
185 &extalr_clk,
186 &extal1_clk,
187 &extal2_clk,
188 &extal1_div2_clk,
189 &extal1_div1024_clk,
190 &extal1_div2048_clk,
191 &extal2_div2_clk,
192 &dv_clk,
193 &system_clk,
194 &system_div2_clk,
195 &r_clk,
196 &pllc0_clk,
197 &pllc1_clk,
198 &pllc1_div2_clk,
201 static void div4_kick(struct clk *clk)
203 unsigned long value;
205 /* set KICK bit in FRQCRB to update hardware setting */
206 value = __raw_readl(FRQCRB);
207 value |= (1 << 31);
208 __raw_writel(value, FRQCRB);
211 static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
212 24, 32, 36, 48, 0, 72, 96, 0 };
214 static struct clk_div_mult_table div4_div_mult_table = {
215 .divisors = divisors,
216 .nr_divisors = ARRAY_SIZE(divisors),
219 static struct clk_div4_table div4_table = {
220 .div_mult_table = &div4_div_mult_table,
221 .kick = div4_kick,
224 enum {
225 DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
226 DIV4_HPP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
227 DIV4_NR
230 struct clk div4_clks[DIV4_NR] = {
231 [DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
232 [DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
233 [DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
234 [DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
235 [DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
236 [DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
237 [DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
238 [DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
239 [DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
240 [DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
243 enum {
244 DIV6_SUB,
245 DIV6_NR
248 static struct clk div6_clks[DIV6_NR] = {
249 [DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
252 enum {
253 MSTP125,
254 MSTP116, MSTP111, MSTP100, MSTP117,
256 MSTP230,
257 MSTP222,
258 MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
260 MSTP329, MSTP323,
262 MSTP_NR
265 static struct clk mstp_clks[MSTP_NR] = {
266 [MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
267 [MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
268 [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
269 [MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
270 [MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
272 [MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
273 [MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
274 [MSTP207] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
275 [MSTP206] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
276 [MSTP204] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
277 [MSTP203] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
278 [MSTP202] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
279 [MSTP201] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
280 [MSTP200] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
282 [MSTP329] = SH_CLK_MSTP32(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
283 [MSTP323] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
286 static struct clk_lookup lookups[] = {
287 /* main clocks */
288 CLKDEV_CON_ID("extalr", &extalr_clk),
289 CLKDEV_CON_ID("extal1", &extal1_clk),
290 CLKDEV_CON_ID("extal2", &extal2_clk),
291 CLKDEV_CON_ID("extal1_div2", &extal1_div2_clk),
292 CLKDEV_CON_ID("extal1_div1024", &extal1_div1024_clk),
293 CLKDEV_CON_ID("extal1_div2048", &extal1_div2048_clk),
294 CLKDEV_CON_ID("extal2_div2", &extal2_div2_clk),
295 CLKDEV_CON_ID("dv_clk", &dv_clk),
296 CLKDEV_CON_ID("system_clk", &system_clk),
297 CLKDEV_CON_ID("system_div2_clk", &system_div2_clk),
298 CLKDEV_CON_ID("r_clk", &r_clk),
299 CLKDEV_CON_ID("pllc0_clk", &pllc0_clk),
300 CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
301 CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
303 /* DIV4 clocks */
304 CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
305 CLKDEV_CON_ID("zg_clk", &div4_clks[DIV4_ZG]),
306 CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
307 CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
308 CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
309 CLKDEV_CON_ID("hpp_clk", &div4_clks[DIV4_HPP]),
310 CLKDEV_CON_ID("s_clk", &div4_clks[DIV4_S]),
311 CLKDEV_CON_ID("zb_clk", &div4_clks[DIV4_ZB]),
312 CLKDEV_CON_ID("m3_clk", &div4_clks[DIV4_M3]),
313 CLKDEV_CON_ID("cp_clk", &div4_clks[DIV4_CP]),
315 /* DIV6 clocks */
316 CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
318 /* MSTP32 clocks */
319 CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]),
320 CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP111]),
321 CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]),
322 CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]),
323 CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]),
325 CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]),
326 CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]),
327 CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]),
328 CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
329 CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
330 CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]),
331 CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]),
333 CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
334 CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
336 CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]),
337 CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]),
340 void __init r8a7740_clock_init(u8 md_ck)
342 int k, ret = 0;
344 /* detect system clock parent */
345 if (md_ck & MD_CK1)
346 system_clk.parent = &extal1_div2_clk;
347 else
348 system_clk.parent = &extal1_clk;
350 /* detect RCLK parent */
351 switch (md_ck & (MD_CK2 | MD_CK1)) {
352 case MD_CK2 | MD_CK1:
353 r_clk.parent = &extal1_div2048_clk;
354 break;
355 case MD_CK2:
356 r_clk.parent = &extal1_div1024_clk;
357 break;
358 case MD_CK1:
359 default:
360 r_clk.parent = &extalr_clk;
361 break;
364 for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
365 ret = clk_register(main_clks[k]);
367 if (!ret)
368 ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
370 if (!ret)
371 ret = sh_clk_div6_register(div6_clks, DIV6_NR);
373 if (!ret)
374 ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
376 clkdev_add_table(lookups, ARRAY_SIZE(lookups));
378 if (!ret)
379 clk_init();
380 else
381 panic("failed to setup r8a7740 clocks\n");