spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / arch / mips / pci / pci.c
blob15521505ebe80a4a6975f11905e4694111474a08
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License as published by the
4 * Free Software Foundation; either version 2 of the License, or (at your
5 * option) any later version.
7 * Copyright (C) 2003, 04, 11 Ralf Baechle (ralf@linux-mips.org)
8 * Copyright (C) 2011 Wind River Systems,
9 * written by Ralf Baechle (ralf@linux-mips.org)
11 #include <linux/bug.h>
12 #include <linux/kernel.h>
13 #include <linux/mm.h>
14 #include <linux/bootmem.h>
15 #include <linux/export.h>
16 #include <linux/init.h>
17 #include <linux/types.h>
18 #include <linux/pci.h>
20 #include <asm/cpu-info.h>
23 * Indicate whether we respect the PCI setup left by the firmware.
25 * Make this long-lived so that we know when shutting down
26 * whether we probed only or not.
28 int pci_probe_only;
30 #define PCI_ASSIGN_ALL_BUSSES 1
32 unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
35 * The PCI controller list.
38 static struct pci_controller *hose_head, **hose_tail = &hose_head;
40 unsigned long PCIBIOS_MIN_IO;
41 unsigned long PCIBIOS_MIN_MEM;
43 static int pci_initialized;
46 * We need to avoid collisions with `mirrored' VGA ports
47 * and other strange ISA hardware, so we always want the
48 * addresses to be allocated in the 0x000-0x0ff region
49 * modulo 0x400.
51 * Why? Because some silly external IO cards only decode
52 * the low 10 bits of the IO address. The 0x00-0xff region
53 * is reserved for motherboard devices that decode all 16
54 * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
55 * but we want to try to avoid allocating at 0x2900-0x2bff
56 * which might have be mirrored at 0x0100-0x03ff..
58 resource_size_t
59 pcibios_align_resource(void *data, const struct resource *res,
60 resource_size_t size, resource_size_t align)
62 struct pci_dev *dev = data;
63 struct pci_controller *hose = dev->sysdata;
64 resource_size_t start = res->start;
66 if (res->flags & IORESOURCE_IO) {
67 /* Make sure we start at our min on all hoses */
68 if (start < PCIBIOS_MIN_IO + hose->io_resource->start)
69 start = PCIBIOS_MIN_IO + hose->io_resource->start;
72 * Put everything into 0x00-0xff region modulo 0x400
74 if (start & 0x300)
75 start = (start + 0x3ff) & ~0x3ff;
76 } else if (res->flags & IORESOURCE_MEM) {
77 /* Make sure we start at our min on all hoses */
78 if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
79 start = PCIBIOS_MIN_MEM + hose->mem_resource->start;
82 return start;
85 static void __devinit pcibios_scanbus(struct pci_controller *hose)
87 static int next_busno;
88 static int need_domain_info;
89 LIST_HEAD(resources);
90 struct pci_bus *bus;
92 if (!hose->iommu)
93 PCI_DMA_BUS_IS_PHYS = 1;
95 if (hose->get_busno && pci_probe_only)
96 next_busno = (*hose->get_busno)();
98 pci_add_resource(&resources, hose->mem_resource);
99 pci_add_resource(&resources, hose->io_resource);
100 bus = pci_scan_root_bus(NULL, next_busno, hose->pci_ops, hose,
101 &resources);
102 if (!bus)
103 pci_free_resource_list(&resources);
105 hose->bus = bus;
107 need_domain_info = need_domain_info || hose->index;
108 hose->need_domain_info = need_domain_info;
109 if (bus) {
110 next_busno = bus->subordinate + 1;
111 /* Don't allow 8-bit bus number overflow inside the hose -
112 reserve some space for bridges. */
113 if (next_busno > 224) {
114 next_busno = 0;
115 need_domain_info = 1;
118 if (!pci_probe_only) {
119 pci_bus_size_bridges(bus);
120 pci_bus_assign_resources(bus);
121 pci_enable_bridges(bus);
126 static DEFINE_MUTEX(pci_scan_mutex);
128 void __devinit register_pci_controller(struct pci_controller *hose)
130 if (request_resource(&iomem_resource, hose->mem_resource) < 0)
131 goto out;
132 if (request_resource(&ioport_resource, hose->io_resource) < 0) {
133 release_resource(hose->mem_resource);
134 goto out;
137 *hose_tail = hose;
138 hose_tail = &hose->next;
141 * Do not panic here but later - this might happen before console init.
143 if (!hose->io_map_base) {
144 printk(KERN_WARNING
145 "registering PCI controller with io_map_base unset\n");
149 * Scan the bus if it is register after the PCI subsystem
150 * initialization.
152 if (pci_initialized) {
153 mutex_lock(&pci_scan_mutex);
154 pcibios_scanbus(hose);
155 mutex_unlock(&pci_scan_mutex);
158 return;
160 out:
161 printk(KERN_WARNING
162 "Skipping PCI bus scan due to resource conflict\n");
165 static void __init pcibios_set_cache_line_size(void)
167 struct cpuinfo_mips *c = &current_cpu_data;
168 unsigned int lsize;
171 * Set PCI cacheline size to that of the highest level in the
172 * cache hierarchy.
174 lsize = c->dcache.linesz;
175 lsize = c->scache.linesz ? : lsize;
176 lsize = c->tcache.linesz ? : lsize;
178 BUG_ON(!lsize);
180 pci_dfl_cache_line_size = lsize >> 2;
182 pr_debug("PCI: pci_cache_line_size set to %d bytes\n", lsize);
185 static int __init pcibios_init(void)
187 struct pci_controller *hose;
189 pcibios_set_cache_line_size();
191 /* Scan all of the recorded PCI controllers. */
192 for (hose = hose_head; hose; hose = hose->next)
193 pcibios_scanbus(hose);
195 pci_fixup_irqs(pci_common_swizzle, pcibios_map_irq);
197 pci_initialized = 1;
199 return 0;
202 subsys_initcall(pcibios_init);
204 static int pcibios_enable_resources(struct pci_dev *dev, int mask)
206 u16 cmd, old_cmd;
207 int idx;
208 struct resource *r;
210 pci_read_config_word(dev, PCI_COMMAND, &cmd);
211 old_cmd = cmd;
212 for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
213 /* Only set up the requested stuff */
214 if (!(mask & (1<<idx)))
215 continue;
217 r = &dev->resource[idx];
218 if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
219 continue;
220 if ((idx == PCI_ROM_RESOURCE) &&
221 (!(r->flags & IORESOURCE_ROM_ENABLE)))
222 continue;
223 if (!r->start && r->end) {
224 printk(KERN_ERR "PCI: Device %s not available "
225 "because of resource collisions\n",
226 pci_name(dev));
227 return -EINVAL;
229 if (r->flags & IORESOURCE_IO)
230 cmd |= PCI_COMMAND_IO;
231 if (r->flags & IORESOURCE_MEM)
232 cmd |= PCI_COMMAND_MEMORY;
234 if (cmd != old_cmd) {
235 printk("PCI: Enabling device %s (%04x -> %04x)\n",
236 pci_name(dev), old_cmd, cmd);
237 pci_write_config_word(dev, PCI_COMMAND, cmd);
239 return 0;
242 unsigned int pcibios_assign_all_busses(void)
244 return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
247 int pcibios_enable_device(struct pci_dev *dev, int mask)
249 int err;
251 if ((err = pcibios_enable_resources(dev, mask)) < 0)
252 return err;
254 return pcibios_plat_dev_init(dev);
257 static void pcibios_fixup_device_resources(struct pci_dev *dev,
258 struct pci_bus *bus)
260 /* Update device resources. */
261 struct pci_controller *hose = (struct pci_controller *)bus->sysdata;
262 unsigned long offset = 0;
263 int i;
265 for (i = 0; i < PCI_NUM_RESOURCES; i++) {
266 if (!dev->resource[i].start)
267 continue;
268 if (dev->resource[i].flags & IORESOURCE_IO)
269 offset = hose->io_offset;
270 else if (dev->resource[i].flags & IORESOURCE_MEM)
271 offset = hose->mem_offset;
273 dev->resource[i].start += offset;
274 dev->resource[i].end += offset;
278 void __devinit pcibios_fixup_bus(struct pci_bus *bus)
280 /* Propagate hose info into the subordinate devices. */
282 struct pci_dev *dev = bus->self;
284 if (pci_probe_only && dev &&
285 (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
286 pci_read_bridge_bases(bus);
287 pcibios_fixup_device_resources(dev, bus);
290 list_for_each_entry(dev, &bus->devices, bus_list) {
291 if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
292 pcibios_fixup_device_resources(dev, bus);
296 void __init
297 pcibios_update_irq(struct pci_dev *dev, int irq)
299 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
302 void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
303 struct resource *res)
305 struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
306 unsigned long offset = 0;
308 if (res->flags & IORESOURCE_IO)
309 offset = hose->io_offset;
310 else if (res->flags & IORESOURCE_MEM)
311 offset = hose->mem_offset;
313 region->start = res->start - offset;
314 region->end = res->end - offset;
317 void __devinit
318 pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
319 struct pci_bus_region *region)
321 struct pci_controller *hose = (struct pci_controller *)dev->sysdata;
322 unsigned long offset = 0;
324 if (res->flags & IORESOURCE_IO)
325 offset = hose->io_offset;
326 else if (res->flags & IORESOURCE_MEM)
327 offset = hose->mem_offset;
329 res->start = region->start + offset;
330 res->end = region->end + offset;
333 #ifdef CONFIG_HOTPLUG
334 EXPORT_SYMBOL(pcibios_resource_to_bus);
335 EXPORT_SYMBOL(pcibios_bus_to_resource);
336 EXPORT_SYMBOL(PCIBIOS_MIN_IO);
337 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
338 #endif
340 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
341 enum pci_mmap_state mmap_state, int write_combine)
343 unsigned long prot;
346 * I/O space can be accessed via normal processor loads and stores on
347 * this platform but for now we elect not to do this and portable
348 * drivers should not do this anyway.
350 if (mmap_state == pci_mmap_io)
351 return -EINVAL;
354 * Ignore write-combine; for now only return uncached mappings.
356 prot = pgprot_val(vma->vm_page_prot);
357 prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
358 vma->vm_page_prot = __pgprot(prot);
360 return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
361 vma->vm_end - vma->vm_start, vma->vm_page_prot);
364 char * (*pcibios_plat_setup)(char *str) __devinitdata;
366 char *__devinit pcibios_setup(char *str)
368 if (pcibios_plat_setup)
369 return pcibios_plat_setup(str);
370 return str;