spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / ata / pata_isapnp.c
blob4bceb8803a10f50baee31c9c39233282ebbc6e91
2 /*
3 * pata-isapnp.c - ISA PnP PATA controller driver.
4 * Copyright 2005/2006 Red Hat Inc, all rights reserved.
6 * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru>
7 */
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/isapnp.h>
12 #include <linux/init.h>
13 #include <linux/blkdev.h>
14 #include <linux/delay.h>
15 #include <scsi/scsi_host.h>
16 #include <linux/ata.h>
17 #include <linux/libata.h>
19 #define DRV_NAME "pata_isapnp"
20 #define DRV_VERSION "0.2.5"
22 static struct scsi_host_template isapnp_sht = {
23 ATA_PIO_SHT(DRV_NAME),
26 static struct ata_port_operations isapnp_port_ops = {
27 .inherits = &ata_sff_port_ops,
28 .cable_detect = ata_cable_40wire,
31 static struct ata_port_operations isapnp_noalt_port_ops = {
32 .inherits = &ata_sff_port_ops,
33 .cable_detect = ata_cable_40wire,
34 /* No altstatus so we don't want to use the lost interrupt poll */
35 .lost_interrupt = ATA_OP_NULL,
38 /**
39 * isapnp_init_one - attach an isapnp interface
40 * @idev: PnP device
41 * @dev_id: matching detect line
43 * Register an ISA bus IDE interface. Such interfaces are PIO 0 and
44 * non shared IRQ.
47 static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id)
49 struct ata_host *host;
50 struct ata_port *ap;
51 void __iomem *cmd_addr, *ctl_addr;
52 int irq = 0;
53 irq_handler_t handler = NULL;
55 if (pnp_port_valid(idev, 0) == 0)
56 return -ENODEV;
58 if (pnp_irq_valid(idev, 0)) {
59 irq = pnp_irq(idev, 0);
60 handler = ata_sff_interrupt;
63 /* allocate host */
64 host = ata_host_alloc(&idev->dev, 1);
65 if (!host)
66 return -ENOMEM;
68 /* acquire resources and fill host */
69 cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8);
70 if (!cmd_addr)
71 return -ENOMEM;
73 ap = host->ports[0];
75 ap->ops = &isapnp_noalt_port_ops;
76 ap->pio_mask = ATA_PIO0;
77 ap->flags |= ATA_FLAG_SLAVE_POSS;
79 ap->ioaddr.cmd_addr = cmd_addr;
81 if (pnp_port_valid(idev, 1) == 0) {
82 ctl_addr = devm_ioport_map(&idev->dev,
83 pnp_port_start(idev, 1), 1);
84 ap->ioaddr.altstatus_addr = ctl_addr;
85 ap->ioaddr.ctl_addr = ctl_addr;
86 ap->ops = &isapnp_port_ops;
89 ata_sff_std_ports(&ap->ioaddr);
91 ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
92 (unsigned long long)pnp_port_start(idev, 0),
93 (unsigned long long)pnp_port_start(idev, 1));
95 /* activate */
96 return ata_host_activate(host, irq, handler, 0,
97 &isapnp_sht);
101 * isapnp_remove_one - unplug an isapnp interface
102 * @idev: PnP device
104 * Remove a previously configured PnP ATA port. Called only on module
105 * unload events as the core does not currently deal with ISAPnP docking.
108 static void isapnp_remove_one(struct pnp_dev *idev)
110 struct device *dev = &idev->dev;
111 struct ata_host *host = dev_get_drvdata(dev);
113 ata_host_detach(host);
116 static struct pnp_device_id isapnp_devices[] = {
117 /* Generic ESDI/IDE/ATA compatible hard disk controller */
118 {.id = "PNP0600", .driver_data = 0},
119 {.id = ""}
122 MODULE_DEVICE_TABLE(pnp, isapnp_devices);
124 static struct pnp_driver isapnp_driver = {
125 .name = DRV_NAME,
126 .id_table = isapnp_devices,
127 .probe = isapnp_init_one,
128 .remove = isapnp_remove_one,
131 static int __init isapnp_init(void)
133 return pnp_register_driver(&isapnp_driver);
136 static void __exit isapnp_exit(void)
138 pnp_unregister_driver(&isapnp_driver);
141 MODULE_AUTHOR("Alan Cox");
142 MODULE_DESCRIPTION("low-level driver for ISA PnP ATA");
143 MODULE_LICENSE("GPL");
144 MODULE_VERSION(DRV_VERSION);
146 module_init(isapnp_init);
147 module_exit(isapnp_exit);