drivers/i2c/busses/i2c-ixp2000.c

   1 /*
   2  * drivers/i2c/busses/i2c-ixp2000.c
   3  *
   4  * I2C adapter for IXP2000 systems using GPIOs for I2C bus
   5  *
   6  * Author: Deepak Saxena <dsaxena@plexity.net>
   7  * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com>
   8  * Made generic by: Jeff Daly <jeffrey.daly@intel.com>
   9  *
  10  * Copyright (c) 2003-2004 MontaVista Software Inc.
  11  *
  12  * This file is licensed under  the terms of the GNU General Public
  13  * License version 2. This program is licensed "as is" without any
  14  * warranty of any kind, whether express or implied.
  15  *
  16  * From Jeff Daly:
  17  *
  18  * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any
  19  * IXP2000 platform if it uses the HW GPIO in the same manner.  Basically,
  20  * SDA and SCL GPIOs have external pullups.  Setting the respective GPIO to
  21  * an input will make the signal a '1' via the pullup.  Setting them to
  22  * outputs will pull them down.
  23  *
  24  * The GPIOs are open drain signals and are used as configuration strap inputs
  25  * during power-up so there's generally a buffer on the board that needs to be
  26  * 'enabled' to drive the GPIOs.
  27  */
  28
  29 #include <linux/kernel.h>
  30 #include <linux/init.h>
  31 #include <linux/platform_device.h>
  32 #include <linux/module.h>
  33 #include <linux/i2c.h>
  34 #include <linux/i2c-algo-bit.h>
  35 #include <linux/slab.h>
  36
  37 #include <mach/hardware.h>      /* Pick up IXP2000-specific bits */
  38 #include <mach/gpio-ixp2000.h>
  39
  40 static inline int ixp2000_scl_pin(void *data)
  41 {
  42         return ((struct ixp2000_i2c_pins*)data)->scl_pin;
  43 }
  44
  45 static inline int ixp2000_sda_pin(void *data)
  46 {
  47         return ((struct ixp2000_i2c_pins*)data)->sda_pin;
  48 }
  49
  50
  51 static void ixp2000_bit_setscl(void *data, int val)
  52 {
  53         int i = 5000;
  54
  55         if (val) {
  56                 gpio_line_config(ixp2000_scl_pin(data), GPIO_IN);
  57                 while(!gpio_line_get(ixp2000_scl_pin(data)) && i--);
  58         } else {
  59                 gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT);
  60         }
  61 }
  62
  63 static void ixp2000_bit_setsda(void *data, int val)
  64 {
  65         if (val) {
  66                 gpio_line_config(ixp2000_sda_pin(data), GPIO_IN);
  67         } else {
  68                 gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT);
  69         }
  70 }
  71
  72 static int ixp2000_bit_getscl(void *data)
  73 {
  74         return gpio_line_get(ixp2000_scl_pin(data));
  75 }
  76
  77 static int ixp2000_bit_getsda(void *data)
  78 {
  79         return gpio_line_get(ixp2000_sda_pin(data));
  80 }
  81
  82 struct ixp2000_i2c_data {
  83         struct ixp2000_i2c_pins *gpio_pins;
  84         struct i2c_adapter adapter;
  85         struct i2c_algo_bit_data algo_data;
  86 };
  87
  88 static int ixp2000_i2c_remove(struct platform_device *plat_dev)
  89 {
  90         struct ixp2000_i2c_data *drv_data = platform_get_drvdata(plat_dev);
  91
  92         platform_set_drvdata(plat_dev, NULL);
  93
  94         i2c_del_adapter(&drv_data->adapter);
  95
  96         kfree(drv_data);
  97
  98         return 0;
  99 }
 100
 101 static int ixp2000_i2c_probe(struct platform_device *plat_dev)
 102 {
 103         int err;
 104         struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data;
 105         struct ixp2000_i2c_data *drv_data =
 106                 kzalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL);
 107
 108         if (!drv_data)
 109                 return -ENOMEM;
 110         drv_data->gpio_pins = gpio;
 111
 112         drv_data->algo_data.data = gpio;
 113         drv_data->algo_data.setsda = ixp2000_bit_setsda;
 114         drv_data->algo_data.setscl = ixp2000_bit_setscl;
 115         drv_data->algo_data.getsda = ixp2000_bit_getsda;
 116         drv_data->algo_data.getscl = ixp2000_bit_getscl;
 117         drv_data->algo_data.udelay = 6;
 118         drv_data->algo_data.timeout = HZ;
 119
 120         strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 121                 sizeof(drv_data->adapter.name));
 122         drv_data->adapter.algo_data = &drv_data->algo_data,
 123
 124         drv_data->adapter.dev.parent = &plat_dev->dev;
 125
 126         gpio_line_config(gpio->sda_pin, GPIO_IN);
 127         gpio_line_config(gpio->scl_pin, GPIO_IN);
 128         gpio_line_set(gpio->scl_pin, 0);
 129         gpio_line_set(gpio->sda_pin, 0);
 130
 131         if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
 132                 dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
 133                 kfree(drv_data);
 134                 return err;
 135         }
 136
 137         platform_set_drvdata(plat_dev, drv_data);
 138
 139         return 0;
 140 }
 141
 142 static struct platform_driver ixp2000_i2c_driver = {
 143         .probe          = ixp2000_i2c_probe,
 144         .remove         = ixp2000_i2c_remove,
 145         .driver         = {
 146                 .name   = "IXP2000-I2C",
 147                 .owner  = THIS_MODULE,
 148         },
 149 };
 150
 151 module_platform_driver(ixp2000_i2c_driver);
 152
 153 MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>");
 154 MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver");
 155 MODULE_LICENSE("GPL");
 156 MODULE_ALIAS("platform:IXP2000-I2C");
 157