spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / input / serio / sa1111ps2.c
blob44fc8b4bcd8157632b5e4bab9b8851dcac9e6523
1 /*
2 * linux/drivers/input/serio/sa1111ps2.c
4 * Copyright (C) 2002 Russell King
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License.
9 */
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/input.h>
13 #include <linux/serio.h>
14 #include <linux/errno.h>
15 #include <linux/interrupt.h>
16 #include <linux/ioport.h>
17 #include <linux/delay.h>
18 #include <linux/device.h>
19 #include <linux/slab.h>
20 #include <linux/spinlock.h>
22 #include <asm/io.h>
23 #include <asm/system.h>
25 #include <asm/hardware/sa1111.h>
27 struct ps2if {
28 struct serio *io;
29 struct sa1111_dev *dev;
30 void __iomem *base;
31 unsigned int open;
32 spinlock_t lock;
33 unsigned int head;
34 unsigned int tail;
35 unsigned char buf[4];
39 * Read all bytes waiting in the PS2 port. There should be
40 * at the most one, but we loop for safety. If there was a
41 * framing error, we have to manually clear the status.
43 static irqreturn_t ps2_rxint(int irq, void *dev_id)
45 struct ps2if *ps2if = dev_id;
46 unsigned int scancode, flag, status;
48 status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
49 while (status & PS2STAT_RXF) {
50 if (status & PS2STAT_STP)
51 sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT);
53 flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) |
54 (status & PS2STAT_RXP ? 0 : SERIO_PARITY);
56 scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff;
58 if (hweight8(scancode) & 1)
59 flag ^= SERIO_PARITY;
61 serio_interrupt(ps2if->io, scancode, flag);
63 status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
66 return IRQ_HANDLED;
70 * Completion of ps2 write
72 static irqreturn_t ps2_txint(int irq, void *dev_id)
74 struct ps2if *ps2if = dev_id;
75 unsigned int status;
77 spin_lock(&ps2if->lock);
78 status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
79 if (ps2if->head == ps2if->tail) {
80 disable_irq_nosync(irq);
81 /* done */
82 } else if (status & PS2STAT_TXE) {
83 sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
84 ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1);
86 spin_unlock(&ps2if->lock);
88 return IRQ_HANDLED;
92 * Write a byte to the PS2 port. We have to wait for the
93 * port to indicate that the transmitter is empty.
95 static int ps2_write(struct serio *io, unsigned char val)
97 struct ps2if *ps2if = io->port_data;
98 unsigned long flags;
99 unsigned int head;
101 spin_lock_irqsave(&ps2if->lock, flags);
104 * If the TX register is empty, we can go straight out.
106 if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) {
107 sa1111_writel(val, ps2if->base + SA1111_PS2DATA);
108 } else {
109 if (ps2if->head == ps2if->tail)
110 enable_irq(ps2if->dev->irq[1]);
111 head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1);
112 if (head != ps2if->tail) {
113 ps2if->buf[ps2if->head] = val;
114 ps2if->head = head;
118 spin_unlock_irqrestore(&ps2if->lock, flags);
119 return 0;
122 static int ps2_open(struct serio *io)
124 struct ps2if *ps2if = io->port_data;
125 int ret;
127 sa1111_enable_device(ps2if->dev);
129 ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0,
130 SA1111_DRIVER_NAME(ps2if->dev), ps2if);
131 if (ret) {
132 printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
133 ps2if->dev->irq[0], ret);
134 return ret;
137 ret = request_irq(ps2if->dev->irq[1], ps2_txint, 0,
138 SA1111_DRIVER_NAME(ps2if->dev), ps2if);
139 if (ret) {
140 printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
141 ps2if->dev->irq[1], ret);
142 free_irq(ps2if->dev->irq[0], ps2if);
143 return ret;
146 ps2if->open = 1;
148 enable_irq_wake(ps2if->dev->irq[0]);
150 sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR);
151 return 0;
154 static void ps2_close(struct serio *io)
156 struct ps2if *ps2if = io->port_data;
158 sa1111_writel(0, ps2if->base + SA1111_PS2CR);
160 disable_irq_wake(ps2if->dev->irq[0]);
162 ps2if->open = 0;
164 free_irq(ps2if->dev->irq[1], ps2if);
165 free_irq(ps2if->dev->irq[0], ps2if);
167 sa1111_disable_device(ps2if->dev);
171 * Clear the input buffer.
173 static void __devinit ps2_clear_input(struct ps2if *ps2if)
175 int maxread = 100;
177 while (maxread--) {
178 if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff)
179 break;
183 static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
184 unsigned int mask)
186 unsigned int val;
188 sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR);
190 udelay(2);
192 val = sa1111_readl(ps2if->base + SA1111_PS2STAT);
193 return val & (PS2STAT_KBC | PS2STAT_KBD);
197 * Test the keyboard interface. We basically check to make sure that
198 * we can drive each line to the keyboard independently of each other.
200 static int __devinit ps2_test(struct ps2if *ps2if)
202 unsigned int stat;
203 int ret = 0;
205 stat = ps2_test_one(ps2if, PS2CR_FKC);
206 if (stat != PS2STAT_KBD) {
207 printk("PS/2 interface test failed[1]: %02x\n", stat);
208 ret = -ENODEV;
211 stat = ps2_test_one(ps2if, 0);
212 if (stat != (PS2STAT_KBC | PS2STAT_KBD)) {
213 printk("PS/2 interface test failed[2]: %02x\n", stat);
214 ret = -ENODEV;
217 stat = ps2_test_one(ps2if, PS2CR_FKD);
218 if (stat != PS2STAT_KBC) {
219 printk("PS/2 interface test failed[3]: %02x\n", stat);
220 ret = -ENODEV;
223 sa1111_writel(0, ps2if->base + SA1111_PS2CR);
225 return ret;
229 * Add one device to this driver.
231 static int __devinit ps2_probe(struct sa1111_dev *dev)
233 struct ps2if *ps2if;
234 struct serio *serio;
235 int ret;
237 ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
238 serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
239 if (!ps2if || !serio) {
240 ret = -ENOMEM;
241 goto free;
245 serio->id.type = SERIO_8042;
246 serio->write = ps2_write;
247 serio->open = ps2_open;
248 serio->close = ps2_close;
249 strlcpy(serio->name, dev_name(&dev->dev), sizeof(serio->name));
250 strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
251 serio->port_data = ps2if;
252 serio->dev.parent = &dev->dev;
253 ps2if->io = serio;
254 ps2if->dev = dev;
255 sa1111_set_drvdata(dev, ps2if);
257 spin_lock_init(&ps2if->lock);
260 * Request the physical region for this PS2 port.
262 if (!request_mem_region(dev->res.start,
263 dev->res.end - dev->res.start + 1,
264 SA1111_DRIVER_NAME(dev))) {
265 ret = -EBUSY;
266 goto free;
270 * Our parent device has already mapped the region.
272 ps2if->base = dev->mapbase;
274 sa1111_enable_device(ps2if->dev);
276 /* Incoming clock is 8MHz */
277 sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV);
278 sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT);
281 * Flush any pending input.
283 ps2_clear_input(ps2if);
286 * Test the keyboard interface.
288 ret = ps2_test(ps2if);
289 if (ret)
290 goto out;
293 * Flush any pending input.
295 ps2_clear_input(ps2if);
297 sa1111_disable_device(ps2if->dev);
298 serio_register_port(ps2if->io);
299 return 0;
301 out:
302 sa1111_disable_device(ps2if->dev);
303 release_mem_region(dev->res.start, resource_size(&dev->res));
304 free:
305 sa1111_set_drvdata(dev, NULL);
306 kfree(ps2if);
307 kfree(serio);
308 return ret;
312 * Remove one device from this driver.
314 static int __devexit ps2_remove(struct sa1111_dev *dev)
316 struct ps2if *ps2if = sa1111_get_drvdata(dev);
318 serio_unregister_port(ps2if->io);
319 release_mem_region(dev->res.start, resource_size(&dev->res));
320 sa1111_set_drvdata(dev, NULL);
322 kfree(ps2if);
324 return 0;
328 * Our device driver structure
330 static struct sa1111_driver ps2_driver = {
331 .drv = {
332 .name = "sa1111-ps2",
334 .devid = SA1111_DEVID_PS2,
335 .probe = ps2_probe,
336 .remove = __devexit_p(ps2_remove),
339 static int __init ps2_init(void)
341 return sa1111_driver_register(&ps2_driver);
344 static void __exit ps2_exit(void)
346 sa1111_driver_unregister(&ps2_driver);
349 module_init(ps2_init);
350 module_exit(ps2_exit);
352 MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
353 MODULE_DESCRIPTION("SA1111 PS2 controller driver");
354 MODULE_LICENSE("GPL");