spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / mfd / da9052-spi.c
blob2693c87bc7f114e16baa73610ae84d10e34ff39a
1 /*
2 * SPI access for Dialog DA9052 PMICs.
4 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 * Author: David Dajun Chen <dchen@diasemi.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
15 #include <linux/device.h>
16 #include <linux/module.h>
17 #include <linux/input.h>
18 #include <linux/mfd/core.h>
19 #include <linux/spi/spi.h>
20 #include <linux/err.h>
22 #include <linux/mfd/da9052/da9052.h>
24 static int __devinit da9052_spi_probe(struct spi_device *spi)
26 int ret;
27 const struct spi_device_id *id = spi_get_device_id(spi);
28 struct da9052 *da9052 = kzalloc(sizeof(struct da9052), GFP_KERNEL);
30 if (!da9052)
31 return -ENOMEM;
33 spi->mode = SPI_MODE_0 | SPI_CPOL;
34 spi->bits_per_word = 8;
35 spi_setup(spi);
37 da9052->dev = &spi->dev;
38 da9052->chip_irq = spi->irq;
40 dev_set_drvdata(&spi->dev, da9052);
42 da9052_regmap_config.read_flag_mask = 1;
43 da9052_regmap_config.write_flag_mask = 0;
45 da9052->regmap = regmap_init_spi(spi, &da9052_regmap_config);
46 if (IS_ERR(da9052->regmap)) {
47 ret = PTR_ERR(da9052->regmap);
48 dev_err(&spi->dev, "Failed to allocate register map: %d\n",
49 ret);
50 goto err;
53 ret = da9052_device_init(da9052, id->driver_data);
54 if (ret != 0)
55 goto err;
57 return 0;
59 err:
60 kfree(da9052);
61 return ret;
64 static int __devexit da9052_spi_remove(struct spi_device *spi)
66 struct da9052 *da9052 = dev_get_drvdata(&spi->dev);
68 da9052_device_exit(da9052);
69 kfree(da9052);
71 return 0;
74 static struct spi_device_id da9052_spi_id[] = {
75 {"da9052", DA9052},
76 {"da9053-aa", DA9053_AA},
77 {"da9053-ba", DA9053_BA},
78 {"da9053-bb", DA9053_BB},
82 static struct spi_driver da9052_spi_driver = {
83 .probe = da9052_spi_probe,
84 .remove = __devexit_p(da9052_spi_remove),
85 .id_table = da9052_spi_id,
86 .driver = {
87 .name = "da9052",
88 .bus = &spi_bus_type,
89 .owner = THIS_MODULE,
93 static int __init da9052_spi_init(void)
95 int ret;
97 ret = spi_register_driver(&da9052_spi_driver);
98 if (ret != 0) {
99 pr_err("Failed to register DA9052 SPI driver, %d\n", ret);
100 return ret;
103 return 0;
105 subsys_initcall(da9052_spi_init);
107 static void __exit da9052_spi_exit(void)
109 spi_unregister_driver(&da9052_spi_driver);
111 module_exit(da9052_spi_exit);
113 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
114 MODULE_DESCRIPTION("SPI driver for Dialog DA9052 PMIC");
115 MODULE_LICENSE("GPL");