2 * linux/drivers/mmc/sdio_ops.c
4 * Copyright 2006-2007 Pierre Ossman
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or (at
9 * your option) any later version.
12 #include <linux/scatterlist.h>
14 #include <linux/mmc/host.h>
15 #include <linux/mmc/card.h>
16 #include <linux/mmc/mmc.h>
17 #include <linux/mmc/sdio.h>
22 int mmc_send_io_op_cond(struct mmc_host
*host
, u32 ocr
, u32
*rocr
)
24 struct mmc_command cmd
= {0};
29 cmd
.opcode
= SD_IO_SEND_OP_COND
;
31 cmd
.flags
= MMC_RSP_SPI_R4
| MMC_RSP_R4
| MMC_CMD_BCR
;
33 for (i
= 100; i
; i
--) {
34 err
= mmc_wait_for_cmd(host
, &cmd
, MMC_CMD_RETRIES
);
38 /* if we're just probing, do a single pass */
42 /* otherwise wait until reset completes */
43 if (mmc_host_is_spi(host
)) {
45 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
46 * an initialized card under SPI, but some cards
47 * (Marvell's) only behave when looking at this
50 if (cmd
.resp
[1] & MMC_CARD_BUSY
)
53 if (cmd
.resp
[0] & MMC_CARD_BUSY
)
63 *rocr
= cmd
.resp
[mmc_host_is_spi(host
) ? 1 : 0];
68 static int mmc_io_rw_direct_host(struct mmc_host
*host
, int write
, unsigned fn
,
69 unsigned addr
, u8 in
, u8
*out
)
71 struct mmc_command cmd
= {0};
81 cmd
.opcode
= SD_IO_RW_DIRECT
;
82 cmd
.arg
= write
? 0x80000000 : 0x00000000;
84 cmd
.arg
|= (write
&& out
) ? 0x08000000 : 0x00000000;
87 cmd
.flags
= MMC_RSP_SPI_R5
| MMC_RSP_R5
| MMC_CMD_AC
;
89 err
= mmc_wait_for_cmd(host
, &cmd
, 0);
93 if (mmc_host_is_spi(host
)) {
94 /* host driver already reported errors */
96 if (cmd
.resp
[0] & R5_ERROR
)
98 if (cmd
.resp
[0] & R5_FUNCTION_NUMBER
)
100 if (cmd
.resp
[0] & R5_OUT_OF_RANGE
)
105 if (mmc_host_is_spi(host
))
106 *out
= (cmd
.resp
[0] >> 8) & 0xFF;
108 *out
= cmd
.resp
[0] & 0xFF;
114 int mmc_io_rw_direct(struct mmc_card
*card
, int write
, unsigned fn
,
115 unsigned addr
, u8 in
, u8
*out
)
118 return mmc_io_rw_direct_host(card
->host
, write
, fn
, addr
, in
, out
);
121 int mmc_io_rw_extended(struct mmc_card
*card
, int write
, unsigned fn
,
122 unsigned addr
, int incr_addr
, u8
*buf
, unsigned blocks
, unsigned blksz
)
124 struct mmc_request mrq
= {NULL
};
125 struct mmc_command cmd
= {0};
126 struct mmc_data data
= {0};
127 struct scatterlist sg
;
140 cmd
.opcode
= SD_IO_RW_EXTENDED
;
141 cmd
.arg
= write
? 0x80000000 : 0x00000000;
143 cmd
.arg
|= incr_addr
? 0x04000000 : 0x00000000;
144 cmd
.arg
|= addr
<< 9;
146 cmd
.arg
|= (blksz
== 512) ? 0 : blksz
; /* byte mode */
148 cmd
.arg
|= 0x08000000 | blocks
; /* block mode */
149 cmd
.flags
= MMC_RSP_SPI_R5
| MMC_RSP_R5
| MMC_CMD_ADTC
;
152 /* Code in host drivers/fwk assumes that "blocks" always is >=1 */
153 data
.blocks
= blocks
? blocks
: 1;
154 data
.flags
= write
? MMC_DATA_WRITE
: MMC_DATA_READ
;
158 sg_init_one(&sg
, buf
, data
.blksz
* data
.blocks
);
160 mmc_set_data_timeout(&data
, card
);
162 mmc_wait_for_req(card
->host
, &mrq
);
169 if (mmc_host_is_spi(card
->host
)) {
170 /* host driver already reported errors */
172 if (cmd
.resp
[0] & R5_ERROR
)
174 if (cmd
.resp
[0] & R5_FUNCTION_NUMBER
)
176 if (cmd
.resp
[0] & R5_OUT_OF_RANGE
)
183 int sdio_reset(struct mmc_host
*host
)
188 /* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
190 ret
= mmc_io_rw_direct_host(host
, 0, 0, SDIO_CCCR_ABORT
, 0, &abort
);
196 ret
= mmc_io_rw_direct_host(host
, 1, 0, SDIO_CCCR_ABORT
, abort
, NULL
);