2 * Sun3 i82586 Ethernet driver
4 * Cloned from ni52.c for the Sun3 by Sam Creasey (sammy@sammy.net)
6 * Original copyright follows:
7 * --------------------------
9 * net-3-driver for the NI5210 card (i82586 Ethernet chip)
11 * This is an extension to the Linux operating system, and is covered by the
12 * same Gnu Public License that covers that work.
14 * Alphacode 0.82 (96/09/29) for Linux 2.0.0 (or later)
15 * Copyrights (c) 1994,1995,1996 by M.Hipp (hippm@informatik.uni-tuebingen.de)
16 * --------------------------
18 * Consult ni52.c for further notes from the original driver.
20 * This incarnation currently supports the OBIO version of the i82586 chip
21 * used in certain sun3 models. It should be fairly doable to expand this
22 * to support VME if I should every acquire such a board.
26 static int debuglevel
= 0; /* debug-printk 0: off 1: a few 2: more */
27 static int automatic_resume
= 0; /* experimental .. better should be zero */
28 static int rfdadd
= 0; /* rfdadd=1 may be better for 8K MEM cards */
29 static int fifo
=0x8; /* don't change */
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/string.h>
34 #include <linux/errno.h>
35 #include <linux/ioport.h>
36 #include <linux/interrupt.h>
37 #include <linux/delay.h>
38 #include <linux/init.h>
39 #include <linux/bitops.h>
41 #include <asm/idprom.h>
42 #include <asm/machines.h>
43 #include <asm/sun3mmu.h>
45 #include <asm/byteorder.h>
47 #include <linux/netdevice.h>
48 #include <linux/etherdevice.h>
49 #include <linux/skbuff.h>
51 #include "sun3_82586.h"
53 #define DRV_NAME "sun3_82586"
55 #define DEBUG /* debug on */
56 #define SYSBUSVAL 0 /* 16 Bit */
57 #define SUN3_82586_TOTAL_SIZE PAGE_SIZE
59 #define sun3_attn586() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_ATTEN; *(volatile unsigned char *)(dev->base_addr) &= ~IEOB_ATTEN;}
60 #define sun3_reset586() {*(volatile unsigned char *)(dev->base_addr) = 0; udelay(100); *(volatile unsigned char *)(dev->base_addr) = IEOB_NORSET;}
61 #define sun3_disint() {*(volatile unsigned char *)(dev->base_addr) &= ~IEOB_IENAB;}
62 #define sun3_enaint() {*(volatile unsigned char *)(dev->base_addr) |= IEOB_IENAB;}
63 #define sun3_active() {*(volatile unsigned char *)(dev->base_addr) |= (IEOB_IENAB|IEOB_ONAIR|IEOB_NORSET);}
65 #define make32(ptr16) (p->memtop + (swab16((unsigned short) (ptr16))) )
66 #define make24(ptr32) (char *)swab32(( ((unsigned long) (ptr32)) - p->base))
67 #define make16(ptr32) (swab16((unsigned short) ((unsigned long)(ptr32) - (unsigned long) p->memtop )))
69 /******************* how to calculate the buffers *****************************
71 * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
72 * --------------- in a different (more stable?) mode. Only in this mode it's
73 * possible to configure the driver with 'NO_NOPCOMMANDS'
75 sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
76 sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
77 sizeof(rfd) = 24; sizeof(rbd) = 12;
78 sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
81 * if you don't know the driver, better do not change these values: */
83 #define RECV_BUFF_SIZE 1536 /* slightly oversized */
84 #define XMIT_BUFF_SIZE 1536 /* slightly oversized */
85 #define NUM_XMIT_BUFFS 1 /* config for 32K shmem */
86 #define NUM_RECV_BUFFS_8 4 /* config for 32K shared mem */
87 #define NUM_RECV_BUFFS_16 9 /* config for 32K shared mem */
88 #define NUM_RECV_BUFFS_32 16 /* config for 32K shared mem */
89 #define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
91 /**************************************************************************/
93 /* different DELAYs */
94 #define DELAY(x) mdelay(32 * x);
95 #define DELAY_16(); { udelay(16); }
96 #define DELAY_18(); { udelay(4); }
98 /* wait for command with timeout: */
99 #define WAIT_4_SCB_CMD() \
101 for(i=0;i<16384;i++) { \
102 if(!p->scb->cmd_cuc) break; \
105 printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \
106 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
108 #define WAIT_4_SCB_CMD_RUC() { int i; \
109 for(i=0;i<16384;i++) { \
110 if(!p->scb->cmd_ruc) break; \
113 printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \
114 if(!p->reseted) { p->reseted = 1; sun3_reset586(); } } } }
116 #define WAIT_4_STAT_COMPL(addr) { int i; \
117 for(i=0;i<32767;i++) { \
118 if(swab16((addr)->cmd_status) & STAT_COMPL) break; \
119 DELAY_16(); DELAY_16(); } }
121 static int sun3_82586_probe1(struct net_device
*dev
,int ioaddr
);
122 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
);
123 static int sun3_82586_open(struct net_device
*dev
);
124 static int sun3_82586_close(struct net_device
*dev
);
125 static int sun3_82586_send_packet(struct sk_buff
*,struct net_device
*);
126 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
);
127 static void set_multicast_list(struct net_device
*dev
);
128 static void sun3_82586_timeout(struct net_device
*dev
);
130 static void sun3_82586_dump(struct net_device
*,void *);
133 /* helper-functions */
134 static int init586(struct net_device
*dev
);
135 static int check586(struct net_device
*dev
,char *where
,unsigned size
);
136 static void alloc586(struct net_device
*dev
);
137 static void startrecv586(struct net_device
*dev
);
138 static void *alloc_rfa(struct net_device
*dev
,void *ptr
);
139 static void sun3_82586_rcv_int(struct net_device
*dev
);
140 static void sun3_82586_xmt_int(struct net_device
*dev
);
141 static void sun3_82586_rnr_int(struct net_device
*dev
);
149 volatile struct rfd_struct
*rfd_last
,*rfd_top
,*rfd_first
;
150 volatile struct scp_struct
*scp
; /* volatile is important */
151 volatile struct iscp_struct
*iscp
; /* volatile is important */
152 volatile struct scb_struct
*scb
; /* volatile is important */
153 volatile struct tbd_struct
*xmit_buffs
[NUM_XMIT_BUFFS
];
154 volatile struct transmit_cmd_struct
*xmit_cmds
[NUM_XMIT_BUFFS
];
155 #if (NUM_XMIT_BUFFS == 1)
156 volatile struct nop_cmd_struct
*nop_cmds
[2];
158 volatile struct nop_cmd_struct
*nop_cmds
[NUM_XMIT_BUFFS
];
160 volatile int nop_point
,num_recv_buffs
;
161 volatile char *xmit_cbuffs
[NUM_XMIT_BUFFS
];
162 volatile int xmit_count
,xmit_last
;
165 /**********************************************
168 static int sun3_82586_close(struct net_device
*dev
)
170 free_irq(dev
->irq
, dev
);
172 sun3_reset586(); /* the hard way to stop the receiver */
174 netif_stop_queue(dev
);
179 /**********************************************
182 static int sun3_82586_open(struct net_device
*dev
)
192 ret
= request_irq(dev
->irq
, sun3_82586_interrupt
,0,dev
->name
,dev
);
199 netif_start_queue(dev
);
201 return 0; /* most done by init */
204 /**********************************************
205 * Check to see if there's an 82586 out there.
207 static int check586(struct net_device
*dev
,char *where
,unsigned size
)
210 struct priv
*p
= &pb
;
214 p
->base
= (unsigned long) dvma_btov(0);
215 p
->memtop
= (char *)dvma_btov((unsigned long)where
);
216 p
->scp
= (struct scp_struct
*)(p
->base
+ SCP_DEFAULT_ADDRESS
);
217 memset((char *)p
->scp
,0, sizeof(struct scp_struct
));
218 for(i
=0;i
<sizeof(struct scp_struct
);i
++) /* memory was writeable? */
219 if(((char *)p
->scp
)[i
])
221 p
->scp
->sysbus
= SYSBUSVAL
; /* 1 = 8Bit-Bus, 0 = 16 Bit */
222 if(p
->scp
->sysbus
!= SYSBUSVAL
)
225 iscp_addr
= (char *)dvma_btov((unsigned long)where
);
227 p
->iscp
= (struct iscp_struct
*) iscp_addr
;
228 memset((char *)p
->iscp
,0, sizeof(struct iscp_struct
));
230 p
->scp
->iscp
= make24(p
->iscp
);
235 DELAY(1); /* wait a while... */
237 if(p
->iscp
->busy
) /* i82586 clears 'busy' after successful init */
243 /******************************************************************
244 * set iscp at the right place, called by sun3_82586_probe1 and open586.
246 static void alloc586(struct net_device
*dev
)
248 struct priv
*p
= netdev_priv(dev
);
253 p
->scp
= (struct scp_struct
*) (p
->base
+ SCP_DEFAULT_ADDRESS
);
254 p
->iscp
= (struct iscp_struct
*) dvma_btov(dev
->mem_start
);
255 p
->scb
= (struct scb_struct
*) ((char *)p
->iscp
+ sizeof(struct iscp_struct
));
257 memset((char *) p
->iscp
,0,sizeof(struct iscp_struct
));
258 memset((char *) p
->scp
,0,sizeof(struct scp_struct
));
260 p
->scp
->iscp
= make24(p
->iscp
);
261 p
->scp
->sysbus
= SYSBUSVAL
;
262 p
->iscp
->scb_offset
= make16(p
->scb
);
263 p
->iscp
->scb_base
= make24(dvma_btov(dev
->mem_start
));
272 printk("%s: Init-Problems (alloc).\n",dev
->name
);
276 memset((char *)p
->scb
,0,sizeof(struct scb_struct
));
279 struct net_device
* __init
sun3_82586_probe(int unit
)
281 struct net_device
*dev
;
282 unsigned long ioaddr
;
283 static int found
= 0;
286 /* check that this machine has an onboard 82586 */
287 switch(idprom
->id_machtype
) {
288 case SM_SUN3
|SM_3_160
:
289 case SM_SUN3
|SM_3_260
:
290 /* these machines have 82586 */
294 return ERR_PTR(-ENODEV
);
298 return ERR_PTR(-ENODEV
);
300 ioaddr
= (unsigned long)ioremap(IE_OBIO
, SUN3_82586_TOTAL_SIZE
);
302 return ERR_PTR(-ENOMEM
);
305 dev
= alloc_etherdev(sizeof(struct priv
));
309 sprintf(dev
->name
, "eth%d", unit
);
310 netdev_boot_setup_check(dev
);
314 dev
->base_addr
= ioaddr
;
315 err
= sun3_82586_probe1(dev
, ioaddr
);
318 err
= register_netdev(dev
);
324 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
328 iounmap((void __iomem
*)ioaddr
);
332 static const struct net_device_ops sun3_82586_netdev_ops
= {
333 .ndo_open
= sun3_82586_open
,
334 .ndo_stop
= sun3_82586_close
,
335 .ndo_start_xmit
= sun3_82586_send_packet
,
336 .ndo_set_rx_mode
= set_multicast_list
,
337 .ndo_tx_timeout
= sun3_82586_timeout
,
338 .ndo_get_stats
= sun3_82586_get_stats
,
339 .ndo_validate_addr
= eth_validate_addr
,
340 .ndo_set_mac_address
= eth_mac_addr
,
341 .ndo_change_mtu
= eth_change_mtu
,
344 static int __init
sun3_82586_probe1(struct net_device
*dev
,int ioaddr
)
348 if (!request_region(ioaddr
, SUN3_82586_TOTAL_SIZE
, DRV_NAME
))
351 /* copy in the ethernet address from the prom */
352 for(i
= 0; i
< 6 ; i
++)
353 dev
->dev_addr
[i
] = idprom
->id_ethaddr
[i
];
355 printk("%s: SUN3 Intel 82586 found at %lx, ",dev
->name
,dev
->base_addr
);
358 * check (or search) IO-Memory, 32K
362 dev
->mem_start
= (unsigned long)dvma_malloc_align(0x8000, 0x1000);
363 dev
->mem_end
= dev
->mem_start
+ size
;
365 if(size
!= 0x2000 && size
!= 0x4000 && size
!= 0x8000) {
366 printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev
->name
,size
);
370 if(!check586(dev
,(char *) dev
->mem_start
,size
)) {
371 printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev
->mem_start
,size
);
376 ((struct priv
*)netdev_priv(dev
))->memtop
=
377 (char *)dvma_btov(dev
->mem_start
);
378 ((struct priv
*)netdev_priv(dev
))->base
= (unsigned long) dvma_btov(0);
381 /* set number of receive-buffs according to memsize */
383 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
385 else if(size
== 0x4000)
386 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
389 ((struct priv
*)netdev_priv(dev
))->num_recv_buffs
=
392 printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev
->mem_start
,size
, dev
->irq
);
394 dev
->netdev_ops
= &sun3_82586_netdev_ops
;
395 dev
->watchdog_timeo
= HZ
/20;
400 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
405 static int init586(struct net_device
*dev
)
409 struct priv
*p
= netdev_priv(dev
);
410 volatile struct configure_cmd_struct
*cfg_cmd
;
411 volatile struct iasetup_cmd_struct
*ias_cmd
;
412 volatile struct tdr_cmd_struct
*tdr_cmd
;
413 volatile struct mcsetup_cmd_struct
*mc_cmd
;
414 struct netdev_hw_addr
*ha
;
415 int num_addrs
=netdev_mc_count(dev
);
417 ptr
= (void *) ((char *)p
->scb
+ sizeof(struct scb_struct
));
419 cfg_cmd
= (struct configure_cmd_struct
*)ptr
; /* configure-command */
420 cfg_cmd
->cmd_status
= 0;
421 cfg_cmd
->cmd_cmd
= swab16(CMD_CONFIGURE
| CMD_LAST
);
422 cfg_cmd
->cmd_link
= 0xffff;
424 cfg_cmd
->byte_cnt
= 0x0a; /* number of cfg bytes */
425 cfg_cmd
->fifo
= fifo
; /* fifo-limit (8=tx:32/rx:64) */
426 cfg_cmd
->sav_bf
= 0x40; /* hold or discard bad recv frames (bit 7) */
427 cfg_cmd
->adr_len
= 0x2e; /* addr_len |!src_insert |pre-len |loopback */
428 cfg_cmd
->priority
= 0x00;
430 cfg_cmd
->time_low
= 0x00;
431 cfg_cmd
->time_high
= 0xf2;
432 cfg_cmd
->promisc
= 0;
433 if(dev
->flags
& IFF_ALLMULTI
) {
434 int len
= ((char *) p
->iscp
- (char *) ptr
- 8) / 6;
435 if(num_addrs
> len
) {
436 printk("%s: switching to promisc. mode\n",dev
->name
);
437 cfg_cmd
->promisc
= 1;
440 if(dev
->flags
&IFF_PROMISC
)
441 cfg_cmd
->promisc
= 1;
442 cfg_cmd
->carr_coll
= 0x00;
444 p
->scb
->cbl_offset
= make16(cfg_cmd
);
447 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
450 WAIT_4_STAT_COMPL(cfg_cmd
);
452 if((swab16(cfg_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_COMPL
|STAT_OK
))
454 printk("%s: configure command failed: %x\n",dev
->name
,swab16(cfg_cmd
->cmd_status
));
459 * individual address setup
462 ias_cmd
= (struct iasetup_cmd_struct
*)ptr
;
464 ias_cmd
->cmd_status
= 0;
465 ias_cmd
->cmd_cmd
= swab16(CMD_IASETUP
| CMD_LAST
);
466 ias_cmd
->cmd_link
= 0xffff;
468 memcpy((char *)&ias_cmd
->iaddr
,(char *) dev
->dev_addr
,ETH_ALEN
);
470 p
->scb
->cbl_offset
= make16(ias_cmd
);
472 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
475 WAIT_4_STAT_COMPL(ias_cmd
);
477 if((swab16(ias_cmd
->cmd_status
) & (STAT_OK
|STAT_COMPL
)) != (STAT_OK
|STAT_COMPL
)) {
478 printk("%s (82586): individual address setup command failed: %04x\n",dev
->name
,swab16(ias_cmd
->cmd_status
));
483 * TDR, wire check .. e.g. no resistor e.t.c
486 tdr_cmd
= (struct tdr_cmd_struct
*)ptr
;
488 tdr_cmd
->cmd_status
= 0;
489 tdr_cmd
->cmd_cmd
= swab16(CMD_TDR
| CMD_LAST
);
490 tdr_cmd
->cmd_link
= 0xffff;
493 p
->scb
->cbl_offset
= make16(tdr_cmd
);
494 p
->scb
->cmd_cuc
= CUC_START
; /* cmd.-unit start */
497 WAIT_4_STAT_COMPL(tdr_cmd
);
499 if(!(swab16(tdr_cmd
->cmd_status
) & STAT_COMPL
))
501 printk("%s: Problems while running the TDR.\n",dev
->name
);
505 DELAY_16(); /* wait for result */
506 result
= swab16(tdr_cmd
->status
);
508 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
509 sun3_attn586(); /* ack the interrupts */
511 if(result
& TDR_LNK_OK
)
513 else if(result
& TDR_XCVR_PRB
)
514 printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev
->name
);
515 else if(result
& TDR_ET_OPN
)
516 printk("%s: TDR: No correct termination %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
517 else if(result
& TDR_ET_SRT
)
519 if (result
& TDR_TIMEMASK
) /* time == 0 -> strange :-) */
520 printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev
->name
,result
& TDR_TIMEMASK
);
523 printk("%s: TDR: Unknown status %04x\n",dev
->name
,result
);
529 if(num_addrs
&& !(dev
->flags
& IFF_PROMISC
) )
531 mc_cmd
= (struct mcsetup_cmd_struct
*) ptr
;
532 mc_cmd
->cmd_status
= 0;
533 mc_cmd
->cmd_cmd
= swab16(CMD_MCSETUP
| CMD_LAST
);
534 mc_cmd
->cmd_link
= 0xffff;
535 mc_cmd
->mc_cnt
= swab16(num_addrs
* 6);
538 netdev_for_each_mc_addr(ha
, dev
)
539 memcpy((char *) mc_cmd
->mc_list
[i
++],
542 p
->scb
->cbl_offset
= make16(mc_cmd
);
543 p
->scb
->cmd_cuc
= CUC_START
;
546 WAIT_4_STAT_COMPL(mc_cmd
);
548 if( (swab16(mc_cmd
->cmd_status
) & (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
549 printk("%s: Can't apply multicast-address-list.\n",dev
->name
);
553 * alloc nop/xmit-cmds
555 #if (NUM_XMIT_BUFFS == 1)
558 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
559 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
560 p
->nop_cmds
[i
]->cmd_status
= 0;
561 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
562 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
565 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
567 p
->nop_cmds
[i
] = (struct nop_cmd_struct
*)ptr
;
568 p
->nop_cmds
[i
]->cmd_cmd
= swab16(CMD_NOP
);
569 p
->nop_cmds
[i
]->cmd_status
= 0;
570 p
->nop_cmds
[i
]->cmd_link
= make16((p
->nop_cmds
[i
]));
571 ptr
= (char *) ptr
+ sizeof(struct nop_cmd_struct
);
575 ptr
= alloc_rfa(dev
,(void *)ptr
); /* init receive-frame-area */
578 * alloc xmit-buffs / init xmit_cmds
580 for(i
=0;i
<NUM_XMIT_BUFFS
;i
++)
582 p
->xmit_cmds
[i
] = (struct transmit_cmd_struct
*)ptr
; /*transmit cmd/buff 0*/
583 ptr
= (char *) ptr
+ sizeof(struct transmit_cmd_struct
);
584 p
->xmit_cbuffs
[i
] = (char *)ptr
; /* char-buffs */
585 ptr
= (char *) ptr
+ XMIT_BUFF_SIZE
;
586 p
->xmit_buffs
[i
] = (struct tbd_struct
*)ptr
; /* TBD */
587 ptr
= (char *) ptr
+ sizeof(struct tbd_struct
);
588 if((void *)ptr
> (void *)dev
->mem_end
)
590 printk("%s: not enough shared-mem for your configuration!\n",dev
->name
);
593 memset((char *)(p
->xmit_cmds
[i
]) ,0, sizeof(struct transmit_cmd_struct
));
594 memset((char *)(p
->xmit_buffs
[i
]),0, sizeof(struct tbd_struct
));
595 p
->xmit_cmds
[i
]->cmd_link
= make16(p
->nop_cmds
[(i
+1)%NUM_XMIT_BUFFS
]);
596 p
->xmit_cmds
[i
]->cmd_status
= swab16(STAT_COMPL
);
597 p
->xmit_cmds
[i
]->cmd_cmd
= swab16(CMD_XMIT
| CMD_INT
);
598 p
->xmit_cmds
[i
]->tbd_offset
= make16((p
->xmit_buffs
[i
]));
599 p
->xmit_buffs
[i
]->next
= 0xffff;
600 p
->xmit_buffs
[i
]->buffer
= make24((p
->xmit_cbuffs
[i
]));
605 #ifndef NO_NOPCOMMANDS
610 * 'start transmitter'
612 #ifndef NO_NOPCOMMANDS
613 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[0]);
614 p
->scb
->cmd_cuc
= CUC_START
;
618 p
->xmit_cmds
[0]->cmd_link
= make16(p
->xmit_cmds
[0]);
619 p
->xmit_cmds
[0]->cmd_cmd
= swab16(CMD_XMIT
| CMD_SUSPEND
| CMD_INT
);
625 p
->scb
->cmd_cuc
= p
->scb
->cus
& STAT_MASK
;
635 /******************************************************
636 * This is a helper routine for sun3_82586_rnr_int() and init586().
637 * It sets up the Receive Frame Area (RFA).
640 static void *alloc_rfa(struct net_device
*dev
,void *ptr
)
642 volatile struct rfd_struct
*rfd
= (struct rfd_struct
*)ptr
;
643 volatile struct rbd_struct
*rbd
;
645 struct priv
*p
= netdev_priv(dev
);
647 memset((char *) rfd
,0,sizeof(struct rfd_struct
)*(p
->num_recv_buffs
+rfdadd
));
650 for(i
= 0; i
< (p
->num_recv_buffs
+rfdadd
); i
++) {
651 rfd
[i
].next
= make16(rfd
+ (i
+1) % (p
->num_recv_buffs
+rfdadd
) );
652 rfd
[i
].rbd_offset
= 0xffff;
654 rfd
[p
->num_recv_buffs
-1+rfdadd
].last
= RFD_SUSP
; /* RU suspend */
656 ptr
= (void *) (rfd
+ (p
->num_recv_buffs
+ rfdadd
) );
658 rbd
= (struct rbd_struct
*) ptr
;
659 ptr
= (void *) (rbd
+ p
->num_recv_buffs
);
661 /* clr descriptors */
662 memset((char *) rbd
,0,sizeof(struct rbd_struct
)*(p
->num_recv_buffs
));
664 for(i
=0;i
<p
->num_recv_buffs
;i
++)
666 rbd
[i
].next
= make16((rbd
+ (i
+1) % p
->num_recv_buffs
));
667 rbd
[i
].size
= swab16(RECV_BUFF_SIZE
);
668 rbd
[i
].buffer
= make24(ptr
);
669 ptr
= (char *) ptr
+ RECV_BUFF_SIZE
;
672 p
->rfd_top
= p
->rfd_first
;
673 p
->rfd_last
= p
->rfd_first
+ (p
->num_recv_buffs
- 1 + rfdadd
);
675 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
676 p
->rfd_first
->rbd_offset
= make16(rbd
);
682 /**************************************************
683 * Interrupt Handler ...
686 static irqreturn_t
sun3_82586_interrupt(int irq
,void *dev_id
)
688 struct net_device
*dev
= dev_id
;
694 printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq
);
697 p
= netdev_priv(dev
);
702 WAIT_4_SCB_CMD(); /* wait for last command */
704 while((stat
=p
->scb
->cus
& STAT_MASK
))
706 p
->scb
->cmd_cuc
= stat
;
709 if(stat
& STAT_FR
) /* received a frame */
710 sun3_82586_rcv_int(dev
);
712 if(stat
& STAT_RNR
) /* RU went 'not ready' */
715 if(p
->scb
->rus
& RU_SUSPEND
) /* special case: RU_SUSPEND */
718 p
->scb
->cmd_ruc
= RUC_RESUME
;
720 WAIT_4_SCB_CMD_RUC();
724 printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->rus
);
725 sun3_82586_rnr_int(dev
);
729 if(stat
& STAT_CX
) /* command with I-bit set complete */
730 sun3_82586_xmt_int(dev
);
732 #ifndef NO_NOPCOMMANDS
733 if(stat
& STAT_CNA
) /* CU went 'not ready' */
735 if(netif_running(dev
))
736 printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev
->name
,(int) stat
,(int) p
->scb
->cus
);
743 WAIT_4_SCB_CMD(); /* wait for ack. (sun3_82586_xmt_int can be faster than ack!!) */
744 if(p
->scb
->cmd_cuc
) /* timed out? */
746 printk("%s: Acknowledge timed out.\n",dev
->name
);
757 /*******************************************************
761 static void sun3_82586_rcv_int(struct net_device
*dev
)
764 unsigned short totlen
;
766 struct rbd_struct
*rbd
;
767 struct priv
*p
= netdev_priv(dev
);
772 for(;(status
= p
->rfd_top
->stat_high
) & RFD_COMPL
;)
774 rbd
= (struct rbd_struct
*) make32(p
->rfd_top
->rbd_offset
);
776 if(status
& RFD_OK
) /* frame received without error? */
778 if( (totlen
= swab16(rbd
->status
)) & RBD_LAST
) /* the first and the last buffer? */
780 totlen
&= RBD_MASK
; /* length of this frame */
782 skb
= (struct sk_buff
*) dev_alloc_skb(totlen
+2);
787 skb_copy_to_linear_data(skb
,(char *) p
->base
+swab32((unsigned long) rbd
->buffer
),totlen
);
788 skb
->protocol
=eth_type_trans(skb
,dev
);
790 dev
->stats
.rx_packets
++;
793 dev
->stats
.rx_dropped
++;
798 /* free all RBD's until RBD_LAST is set */
800 while(!((rstat
=swab16(rbd
->status
)) & RBD_LAST
))
802 totlen
+= rstat
& RBD_MASK
;
805 printk("%s: Whoops .. no end mark in RBD list\n",dev
->name
);
809 rbd
= (struct rbd_struct
*) make32(rbd
->next
);
811 totlen
+= rstat
& RBD_MASK
;
813 printk("%s: received oversized frame! length: %d\n",dev
->name
,totlen
);
814 dev
->stats
.rx_dropped
++;
817 else /* frame !(ok), only with 'save-bad-frames' */
819 printk("%s: oops! rfd-error-status: %04x\n",dev
->name
,status
);
820 dev
->stats
.rx_errors
++;
822 p
->rfd_top
->stat_high
= 0;
823 p
->rfd_top
->last
= RFD_SUSP
; /* maybe exchange by RFD_LAST */
824 p
->rfd_top
->rbd_offset
= 0xffff;
825 p
->rfd_last
->last
= 0; /* delete RFD_SUSP */
826 p
->rfd_last
= p
->rfd_top
;
827 p
->rfd_top
= (struct rfd_struct
*) make32(p
->rfd_top
->next
); /* step to next RFD */
828 p
->scb
->rfa_offset
= make16(p
->rfd_top
);
837 p
->scb
->cmd_ruc
= RUC_RESUME
;
839 WAIT_4_SCB_CMD_RUC();
847 if(p
->rfd_top
->status
)
851 printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev
->name
);
860 volatile struct rfd_struct
*rfds
=p
->rfd_top
;
861 volatile struct rbd_struct
*rbds
;
862 printk("%s: received a FC intr. without having a frame: %04x %d\n",dev
->name
,status
,old_at_least
);
863 for(i
=0;i
< (p
->num_recv_buffs
+4);i
++)
865 rbds
= (struct rbd_struct
*) make32(rfds
->rbd_offset
);
866 printk("%04x:%04x ",rfds
->status
,rbds
->status
);
867 rfds
= (struct rfd_struct
*) make32(rfds
->next
);
869 printk("\nerrs: %04x %04x stat: %04x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->status
);
870 printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p
->scb
->rsc_errs
,(int)p
->scb
->ovrn_errs
,(int)p
->scb
->rus
,(int)p
->scb
->cus
);
872 old_at_least
= at_least_one
;
879 /**********************************************************
880 * handle 'Receiver went not ready'.
883 static void sun3_82586_rnr_int(struct net_device
*dev
)
885 struct priv
*p
= netdev_priv(dev
);
887 dev
->stats
.rx_errors
++;
889 WAIT_4_SCB_CMD(); /* wait for the last cmd, WAIT_4_FULLSTAT?? */
890 p
->scb
->cmd_ruc
= RUC_ABORT
; /* usually the RU is in the 'no resource'-state .. abort it now. */
892 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. */
894 alloc_rfa(dev
,(char *)p
->rfd_first
);
895 /* maybe add a check here, before restarting the RU */
896 startrecv586(dev
); /* restart RU */
898 printk("%s: Receive-Unit restarted. Status: %04x\n",dev
->name
,p
->scb
->rus
);
902 /**********************************************************
903 * handle xmit - interrupt
906 static void sun3_82586_xmt_int(struct net_device
*dev
)
909 struct priv
*p
= netdev_priv(dev
);
914 status
= swab16(p
->xmit_cmds
[p
->xmit_last
]->cmd_status
);
915 if(!(status
& STAT_COMPL
))
916 printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev
->name
);
920 dev
->stats
.tx_packets
++;
921 dev
->stats
.collisions
+= (status
& TCMD_MAXCOLLMASK
);
925 dev
->stats
.tx_errors
++;
926 if(status
& TCMD_LATECOLL
) {
927 printk("%s: late collision detected.\n",dev
->name
);
928 dev
->stats
.collisions
++;
930 else if(status
& TCMD_NOCARRIER
) {
931 dev
->stats
.tx_carrier_errors
++;
932 printk("%s: no carrier detected.\n",dev
->name
);
934 else if(status
& TCMD_LOSTCTS
)
935 printk("%s: loss of CTS detected.\n",dev
->name
);
936 else if(status
& TCMD_UNDERRUN
) {
937 dev
->stats
.tx_fifo_errors
++;
938 printk("%s: DMA underrun detected.\n",dev
->name
);
940 else if(status
& TCMD_MAXCOLL
) {
941 printk("%s: Max. collisions exceeded.\n",dev
->name
);
942 dev
->stats
.collisions
+= 16;
946 #if (NUM_XMIT_BUFFS > 1)
947 if( (++p
->xmit_last
) == NUM_XMIT_BUFFS
)
950 netif_wake_queue(dev
);
953 /***********************************************************
954 * (re)start the receiver
957 static void startrecv586(struct net_device
*dev
)
959 struct priv
*p
= netdev_priv(dev
);
962 WAIT_4_SCB_CMD_RUC();
963 p
->scb
->rfa_offset
= make16(p
->rfd_first
);
964 p
->scb
->cmd_ruc
= RUC_START
;
965 sun3_attn586(); /* start cmd. */
966 WAIT_4_SCB_CMD_RUC(); /* wait for accept cmd. (no timeout!!) */
969 static void sun3_82586_timeout(struct net_device
*dev
)
971 struct priv
*p
= netdev_priv(dev
);
972 #ifndef NO_NOPCOMMANDS
973 if(p
->scb
->cus
& CU_ACTIVE
) /* COMMAND-UNIT active? */
975 netif_wake_queue(dev
);
977 printk("%s: strange ... timeout with CU active?!?\n",dev
->name
);
978 printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev
->name
,(int)swab16(p
->xmit_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[0]->cmd_status
),(int)swab16(p
->nop_cmds
[1]->cmd_status
),(int)p
->nop_point
);
980 p
->scb
->cmd_cuc
= CUC_ABORT
;
983 p
->scb
->cbl_offset
= make16(p
->nop_cmds
[p
->nop_point
]);
984 p
->scb
->cmd_cuc
= CUC_START
;
987 dev
->trans_start
= jiffies
; /* prevent tx timeout */
993 printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev
->name
,p
->scb
->cus
);
994 printk("%s: command-stats: %04x %04x\n",dev
->name
,swab16(p
->xmit_cmds
[0]->cmd_status
),swab16(p
->xmit_cmds
[1]->cmd_status
));
995 printk("%s: check, whether you set the right interrupt number!\n",dev
->name
);
997 sun3_82586_close(dev
);
998 sun3_82586_open(dev
);
1000 dev
->trans_start
= jiffies
; /* prevent tx timeout */
1003 /******************************************************
1007 static int sun3_82586_send_packet(struct sk_buff
*skb
, struct net_device
*dev
)
1010 #ifndef NO_NOPCOMMANDS
1013 struct priv
*p
= netdev_priv(dev
);
1015 if(skb
->len
> XMIT_BUFF_SIZE
)
1017 printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev
->name
,XMIT_BUFF_SIZE
,skb
->len
);
1018 return NETDEV_TX_OK
;
1021 netif_stop_queue(dev
);
1023 #if(NUM_XMIT_BUFFS > 1)
1024 if(test_and_set_bit(0,(void *) &p
->lock
)) {
1025 printk("%s: Queue was locked\n",dev
->name
);
1026 return NETDEV_TX_BUSY
;
1032 if (len
< ETH_ZLEN
) {
1033 memset((void *)p
->xmit_cbuffs
[p
->xmit_count
], 0,
1037 skb_copy_from_linear_data(skb
, (void *)p
->xmit_cbuffs
[p
->xmit_count
], skb
->len
);
1039 #if (NUM_XMIT_BUFFS == 1)
1040 # ifdef NO_NOPCOMMANDS
1043 if(p
->scb
->cus
& CU_ACTIVE
)
1045 printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev
->name
);
1046 printk("%s: stat: %04x %04x\n",dev
->name
,p
->scb
->cus
,swab16(p
->xmit_cmds
[0]->cmd_status
));
1050 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1053 p
->xmit_cmds
[0]->cmd_status
= 0;
1055 if( (p
->scb
->cus
& CU_STATUS
) == CU_SUSPEND
)
1056 p
->scb
->cmd_cuc
= CUC_RESUME
;
1059 p
->scb
->cbl_offset
= make16(p
->xmit_cmds
[0]);
1060 p
->scb
->cmd_cuc
= CUC_START
;
1067 if( (p
->scb
->cus
& CU_ACTIVE
)) /* test it, because CU sometimes doesn't start immediately */
1069 if(p
->xmit_cmds
[0]->cmd_status
)
1072 printk("%s: Can't start transmit-command.\n",dev
->name
);
1075 next_nop
= (p
->nop_point
+ 1) & 0x1;
1076 p
->xmit_buffs
[0]->size
= swab16(TBD_LAST
| len
);
1078 p
->xmit_cmds
[0]->cmd_link
= p
->nop_cmds
[next_nop
]->cmd_link
1079 = make16((p
->nop_cmds
[next_nop
]));
1080 p
->xmit_cmds
[0]->cmd_status
= p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1082 p
->nop_cmds
[p
->nop_point
]->cmd_link
= make16((p
->xmit_cmds
[0]));
1083 p
->nop_point
= next_nop
;
1087 p
->xmit_buffs
[p
->xmit_count
]->size
= swab16(TBD_LAST
| len
);
1088 if( (next_nop
= p
->xmit_count
+ 1) == NUM_XMIT_BUFFS
)
1091 p
->xmit_cmds
[p
->xmit_count
]->cmd_status
= 0;
1092 /* linkpointer of xmit-command already points to next nop cmd */
1093 p
->nop_cmds
[next_nop
]->cmd_link
= make16((p
->nop_cmds
[next_nop
]));
1094 p
->nop_cmds
[next_nop
]->cmd_status
= 0;
1096 p
->nop_cmds
[p
->xmit_count
]->cmd_link
= make16((p
->xmit_cmds
[p
->xmit_count
]));
1097 p
->xmit_count
= next_nop
;
1100 unsigned long flags
;
1101 local_irq_save(flags
);
1102 if(p
->xmit_count
!= p
->xmit_last
)
1103 netif_wake_queue(dev
);
1105 local_irq_restore(flags
);
1110 return NETDEV_TX_OK
;
1113 /*******************************************
1114 * Someone wanna have the statistics
1117 static struct net_device_stats
*sun3_82586_get_stats(struct net_device
*dev
)
1119 struct priv
*p
= netdev_priv(dev
);
1120 unsigned short crc
,aln
,rsc
,ovrn
;
1122 crc
= swab16(p
->scb
->crc_errs
); /* get error-statistic from the ni82586 */
1123 p
->scb
->crc_errs
= 0;
1124 aln
= swab16(p
->scb
->aln_errs
);
1125 p
->scb
->aln_errs
= 0;
1126 rsc
= swab16(p
->scb
->rsc_errs
);
1127 p
->scb
->rsc_errs
= 0;
1128 ovrn
= swab16(p
->scb
->ovrn_errs
);
1129 p
->scb
->ovrn_errs
= 0;
1131 dev
->stats
.rx_crc_errors
+= crc
;
1132 dev
->stats
.rx_fifo_errors
+= ovrn
;
1133 dev
->stats
.rx_frame_errors
+= aln
;
1134 dev
->stats
.rx_dropped
+= rsc
;
1139 /********************************************************
1143 static void set_multicast_list(struct net_device
*dev
)
1145 netif_stop_queue(dev
);
1151 netif_wake_queue(dev
);
1155 #error This code is not currently supported as a module
1156 static struct net_device
*dev_sun3_82586
;
1158 int init_module(void)
1160 dev_sun3_82586
= sun3_82586_probe(-1);
1161 if (IS_ERR(dev_sun3_82586
))
1162 return PTR_ERR(dev_sun3_82586
);
1166 void cleanup_module(void)
1168 unsigned long ioaddr
= dev_sun3_82586
->base_addr
;
1169 unregister_netdev(dev_sun3_82586
);
1170 release_region(ioaddr
, SUN3_82586_TOTAL_SIZE
);
1171 iounmap((void *)ioaddr
);
1172 free_netdev(dev_sun3_82586
);
1178 * DUMP .. we expect a not running CMD unit and enough space
1180 void sun3_82586_dump(struct net_device
*dev
,void *ptr
)
1182 struct priv
*p
= netdev_priv(dev
);
1183 struct dump_cmd_struct
*dump_cmd
= (struct dump_cmd_struct
*) ptr
;
1186 p
->scb
->cmd_cuc
= CUC_ABORT
;
1189 WAIT_4_SCB_CMD_RUC();
1191 dump_cmd
->cmd_status
= 0;
1192 dump_cmd
->cmd_cmd
= CMD_DUMP
| CMD_LAST
;
1193 dump_cmd
->dump_offset
= make16((dump_cmd
+ 1));
1194 dump_cmd
->cmd_link
= 0xffff;
1196 p
->scb
->cbl_offset
= make16(dump_cmd
);
1197 p
->scb
->cmd_cuc
= CUC_START
;
1199 WAIT_4_STAT_COMPL(dump_cmd
);
1201 if( (dump_cmd
->cmd_status
& (STAT_COMPL
|STAT_OK
)) != (STAT_COMPL
|STAT_OK
) )
1202 printk("%s: Can't get dump information.\n",dev
->name
);
1204 for(i
=0;i
<170;i
++) {
1205 printk("%02x ",(int) ((unsigned char *) (dump_cmd
+ 1))[i
]);
1213 MODULE_LICENSE("GPL");