spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / net / wan / hdlc_x25.c
bloba49aec5efd2072507e0e35d9fa40fb2760df796f
1 /*
2 * Generic HDLC support routines for Linux
3 * X.25 support
5 * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of version 2 of the GNU General Public License
9 * as published by the Free Software Foundation.
12 #include <linux/errno.h>
13 #include <linux/gfp.h>
14 #include <linux/hdlc.h>
15 #include <linux/if_arp.h>
16 #include <linux/inetdevice.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/lapb.h>
20 #include <linux/module.h>
21 #include <linux/pkt_sched.h>
22 #include <linux/poll.h>
23 #include <linux/rtnetlink.h>
24 #include <linux/skbuff.h>
25 #include <net/x25device.h>
27 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);
29 /* These functions are callbacks called by LAPB layer */
31 static void x25_connect_disconnect(struct net_device *dev, int reason, int code)
33 struct sk_buff *skb;
34 unsigned char *ptr;
36 if ((skb = dev_alloc_skb(1)) == NULL) {
37 netdev_err(dev, "out of memory\n");
38 return;
41 ptr = skb_put(skb, 1);
42 *ptr = code;
44 skb->protocol = x25_type_trans(skb, dev);
45 netif_rx(skb);
50 static void x25_connected(struct net_device *dev, int reason)
52 x25_connect_disconnect(dev, reason, X25_IFACE_CONNECT);
57 static void x25_disconnected(struct net_device *dev, int reason)
59 x25_connect_disconnect(dev, reason, X25_IFACE_DISCONNECT);
64 static int x25_data_indication(struct net_device *dev, struct sk_buff *skb)
66 unsigned char *ptr;
68 skb_push(skb, 1);
70 if (skb_cow(skb, 1))
71 return NET_RX_DROP;
73 ptr = skb->data;
74 *ptr = X25_IFACE_DATA;
76 skb->protocol = x25_type_trans(skb, dev);
77 return netif_rx(skb);
82 static void x25_data_transmit(struct net_device *dev, struct sk_buff *skb)
84 hdlc_device *hdlc = dev_to_hdlc(dev);
85 hdlc->xmit(skb, dev); /* Ignore return value :-( */
90 static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
92 int result;
95 /* X.25 to LAPB */
96 switch (skb->data[0]) {
97 case X25_IFACE_DATA: /* Data to be transmitted */
98 skb_pull(skb, 1);
99 if ((result = lapb_data_request(dev, skb)) != LAPB_OK)
100 dev_kfree_skb(skb);
101 return NETDEV_TX_OK;
103 case X25_IFACE_CONNECT:
104 if ((result = lapb_connect_request(dev))!= LAPB_OK) {
105 if (result == LAPB_CONNECTED)
106 /* Send connect confirm. msg to level 3 */
107 x25_connected(dev, 0);
108 else
109 netdev_err(dev, "LAPB connect request failed, error code = %i\n",
110 result);
112 break;
114 case X25_IFACE_DISCONNECT:
115 if ((result = lapb_disconnect_request(dev)) != LAPB_OK) {
116 if (result == LAPB_NOTCONNECTED)
117 /* Send disconnect confirm. msg to level 3 */
118 x25_disconnected(dev, 0);
119 else
120 netdev_err(dev, "LAPB disconnect request failed, error code = %i\n",
121 result);
123 break;
125 default: /* to be defined */
126 break;
129 dev_kfree_skb(skb);
130 return NETDEV_TX_OK;
135 static int x25_open(struct net_device *dev)
137 int result;
138 static const struct lapb_register_struct cb = {
139 .connect_confirmation = x25_connected,
140 .connect_indication = x25_connected,
141 .disconnect_confirmation = x25_disconnected,
142 .disconnect_indication = x25_disconnected,
143 .data_indication = x25_data_indication,
144 .data_transmit = x25_data_transmit,
147 result = lapb_register(dev, &cb);
148 if (result != LAPB_OK)
149 return result;
150 return 0;
155 static void x25_close(struct net_device *dev)
157 lapb_unregister(dev);
162 static int x25_rx(struct sk_buff *skb)
164 struct net_device *dev = skb->dev;
166 if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) {
167 dev->stats.rx_dropped++;
168 return NET_RX_DROP;
171 if (lapb_data_received(dev, skb) == LAPB_OK)
172 return NET_RX_SUCCESS;
174 dev->stats.rx_errors++;
175 dev_kfree_skb_any(skb);
176 return NET_RX_DROP;
180 static struct hdlc_proto proto = {
181 .open = x25_open,
182 .close = x25_close,
183 .ioctl = x25_ioctl,
184 .netif_rx = x25_rx,
185 .xmit = x25_xmit,
186 .module = THIS_MODULE,
190 static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
192 hdlc_device *hdlc = dev_to_hdlc(dev);
193 int result;
195 switch (ifr->ifr_settings.type) {
196 case IF_GET_PROTO:
197 if (dev_to_hdlc(dev)->proto != &proto)
198 return -EINVAL;
199 ifr->ifr_settings.type = IF_PROTO_X25;
200 return 0; /* return protocol only, no settable parameters */
202 case IF_PROTO_X25:
203 if (!capable(CAP_NET_ADMIN))
204 return -EPERM;
206 if (dev->flags & IFF_UP)
207 return -EBUSY;
209 result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT);
210 if (result)
211 return result;
213 if ((result = attach_hdlc_protocol(dev, &proto, 0)))
214 return result;
215 dev->type = ARPHRD_X25;
216 netif_dormant_off(dev);
217 return 0;
220 return -EINVAL;
224 static int __init mod_init(void)
226 register_hdlc_protocol(&proto);
227 return 0;
232 static void __exit mod_exit(void)
234 unregister_hdlc_protocol(&proto);
238 module_init(mod_init);
239 module_exit(mod_exit);
241 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
242 MODULE_DESCRIPTION("X.25 protocol support for generic HDLC");
243 MODULE_LICENSE("GPL v2");