spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / net / wireless / rt2x00 / rt2x00lib.h
blob4cdf247a870d6e21dbc5557e1e1aad18fa4253c7
1 /*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
4 <http://rt2x00.serialmonkey.com>
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the
18 Free Software Foundation, Inc.,
19 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Module: rt2x00lib
24 Abstract: Data structures and definitions for the rt2x00lib module.
27 #ifndef RT2X00LIB_H
28 #define RT2X00LIB_H
31 * Interval defines
33 #define WATCHDOG_INTERVAL round_jiffies_relative(HZ)
34 #define LINK_TUNE_INTERVAL round_jiffies_relative(HZ)
35 #define AGC_INTERVAL round_jiffies_relative(4 * HZ)
38 * rt2x00_rate: Per rate device information
40 struct rt2x00_rate {
41 unsigned short flags;
42 #define DEV_RATE_CCK 0x0001
43 #define DEV_RATE_OFDM 0x0002
44 #define DEV_RATE_SHORT_PREAMBLE 0x0004
46 unsigned short bitrate; /* In 100kbit/s */
47 unsigned short ratemask;
49 unsigned short plcp;
50 unsigned short mcs;
53 extern const struct rt2x00_rate rt2x00_supported_rates[12];
55 static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
57 return &rt2x00_supported_rates[hw_value & 0xff];
60 #define RATE_MCS(__mode, __mcs) \
61 ((((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff))
63 static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
65 return (mcs_value & 0x00ff);
69 * Radio control handlers.
71 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
72 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
75 * Initialization handlers.
77 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev);
78 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev);
81 * Configuration handlers.
83 void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
84 struct rt2x00_intf *intf,
85 enum nl80211_iftype type,
86 const u8 *mac, const u8 *bssid);
87 void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev,
88 struct rt2x00_intf *intf,
89 struct ieee80211_bss_conf *conf,
90 u32 changed);
91 void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
92 struct antenna_setup ant);
93 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
94 struct ieee80211_conf *conf,
95 const unsigned int changed_flags);
97 /**
98 * DOC: Queue handlers
102 * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes.
103 * @entry: The entry for which the skb will be applicable.
105 struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry);
108 * rt2x00queue_free_skb - free a skb
109 * @entry: The entry for which the skb will be applicable.
111 void rt2x00queue_free_skb(struct queue_entry *entry);
114 * rt2x00queue_align_frame - Align 802.11 frame to 4-byte boundary
115 * @skb: The skb to align
117 * Align the start of the 802.11 frame to a 4-byte boundary, this could
118 * mean the payload is not aligned properly though.
120 void rt2x00queue_align_frame(struct sk_buff *skb);
123 * rt2x00queue_insert_l2pad - Align 802.11 header & payload to 4-byte boundary
124 * @skb: The skb to align
125 * @header_length: Length of 802.11 header
127 * Apply L2 padding to align both header and payload to 4-byte boundary
129 void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length);
132 * rt2x00queue_insert_l2pad - Remove L2 padding from 802.11 frame
133 * @skb: The skb to align
134 * @header_length: Length of 802.11 header
136 * Remove L2 padding used to align both header and payload to 4-byte boundary,
137 * by removing the L2 padding the header will no longer be 4-byte aligned.
139 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length);
142 * rt2x00queue_write_tx_frame - Write TX frame to hardware
143 * @queue: Queue over which the frame should be send
144 * @skb: The skb to send
145 * @local: frame is not from mac80211
147 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
148 bool local);
151 * rt2x00queue_update_beacon - Send new beacon from mac80211
152 * to hardware. Handles locking by itself (mutex).
153 * @rt2x00dev: Pointer to &struct rt2x00_dev.
154 * @vif: Interface for which the beacon should be updated.
156 int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
157 struct ieee80211_vif *vif);
160 * rt2x00queue_update_beacon_locked - Send new beacon from mac80211
161 * to hardware. Caller needs to ensure locking.
162 * @rt2x00dev: Pointer to &struct rt2x00_dev.
163 * @vif: Interface for which the beacon should be updated.
165 int rt2x00queue_update_beacon_locked(struct rt2x00_dev *rt2x00dev,
166 struct ieee80211_vif *vif);
169 * rt2x00queue_clear_beacon - Clear beacon in hardware
170 * @rt2x00dev: Pointer to &struct rt2x00_dev.
171 * @vif: Interface for which the beacon should be updated.
173 int rt2x00queue_clear_beacon(struct rt2x00_dev *rt2x00dev,
174 struct ieee80211_vif *vif);
177 * rt2x00queue_index_inc - Index incrementation function
178 * @entry: Queue entry (&struct queue_entry) to perform the action on.
179 * @index: Index type (&enum queue_index) to perform the action on.
181 * This function will increase the requested index on the entry's queue,
182 * it will grab the appropriate locks and handle queue overflow events by
183 * resetting the index to the start of the queue.
185 void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index);
188 * rt2x00queue_init_queues - Initialize all data queues
189 * @rt2x00dev: Pointer to &struct rt2x00_dev.
191 * This function will loop through all available queues to clear all
192 * index numbers and set the queue entry to the correct initialization
193 * state.
195 void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev);
197 int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev);
198 void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev);
199 int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev);
200 void rt2x00queue_free(struct rt2x00_dev *rt2x00dev);
203 * rt2x00link_update_stats - Update link statistics from RX frame
204 * @rt2x00dev: Pointer to &struct rt2x00_dev.
205 * @skb: Received frame
206 * @rxdesc: Received frame descriptor
208 * Update link statistics based on the information from the
209 * received frame descriptor.
211 void rt2x00link_update_stats(struct rt2x00_dev *rt2x00dev,
212 struct sk_buff *skb,
213 struct rxdone_entry_desc *rxdesc);
216 * rt2x00link_start_tuner - Start periodic link tuner work
217 * @rt2x00dev: Pointer to &struct rt2x00_dev.
219 * This start the link tuner periodic work, this work will
220 * be executed periodically until &rt2x00link_stop_tuner has
221 * been called.
223 void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev);
226 * rt2x00link_stop_tuner - Stop periodic link tuner work
227 * @rt2x00dev: Pointer to &struct rt2x00_dev.
229 * After this function completed the link tuner will not
230 * be running until &rt2x00link_start_tuner is called.
232 void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev);
235 * rt2x00link_reset_tuner - Reset periodic link tuner work
236 * @rt2x00dev: Pointer to &struct rt2x00_dev.
237 * @antenna: Should the antenna tuning also be reset
239 * The VGC limit configured in the hardware will be reset to 0
240 * which forces the driver to rediscover the correct value for
241 * the current association. This is needed when configuration
242 * options have changed which could drastically change the
243 * SNR level or link quality (i.e. changing the antenna setting).
245 * Resetting the link tuner will also cause the periodic work counter
246 * to be reset. Any driver which has a fixed limit on the number
247 * of rounds the link tuner is supposed to work will accept the
248 * tuner actions again if this limit was previously reached.
250 * If @antenna is set to true a the software antenna diversity
251 * tuning will also be reset.
253 void rt2x00link_reset_tuner(struct rt2x00_dev *rt2x00dev, bool antenna);
256 * rt2x00link_start_watchdog - Start periodic watchdog monitoring
257 * @rt2x00dev: Pointer to &struct rt2x00_dev.
259 * This start the watchdog periodic work, this work will
260 *be executed periodically until &rt2x00link_stop_watchdog has
261 * been called.
263 void rt2x00link_start_watchdog(struct rt2x00_dev *rt2x00dev);
266 * rt2x00link_stop_watchdog - Stop periodic watchdog monitoring
267 * @rt2x00dev: Pointer to &struct rt2x00_dev.
269 * After this function completed the watchdog monitoring will not
270 * be running until &rt2x00link_start_watchdog is called.
272 void rt2x00link_stop_watchdog(struct rt2x00_dev *rt2x00dev);
275 * rt2x00link_start_agc - Start periodic gain calibration
276 * @rt2x00dev: Pointer to &struct rt2x00_dev.
278 void rt2x00link_start_agc(struct rt2x00_dev *rt2x00dev);
281 * rt2x00link_stop_agc - Stop periodic gain calibration
282 * @rt2x00dev: Pointer to &struct rt2x00_dev.
284 void rt2x00link_stop_agc(struct rt2x00_dev *rt2x00dev);
287 * rt2x00link_register - Initialize link tuning & watchdog functionality
288 * @rt2x00dev: Pointer to &struct rt2x00_dev.
290 * Initialize work structure and all link tuning and watchdog related
291 * parameters. This will not start the periodic work itself.
293 void rt2x00link_register(struct rt2x00_dev *rt2x00dev);
296 * Firmware handlers.
298 #ifdef CONFIG_RT2X00_LIB_FIRMWARE
299 int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev);
300 void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev);
301 #else
302 static inline int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev)
304 return 0;
306 static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev)
309 #endif /* CONFIG_RT2X00_LIB_FIRMWARE */
312 * Debugfs handlers.
314 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
315 void rt2x00debug_register(struct rt2x00_dev *rt2x00dev);
316 void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev);
317 void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
318 struct rxdone_entry_desc *rxdesc);
319 #else
320 static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev)
324 static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev)
328 static inline void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev,
329 struct rxdone_entry_desc *rxdesc)
332 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
335 * Crypto handlers.
337 #ifdef CONFIG_RT2X00_LIB_CRYPTO
338 enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key);
339 void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
340 struct sk_buff *skb,
341 struct txentry_desc *txdesc);
342 unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
343 struct sk_buff *skb);
344 void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
345 struct txentry_desc *txdesc);
346 void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
347 struct txentry_desc *txdesc);
348 void rt2x00crypto_tx_insert_iv(struct sk_buff *skb, unsigned int header_length);
349 void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
350 unsigned int header_length,
351 struct rxdone_entry_desc *rxdesc);
352 #else
353 static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf *key)
355 return CIPHER_NONE;
358 static inline void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev,
359 struct sk_buff *skb,
360 struct txentry_desc *txdesc)
364 static inline unsigned int rt2x00crypto_tx_overhead(struct rt2x00_dev *rt2x00dev,
365 struct sk_buff *skb)
367 return 0;
370 static inline void rt2x00crypto_tx_copy_iv(struct sk_buff *skb,
371 struct txentry_desc *txdesc)
375 static inline void rt2x00crypto_tx_remove_iv(struct sk_buff *skb,
376 struct txentry_desc *txdesc)
380 static inline void rt2x00crypto_tx_insert_iv(struct sk_buff *skb,
381 unsigned int header_length)
385 static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
386 unsigned int header_length,
387 struct rxdone_entry_desc *rxdesc)
390 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
393 * RFkill handlers.
395 static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev)
397 if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
398 wiphy_rfkill_start_polling(rt2x00dev->hw->wiphy);
401 static inline void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev)
403 if (test_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags))
404 wiphy_rfkill_stop_polling(rt2x00dev->hw->wiphy);
408 * LED handlers
410 #ifdef CONFIG_RT2X00_LIB_LEDS
411 void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi);
412 void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled);
413 void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled);
414 void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled);
415 void rt2x00leds_register(struct rt2x00_dev *rt2x00dev);
416 void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev);
417 void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev);
418 void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev);
419 #else
420 static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev,
421 int rssi)
425 static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev,
426 bool enabled)
430 static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev,
431 bool enabled)
435 static inline void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev,
436 bool enabled)
440 static inline void rt2x00leds_register(struct rt2x00_dev *rt2x00dev)
444 static inline void rt2x00leds_unregister(struct rt2x00_dev *rt2x00dev)
448 static inline void rt2x00leds_suspend(struct rt2x00_dev *rt2x00dev)
452 static inline void rt2x00leds_resume(struct rt2x00_dev *rt2x00dev)
455 #endif /* CONFIG_RT2X00_LIB_LEDS */
457 #endif /* RT2X00LIB_H */