spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / pci / hotplug / ibmphp_ebda.c
blob2850e64dedae3e0cb9e258d113b75156aff891d3
1 /*
2 * IBM Hot Plug Controller Driver
4 * Written By: Tong Yu, IBM Corporation
6 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2001-2003 IBM Corp.
9 * All rights reserved.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 * Send feedback to <gregkh@us.ibm.com>
30 #include <linux/module.h>
31 #include <linux/errno.h>
32 #include <linux/mm.h>
33 #include <linux/slab.h>
34 #include <linux/pci.h>
35 #include <linux/list.h>
36 #include <linux/init.h>
37 #include "ibmphp.h"
40 * POST builds data blocks(in this data block definition, a char-1
41 * byte, short(or word)-2 byte, long(dword)-4 byte) in the Extended
42 * BIOS Data Area which describe the configuration of the hot-plug
43 * controllers and resources used by the PCI Hot-Plug devices.
45 * This file walks EBDA, maps data block from physical addr,
46 * reconstruct linked lists about all system resource(MEM, PFM, IO)
47 * already assigned by POST, as well as linked lists about hot plug
48 * controllers (ctlr#, slot#, bus&slot features...)
51 /* Global lists */
52 LIST_HEAD (ibmphp_ebda_pci_rsrc_head);
53 LIST_HEAD (ibmphp_slot_head);
55 /* Local variables */
56 static struct ebda_hpc_list *hpc_list_ptr;
57 static struct ebda_rsrc_list *rsrc_list_ptr;
58 static struct rio_table_hdr *rio_table_ptr = NULL;
59 static LIST_HEAD (ebda_hpc_head);
60 static LIST_HEAD (bus_info_head);
61 static LIST_HEAD (rio_vg_head);
62 static LIST_HEAD (rio_lo_head);
63 static LIST_HEAD (opt_vg_head);
64 static LIST_HEAD (opt_lo_head);
65 static void __iomem *io_mem;
67 /* Local functions */
68 static int ebda_rsrc_controller (void);
69 static int ebda_rsrc_rsrc (void);
70 static int ebda_rio_table (void);
72 static struct ebda_hpc_list * __init alloc_ebda_hpc_list (void)
74 return kzalloc(sizeof(struct ebda_hpc_list), GFP_KERNEL);
77 static struct controller *alloc_ebda_hpc (u32 slot_count, u32 bus_count)
79 struct controller *controller;
80 struct ebda_hpc_slot *slots;
81 struct ebda_hpc_bus *buses;
83 controller = kzalloc(sizeof(struct controller), GFP_KERNEL);
84 if (!controller)
85 goto error;
87 slots = kcalloc(slot_count, sizeof(struct ebda_hpc_slot), GFP_KERNEL);
88 if (!slots)
89 goto error_contr;
90 controller->slots = slots;
92 buses = kcalloc(bus_count, sizeof(struct ebda_hpc_bus), GFP_KERNEL);
93 if (!buses)
94 goto error_slots;
95 controller->buses = buses;
97 return controller;
98 error_slots:
99 kfree(controller->slots);
100 error_contr:
101 kfree(controller);
102 error:
103 return NULL;
106 static void free_ebda_hpc (struct controller *controller)
108 kfree (controller->slots);
109 kfree (controller->buses);
110 kfree (controller);
113 static struct ebda_rsrc_list * __init alloc_ebda_rsrc_list (void)
115 return kzalloc(sizeof(struct ebda_rsrc_list), GFP_KERNEL);
118 static struct ebda_pci_rsrc *alloc_ebda_pci_rsrc (void)
120 return kzalloc(sizeof(struct ebda_pci_rsrc), GFP_KERNEL);
123 static void __init print_bus_info (void)
125 struct bus_info *ptr;
127 list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
128 debug ("%s - slot_min = %x\n", __func__, ptr->slot_min);
129 debug ("%s - slot_max = %x\n", __func__, ptr->slot_max);
130 debug ("%s - slot_count = %x\n", __func__, ptr->slot_count);
131 debug ("%s - bus# = %x\n", __func__, ptr->busno);
132 debug ("%s - current_speed = %x\n", __func__, ptr->current_speed);
133 debug ("%s - controller_id = %x\n", __func__, ptr->controller_id);
135 debug ("%s - slots_at_33_conv = %x\n", __func__, ptr->slots_at_33_conv);
136 debug ("%s - slots_at_66_conv = %x\n", __func__, ptr->slots_at_66_conv);
137 debug ("%s - slots_at_66_pcix = %x\n", __func__, ptr->slots_at_66_pcix);
138 debug ("%s - slots_at_100_pcix = %x\n", __func__, ptr->slots_at_100_pcix);
139 debug ("%s - slots_at_133_pcix = %x\n", __func__, ptr->slots_at_133_pcix);
144 static void print_lo_info (void)
146 struct rio_detail *ptr;
147 debug ("print_lo_info ----\n");
148 list_for_each_entry(ptr, &rio_lo_head, rio_detail_list) {
149 debug ("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
150 debug ("%s - rio_type = %x\n", __func__, ptr->rio_type);
151 debug ("%s - owner_id = %x\n", __func__, ptr->owner_id);
152 debug ("%s - first_slot_num = %x\n", __func__, ptr->first_slot_num);
153 debug ("%s - wpindex = %x\n", __func__, ptr->wpindex);
154 debug ("%s - chassis_num = %x\n", __func__, ptr->chassis_num);
159 static void print_vg_info (void)
161 struct rio_detail *ptr;
162 debug ("%s ---\n", __func__);
163 list_for_each_entry(ptr, &rio_vg_head, rio_detail_list) {
164 debug ("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
165 debug ("%s - rio_type = %x\n", __func__, ptr->rio_type);
166 debug ("%s - owner_id = %x\n", __func__, ptr->owner_id);
167 debug ("%s - first_slot_num = %x\n", __func__, ptr->first_slot_num);
168 debug ("%s - wpindex = %x\n", __func__, ptr->wpindex);
169 debug ("%s - chassis_num = %x\n", __func__, ptr->chassis_num);
174 static void __init print_ebda_pci_rsrc (void)
176 struct ebda_pci_rsrc *ptr;
178 list_for_each_entry(ptr, &ibmphp_ebda_pci_rsrc_head, ebda_pci_rsrc_list) {
179 debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
180 __func__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr);
184 static void __init print_ibm_slot (void)
186 struct slot *ptr;
188 list_for_each_entry(ptr, &ibmphp_slot_head, ibm_slot_list) {
189 debug ("%s - slot_number: %x\n", __func__, ptr->number);
193 static void __init print_opt_vg (void)
195 struct opt_rio *ptr;
196 debug ("%s ---\n", __func__);
197 list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
198 debug ("%s - rio_type %x\n", __func__, ptr->rio_type);
199 debug ("%s - chassis_num: %x\n", __func__, ptr->chassis_num);
200 debug ("%s - first_slot_num: %x\n", __func__, ptr->first_slot_num);
201 debug ("%s - middle_num: %x\n", __func__, ptr->middle_num);
205 static void __init print_ebda_hpc (void)
207 struct controller *hpc_ptr;
208 u16 index;
210 list_for_each_entry(hpc_ptr, &ebda_hpc_head, ebda_hpc_list) {
211 for (index = 0; index < hpc_ptr->slot_count; index++) {
212 debug ("%s - physical slot#: %x\n", __func__, hpc_ptr->slots[index].slot_num);
213 debug ("%s - pci bus# of the slot: %x\n", __func__, hpc_ptr->slots[index].slot_bus_num);
214 debug ("%s - index into ctlr addr: %x\n", __func__, hpc_ptr->slots[index].ctl_index);
215 debug ("%s - cap of the slot: %x\n", __func__, hpc_ptr->slots[index].slot_cap);
218 for (index = 0; index < hpc_ptr->bus_count; index++) {
219 debug ("%s - bus# of each bus controlled by this ctlr: %x\n", __func__, hpc_ptr->buses[index].bus_num);
222 debug ("%s - type of hpc: %x\n", __func__, hpc_ptr->ctlr_type);
223 switch (hpc_ptr->ctlr_type) {
224 case 1:
225 debug ("%s - bus: %x\n", __func__, hpc_ptr->u.pci_ctlr.bus);
226 debug ("%s - dev_fun: %x\n", __func__, hpc_ptr->u.pci_ctlr.dev_fun);
227 debug ("%s - irq: %x\n", __func__, hpc_ptr->irq);
228 break;
230 case 0:
231 debug ("%s - io_start: %x\n", __func__, hpc_ptr->u.isa_ctlr.io_start);
232 debug ("%s - io_end: %x\n", __func__, hpc_ptr->u.isa_ctlr.io_end);
233 debug ("%s - irq: %x\n", __func__, hpc_ptr->irq);
234 break;
236 case 2:
237 case 4:
238 debug ("%s - wpegbbar: %lx\n", __func__, hpc_ptr->u.wpeg_ctlr.wpegbbar);
239 debug ("%s - i2c_addr: %x\n", __func__, hpc_ptr->u.wpeg_ctlr.i2c_addr);
240 debug ("%s - irq: %x\n", __func__, hpc_ptr->irq);
241 break;
246 int __init ibmphp_access_ebda (void)
248 u8 format, num_ctlrs, rio_complete, hs_complete, ebda_sz;
249 u16 ebda_seg, num_entries, next_offset, offset, blk_id, sub_addr, re, rc_id, re_id, base;
250 int rc = 0;
253 rio_complete = 0;
254 hs_complete = 0;
256 io_mem = ioremap ((0x40 << 4) + 0x0e, 2);
257 if (!io_mem )
258 return -ENOMEM;
259 ebda_seg = readw (io_mem);
260 iounmap (io_mem);
261 debug ("returned ebda segment: %x\n", ebda_seg);
263 io_mem = ioremap(ebda_seg<<4, 1);
264 if (!io_mem)
265 return -ENOMEM;
266 ebda_sz = readb(io_mem);
267 iounmap(io_mem);
268 debug("ebda size: %d(KiB)\n", ebda_sz);
269 if (ebda_sz == 0)
270 return -ENOMEM;
272 io_mem = ioremap(ebda_seg<<4, (ebda_sz * 1024));
273 if (!io_mem )
274 return -ENOMEM;
275 next_offset = 0x180;
277 for (;;) {
278 offset = next_offset;
280 /* Make sure what we read is still in the mapped section */
281 if (WARN(offset > (ebda_sz * 1024 - 4),
282 "ibmphp_ebda: next read is beyond ebda_sz\n"))
283 break;
285 next_offset = readw (io_mem + offset); /* offset of next blk */
287 offset += 2;
288 if (next_offset == 0) /* 0 indicate it's last blk */
289 break;
290 blk_id = readw (io_mem + offset); /* this blk id */
292 offset += 2;
293 /* check if it is hot swap block or rio block */
294 if (blk_id != 0x4853 && blk_id != 0x4752)
295 continue;
296 /* found hs table */
297 if (blk_id == 0x4853) {
298 debug ("now enter hot swap block---\n");
299 debug ("hot blk id: %x\n", blk_id);
300 format = readb (io_mem + offset);
302 offset += 1;
303 if (format != 4)
304 goto error_nodev;
305 debug ("hot blk format: %x\n", format);
306 /* hot swap sub blk */
307 base = offset;
309 sub_addr = base;
310 re = readw (io_mem + sub_addr); /* next sub blk */
312 sub_addr += 2;
313 rc_id = readw (io_mem + sub_addr); /* sub blk id */
315 sub_addr += 2;
316 if (rc_id != 0x5243)
317 goto error_nodev;
318 /* rc sub blk signature */
319 num_ctlrs = readb (io_mem + sub_addr);
321 sub_addr += 1;
322 hpc_list_ptr = alloc_ebda_hpc_list ();
323 if (!hpc_list_ptr) {
324 rc = -ENOMEM;
325 goto out;
327 hpc_list_ptr->format = format;
328 hpc_list_ptr->num_ctlrs = num_ctlrs;
329 hpc_list_ptr->phys_addr = sub_addr; /* offset of RSRC_CONTROLLER blk */
330 debug ("info about hpc descriptor---\n");
331 debug ("hot blk format: %x\n", format);
332 debug ("num of controller: %x\n", num_ctlrs);
333 debug ("offset of hpc data structure enteries: %x\n ", sub_addr);
335 sub_addr = base + re; /* re sub blk */
336 /* FIXME: rc is never used/checked */
337 rc = readw (io_mem + sub_addr); /* next sub blk */
339 sub_addr += 2;
340 re_id = readw (io_mem + sub_addr); /* sub blk id */
342 sub_addr += 2;
343 if (re_id != 0x5245)
344 goto error_nodev;
346 /* signature of re */
347 num_entries = readw (io_mem + sub_addr);
349 sub_addr += 2; /* offset of RSRC_ENTRIES blk */
350 rsrc_list_ptr = alloc_ebda_rsrc_list ();
351 if (!rsrc_list_ptr ) {
352 rc = -ENOMEM;
353 goto out;
355 rsrc_list_ptr->format = format;
356 rsrc_list_ptr->num_entries = num_entries;
357 rsrc_list_ptr->phys_addr = sub_addr;
359 debug ("info about rsrc descriptor---\n");
360 debug ("format: %x\n", format);
361 debug ("num of rsrc: %x\n", num_entries);
362 debug ("offset of rsrc data structure enteries: %x\n ", sub_addr);
364 hs_complete = 1;
365 } else {
366 /* found rio table, blk_id == 0x4752 */
367 debug ("now enter io table ---\n");
368 debug ("rio blk id: %x\n", blk_id);
370 rio_table_ptr = kzalloc(sizeof(struct rio_table_hdr), GFP_KERNEL);
371 if (!rio_table_ptr)
372 return -ENOMEM;
373 rio_table_ptr->ver_num = readb (io_mem + offset);
374 rio_table_ptr->scal_count = readb (io_mem + offset + 1);
375 rio_table_ptr->riodev_count = readb (io_mem + offset + 2);
376 rio_table_ptr->offset = offset +3 ;
378 debug("info about rio table hdr ---\n");
379 debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ",
380 rio_table_ptr->ver_num, rio_table_ptr->scal_count,
381 rio_table_ptr->riodev_count, rio_table_ptr->offset);
383 rio_complete = 1;
387 if (!hs_complete && !rio_complete)
388 goto error_nodev;
390 if (rio_table_ptr) {
391 if (rio_complete && rio_table_ptr->ver_num == 3) {
392 rc = ebda_rio_table ();
393 if (rc)
394 goto out;
397 rc = ebda_rsrc_controller ();
398 if (rc)
399 goto out;
401 rc = ebda_rsrc_rsrc ();
402 goto out;
403 error_nodev:
404 rc = -ENODEV;
405 out:
406 iounmap (io_mem);
407 return rc;
411 * map info of scalability details and rio details from physical address
413 static int __init ebda_rio_table (void)
415 u16 offset;
416 u8 i;
417 struct rio_detail *rio_detail_ptr;
419 offset = rio_table_ptr->offset;
420 offset += 12 * rio_table_ptr->scal_count;
422 // we do concern about rio details
423 for (i = 0; i < rio_table_ptr->riodev_count; i++) {
424 rio_detail_ptr = kzalloc(sizeof(struct rio_detail), GFP_KERNEL);
425 if (!rio_detail_ptr)
426 return -ENOMEM;
427 rio_detail_ptr->rio_node_id = readb (io_mem + offset);
428 rio_detail_ptr->bbar = readl (io_mem + offset + 1);
429 rio_detail_ptr->rio_type = readb (io_mem + offset + 5);
430 rio_detail_ptr->owner_id = readb (io_mem + offset + 6);
431 rio_detail_ptr->port0_node_connect = readb (io_mem + offset + 7);
432 rio_detail_ptr->port0_port_connect = readb (io_mem + offset + 8);
433 rio_detail_ptr->port1_node_connect = readb (io_mem + offset + 9);
434 rio_detail_ptr->port1_port_connect = readb (io_mem + offset + 10);
435 rio_detail_ptr->first_slot_num = readb (io_mem + offset + 11);
436 rio_detail_ptr->status = readb (io_mem + offset + 12);
437 rio_detail_ptr->wpindex = readb (io_mem + offset + 13);
438 rio_detail_ptr->chassis_num = readb (io_mem + offset + 14);
439 // debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
440 //create linked list of chassis
441 if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
442 list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head);
443 //create linked list of expansion box
444 else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
445 list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head);
446 else
447 // not in my concern
448 kfree (rio_detail_ptr);
449 offset += 15;
451 print_lo_info ();
452 print_vg_info ();
453 return 0;
457 * reorganizing linked list of chassis
459 static struct opt_rio *search_opt_vg (u8 chassis_num)
461 struct opt_rio *ptr;
462 list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
463 if (ptr->chassis_num == chassis_num)
464 return ptr;
466 return NULL;
469 static int __init combine_wpg_for_chassis (void)
471 struct opt_rio *opt_rio_ptr = NULL;
472 struct rio_detail *rio_detail_ptr = NULL;
474 list_for_each_entry(rio_detail_ptr, &rio_vg_head, rio_detail_list) {
475 opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num);
476 if (!opt_rio_ptr) {
477 opt_rio_ptr = kzalloc(sizeof(struct opt_rio), GFP_KERNEL);
478 if (!opt_rio_ptr)
479 return -ENOMEM;
480 opt_rio_ptr->rio_type = rio_detail_ptr->rio_type;
481 opt_rio_ptr->chassis_num = rio_detail_ptr->chassis_num;
482 opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
483 opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
484 list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head);
485 } else {
486 opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
487 opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
490 print_opt_vg ();
491 return 0;
495 * reorganizing linked list of expansion box
497 static struct opt_rio_lo *search_opt_lo (u8 chassis_num)
499 struct opt_rio_lo *ptr;
500 list_for_each_entry(ptr, &opt_lo_head, opt_rio_lo_list) {
501 if (ptr->chassis_num == chassis_num)
502 return ptr;
504 return NULL;
507 static int combine_wpg_for_expansion (void)
509 struct opt_rio_lo *opt_rio_lo_ptr = NULL;
510 struct rio_detail *rio_detail_ptr = NULL;
512 list_for_each_entry(rio_detail_ptr, &rio_lo_head, rio_detail_list) {
513 opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num);
514 if (!opt_rio_lo_ptr) {
515 opt_rio_lo_ptr = kzalloc(sizeof(struct opt_rio_lo), GFP_KERNEL);
516 if (!opt_rio_lo_ptr)
517 return -ENOMEM;
518 opt_rio_lo_ptr->rio_type = rio_detail_ptr->rio_type;
519 opt_rio_lo_ptr->chassis_num = rio_detail_ptr->chassis_num;
520 opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
521 opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
522 opt_rio_lo_ptr->pack_count = 1;
524 list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
525 } else {
526 opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
527 opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
528 opt_rio_lo_ptr->pack_count = 2;
531 return 0;
535 /* Since we don't know the max slot number per each chassis, hence go
536 * through the list of all chassis to find out the range
537 * Arguments: slot_num, 1st slot number of the chassis we think we are on,
538 * var (0 = chassis, 1 = expansion box)
540 static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
542 struct opt_rio *opt_vg_ptr = NULL;
543 struct opt_rio_lo *opt_lo_ptr = NULL;
544 int rc = 0;
546 if (!var) {
547 list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
548 if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
549 rc = -ENODEV;
550 break;
553 } else {
554 list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
555 if ((first_slot < opt_lo_ptr->first_slot_num) && (slot_num >= opt_lo_ptr->first_slot_num)) {
556 rc = -ENODEV;
557 break;
561 return rc;
564 static struct opt_rio_lo * find_rxe_num (u8 slot_num)
566 struct opt_rio_lo *opt_lo_ptr;
568 list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
569 //check to see if this slot_num belongs to expansion box
570 if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
571 return opt_lo_ptr;
573 return NULL;
576 static struct opt_rio * find_chassis_num (u8 slot_num)
578 struct opt_rio *opt_vg_ptr;
580 list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
581 //check to see if this slot_num belongs to chassis
582 if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
583 return opt_vg_ptr;
585 return NULL;
588 /* This routine will find out how many slots are in the chassis, so that
589 * the slot numbers for rxe100 would start from 1, and not from 7, or 6 etc
591 static u8 calculate_first_slot (u8 slot_num)
593 u8 first_slot = 1;
594 struct slot * slot_cur;
596 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
597 if (slot_cur->ctrl) {
598 if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
599 first_slot = slot_cur->ctrl->ending_slot_num;
602 return first_slot + 1;
606 #define SLOT_NAME_SIZE 30
608 static char *create_file_name (struct slot * slot_cur)
610 struct opt_rio *opt_vg_ptr = NULL;
611 struct opt_rio_lo *opt_lo_ptr = NULL;
612 static char str[SLOT_NAME_SIZE];
613 int which = 0; /* rxe = 1, chassis = 0 */
614 u8 number = 1; /* either chassis or rxe # */
615 u8 first_slot = 1;
616 u8 slot_num;
617 u8 flag = 0;
619 if (!slot_cur) {
620 err ("Structure passed is empty\n");
621 return NULL;
624 slot_num = slot_cur->number;
626 memset (str, 0, sizeof(str));
628 if (rio_table_ptr) {
629 if (rio_table_ptr->ver_num == 3) {
630 opt_vg_ptr = find_chassis_num (slot_num);
631 opt_lo_ptr = find_rxe_num (slot_num);
634 if (opt_vg_ptr) {
635 if (opt_lo_ptr) {
636 if ((slot_num - opt_vg_ptr->first_slot_num) > (slot_num - opt_lo_ptr->first_slot_num)) {
637 number = opt_lo_ptr->chassis_num;
638 first_slot = opt_lo_ptr->first_slot_num;
639 which = 1; /* it is RXE */
640 } else {
641 first_slot = opt_vg_ptr->first_slot_num;
642 number = opt_vg_ptr->chassis_num;
643 which = 0;
645 } else {
646 first_slot = opt_vg_ptr->first_slot_num;
647 number = opt_vg_ptr->chassis_num;
648 which = 0;
650 ++flag;
651 } else if (opt_lo_ptr) {
652 number = opt_lo_ptr->chassis_num;
653 first_slot = opt_lo_ptr->first_slot_num;
654 which = 1;
655 ++flag;
656 } else if (rio_table_ptr) {
657 if (rio_table_ptr->ver_num == 3) {
658 /* if both NULL and we DO have correct RIO table in BIOS */
659 return NULL;
662 if (!flag) {
663 if (slot_cur->ctrl->ctlr_type == 4) {
664 first_slot = calculate_first_slot (slot_num);
665 which = 1;
666 } else {
667 which = 0;
671 sprintf(str, "%s%dslot%d",
672 which == 0 ? "chassis" : "rxe",
673 number, slot_num - first_slot + 1);
674 return str;
677 static int fillslotinfo(struct hotplug_slot *hotplug_slot)
679 struct slot *slot;
680 int rc = 0;
682 if (!hotplug_slot || !hotplug_slot->private)
683 return -EINVAL;
685 slot = hotplug_slot->private;
686 rc = ibmphp_hpc_readslot(slot, READ_ALLSTAT, NULL);
687 if (rc)
688 return rc;
690 // power - enabled:1 not:0
691 hotplug_slot->info->power_status = SLOT_POWER(slot->status);
693 // attention - off:0, on:1, blinking:2
694 hotplug_slot->info->attention_status = SLOT_ATTN(slot->status, slot->ext_status);
696 // latch - open:1 closed:0
697 hotplug_slot->info->latch_status = SLOT_LATCH(slot->status);
699 // pci board - present:1 not:0
700 if (SLOT_PRESENT (slot->status))
701 hotplug_slot->info->adapter_status = 1;
702 else
703 hotplug_slot->info->adapter_status = 0;
705 if (slot->bus_on->supported_bus_mode
706 && (slot->bus_on->supported_speed == BUS_SPEED_66))
707 hotplug_slot->info->max_bus_speed_status = BUS_SPEED_66PCIX;
708 else
709 hotplug_slot->info->max_bus_speed_status = slot->bus_on->supported_speed;
712 return rc;
715 static void release_slot(struct hotplug_slot *hotplug_slot)
717 struct slot *slot;
719 if (!hotplug_slot || !hotplug_slot->private)
720 return;
722 slot = hotplug_slot->private;
723 kfree(slot->hotplug_slot->info);
724 kfree(slot->hotplug_slot);
725 slot->ctrl = NULL;
726 slot->bus_on = NULL;
728 /* we don't want to actually remove the resources, since free_resources will do just that */
729 ibmphp_unconfigure_card(&slot, -1);
731 kfree (slot);
734 static struct pci_driver ibmphp_driver;
737 * map info (ctlr-id, slot count, slot#.. bus count, bus#, ctlr type...) of
738 * each hpc from physical address to a list of hot plug controllers based on
739 * hpc descriptors.
741 static int __init ebda_rsrc_controller (void)
743 u16 addr, addr_slot, addr_bus;
744 u8 ctlr_id, temp, bus_index;
745 u16 ctlr, slot, bus;
746 u16 slot_num, bus_num, index;
747 struct hotplug_slot *hp_slot_ptr;
748 struct controller *hpc_ptr;
749 struct ebda_hpc_bus *bus_ptr;
750 struct ebda_hpc_slot *slot_ptr;
751 struct bus_info *bus_info_ptr1, *bus_info_ptr2;
752 int rc;
753 struct slot *tmp_slot;
754 char name[SLOT_NAME_SIZE];
756 addr = hpc_list_ptr->phys_addr;
757 for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) {
758 bus_index = 1;
759 ctlr_id = readb (io_mem + addr);
760 addr += 1;
761 slot_num = readb (io_mem + addr);
763 addr += 1;
764 addr_slot = addr; /* offset of slot structure */
765 addr += (slot_num * 4);
767 bus_num = readb (io_mem + addr);
769 addr += 1;
770 addr_bus = addr; /* offset of bus */
771 addr += (bus_num * 9); /* offset of ctlr_type */
772 temp = readb (io_mem + addr);
774 addr += 1;
775 /* init hpc structure */
776 hpc_ptr = alloc_ebda_hpc (slot_num, bus_num);
777 if (!hpc_ptr ) {
778 rc = -ENOMEM;
779 goto error_no_hpc;
781 hpc_ptr->ctlr_id = ctlr_id;
782 hpc_ptr->ctlr_relative_id = ctlr;
783 hpc_ptr->slot_count = slot_num;
784 hpc_ptr->bus_count = bus_num;
785 debug ("now enter ctlr data struture ---\n");
786 debug ("ctlr id: %x\n", ctlr_id);
787 debug ("ctlr_relative_id: %x\n", hpc_ptr->ctlr_relative_id);
788 debug ("count of slots controlled by this ctlr: %x\n", slot_num);
789 debug ("count of buses controlled by this ctlr: %x\n", bus_num);
791 /* init slot structure, fetch slot, bus, cap... */
792 slot_ptr = hpc_ptr->slots;
793 for (slot = 0; slot < slot_num; slot++) {
794 slot_ptr->slot_num = readb (io_mem + addr_slot);
795 slot_ptr->slot_bus_num = readb (io_mem + addr_slot + slot_num);
796 slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num);
797 slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num);
799 // create bus_info lined list --- if only one slot per bus: slot_min = slot_max
801 bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num);
802 if (!bus_info_ptr2) {
803 bus_info_ptr1 = kzalloc(sizeof(struct bus_info), GFP_KERNEL);
804 if (!bus_info_ptr1) {
805 rc = -ENOMEM;
806 goto error_no_hp_slot;
808 bus_info_ptr1->slot_min = slot_ptr->slot_num;
809 bus_info_ptr1->slot_max = slot_ptr->slot_num;
810 bus_info_ptr1->slot_count += 1;
811 bus_info_ptr1->busno = slot_ptr->slot_bus_num;
812 bus_info_ptr1->index = bus_index++;
813 bus_info_ptr1->current_speed = 0xff;
814 bus_info_ptr1->current_bus_mode = 0xff;
816 bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
818 list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head);
820 } else {
821 bus_info_ptr2->slot_min = min (bus_info_ptr2->slot_min, slot_ptr->slot_num);
822 bus_info_ptr2->slot_max = max (bus_info_ptr2->slot_max, slot_ptr->slot_num);
823 bus_info_ptr2->slot_count += 1;
827 // end of creating the bus_info linked list
829 slot_ptr++;
830 addr_slot += 1;
833 /* init bus structure */
834 bus_ptr = hpc_ptr->buses;
835 for (bus = 0; bus < bus_num; bus++) {
836 bus_ptr->bus_num = readb (io_mem + addr_bus + bus);
837 bus_ptr->slots_at_33_conv = readb (io_mem + addr_bus + bus_num + 8 * bus);
838 bus_ptr->slots_at_66_conv = readb (io_mem + addr_bus + bus_num + 8 * bus + 1);
840 bus_ptr->slots_at_66_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 2);
842 bus_ptr->slots_at_100_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 3);
844 bus_ptr->slots_at_133_pcix = readb (io_mem + addr_bus + bus_num + 8 * bus + 4);
846 bus_info_ptr2 = ibmphp_find_same_bus_num (bus_ptr->bus_num);
847 if (bus_info_ptr2) {
848 bus_info_ptr2->slots_at_33_conv = bus_ptr->slots_at_33_conv;
849 bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
850 bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
851 bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
852 bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
854 bus_ptr++;
857 hpc_ptr->ctlr_type = temp;
859 switch (hpc_ptr->ctlr_type) {
860 case 1:
861 hpc_ptr->u.pci_ctlr.bus = readb (io_mem + addr);
862 hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
863 hpc_ptr->irq = readb (io_mem + addr + 2);
864 addr += 3;
865 debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
866 hpc_ptr->u.pci_ctlr.bus,
867 hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
868 break;
870 case 0:
871 hpc_ptr->u.isa_ctlr.io_start = readw (io_mem + addr);
872 hpc_ptr->u.isa_ctlr.io_end = readw (io_mem + addr + 2);
873 if (!request_region (hpc_ptr->u.isa_ctlr.io_start,
874 (hpc_ptr->u.isa_ctlr.io_end - hpc_ptr->u.isa_ctlr.io_start + 1),
875 "ibmphp")) {
876 rc = -ENODEV;
877 goto error_no_hp_slot;
879 hpc_ptr->irq = readb (io_mem + addr + 4);
880 addr += 5;
881 break;
883 case 2:
884 case 4:
885 hpc_ptr->u.wpeg_ctlr.wpegbbar = readl (io_mem + addr);
886 hpc_ptr->u.wpeg_ctlr.i2c_addr = readb (io_mem + addr + 4);
887 hpc_ptr->irq = readb (io_mem + addr + 5);
888 addr += 6;
889 break;
890 default:
891 rc = -ENODEV;
892 goto error_no_hp_slot;
895 //reorganize chassis' linked list
896 combine_wpg_for_chassis ();
897 combine_wpg_for_expansion ();
898 hpc_ptr->revision = 0xff;
899 hpc_ptr->options = 0xff;
900 hpc_ptr->starting_slot_num = hpc_ptr->slots[0].slot_num;
901 hpc_ptr->ending_slot_num = hpc_ptr->slots[slot_num-1].slot_num;
903 // register slots with hpc core as well as create linked list of ibm slot
904 for (index = 0; index < hpc_ptr->slot_count; index++) {
906 hp_slot_ptr = kzalloc(sizeof(*hp_slot_ptr), GFP_KERNEL);
907 if (!hp_slot_ptr) {
908 rc = -ENOMEM;
909 goto error_no_hp_slot;
912 hp_slot_ptr->info = kzalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
913 if (!hp_slot_ptr->info) {
914 rc = -ENOMEM;
915 goto error_no_hp_info;
918 tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL);
919 if (!tmp_slot) {
920 rc = -ENOMEM;
921 goto error_no_slot;
924 tmp_slot->flag = 1;
926 tmp_slot->capabilities = hpc_ptr->slots[index].slot_cap;
927 if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_133_MAX) == EBDA_SLOT_133_MAX)
928 tmp_slot->supported_speed = 3;
929 else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_100_MAX) == EBDA_SLOT_100_MAX)
930 tmp_slot->supported_speed = 2;
931 else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
932 tmp_slot->supported_speed = 1;
934 if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
935 tmp_slot->supported_bus_mode = 1;
936 else
937 tmp_slot->supported_bus_mode = 0;
940 tmp_slot->bus = hpc_ptr->slots[index].slot_bus_num;
942 bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num);
943 if (!bus_info_ptr1) {
944 kfree(tmp_slot);
945 rc = -ENODEV;
946 goto error;
948 tmp_slot->bus_on = bus_info_ptr1;
949 bus_info_ptr1 = NULL;
950 tmp_slot->ctrl = hpc_ptr;
952 tmp_slot->ctlr_index = hpc_ptr->slots[index].ctl_index;
953 tmp_slot->number = hpc_ptr->slots[index].slot_num;
954 tmp_slot->hotplug_slot = hp_slot_ptr;
956 hp_slot_ptr->private = tmp_slot;
957 hp_slot_ptr->release = release_slot;
959 rc = fillslotinfo(hp_slot_ptr);
960 if (rc)
961 goto error;
963 rc = ibmphp_init_devno ((struct slot **) &hp_slot_ptr->private);
964 if (rc)
965 goto error;
966 hp_slot_ptr->ops = &ibmphp_hotplug_slot_ops;
968 // end of registering ibm slot with hotplug core
970 list_add (& ((struct slot *)(hp_slot_ptr->private))->ibm_slot_list, &ibmphp_slot_head);
973 print_bus_info ();
974 list_add (&hpc_ptr->ebda_hpc_list, &ebda_hpc_head );
976 } /* each hpc */
978 list_for_each_entry(tmp_slot, &ibmphp_slot_head, ibm_slot_list) {
979 snprintf(name, SLOT_NAME_SIZE, "%s", create_file_name(tmp_slot));
980 pci_hp_register(tmp_slot->hotplug_slot,
981 pci_find_bus(0, tmp_slot->bus), tmp_slot->device, name);
984 print_ebda_hpc ();
985 print_ibm_slot ();
986 return 0;
988 error:
989 kfree (hp_slot_ptr->private);
990 error_no_slot:
991 kfree (hp_slot_ptr->info);
992 error_no_hp_info:
993 kfree (hp_slot_ptr);
994 error_no_hp_slot:
995 free_ebda_hpc (hpc_ptr);
996 error_no_hpc:
997 iounmap (io_mem);
998 return rc;
1002 * map info (bus, devfun, start addr, end addr..) of i/o, memory,
1003 * pfm from the physical addr to a list of resource.
1005 static int __init ebda_rsrc_rsrc (void)
1007 u16 addr;
1008 short rsrc;
1009 u8 type, rsrc_type;
1010 struct ebda_pci_rsrc *rsrc_ptr;
1012 addr = rsrc_list_ptr->phys_addr;
1013 debug ("now entering rsrc land\n");
1014 debug ("offset of rsrc: %x\n", rsrc_list_ptr->phys_addr);
1016 for (rsrc = 0; rsrc < rsrc_list_ptr->num_entries; rsrc++) {
1017 type = readb (io_mem + addr);
1019 addr += 1;
1020 rsrc_type = type & EBDA_RSRC_TYPE_MASK;
1022 if (rsrc_type == EBDA_IO_RSRC_TYPE) {
1023 rsrc_ptr = alloc_ebda_pci_rsrc ();
1024 if (!rsrc_ptr) {
1025 iounmap (io_mem);
1026 return -ENOMEM;
1028 rsrc_ptr->rsrc_type = type;
1030 rsrc_ptr->bus_num = readb (io_mem + addr);
1031 rsrc_ptr->dev_fun = readb (io_mem + addr + 1);
1032 rsrc_ptr->start_addr = readw (io_mem + addr + 2);
1033 rsrc_ptr->end_addr = readw (io_mem + addr + 4);
1034 addr += 6;
1036 debug ("rsrc from io type ----\n");
1037 debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
1038 rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
1040 list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
1043 if (rsrc_type == EBDA_MEM_RSRC_TYPE || rsrc_type == EBDA_PFM_RSRC_TYPE) {
1044 rsrc_ptr = alloc_ebda_pci_rsrc ();
1045 if (!rsrc_ptr ) {
1046 iounmap (io_mem);
1047 return -ENOMEM;
1049 rsrc_ptr->rsrc_type = type;
1051 rsrc_ptr->bus_num = readb (io_mem + addr);
1052 rsrc_ptr->dev_fun = readb (io_mem + addr + 1);
1053 rsrc_ptr->start_addr = readl (io_mem + addr + 2);
1054 rsrc_ptr->end_addr = readl (io_mem + addr + 6);
1055 addr += 10;
1057 debug ("rsrc from mem or pfm ---\n");
1058 debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
1059 rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
1061 list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
1064 kfree (rsrc_list_ptr);
1065 rsrc_list_ptr = NULL;
1066 print_ebda_pci_rsrc ();
1067 return 0;
1070 u16 ibmphp_get_total_controllers (void)
1072 return hpc_list_ptr->num_ctlrs;
1075 struct slot *ibmphp_get_slot_from_physical_num (u8 physical_num)
1077 struct slot *slot;
1079 list_for_each_entry(slot, &ibmphp_slot_head, ibm_slot_list) {
1080 if (slot->number == physical_num)
1081 return slot;
1083 return NULL;
1086 /* To find:
1087 * - the smallest slot number
1088 * - the largest slot number
1089 * - the total number of the slots based on each bus
1090 * (if only one slot per bus slot_min = slot_max )
1092 struct bus_info *ibmphp_find_same_bus_num (u32 num)
1094 struct bus_info *ptr;
1096 list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
1097 if (ptr->busno == num)
1098 return ptr;
1100 return NULL;
1103 /* Finding relative bus number, in order to map corresponding
1104 * bus register
1106 int ibmphp_get_bus_index (u8 num)
1108 struct bus_info *ptr;
1110 list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
1111 if (ptr->busno == num)
1112 return ptr->index;
1114 return -ENODEV;
1117 void ibmphp_free_bus_info_queue (void)
1119 struct bus_info *bus_info;
1120 struct list_head *list;
1121 struct list_head *next;
1123 list_for_each_safe (list, next, &bus_info_head ) {
1124 bus_info = list_entry (list, struct bus_info, bus_info_list);
1125 kfree (bus_info);
1129 void ibmphp_free_ebda_hpc_queue (void)
1131 struct controller *controller = NULL;
1132 struct list_head *list;
1133 struct list_head *next;
1134 int pci_flag = 0;
1136 list_for_each_safe (list, next, &ebda_hpc_head) {
1137 controller = list_entry (list, struct controller, ebda_hpc_list);
1138 if (controller->ctlr_type == 0)
1139 release_region (controller->u.isa_ctlr.io_start, (controller->u.isa_ctlr.io_end - controller->u.isa_ctlr.io_start + 1));
1140 else if ((controller->ctlr_type == 1) && (!pci_flag)) {
1141 ++pci_flag;
1142 pci_unregister_driver (&ibmphp_driver);
1144 free_ebda_hpc (controller);
1148 void ibmphp_free_ebda_pci_rsrc_queue (void)
1150 struct ebda_pci_rsrc *resource;
1151 struct list_head *list;
1152 struct list_head *next;
1154 list_for_each_safe (list, next, &ibmphp_ebda_pci_rsrc_head) {
1155 resource = list_entry (list, struct ebda_pci_rsrc, ebda_pci_rsrc_list);
1156 kfree (resource);
1157 resource = NULL;
1161 static struct pci_device_id id_table[] = {
1163 .vendor = PCI_VENDOR_ID_IBM,
1164 .device = HPC_DEVICE_ID,
1165 .subvendor = PCI_VENDOR_ID_IBM,
1166 .subdevice = HPC_SUBSYSTEM_ID,
1167 .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
1168 }, {}
1171 MODULE_DEVICE_TABLE(pci, id_table);
1173 static int ibmphp_probe (struct pci_dev *, const struct pci_device_id *);
1174 static struct pci_driver ibmphp_driver = {
1175 .name = "ibmphp",
1176 .id_table = id_table,
1177 .probe = ibmphp_probe,
1180 int ibmphp_register_pci (void)
1182 struct controller *ctrl;
1183 int rc = 0;
1185 list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
1186 if (ctrl->ctlr_type == 1) {
1187 rc = pci_register_driver(&ibmphp_driver);
1188 break;
1191 return rc;
1193 static int ibmphp_probe (struct pci_dev * dev, const struct pci_device_id *ids)
1195 struct controller *ctrl;
1197 debug ("inside ibmphp_probe\n");
1199 list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
1200 if (ctrl->ctlr_type == 1) {
1201 if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) {
1202 ctrl->ctrl_dev = dev;
1203 debug ("found device!!!\n");
1204 debug ("dev->device = %x, dev->subsystem_device = %x\n", dev->device, dev->subsystem_device);
1205 return 0;
1209 return -ENODEV;