spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
[zen-stable.git] / drivers / pcmcia / pxa2xx_cm_x270.c
blob3dc7621a076701a843fe0722d0340db703830fa8
1 /*
2 * linux/drivers/pcmcia/pxa/pxa_cm_x270.c
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
8 * Compulab Ltd., 2003, 2007, 2008
9 * Mike Rapoport <mike@compulab.co.il>
13 #include <linux/platform_device.h>
14 #include <linux/irq.h>
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/export.h>
19 #include "soc_common.h"
21 #define GPIO_PCMCIA_S0_CD_VALID (84)
22 #define GPIO_PCMCIA_S0_RDYINT (82)
23 #define GPIO_PCMCIA_RESET (53)
25 #define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
26 #define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
29 static struct pcmcia_irqs irqs[] = {
30 { .sock = 0, .str = "PCMCIA0 CD" },
33 static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
35 int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
36 if (ret)
37 return ret;
38 gpio_direction_output(GPIO_PCMCIA_RESET, 0);
40 skt->socket.pci_irq = PCMCIA_S0_RDYINT;
41 irqs[0].irq = PCMCIA_S0_CD_VALID;
42 ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
43 if (!ret)
44 gpio_free(GPIO_PCMCIA_RESET);
46 return ret;
49 static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
51 soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
52 gpio_free(GPIO_PCMCIA_RESET);
56 static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
57 struct pcmcia_state *state)
59 state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
60 state->ready = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
61 state->bvd1 = 1;
62 state->bvd2 = 1;
63 state->vs_3v = 0;
64 state->vs_Xv = 0;
65 state->wrprot = 0; /* not available */
69 static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
70 const socket_state_t *state)
72 switch (skt->nr) {
73 case 0:
74 if (state->flags & SS_RESET) {
75 gpio_set_value(GPIO_PCMCIA_RESET, 1);
76 udelay(10);
77 gpio_set_value(GPIO_PCMCIA_RESET, 0);
79 break;
82 return 0;
85 static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
86 .owner = THIS_MODULE,
87 .hw_init = cmx270_pcmcia_hw_init,
88 .hw_shutdown = cmx270_pcmcia_shutdown,
89 .socket_state = cmx270_pcmcia_socket_state,
90 .configure_socket = cmx270_pcmcia_configure_socket,
91 .nr = 1,
94 static struct platform_device *cmx270_pcmcia_device;
96 int __init cmx270_pcmcia_init(void)
98 int ret;
100 cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
102 if (!cmx270_pcmcia_device)
103 return -ENOMEM;
105 ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops,
106 sizeof(cmx270_pcmcia_ops));
108 if (ret == 0) {
109 printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
110 ret = platform_device_add(cmx270_pcmcia_device);
113 if (ret)
114 platform_device_put(cmx270_pcmcia_device);
116 return ret;
119 void __exit cmx270_pcmcia_exit(void)
121 platform_device_unregister(cmx270_pcmcia_device);