Merge branch 'for-next/gadget' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi...

[zen-stable.git] / arch / x86 / kernel / nmi.c

/*
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *  Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
 *  Copyright (C) 2011  Don Zickus Red Hat, Inc.
 *
 *  Pentium III FXSR, SSE support
 *      Gareth Hughes <gareth@valinux.com>, May 2000
 */

/*
 * Handle hardware traps and faults.
 */
#include <linux/spinlock.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
#include <linux/slab.h>
#include <linux/export.h>

#include <linux/mca.h>

#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif

#include <linux/atomic.h>
#include <asm/traps.h>
#include <asm/mach_traps.h>
#include <asm/nmi.h>
#include <asm/x86_init.h>

#define NMI_MAX_NAMELEN 16
struct nmiaction {
        struct list_head list;
        nmi_handler_t handler;
        unsigned int flags;
        char *name;
};

struct nmi_desc {
        spinlock_t lock;
        struct list_head head;
};

static struct nmi_desc nmi_desc[NMI_MAX] = 
{
        {
                .lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[0].lock),
                .head = LIST_HEAD_INIT(nmi_desc[0].head),
        },
        {
                .lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[1].lock),
                .head = LIST_HEAD_INIT(nmi_desc[1].head),
        },

};

struct nmi_stats {
        unsigned int normal;
        unsigned int unknown;
        unsigned int external;
        unsigned int swallow;
};

static DEFINE_PER_CPU(struct nmi_stats, nmi_stats);

static int ignore_nmis;

int unknown_nmi_panic;
/*
 * Prevent NMI reason port (0x61) being accessed simultaneously, can
 * only be used in NMI handler.
 */
static DEFINE_RAW_SPINLOCK(nmi_reason_lock);

static int __init setup_unknown_nmi_panic(char *str)
{
        unknown_nmi_panic = 1;
        return 1;
}
__setup("unknown_nmi_panic", setup_unknown_nmi_panic);

#define nmi_to_desc(type) (&nmi_desc[type])

static int notrace __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2b)
{
        struct nmi_desc *desc = nmi_to_desc(type);
        struct nmiaction *a;
        int handled=0;

        rcu_read_lock();

        /*
         * NMIs are edge-triggered, which means if you have enough
         * of them concurrently, you can lose some because only one
         * can be latched at any given time.  Walk the whole list
         * to handle those situations.
         */
        list_for_each_entry_rcu(a, &desc->head, list)
                handled += a->handler(type, regs);

        rcu_read_unlock();

        /* return total number of NMI events handled */
        return handled;
}

static int __setup_nmi(unsigned int type, struct nmiaction *action)
{
        struct nmi_desc *desc = nmi_to_desc(type);
        unsigned long flags;

        spin_lock_irqsave(&desc->lock, flags);

        /*
         * most handlers of type NMI_UNKNOWN never return because
         * they just assume the NMI is theirs.  Just a sanity check
         * to manage expectations
         */
        WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head));

        /*
         * some handlers need to be executed first otherwise a fake
         * event confuses some handlers (kdump uses this flag)
         */
        if (action->flags & NMI_FLAG_FIRST)
                list_add_rcu(&action->list, &desc->head);
        else
                list_add_tail_rcu(&action->list, &desc->head);
        
        spin_unlock_irqrestore(&desc->lock, flags);
        return 0;
}

static struct nmiaction *__free_nmi(unsigned int type, const char *name)
{
        struct nmi_desc *desc = nmi_to_desc(type);
        struct nmiaction *n;
        unsigned long flags;

        spin_lock_irqsave(&desc->lock, flags);

        list_for_each_entry_rcu(n, &desc->head, list) {
                /*
                 * the name passed in to describe the nmi handler
                 * is used as the lookup key
                 */
                if (!strcmp(n->name, name)) {
                        WARN(in_nmi(),
                                "Trying to free NMI (%s) from NMI context!\n", n->name);
                        list_del_rcu(&n->list);
                        break;
                }
        }

        spin_unlock_irqrestore(&desc->lock, flags);
        synchronize_rcu();
        return (n);
}

int register_nmi_handler(unsigned int type, nmi_handler_t handler,
                        unsigned long nmiflags, const char *devname)
{
        struct nmiaction *action;
        int retval = -ENOMEM;

        if (!handler)
                return -EINVAL;

        action = kzalloc(sizeof(struct nmiaction), GFP_KERNEL);
        if (!action)
                goto fail_action;

        action->handler = handler;
        action->flags = nmiflags;
        action->name = kstrndup(devname, NMI_MAX_NAMELEN, GFP_KERNEL);
        if (!action->name)
                goto fail_action_name;

        retval = __setup_nmi(type, action);

        if (retval)
                goto fail_setup_nmi;

        return retval;

fail_setup_nmi:
        kfree(action->name);
fail_action_name:
        kfree(action);
fail_action:    

        return retval;
}
EXPORT_SYMBOL_GPL(register_nmi_handler);

void unregister_nmi_handler(unsigned int type, const char *name)
{
        struct nmiaction *a;

        a = __free_nmi(type, name);
        if (a) {
                kfree(a->name);
                kfree(a);
        }
}

EXPORT_SYMBOL_GPL(unregister_nmi_handler);

static notrace __kprobes void
pci_serr_error(unsigned char reason, struct pt_regs *regs)
{
        pr_emerg("NMI: PCI system error (SERR) for reason %02x on CPU %d.\n",
                 reason, smp_processor_id());

        /*
         * On some machines, PCI SERR line is used to report memory
         * errors. EDAC makes use of it.
         */
#if defined(CONFIG_EDAC)
        if (edac_handler_set()) {
                edac_atomic_assert_error();
                return;
        }
#endif

        if (panic_on_unrecovered_nmi)
                panic("NMI: Not continuing");

        pr_emerg("Dazed and confused, but trying to continue\n");

        /* Clear and disable the PCI SERR error line. */
        reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_SERR;
        outb(reason, NMI_REASON_PORT);
}

static notrace __kprobes void
io_check_error(unsigned char reason, struct pt_regs *regs)
{
        unsigned long i;

        pr_emerg(
        "NMI: IOCK error (debug interrupt?) for reason %02x on CPU %d.\n",
                 reason, smp_processor_id());
        show_registers(regs);

        if (panic_on_io_nmi)
                panic("NMI IOCK error: Not continuing");

        /* Re-enable the IOCK line, wait for a few seconds */
        reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_IOCHK;
        outb(reason, NMI_REASON_PORT);

        i = 20000;
        while (--i) {
                touch_nmi_watchdog();
                udelay(100);
        }

        reason &= ~NMI_REASON_CLEAR_IOCHK;
        outb(reason, NMI_REASON_PORT);
}

static notrace __kprobes void
unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
{
        int handled;

        /*
         * Use 'false' as back-to-back NMIs are dealt with one level up.
         * Of course this makes having multiple 'unknown' handlers useless
         * as only the first one is ever run (unless it can actually determine
         * if it caused the NMI)
         */
        handled = nmi_handle(NMI_UNKNOWN, regs, false);
        if (handled) {
                __this_cpu_add(nmi_stats.unknown, handled);
                return;
        }

        __this_cpu_add(nmi_stats.unknown, 1);

#ifdef CONFIG_MCA
        /*
         * Might actually be able to figure out what the guilty party
         * is:
         */
        if (MCA_bus) {
                mca_handle_nmi();
                return;
        }
#endif
        pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
                 reason, smp_processor_id());

        pr_emerg("Do you have a strange power saving mode enabled?\n");
        if (unknown_nmi_panic || panic_on_unrecovered_nmi)
                panic("NMI: Not continuing");

        pr_emerg("Dazed and confused, but trying to continue\n");
}

static DEFINE_PER_CPU(bool, swallow_nmi);
static DEFINE_PER_CPU(unsigned long, last_nmi_rip);

static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
{
        unsigned char reason = 0;
        int handled;
        bool b2b = false;

        /*
         * CPU-specific NMI must be processed before non-CPU-specific
         * NMI, otherwise we may lose it, because the CPU-specific
         * NMI can not be detected/processed on other CPUs.
         */

        /*
         * Back-to-back NMIs are interesting because they can either
         * be two NMI or more than two NMIs (any thing over two is dropped
         * due to NMI being edge-triggered).  If this is the second half
         * of the back-to-back NMI, assume we dropped things and process
         * more handlers.  Otherwise reset the 'swallow' NMI behaviour
         */
        if (regs->ip == __this_cpu_read(last_nmi_rip))
                b2b = true;
        else
                __this_cpu_write(swallow_nmi, false);

        __this_cpu_write(last_nmi_rip, regs->ip);

        handled = nmi_handle(NMI_LOCAL, regs, b2b);
        __this_cpu_add(nmi_stats.normal, handled);
        if (handled) {
                /*
                 * There are cases when a NMI handler handles multiple
                 * events in the current NMI.  One of these events may
                 * be queued for in the next NMI.  Because the event is
                 * already handled, the next NMI will result in an unknown
                 * NMI.  Instead lets flag this for a potential NMI to
                 * swallow.
                 */
                if (handled > 1)
                        __this_cpu_write(swallow_nmi, true);
                return;
        }

        /* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
        raw_spin_lock(&nmi_reason_lock);
        reason = x86_platform.get_nmi_reason();

        if (reason & NMI_REASON_MASK) {
                if (reason & NMI_REASON_SERR)
                        pci_serr_error(reason, regs);
                else if (reason & NMI_REASON_IOCHK)
                        io_check_error(reason, regs);
#ifdef CONFIG_X86_32
                /*
                 * Reassert NMI in case it became active
                 * meanwhile as it's edge-triggered:
                 */
                reassert_nmi();
#endif
                __this_cpu_add(nmi_stats.external, 1);
                raw_spin_unlock(&nmi_reason_lock);
                return;
        }
        raw_spin_unlock(&nmi_reason_lock);

        /*
         * Only one NMI can be latched at a time.  To handle
         * this we may process multiple nmi handlers at once to
         * cover the case where an NMI is dropped.  The downside
         * to this approach is we may process an NMI prematurely,
         * while its real NMI is sitting latched.  This will cause
         * an unknown NMI on the next run of the NMI processing.
         *
         * We tried to flag that condition above, by setting the
         * swallow_nmi flag when we process more than one event.
         * This condition is also only present on the second half
         * of a back-to-back NMI, so we flag that condition too.
         *
         * If both are true, we assume we already processed this
         * NMI previously and we swallow it.  Otherwise we reset
         * the logic.
         *
         * There are scenarios where we may accidentally swallow
         * a 'real' unknown NMI.  For example, while processing
         * a perf NMI another perf NMI comes in along with a
         * 'real' unknown NMI.  These two NMIs get combined into
         * one (as descibed above).  When the next NMI gets
         * processed, it will be flagged by perf as handled, but
         * noone will know that there was a 'real' unknown NMI sent
         * also.  As a result it gets swallowed.  Or if the first
         * perf NMI returns two events handled then the second
         * NMI will get eaten by the logic below, again losing a
         * 'real' unknown NMI.  But this is the best we can do
         * for now.
         */
        if (b2b && __this_cpu_read(swallow_nmi))
                __this_cpu_add(nmi_stats.swallow, 1);
        else
                unknown_nmi_error(reason, regs);
}

dotraplinkage notrace __kprobes void
do_nmi(struct pt_regs *regs, long error_code)
{
        nmi_enter();

        inc_irq_stat(__nmi_count);

        if (!ignore_nmis)
                default_do_nmi(regs);

        nmi_exit();
}

void stop_nmi(void)
{
        ignore_nmis++;
}

void restart_nmi(void)
{
        ignore_nmis--;
}

/* reset the back-to-back NMI logic */
void local_touch_nmi(void)
{
        __this_cpu_write(last_nmi_rip, 0);
}