?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
staging: usbip: bugfix for isochronous packets and optimization
[zen-stable.git] / drivers / scsi / qla2xxx / qla_fw.h
blob631fefc8482dc40d424846497ba4c4554ef6bd48
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2010 QLogic Corporation
4 *
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
7 #ifndef __QLA_FW_H
8 #define __QLA_FW_H
9
10 #define MBS_CHECKSUM_ERROR 0x4010
11 #define MBS_INVALID_PRODUCT_KEY 0x4020
12
13 /*
14 * Firmware Options.
15 */
16 #define FO1_ENABLE_PUREX BIT_10
17 #define FO1_DISABLE_LED_CTRL BIT_6
18 #define FO1_ENABLE_8016 BIT_0
19 #define FO2_ENABLE_SEL_CLASS2 BIT_5
20 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14
21 #define FO3_HOLD_STS_IOCB BIT_12
22
23 /*
24 * Port Database structure definition for ISP 24xx.
25 */
26 #define PDO_FORCE_ADISC BIT_1
27 #define PDO_FORCE_PLOGI BIT_0
28
29
30 #define PORT_DATABASE_24XX_SIZE 64
31 struct port_database_24xx {
32 uint16_t flags;
33 #define PDF_TASK_RETRY_ID BIT_14
34 #define PDF_FC_TAPE BIT_7
35 #define PDF_ACK0_CAPABLE BIT_6
36 #define PDF_FCP2_CONF BIT_5
37 #define PDF_CLASS_2 BIT_4
38 #define PDF_HARD_ADDR BIT_1
39
40 uint8_t current_login_state;
41 uint8_t last_login_state;
42 #define PDS_PLOGI_PENDING 0x03
43 #define PDS_PLOGI_COMPLETE 0x04
44 #define PDS_PRLI_PENDING 0x05
45 #define PDS_PRLI_COMPLETE 0x06
46 #define PDS_PORT_UNAVAILABLE 0x07
47 #define PDS_PRLO_PENDING 0x09
48 #define PDS_LOGO_PENDING 0x11
49 #define PDS_PRLI2_PENDING 0x12
50
51 uint8_t hard_address[3];
52 uint8_t reserved_1;
53
54 uint8_t port_id[3];
55 uint8_t sequence_id;
56
57 uint16_t port_timer;
58
59 uint16_t nport_handle; /* N_PORT handle. */
60
61 uint16_t receive_data_size;
62 uint16_t reserved_2;
63
64 uint8_t prli_svc_param_word_0[2]; /* Big endian */
65 /* Bits 15-0 of word 0 */
66 uint8_t prli_svc_param_word_3[2]; /* Big endian */
67 /* Bits 15-0 of word 3 */
68
69 uint8_t port_name[WWN_SIZE];
70 uint8_t node_name[WWN_SIZE];
71
72 uint8_t reserved_3[24];
73 };
74
75 struct vp_database_24xx {
76 uint16_t vp_status;
77 uint8_t options;
78 uint8_t id;
79 uint8_t port_name[WWN_SIZE];
80 uint8_t node_name[WWN_SIZE];
81 uint16_t port_id_low;
82 uint16_t port_id_high;
83 };
84
85 struct nvram_24xx {
86 /* NVRAM header. */
87 uint8_t id[4];
88 uint16_t nvram_version;
89 uint16_t reserved_0;
90
91 /* Firmware Initialization Control Block. */
92 uint16_t version;
93 uint16_t reserved_1;
94 uint16_t frame_payload_size;
95 uint16_t execution_throttle;
96 uint16_t exchange_count;
97 uint16_t hard_address;
98
99 uint8_t port_name[WWN_SIZE];
100 uint8_t node_name[WWN_SIZE];
101
102 uint16_t login_retry_count;
103 uint16_t link_down_on_nos;
104 uint16_t interrupt_delay_timer;
105 uint16_t login_timeout;
106
107 uint32_t firmware_options_1;
108 uint32_t firmware_options_2;
109 uint32_t firmware_options_3;
110
111 /* Offset 56. */
112
113 /*
114 * BIT 0 = Control Enable
115 * BIT 1-15 =
116 *
117 * BIT 0-7 = Reserved
118 * BIT 8-10 = Output Swing 1G
119 * BIT 11-13 = Output Emphasis 1G
120 * BIT 14-15 = Reserved
121 *
122 * BIT 0-7 = Reserved
123 * BIT 8-10 = Output Swing 2G
124 * BIT 11-13 = Output Emphasis 2G
125 * BIT 14-15 = Reserved
126 *
127 * BIT 0-7 = Reserved
128 * BIT 8-10 = Output Swing 4G
129 * BIT 11-13 = Output Emphasis 4G
130 * BIT 14-15 = Reserved
131 */
132 uint16_t seriallink_options[4];
133
134 uint16_t reserved_2[16];
135
136 /* Offset 96. */
137 uint16_t reserved_3[16];
138
139 /* PCIe table entries. */
140 uint16_t reserved_4[16];
141
142 /* Offset 160. */
143 uint16_t reserved_5[16];
144
145 /* Offset 192. */
146 uint16_t reserved_6[16];
147
148 /* Offset 224. */
149 uint16_t reserved_7[16];
150
151 /*
152 * BIT 0 = Enable spinup delay
153 * BIT 1 = Disable BIOS
154 * BIT 2 = Enable Memory Map BIOS
155 * BIT 3 = Enable Selectable Boot
156 * BIT 4 = Disable RISC code load
157 * BIT 5 = Disable Serdes
158 * BIT 6 =
159 * BIT 7 =
160 *
161 * BIT 8 =
162 * BIT 9 =
163 * BIT 10 = Enable lip full login
164 * BIT 11 = Enable target reset
165 * BIT 12 =
166 * BIT 13 =
167 * BIT 14 =
168 * BIT 15 = Enable alternate WWN
169 *
170 * BIT 16-31 =
171 */
172 uint32_t host_p;
173
174 uint8_t alternate_port_name[WWN_SIZE];
175 uint8_t alternate_node_name[WWN_SIZE];
176
177 uint8_t boot_port_name[WWN_SIZE];
178 uint16_t boot_lun_number;
179 uint16_t reserved_8;
180
181 uint8_t alt1_boot_port_name[WWN_SIZE];
182 uint16_t alt1_boot_lun_number;
183 uint16_t reserved_9;
184
185 uint8_t alt2_boot_port_name[WWN_SIZE];
186 uint16_t alt2_boot_lun_number;
187 uint16_t reserved_10;
188
189 uint8_t alt3_boot_port_name[WWN_SIZE];
190 uint16_t alt3_boot_lun_number;
191 uint16_t reserved_11;
192
193 /*
194 * BIT 0 = Selective Login
195 * BIT 1 = Alt-Boot Enable
196 * BIT 2 = Reserved
197 * BIT 3 = Boot Order List
198 * BIT 4 = Reserved
199 * BIT 5 = Selective LUN
200 * BIT 6 = Reserved
201 * BIT 7-31 =
202 */
203 uint32_t efi_parameters;
204
205 uint8_t reset_delay;
206 uint8_t reserved_12;
207 uint16_t reserved_13;
208
209 uint16_t boot_id_number;
210 uint16_t reserved_14;
211
212 uint16_t max_luns_per_target;
213 uint16_t reserved_15;
214
215 uint16_t port_down_retry_count;
216 uint16_t link_down_timeout;
217
218 /* FCode parameters. */
219 uint16_t fcode_parameter;
220
221 uint16_t reserved_16[3];
222
223 /* Offset 352. */
224 uint8_t prev_drv_ver_major;
225 uint8_t prev_drv_ver_submajob;
226 uint8_t prev_drv_ver_minor;
227 uint8_t prev_drv_ver_subminor;
228
229 uint16_t prev_bios_ver_major;
230 uint16_t prev_bios_ver_minor;
231
232 uint16_t prev_efi_ver_major;
233 uint16_t prev_efi_ver_minor;
234
235 uint16_t prev_fw_ver_major;
236 uint8_t prev_fw_ver_minor;
237 uint8_t prev_fw_ver_subminor;
238
239 uint16_t reserved_17[8];
240
241 /* Offset 384. */
242 uint16_t reserved_18[16];
243
244 /* Offset 416. */
245 uint16_t reserved_19[16];
246
247 /* Offset 448. */
248 uint16_t reserved_20[16];
249
250 /* Offset 480. */
251 uint8_t model_name[16];
252
253 uint16_t reserved_21[2];
254
255 /* Offset 500. */
256 /* HW Parameter Block. */
257 uint16_t pcie_table_sig;
258 uint16_t pcie_table_offset;
259
260 uint16_t subsystem_vendor_id;
261 uint16_t subsystem_device_id;
262
263 uint32_t checksum;
264 };
265
266 /*
267 * ISP Initialization Control Block.
268 * Little endian except where noted.
269 */
270 #define ICB_VERSION 1
271 struct init_cb_24xx {
272 uint16_t version;
273 uint16_t reserved_1;
274
275 uint16_t frame_payload_size;
276 uint16_t execution_throttle;
277 uint16_t exchange_count;
278
279 uint16_t hard_address;
280
281 uint8_t port_name[WWN_SIZE]; /* Big endian. */
282 uint8_t node_name[WWN_SIZE]; /* Big endian. */
283
284 uint16_t response_q_inpointer;
285 uint16_t request_q_outpointer;
286
287 uint16_t login_retry_count;
288
289 uint16_t prio_request_q_outpointer;
290
291 uint16_t response_q_length;
292 uint16_t request_q_length;
293
294 uint16_t link_down_on_nos; /* Milliseconds. */
295
296 uint16_t prio_request_q_length;
297
298 uint32_t request_q_address[2];
299 uint32_t response_q_address[2];
300 uint32_t prio_request_q_address[2];
301
302 uint16_t msix;
303 uint8_t reserved_2[6];
304
305 uint16_t atio_q_inpointer;
306 uint16_t atio_q_length;
307 uint32_t atio_q_address[2];
308
309 uint16_t interrupt_delay_timer; /* 100us increments. */
310 uint16_t login_timeout;
311
312 /*
313 * BIT 0 = Enable Hard Loop Id
314 * BIT 1 = Enable Fairness
315 * BIT 2 = Enable Full-Duplex
316 * BIT 3 = Reserved
317 * BIT 4 = Enable Target Mode
318 * BIT 5 = Disable Initiator Mode
319 * BIT 6 = Reserved
320 * BIT 7 = Reserved
321 *
322 * BIT 8 = Reserved
323 * BIT 9 = Non Participating LIP
324 * BIT 10 = Descending Loop ID Search
325 * BIT 11 = Acquire Loop ID in LIPA
326 * BIT 12 = Reserved
327 * BIT 13 = Full Login after LIP
328 * BIT 14 = Node Name Option
329 * BIT 15-31 = Reserved
330 */
331 uint32_t firmware_options_1;
332
333 /*
334 * BIT 0 = Operation Mode bit 0
335 * BIT 1 = Operation Mode bit 1
336 * BIT 2 = Operation Mode bit 2
337 * BIT 3 = Operation Mode bit 3
338 * BIT 4 = Connection Options bit 0
339 * BIT 5 = Connection Options bit 1
340 * BIT 6 = Connection Options bit 2
341 * BIT 7 = Enable Non part on LIHA failure
342 *
343 * BIT 8 = Enable Class 2
344 * BIT 9 = Enable ACK0
345 * BIT 10 = Reserved
346 * BIT 11 = Enable FC-SP Security
347 * BIT 12 = FC Tape Enable
348 * BIT 13 = Reserved
349 * BIT 14 = Enable Target PRLI Control
350 * BIT 15-31 = Reserved
351 */
352 uint32_t firmware_options_2;
353
354 /*
355 * BIT 0 = Reserved
356 * BIT 1 = Soft ID only
357 * BIT 2 = Reserved
358 * BIT 3 = Reserved
359 * BIT 4 = FCP RSP Payload bit 0
360 * BIT 5 = FCP RSP Payload bit 1
361 * BIT 6 = Enable Receive Out-of-Order data frame handling
362 * BIT 7 = Disable Automatic PLOGI on Local Loop
363 *
364 * BIT 8 = Reserved
365 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling
366 * BIT 10 = Reserved
367 * BIT 11 = Reserved
368 * BIT 12 = Reserved
369 * BIT 13 = Data Rate bit 0
370 * BIT 14 = Data Rate bit 1
371 * BIT 15 = Data Rate bit 2
372 * BIT 16 = Enable 75 ohm Termination Select
373 * BIT 17-31 = Reserved
374 */
375 uint32_t firmware_options_3;
376 uint16_t qos;
377 uint16_t rid;
378 uint8_t reserved_3[20];
379 };
380
381 /*
382 * ISP queue - command entry structure definition.
383 */
384 #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */
385 struct cmd_type_6 {
386 uint8_t entry_type; /* Entry type. */
387 uint8_t entry_count; /* Entry count. */
388 uint8_t sys_define; /* System defined. */
389 uint8_t entry_status; /* Entry Status. */
390
391 uint32_t handle; /* System handle. */
392
393 uint16_t nport_handle; /* N_PORT handle. */
394 uint16_t timeout; /* Command timeout. */
395
396 uint16_t dseg_count; /* Data segment count. */
397
398 uint16_t fcp_rsp_dsd_len; /* FCP_RSP DSD length. */
399
400 struct scsi_lun lun; /* FCP LUN (BE). */
401
402 uint16_t control_flags; /* Control flags. */
403 #define CF_DIF_SEG_DESCR_ENABLE BIT_3
404 #define CF_DATA_SEG_DESCR_ENABLE BIT_2
405 #define CF_READ_DATA BIT_1
406 #define CF_WRITE_DATA BIT_0
407
408 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */
409 uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */
410
411 uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */
412
413 uint32_t byte_count; /* Total byte count. */
414
415 uint8_t port_id[3]; /* PortID of destination port. */
416 uint8_t vp_index;
417
418 uint32_t fcp_data_dseg_address[2]; /* Data segment address. */
419 uint16_t fcp_data_dseg_len; /* Data segment length. */
420 uint16_t reserved_1; /* MUST be set to 0. */
421 };
422
423 #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */
424 struct cmd_type_7 {
425 uint8_t entry_type; /* Entry type. */
426 uint8_t entry_count; /* Entry count. */
427 uint8_t sys_define; /* System defined. */
428 uint8_t entry_status; /* Entry Status. */
429
430 uint32_t handle; /* System handle. */
431
432 uint16_t nport_handle; /* N_PORT handle. */
433 uint16_t timeout; /* Command timeout. */
434 #define FW_MAX_TIMEOUT 0x1999
435
436 uint16_t dseg_count; /* Data segment count. */
437 uint16_t reserved_1;
438
439 struct scsi_lun lun; /* FCP LUN (BE). */
440
441 uint16_t task_mgmt_flags; /* Task management flags. */
442 #define TMF_CLEAR_ACA BIT_14
443 #define TMF_TARGET_RESET BIT_13
444 #define TMF_LUN_RESET BIT_12
445 #define TMF_CLEAR_TASK_SET BIT_10
446 #define TMF_ABORT_TASK_SET BIT_9
447 #define TMF_DSD_LIST_ENABLE BIT_2
448 #define TMF_READ_DATA BIT_1
449 #define TMF_WRITE_DATA BIT_0
450
451 uint8_t task;
452 #define TSK_SIMPLE 0
453 #define TSK_HEAD_OF_QUEUE 1
454 #define TSK_ORDERED 2
455 #define TSK_ACA 4
456 #define TSK_UNTAGGED 5
457
458 uint8_t crn;
459
460 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */
461 uint32_t byte_count; /* Total byte count. */
462
463 uint8_t port_id[3]; /* PortID of destination port. */
464 uint8_t vp_index;
465
466 uint32_t dseg_0_address[2]; /* Data segment 0 address. */
467 uint32_t dseg_0_len; /* Data segment 0 length. */
468 };
469
470 #define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6)
471 * (T10-DIF) */
472 struct cmd_type_crc_2 {
473 uint8_t entry_type; /* Entry type. */
474 uint8_t entry_count; /* Entry count. */
475 uint8_t sys_define; /* System defined. */
476 uint8_t entry_status; /* Entry Status. */
477
478 uint32_t handle; /* System handle. */
479
480 uint16_t nport_handle; /* N_PORT handle. */
481 uint16_t timeout; /* Command timeout. */
482
483 uint16_t dseg_count; /* Data segment count. */
484
485 uint16_t fcp_rsp_dseg_len; /* FCP_RSP DSD length. */
486
487 struct scsi_lun lun; /* FCP LUN (BE). */
488
489 uint16_t control_flags; /* Control flags. */
490
491 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */
492 uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */
493
494 uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */
495
496 uint32_t byte_count; /* Total byte count. */
497
498 uint8_t port_id[3]; /* PortID of destination port. */
499 uint8_t vp_index;
500
501 uint32_t crc_context_address[2]; /* Data segment address. */
502 uint16_t crc_context_len; /* Data segment length. */
503 uint16_t reserved_1; /* MUST be set to 0. */
504 };
505
506
507 /*
508 * ISP queue - status entry structure definition.
509 */
510 #define STATUS_TYPE 0x03 /* Status entry. */
511 struct sts_entry_24xx {
512 uint8_t entry_type; /* Entry type. */
513 uint8_t entry_count; /* Entry count. */
514 uint8_t sys_define; /* System defined. */
515 uint8_t entry_status; /* Entry Status. */
516
517 uint32_t handle; /* System handle. */
518
519 uint16_t comp_status; /* Completion status. */
520 uint16_t ox_id; /* OX_ID used by the firmware. */
521
522 uint32_t residual_len; /* FW calc residual transfer length. */
523
524 uint16_t reserved_1;
525 uint16_t state_flags; /* State flags. */
526 #define SF_TRANSFERRED_DATA BIT_11
527 #define SF_FCP_RSP_DMA BIT_0
528
529 uint16_t reserved_2;
530 uint16_t scsi_status; /* SCSI status. */
531 #define SS_CONFIRMATION_REQ BIT_12
532
533 uint32_t rsp_residual_count; /* FCP RSP residual count. */
534
535 uint32_t sense_len; /* FCP SENSE length. */
536 uint32_t rsp_data_len; /* FCP response data length. */
537 uint8_t data[28]; /* FCP response/sense information. */
538 /*
539 * If DIF Error is set in comp_status, these additional fields are
540 * defined:
541 * &data[10] : uint8_t report_runt_bg[2]; - computed guard
542 * &data[12] : uint8_t actual_dif[8]; - DIF Data recieved
543 * &data[20] : uint8_t expected_dif[8]; - DIF Data computed
544 */
545 };
546
547
548 /*
549 * Status entry completion status
550 */
551 #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */
552 #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */
553 #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */
554 #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */
555 #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */
556
557 /*
558 * ISP queue - marker entry structure definition.
559 */
560 #define MARKER_TYPE 0x04 /* Marker entry. */
561 struct mrk_entry_24xx {
562 uint8_t entry_type; /* Entry type. */
563 uint8_t entry_count; /* Entry count. */
564 uint8_t handle_count; /* Handle count. */
565 uint8_t entry_status; /* Entry Status. */
566
567 uint32_t handle; /* System handle. */
568
569 uint16_t nport_handle; /* N_PORT handle. */
570
571 uint8_t modifier; /* Modifier (7-0). */
572 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */
573 #define MK_SYNC_ID 1 /* Synchronize ID */
574 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */
575 uint8_t reserved_1;
576
577 uint8_t reserved_2;
578 uint8_t vp_index;
579
580 uint16_t reserved_3;
581
582 uint8_t lun[8]; /* FCP LUN (BE). */
583 uint8_t reserved_4[40];
584 };
585
586 /*
587 * ISP queue - CT Pass-Through entry structure definition.
588 */
589 #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */
590 struct ct_entry_24xx {
591 uint8_t entry_type; /* Entry type. */
592 uint8_t entry_count; /* Entry count. */
593 uint8_t sys_define; /* System Defined. */
594 uint8_t entry_status; /* Entry Status. */
595
596 uint32_t handle; /* System handle. */
597
598 uint16_t comp_status; /* Completion status. */
599
600 uint16_t nport_handle; /* N_PORT handle. */
601
602 uint16_t cmd_dsd_count;
603
604 uint8_t vp_index;
605 uint8_t reserved_1;
606
607 uint16_t timeout; /* Command timeout. */
608 uint16_t reserved_2;
609
610 uint16_t rsp_dsd_count;
611
612 uint8_t reserved_3[10];
613
614 uint32_t rsp_byte_count;
615 uint32_t cmd_byte_count;
616
617 uint32_t dseg_0_address[2]; /* Data segment 0 address. */
618 uint32_t dseg_0_len; /* Data segment 0 length. */
619 uint32_t dseg_1_address[2]; /* Data segment 1 address. */
620 uint32_t dseg_1_len; /* Data segment 1 length. */
621 };
622
623 /*
624 * ISP queue - ELS Pass-Through entry structure definition.
625 */
626 #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */
627 struct els_entry_24xx {
628 uint8_t entry_type; /* Entry type. */
629 uint8_t entry_count; /* Entry count. */
630 uint8_t sys_define; /* System Defined. */
631 uint8_t entry_status; /* Entry Status. */
632
633 uint32_t handle; /* System handle. */
634
635 uint16_t reserved_1;
636
637 uint16_t nport_handle; /* N_PORT handle. */
638
639 uint16_t tx_dsd_count;
640
641 uint8_t vp_index;
642 uint8_t sof_type;
643 #define EST_SOFI3 (1 << 4)
644 #define EST_SOFI2 (3 << 4)
645
646 uint32_t rx_xchg_address; /* Receive exchange address. */
647 uint16_t rx_dsd_count;
648
649 uint8_t opcode;
650 uint8_t reserved_2;
651
652 uint8_t port_id[3];
653 uint8_t reserved_3;
654
655 uint16_t reserved_4;
656
657 uint16_t control_flags; /* Control flags. */
658 #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13)
659 #define EPD_ELS_COMMAND (0 << 13)
660 #define EPD_ELS_ACC (1 << 13)
661 #define EPD_ELS_RJT (2 << 13)
662 #define EPD_RX_XCHG (3 << 13)
663 #define ECF_CLR_PASSTHRU_PEND BIT_12
664 #define ECF_INCL_FRAME_HDR BIT_11
665
666 uint32_t rx_byte_count;
667 uint32_t tx_byte_count;
668
669 uint32_t tx_address[2]; /* Data segment 0 address. */
670 uint32_t tx_len; /* Data segment 0 length. */
671 uint32_t rx_address[2]; /* Data segment 1 address. */
672 uint32_t rx_len; /* Data segment 1 length. */
673 };
674
675 struct els_sts_entry_24xx {
676 uint8_t entry_type; /* Entry type. */
677 uint8_t entry_count; /* Entry count. */
678 uint8_t sys_define; /* System Defined. */
679 uint8_t entry_status; /* Entry Status. */
680
681 uint32_t handle; /* System handle. */
682
683 uint16_t comp_status;
684
685 uint16_t nport_handle; /* N_PORT handle. */
686
687 uint16_t reserved_1;
688
689 uint8_t vp_index;
690 uint8_t sof_type;
691
692 uint32_t rx_xchg_address; /* Receive exchange address. */
693 uint16_t reserved_2;
694
695 uint8_t opcode;
696 uint8_t reserved_3;
697
698 uint8_t port_id[3];
699 uint8_t reserved_4;
700
701 uint16_t reserved_5;
702
703 uint16_t control_flags; /* Control flags. */
704 uint32_t total_byte_count;
705 uint32_t error_subcode_1;
706 uint32_t error_subcode_2;
707 };
708 /*
709 * ISP queue - Mailbox Command entry structure definition.
710 */
711 #define MBX_IOCB_TYPE 0x39
712 struct mbx_entry_24xx {
713 uint8_t entry_type; /* Entry type. */
714 uint8_t entry_count; /* Entry count. */
715 uint8_t handle_count; /* Handle count. */
716 uint8_t entry_status; /* Entry Status. */
717
718 uint32_t handle; /* System handle. */
719
720 uint16_t mbx[28];
721 };
722
723
724 #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */
725 struct logio_entry_24xx {
726 uint8_t entry_type; /* Entry type. */
727 uint8_t entry_count; /* Entry count. */
728 uint8_t sys_define; /* System defined. */
729 uint8_t entry_status; /* Entry Status. */
730
731 uint32_t handle; /* System handle. */
732
733 uint16_t comp_status; /* Completion status. */
734 #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */
735
736 uint16_t nport_handle; /* N_PORT handle. */
737
738 uint16_t control_flags; /* Control flags. */
739 /* Modifiers. */
740 #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */
741 #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */
742 #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */
743 #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */
744 #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */
745 #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */
746 #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */
747 #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */
748 #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */
749 #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */
750 /* Commands. */
751 #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */
752 #define LCF_COMMAND_PRLI 0x01 /* PRLI. */
753 #define LCF_COMMAND_PDISC 0x02 /* PDISC. */
754 #define LCF_COMMAND_ADISC 0x03 /* ADISC. */
755 #define LCF_COMMAND_LOGO 0x08 /* LOGO. */
756 #define LCF_COMMAND_PRLO 0x09 /* PRLO. */
757 #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */
758
759 uint8_t vp_index;
760 uint8_t reserved_1;
761
762 uint8_t port_id[3]; /* PortID of destination port. */
763
764 uint8_t rsp_size; /* Response size in 32bit words. */
765
766 uint32_t io_parameter[11]; /* General I/O parameters. */
767 #define LSC_SCODE_NOLINK 0x01
768 #define LSC_SCODE_NOIOCB 0x02
769 #define LSC_SCODE_NOXCB 0x03
770 #define LSC_SCODE_CMD_FAILED 0x04
771 #define LSC_SCODE_NOFABRIC 0x05
772 #define LSC_SCODE_FW_NOT_READY 0x07
773 #define LSC_SCODE_NOT_LOGGED_IN 0x09
774 #define LSC_SCODE_NOPCB 0x0A
775
776 #define LSC_SCODE_ELS_REJECT 0x18
777 #define LSC_SCODE_CMD_PARAM_ERR 0x19
778 #define LSC_SCODE_PORTID_USED 0x1A
779 #define LSC_SCODE_NPORT_USED 0x1B
780 #define LSC_SCODE_NONPORT 0x1C
781 #define LSC_SCODE_LOGGED_IN 0x1D
782 #define LSC_SCODE_NOFLOGI_ACC 0x1F
783 };
784
785 #define TSK_MGMT_IOCB_TYPE 0x14
786 struct tsk_mgmt_entry {
787 uint8_t entry_type; /* Entry type. */
788 uint8_t entry_count; /* Entry count. */
789 uint8_t handle_count; /* Handle count. */
790 uint8_t entry_status; /* Entry Status. */
791
792 uint32_t handle; /* System handle. */
793
794 uint16_t nport_handle; /* N_PORT handle. */
795
796 uint16_t reserved_1;
797
798 uint16_t delay; /* Activity delay in seconds. */
799
800 uint16_t timeout; /* Command timeout. */
801
802 struct scsi_lun lun; /* FCP LUN (BE). */
803
804 uint32_t control_flags; /* Control Flags. */
805 #define TCF_NOTMCMD_TO_TARGET BIT_31
806 #define TCF_LUN_RESET BIT_4
807 #define TCF_ABORT_TASK_SET BIT_3
808 #define TCF_CLEAR_TASK_SET BIT_2
809 #define TCF_TARGET_RESET BIT_1
810 #define TCF_CLEAR_ACA BIT_0
811
812 uint8_t reserved_2[20];
813
814 uint8_t port_id[3]; /* PortID of destination port. */
815 uint8_t vp_index;
816
817 uint8_t reserved_3[12];
818 };
819
820 #define ABORT_IOCB_TYPE 0x33
821 struct abort_entry_24xx {
822 uint8_t entry_type; /* Entry type. */
823 uint8_t entry_count; /* Entry count. */
824 uint8_t handle_count; /* Handle count. */
825 uint8_t entry_status; /* Entry Status. */
826
827 uint32_t handle; /* System handle. */
828
829 uint16_t nport_handle; /* N_PORT handle. */
830 /* or Completion status. */
831
832 uint16_t options; /* Options. */
833 #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */
834
835 uint32_t handle_to_abort; /* System handle to abort. */
836
837 uint16_t req_que_no;
838 uint8_t reserved_1[30];
839
840 uint8_t port_id[3]; /* PortID of destination port. */
841 uint8_t vp_index;
842
843 uint8_t reserved_2[12];
844 };
845
846 /*
847 * ISP I/O Register Set structure definitions.
848 */
849 struct device_reg_24xx {
850 uint32_t flash_addr; /* Flash/NVRAM BIOS address. */
851 #define FARX_DATA_FLAG BIT_31
852 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000
853 #define FARX_ACCESS_FLASH_DATA 0x7FF00000
854 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000
855 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000
856
857 #define FA_NVRAM_FUNC0_ADDR 0x80
858 #define FA_NVRAM_FUNC1_ADDR 0x180
859
860 #define FA_NVRAM_VPD_SIZE 0x200
861 #define FA_NVRAM_VPD0_ADDR 0x00
862 #define FA_NVRAM_VPD1_ADDR 0x100
863
864 #define FA_BOOT_CODE_ADDR 0x00000
865 /*
866 * RISC code begins at offset 512KB
867 * within flash. Consisting of two
868 * contiguous RISC code segments.
869 */
870 #define FA_RISC_CODE_ADDR 0x20000
871 #define FA_RISC_CODE_SEGMENTS 2
872
873 #define FA_FLASH_DESCR_ADDR_24 0x11000
874 #define FA_FLASH_LAYOUT_ADDR_24 0x11400
875 #define FA_NPIV_CONF0_ADDR_24 0x16000
876 #define FA_NPIV_CONF1_ADDR_24 0x17000
877
878 #define FA_FW_AREA_ADDR 0x40000
879 #define FA_VPD_NVRAM_ADDR 0x48000
880 #define FA_FEATURE_ADDR 0x4C000
881 #define FA_FLASH_DESCR_ADDR 0x50000
882 #define FA_FLASH_LAYOUT_ADDR 0x50400
883 #define FA_HW_EVENT0_ADDR 0x54000
884 #define FA_HW_EVENT1_ADDR 0x54400
885 #define FA_HW_EVENT_SIZE 0x200
886 #define FA_HW_EVENT_ENTRY_SIZE 4
887 #define FA_NPIV_CONF0_ADDR 0x5C000
888 #define FA_NPIV_CONF1_ADDR 0x5D000
889 #define FA_FCP_PRIO0_ADDR 0x10000
890 #define FA_FCP_PRIO1_ADDR 0x12000
891
892 /*
893 * Flash Error Log Event Codes.
894 */
895 #define HW_EVENT_RESET_ERR 0xF00B
896 #define HW_EVENT_ISP_ERR 0xF020
897 #define HW_EVENT_PARITY_ERR 0xF022
898 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023
899 #define HW_EVENT_FLASH_FW_ERR 0xF024
900
901 uint32_t flash_data; /* Flash/NVRAM BIOS data. */
902
903 uint32_t ctrl_status; /* Control/Status. */
904 #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */
905 #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */
906 #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */
907 #define CSRX_FUNCTION BIT_15 /* Function number. */
908 /* PCI-X Bus Mode. */
909 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8)
910 #define PBM_PCI_33MHZ (0 << 8)
911 #define PBM_PCIX_M1_66MHZ (1 << 8)
912 #define PBM_PCIX_M1_100MHZ (2 << 8)
913 #define PBM_PCIX_M1_133MHZ (3 << 8)
914 #define PBM_PCIX_M2_66MHZ (5 << 8)
915 #define PBM_PCIX_M2_100MHZ (6 << 8)
916 #define PBM_PCIX_M2_133MHZ (7 << 8)
917 #define PBM_PCI_66MHZ (8 << 8)
918 /* Max Write Burst byte count. */
919 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4)
920 #define MWB_512_BYTES (0 << 4)
921 #define MWB_1024_BYTES (1 << 4)
922 #define MWB_2048_BYTES (2 << 4)
923 #define MWB_4096_BYTES (3 << 4)
924
925 #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */
926 #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */
927 #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */
928
929 uint32_t ictrl; /* Interrupt control. */
930 #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */
931
932 uint32_t istatus; /* Interrupt status. */
933 #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */
934
935 uint32_t unused_1[2]; /* Gap. */
936
937 /* Request Queue. */
938 uint32_t req_q_in; /* In-Pointer. */
939 uint32_t req_q_out; /* Out-Pointer. */
940 /* Response Queue. */
941 uint32_t rsp_q_in; /* In-Pointer. */
942 uint32_t rsp_q_out; /* Out-Pointer. */
943 /* Priority Request Queue. */
944 uint32_t preq_q_in; /* In-Pointer. */
945 uint32_t preq_q_out; /* Out-Pointer. */
946
947 uint32_t unused_2[2]; /* Gap. */
948
949 /* ATIO Queue. */
950 uint32_t atio_q_in; /* In-Pointer. */
951 uint32_t atio_q_out; /* Out-Pointer. */
952
953 uint32_t host_status;
954 #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */
955 #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */
956
957 uint32_t hccr; /* Host command & control register. */
958 /* HCCR statuses. */
959 #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */
960 #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */
961 /* HCCR commands. */
962 /* NOOP. */
963 #define HCCRX_NOOP 0x00000000
964 /* Set RISC Reset. */
965 #define HCCRX_SET_RISC_RESET 0x10000000
966 /* Clear RISC Reset. */
967 #define HCCRX_CLR_RISC_RESET 0x20000000
968 /* Set RISC Pause. */
969 #define HCCRX_SET_RISC_PAUSE 0x30000000
970 /* Releases RISC Pause. */
971 #define HCCRX_REL_RISC_PAUSE 0x40000000
972 /* Set HOST to RISC interrupt. */
973 #define HCCRX_SET_HOST_INT 0x50000000
974 /* Clear HOST to RISC interrupt. */
975 #define HCCRX_CLR_HOST_INT 0x60000000
976 /* Clear RISC to PCI interrupt. */
977 #define HCCRX_CLR_RISC_INT 0xA0000000
978
979 uint32_t gpiod; /* GPIO Data register. */
980
981 /* LED update mask. */
982 #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18)
983 /* Data update mask. */
984 #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16)
985 /* Data update mask. */
986 #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
987 /* LED control mask. */
988 #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2)
989 /* LED bit values. Color names as
990 * referenced in fw spec.
991 */
992 #define GPDX_LED_YELLOW_ON BIT_2
993 #define GPDX_LED_GREEN_ON BIT_3
994 #define GPDX_LED_AMBER_ON BIT_4
995 /* Data in/out. */
996 #define GPDX_DATA_INOUT (BIT_1|BIT_0)
997
998 uint32_t gpioe; /* GPIO Enable register. */
999 /* Enable update mask. */
1000 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16)
1001 /* Enable update mask. */
1002 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1003 /* Enable. */
1004 #define GPEX_ENABLE (BIT_1|BIT_0)
1005
1006 uint32_t iobase_addr; /* I/O Bus Base Address register. */
1007
1008 uint32_t unused_3[10]; /* Gap. */
1009
1010 uint16_t mailbox0;
1011 uint16_t mailbox1;
1012 uint16_t mailbox2;
1013 uint16_t mailbox3;
1014 uint16_t mailbox4;
1015 uint16_t mailbox5;
1016 uint16_t mailbox6;
1017 uint16_t mailbox7;
1018 uint16_t mailbox8;
1019 uint16_t mailbox9;
1020 uint16_t mailbox10;
1021 uint16_t mailbox11;
1022 uint16_t mailbox12;
1023 uint16_t mailbox13;
1024 uint16_t mailbox14;
1025 uint16_t mailbox15;
1026 uint16_t mailbox16;
1027 uint16_t mailbox17;
1028 uint16_t mailbox18;
1029 uint16_t mailbox19;
1030 uint16_t mailbox20;
1031 uint16_t mailbox21;
1032 uint16_t mailbox22;
1033 uint16_t mailbox23;
1034 uint16_t mailbox24;
1035 uint16_t mailbox25;
1036 uint16_t mailbox26;
1037 uint16_t mailbox27;
1038 uint16_t mailbox28;
1039 uint16_t mailbox29;
1040 uint16_t mailbox30;
1041 uint16_t mailbox31;
1042
1043 uint32_t iobase_window;
1044 uint32_t iobase_c4;
1045 uint32_t iobase_c8;
1046 uint32_t unused_4_1[6]; /* Gap. */
1047 uint32_t iobase_q;
1048 uint32_t unused_5[2]; /* Gap. */
1049 uint32_t iobase_select;
1050 uint32_t unused_6[2]; /* Gap. */
1051 uint32_t iobase_sdata;
1052 };
1053
1054 /* Trace Control *************************************************************/
1055
1056 #define TC_AEN_DISABLE 0
1057
1058 #define TC_EFT_ENABLE 4
1059 #define TC_EFT_DISABLE 5
1060
1061 #define TC_FCE_ENABLE 8
1062 #define TC_FCE_OPTIONS 0
1063 #define TC_FCE_DEFAULT_RX_SIZE 2112
1064 #define TC_FCE_DEFAULT_TX_SIZE 2112
1065 #define TC_FCE_DISABLE 9
1066 #define TC_FCE_DISABLE_TRACE BIT_0
1067
1068 /* MID Support ***************************************************************/
1069
1070 #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */
1071 #define MAX_MULTI_ID_FABRIC 256 /* ... */
1072
1073 #define for_each_mapped_vp_idx(_ha, _idx) \
1074 for (_idx = find_next_bit((_ha)->vp_idx_map, \
1075 (_ha)->max_npiv_vports + 1, 1); \
1076 _idx <= (_ha)->max_npiv_vports; \
1077 _idx = find_next_bit((_ha)->vp_idx_map, \
1078 (_ha)->max_npiv_vports + 1, _idx + 1)) \
1079
1080 struct mid_conf_entry_24xx {
1081 uint16_t reserved_1;
1082
1083 /*
1084 * BIT 0 = Enable Hard Loop Id
1085 * BIT 1 = Acquire Loop ID in LIPA
1086 * BIT 2 = ID not Acquired
1087 * BIT 3 = Enable VP
1088 * BIT 4 = Enable Initiator Mode
1089 * BIT 5 = Disable Target Mode
1090 * BIT 6-7 = Reserved
1091 */
1092 uint8_t options;
1093
1094 uint8_t hard_address;
1095
1096 uint8_t port_name[WWN_SIZE];
1097 uint8_t node_name[WWN_SIZE];
1098 };
1099
1100 struct mid_init_cb_24xx {
1101 struct init_cb_24xx init_cb;
1102
1103 uint16_t count;
1104 uint16_t options;
1105
1106 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1107 };
1108
1109
1110 struct mid_db_entry_24xx {
1111 uint16_t status;
1112 #define MDBS_NON_PARTIC BIT_3
1113 #define MDBS_ID_ACQUIRED BIT_1
1114 #define MDBS_ENABLED BIT_0
1115
1116 uint8_t options;
1117 uint8_t hard_address;
1118
1119 uint8_t port_name[WWN_SIZE];
1120 uint8_t node_name[WWN_SIZE];
1121
1122 uint8_t port_id[3];
1123 uint8_t reserved_1;
1124 };
1125
1126 /*
1127 * Virtual Port Control IOCB
1128 */
1129 #define VP_CTRL_IOCB_TYPE 0x30 /* Vitual Port Control entry. */
1130 struct vp_ctrl_entry_24xx {
1131 uint8_t entry_type; /* Entry type. */
1132 uint8_t entry_count; /* Entry count. */
1133 uint8_t sys_define; /* System defined. */
1134 uint8_t entry_status; /* Entry Status. */
1135
1136 uint32_t handle; /* System handle. */
1137
1138 uint16_t vp_idx_failed;
1139
1140 uint16_t comp_status; /* Completion status. */
1141 #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */
1142 #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */
1143 #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */
1144
1145 uint16_t command;
1146 #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */
1147 #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */
1148 #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */
1149 #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */
1150 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */
1151
1152 uint16_t vp_count;
1153
1154 uint8_t vp_idx_map[16];
1155 uint16_t flags;
1156 uint16_t id;
1157 uint16_t reserved_4;
1158 uint16_t hopct;
1159 uint8_t reserved_5[24];
1160 };
1161
1162 /*
1163 * Modify Virtual Port Configuration IOCB
1164 */
1165 #define VP_CONFIG_IOCB_TYPE 0x31 /* Vitual Port Config entry. */
1166 struct vp_config_entry_24xx {
1167 uint8_t entry_type; /* Entry type. */
1168 uint8_t entry_count; /* Entry count. */
1169 uint8_t handle_count;
1170 uint8_t entry_status; /* Entry Status. */
1171
1172 uint32_t handle; /* System handle. */
1173
1174 uint16_t flags;
1175 #define CS_VF_BIND_VPORTS_TO_VF BIT_0
1176 #define CS_VF_SET_QOS_OF_VPORTS BIT_1
1177 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2
1178
1179 uint16_t comp_status; /* Completion status. */
1180 #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */
1181 #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */
1182 #define CS_VCT_ERROR 0x03 /* Unknown error. */
1183 #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */
1184 #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */
1185
1186 uint8_t command;
1187 #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */
1188 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */
1189
1190 uint8_t vp_count;
1191
1192 uint8_t vp_index1;
1193 uint8_t vp_index2;
1194
1195 uint8_t options_idx1;
1196 uint8_t hard_address_idx1;
1197 uint16_t reserved_vp1;
1198 uint8_t port_name_idx1[WWN_SIZE];
1199 uint8_t node_name_idx1[WWN_SIZE];
1200
1201 uint8_t options_idx2;
1202 uint8_t hard_address_idx2;
1203 uint16_t reserved_vp2;
1204 uint8_t port_name_idx2[WWN_SIZE];
1205 uint8_t node_name_idx2[WWN_SIZE];
1206 uint16_t id;
1207 uint16_t reserved_4;
1208 uint16_t hopct;
1209 uint8_t reserved_5[2];
1210 };
1211
1212 #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */
1213 struct vp_rpt_id_entry_24xx {
1214 uint8_t entry_type; /* Entry type. */
1215 uint8_t entry_count; /* Entry count. */
1216 uint8_t sys_define; /* System defined. */
1217 uint8_t entry_status; /* Entry Status. */
1218
1219 uint32_t handle; /* System handle. */
1220
1221 uint16_t vp_count; /* Format 0 -- | VP setup | VP acq |. */
1222 /* Format 1 -- | VP count |. */
1223 uint16_t vp_idx; /* Format 0 -- Reserved. */
1224 /* Format 1 -- VP status and index. */
1225
1226 uint8_t port_id[3];
1227 uint8_t format;
1228
1229 uint8_t vp_idx_map[16];
1230
1231 uint8_t reserved_4[32];
1232 };
1233
1234 #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */
1235 struct vf_evfp_entry_24xx {
1236 uint8_t entry_type; /* Entry type. */
1237 uint8_t entry_count; /* Entry count. */
1238 uint8_t sys_define; /* System defined. */
1239 uint8_t entry_status; /* Entry Status. */
1240
1241 uint32_t handle; /* System handle. */
1242 uint16_t comp_status; /* Completion status. */
1243 uint16_t timeout; /* timeout */
1244 uint16_t adim_tagging_mode;
1245
1246 uint16_t vfport_id;
1247 uint32_t exch_addr;
1248
1249 uint16_t nport_handle; /* N_PORT handle. */
1250 uint16_t control_flags;
1251 uint32_t io_parameter_0;
1252 uint32_t io_parameter_1;
1253 uint32_t tx_address[2]; /* Data segment 0 address. */
1254 uint32_t tx_len; /* Data segment 0 length. */
1255 uint32_t rx_address[2]; /* Data segment 1 address. */
1256 uint32_t rx_len; /* Data segment 1 length. */
1257 };
1258
1259 /* END MID Support ***********************************************************/
1260
1261 /* Flash Description Table ***************************************************/
1262
1263 struct qla_fdt_layout {
1264 uint8_t sig[4];
1265 uint16_t version;
1266 uint16_t len;
1267 uint16_t checksum;
1268 uint8_t unused1[2];
1269 uint8_t model[16];
1270 uint16_t man_id;
1271 uint16_t id;
1272 uint8_t flags;
1273 uint8_t erase_cmd;
1274 uint8_t alt_erase_cmd;
1275 uint8_t wrt_enable_cmd;
1276 uint8_t wrt_enable_bits;
1277 uint8_t wrt_sts_reg_cmd;
1278 uint8_t unprotect_sec_cmd;
1279 uint8_t read_man_id_cmd;
1280 uint32_t block_size;
1281 uint32_t alt_block_size;
1282 uint32_t flash_size;
1283 uint32_t wrt_enable_data;
1284 uint8_t read_id_addr_len;
1285 uint8_t wrt_disable_bits;
1286 uint8_t read_dev_id_len;
1287 uint8_t chip_erase_cmd;
1288 uint16_t read_timeout;
1289 uint8_t protect_sec_cmd;
1290 uint8_t unused2[65];
1291 };
1292
1293 /* Flash Layout Table ********************************************************/
1294
1295 struct qla_flt_location {
1296 uint8_t sig[4];
1297 uint16_t start_lo;
1298 uint16_t start_hi;
1299 uint8_t version;
1300 uint8_t unused[5];
1301 uint16_t checksum;
1302 };
1303
1304 struct qla_flt_header {
1305 uint16_t version;
1306 uint16_t length;
1307 uint16_t checksum;
1308 uint16_t unused;
1309 };
1310
1311 #define FLT_REG_FW 0x01
1312 #define FLT_REG_BOOT_CODE 0x07
1313 #define FLT_REG_VPD_0 0x14
1314 #define FLT_REG_NVRAM_0 0x15
1315 #define FLT_REG_VPD_1 0x16
1316 #define FLT_REG_NVRAM_1 0x17
1317 #define FLT_REG_FDT 0x1a
1318 #define FLT_REG_FLT 0x1c
1319 #define FLT_REG_HW_EVENT_0 0x1d
1320 #define FLT_REG_HW_EVENT_1 0x1f
1321 #define FLT_REG_NPIV_CONF_0 0x29
1322 #define FLT_REG_NPIV_CONF_1 0x2a
1323 #define FLT_REG_GOLD_FW 0x2f
1324 #define FLT_REG_FCP_PRIO_0 0x87
1325 #define FLT_REG_FCP_PRIO_1 0x88
1326
1327 struct qla_flt_region {
1328 uint32_t code;
1329 uint32_t size;
1330 uint32_t start;
1331 uint32_t end;
1332 };
1333
1334 /* Flash NPIV Configuration Table ********************************************/
1335
1336 struct qla_npiv_header {
1337 uint8_t sig[2];
1338 uint16_t version;
1339 uint16_t entries;
1340 uint16_t unused[4];
1341 uint16_t checksum;
1342 };
1343
1344 struct qla_npiv_entry {
1345 uint16_t flags;
1346 uint16_t vf_id;
1347 uint8_t q_qos;
1348 uint8_t f_qos;
1349 uint16_t unused1;
1350 uint8_t port_name[WWN_SIZE];
1351 uint8_t node_name[WWN_SIZE];
1352 };
1353
1354 /* 84XX Support **************************************************************/
1355
1356 #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */
1357 #define A84_PANIC_RECOVERY 0x1
1358 #define A84_OP_LOGIN_COMPLETE 0x2
1359 #define A84_DIAG_LOGIN_COMPLETE 0x3
1360 #define A84_GOLD_LOGIN_COMPLETE 0x4
1361
1362 #define MBC_ISP84XX_RESET 0x3a /* Reset. */
1363
1364 #define FSTATE_REMOTE_FC_DOWN BIT_0
1365 #define FSTATE_NSL_LINK_DOWN BIT_1
1366 #define FSTATE_IS_DIAG_FW BIT_2
1367 #define FSTATE_LOGGED_IN BIT_3
1368 #define FSTATE_WAITING_FOR_VERIFY BIT_4
1369
1370 #define VERIFY_CHIP_IOCB_TYPE 0x1B
1371 struct verify_chip_entry_84xx {
1372 uint8_t entry_type;
1373 uint8_t entry_count;
1374 uint8_t sys_defined;
1375 uint8_t entry_status;
1376
1377 uint32_t handle;
1378
1379 uint16_t options;
1380 #define VCO_DONT_UPDATE_FW BIT_0
1381 #define VCO_FORCE_UPDATE BIT_1
1382 #define VCO_DONT_RESET_UPDATE BIT_2
1383 #define VCO_DIAG_FW BIT_3
1384 #define VCO_END_OF_DATA BIT_14
1385 #define VCO_ENABLE_DSD BIT_15
1386
1387 uint16_t reserved_1;
1388
1389 uint16_t data_seg_cnt;
1390 uint16_t reserved_2[3];
1391
1392 uint32_t fw_ver;
1393 uint32_t exchange_address;
1394
1395 uint32_t reserved_3[3];
1396 uint32_t fw_size;
1397 uint32_t fw_seq_size;
1398 uint32_t relative_offset;
1399
1400 uint32_t dseg_address[2];
1401 uint32_t dseg_length;
1402 };
1403
1404 struct verify_chip_rsp_84xx {
1405 uint8_t entry_type;
1406 uint8_t entry_count;
1407 uint8_t sys_defined;
1408 uint8_t entry_status;
1409
1410 uint32_t handle;
1411
1412 uint16_t comp_status;
1413 #define CS_VCS_CHIP_FAILURE 0x3
1414 #define CS_VCS_BAD_EXCHANGE 0x8
1415 #define CS_VCS_SEQ_COMPLETEi 0x40
1416
1417 uint16_t failure_code;
1418 #define VFC_CHECKSUM_ERROR 0x1
1419 #define VFC_INVALID_LEN 0x2
1420 #define VFC_ALREADY_IN_PROGRESS 0x8
1421
1422 uint16_t reserved_1[4];
1423
1424 uint32_t fw_ver;
1425 uint32_t exchange_address;
1426
1427 uint32_t reserved_2[6];
1428 };
1429
1430 #define ACCESS_CHIP_IOCB_TYPE 0x2B
1431 struct access_chip_84xx {
1432 uint8_t entry_type;
1433 uint8_t entry_count;
1434 uint8_t sys_defined;
1435 uint8_t entry_status;
1436
1437 uint32_t handle;
1438
1439 uint16_t options;
1440 #define ACO_DUMP_MEMORY 0x0
1441 #define ACO_LOAD_MEMORY 0x1
1442 #define ACO_CHANGE_CONFIG_PARAM 0x2
1443 #define ACO_REQUEST_INFO 0x3
1444
1445 uint16_t reserved1;
1446
1447 uint16_t dseg_count;
1448 uint16_t reserved2[3];
1449
1450 uint32_t parameter1;
1451 uint32_t parameter2;
1452 uint32_t parameter3;
1453
1454 uint32_t reserved3[3];
1455 uint32_t total_byte_cnt;
1456 uint32_t reserved4;
1457
1458 uint32_t dseg_address[2];
1459 uint32_t dseg_length;
1460 };
1461
1462 struct access_chip_rsp_84xx {
1463 uint8_t entry_type;
1464 uint8_t entry_count;
1465 uint8_t sys_defined;
1466 uint8_t entry_status;
1467
1468 uint32_t handle;
1469
1470 uint16_t comp_status;
1471 uint16_t failure_code;
1472 uint32_t residual_count;
1473
1474 uint32_t reserved[12];
1475 };
1476
1477 /* 81XX Support **************************************************************/
1478
1479 #define MBA_DCBX_START 0x8016
1480 #define MBA_DCBX_COMPLETE 0x8030
1481 #define MBA_FCF_CONF_ERR 0x8031
1482 #define MBA_DCBX_PARAM_UPDATE 0x8032
1483 #define MBA_IDC_COMPLETE 0x8100
1484 #define MBA_IDC_NOTIFY 0x8101
1485 #define MBA_IDC_TIME_EXT 0x8102
1486
1487 #define MBC_IDC_ACK 0x101
1488 #define MBC_RESTART_MPI_FW 0x3d
1489 #define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */
1490 #define MBC_GET_XGMAC_STATS 0x7a
1491 #define MBC_GET_DCBX_PARAMS 0x51
1492
1493 /* Flash access control option field bit definitions */
1494 #define FAC_OPT_FORCE_SEMAPHORE BIT_15
1495 #define FAC_OPT_REQUESTOR_ID BIT_14
1496 #define FAC_OPT_CMD_SUBCODE 0xff
1497
1498 /* Flash access control command subcodes */
1499 #define FAC_OPT_CMD_WRITE_PROTECT 0x00
1500 #define FAC_OPT_CMD_WRITE_ENABLE 0x01
1501 #define FAC_OPT_CMD_ERASE_SECTOR 0x02
1502 #define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03
1503 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04
1504 #define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05
1505
1506 struct nvram_81xx {
1507 /* NVRAM header. */
1508 uint8_t id[4];
1509 uint16_t nvram_version;
1510 uint16_t reserved_0;
1511
1512 /* Firmware Initialization Control Block. */
1513 uint16_t version;
1514 uint16_t reserved_1;
1515 uint16_t frame_payload_size;
1516 uint16_t execution_throttle;
1517 uint16_t exchange_count;
1518 uint16_t reserved_2;
1519
1520 uint8_t port_name[WWN_SIZE];
1521 uint8_t node_name[WWN_SIZE];
1522
1523 uint16_t login_retry_count;
1524 uint16_t reserved_3;
1525 uint16_t interrupt_delay_timer;
1526 uint16_t login_timeout;
1527
1528 uint32_t firmware_options_1;
1529 uint32_t firmware_options_2;
1530 uint32_t firmware_options_3;
1531
1532 uint16_t reserved_4[4];
1533
1534 /* Offset 64. */
1535 uint8_t enode_mac[6];
1536 uint16_t reserved_5[5];
1537
1538 /* Offset 80. */
1539 uint16_t reserved_6[24];
1540
1541 /* Offset 128. */
1542 uint16_t ex_version;
1543 uint8_t prio_fcf_matching_flags;
1544 uint8_t reserved_6_1[3];
1545 uint16_t pri_fcf_vlan_id;
1546 uint8_t pri_fcf_fabric_name[8];
1547 uint16_t reserved_6_2[7];
1548 uint8_t spma_mac_addr[6];
1549 uint16_t reserved_6_3[14];
1550
1551 /* Offset 192. */
1552 uint16_t reserved_7[32];
1553
1554 /*
1555 * BIT 0 = Enable spinup delay
1556 * BIT 1 = Disable BIOS
1557 * BIT 2 = Enable Memory Map BIOS
1558 * BIT 3 = Enable Selectable Boot
1559 * BIT 4 = Disable RISC code load
1560 * BIT 5 = Disable Serdes
1561 * BIT 6 = Opt boot mode
1562 * BIT 7 = Interrupt enable
1563 *
1564 * BIT 8 = EV Control enable
1565 * BIT 9 = Enable lip reset
1566 * BIT 10 = Enable lip full login
1567 * BIT 11 = Enable target reset
1568 * BIT 12 = Stop firmware
1569 * BIT 13 = Enable nodename option
1570 * BIT 14 = Default WWPN valid
1571 * BIT 15 = Enable alternate WWN
1572 *
1573 * BIT 16 = CLP LUN string
1574 * BIT 17 = CLP Target string
1575 * BIT 18 = CLP BIOS enable string
1576 * BIT 19 = CLP Serdes string
1577 * BIT 20 = CLP WWPN string
1578 * BIT 21 = CLP WWNN string
1579 * BIT 22 =
1580 * BIT 23 =
1581 * BIT 24 = Keep WWPN
1582 * BIT 25 = Temp WWPN
1583 * BIT 26-31 =
1584 */
1585 uint32_t host_p;
1586
1587 uint8_t alternate_port_name[WWN_SIZE];
1588 uint8_t alternate_node_name[WWN_SIZE];
1589
1590 uint8_t boot_port_name[WWN_SIZE];
1591 uint16_t boot_lun_number;
1592 uint16_t reserved_8;
1593
1594 uint8_t alt1_boot_port_name[WWN_SIZE];
1595 uint16_t alt1_boot_lun_number;
1596 uint16_t reserved_9;
1597
1598 uint8_t alt2_boot_port_name[WWN_SIZE];
1599 uint16_t alt2_boot_lun_number;
1600 uint16_t reserved_10;
1601
1602 uint8_t alt3_boot_port_name[WWN_SIZE];
1603 uint16_t alt3_boot_lun_number;
1604 uint16_t reserved_11;
1605
1606 /*
1607 * BIT 0 = Selective Login
1608 * BIT 1 = Alt-Boot Enable
1609 * BIT 2 = Reserved
1610 * BIT 3 = Boot Order List
1611 * BIT 4 = Reserved
1612 * BIT 5 = Selective LUN
1613 * BIT 6 = Reserved
1614 * BIT 7-31 =
1615 */
1616 uint32_t efi_parameters;
1617
1618 uint8_t reset_delay;
1619 uint8_t reserved_12;
1620 uint16_t reserved_13;
1621
1622 uint16_t boot_id_number;
1623 uint16_t reserved_14;
1624
1625 uint16_t max_luns_per_target;
1626 uint16_t reserved_15;
1627
1628 uint16_t port_down_retry_count;
1629 uint16_t link_down_timeout;
1630
1631 /* FCode parameters. */
1632 uint16_t fcode_parameter;
1633
1634 uint16_t reserved_16[3];
1635
1636 /* Offset 352. */
1637 uint8_t reserved_17[4];
1638 uint16_t reserved_18[5];
1639 uint8_t reserved_19[2];
1640 uint16_t reserved_20[8];
1641
1642 /* Offset 384. */
1643 uint8_t reserved_21[16];
1644 uint16_t reserved_22[3];
1645
1646 /*
1647 * BIT 0 = Extended BB credits for LR
1648 * BIT 1 = Virtual Fabric Enable
1649 * BIT 2 = Enhanced Features Unused
1650 * BIT 3-7 = Enhanced Features Reserved
1651 */
1652 /* Enhanced Features */
1653 uint8_t enhanced_features;
1654
1655 uint8_t reserved_23;
1656 uint16_t reserved_24[4];
1657
1658 /* Offset 416. */
1659 uint16_t reserved_25[32];
1660
1661 /* Offset 480. */
1662 uint8_t model_name[16];
1663
1664 /* Offset 496. */
1665 uint16_t feature_mask_l;
1666 uint16_t feature_mask_h;
1667 uint16_t reserved_26[2];
1668
1669 uint16_t subsystem_vendor_id;
1670 uint16_t subsystem_device_id;
1671
1672 uint32_t checksum;
1673 };
1674
1675 /*
1676 * ISP Initialization Control Block.
1677 * Little endian except where noted.
1678 */
1679 #define ICB_VERSION 1
1680 struct init_cb_81xx {
1681 uint16_t version;
1682 uint16_t reserved_1;
1683
1684 uint16_t frame_payload_size;
1685 uint16_t execution_throttle;
1686 uint16_t exchange_count;
1687
1688 uint16_t reserved_2;
1689
1690 uint8_t port_name[WWN_SIZE]; /* Big endian. */
1691 uint8_t node_name[WWN_SIZE]; /* Big endian. */
1692
1693 uint16_t response_q_inpointer;
1694 uint16_t request_q_outpointer;
1695
1696 uint16_t login_retry_count;
1697
1698 uint16_t prio_request_q_outpointer;
1699
1700 uint16_t response_q_length;
1701 uint16_t request_q_length;
1702
1703 uint16_t reserved_3;
1704
1705 uint16_t prio_request_q_length;
1706
1707 uint32_t request_q_address[2];
1708 uint32_t response_q_address[2];
1709 uint32_t prio_request_q_address[2];
1710
1711 uint8_t reserved_4[8];
1712
1713 uint16_t atio_q_inpointer;
1714 uint16_t atio_q_length;
1715 uint32_t atio_q_address[2];
1716
1717 uint16_t interrupt_delay_timer; /* 100us increments. */
1718 uint16_t login_timeout;
1719
1720 /*
1721 * BIT 0-3 = Reserved
1722 * BIT 4 = Enable Target Mode
1723 * BIT 5 = Disable Initiator Mode
1724 * BIT 6 = Reserved
1725 * BIT 7 = Reserved
1726 *
1727 * BIT 8-13 = Reserved
1728 * BIT 14 = Node Name Option
1729 * BIT 15-31 = Reserved
1730 */
1731 uint32_t firmware_options_1;
1732
1733 /*
1734 * BIT 0 = Operation Mode bit 0
1735 * BIT 1 = Operation Mode bit 1
1736 * BIT 2 = Operation Mode bit 2
1737 * BIT 3 = Operation Mode bit 3
1738 * BIT 4-7 = Reserved
1739 *
1740 * BIT 8 = Enable Class 2
1741 * BIT 9 = Enable ACK0
1742 * BIT 10 = Reserved
1743 * BIT 11 = Enable FC-SP Security
1744 * BIT 12 = FC Tape Enable
1745 * BIT 13 = Reserved
1746 * BIT 14 = Enable Target PRLI Control
1747 * BIT 15-31 = Reserved
1748 */
1749 uint32_t firmware_options_2;
1750
1751 /*
1752 * BIT 0-3 = Reserved
1753 * BIT 4 = FCP RSP Payload bit 0
1754 * BIT 5 = FCP RSP Payload bit 1
1755 * BIT 6 = Enable Receive Out-of-Order data frame handling
1756 * BIT 7 = Reserved
1757 *
1758 * BIT 8 = Reserved
1759 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling
1760 * BIT 10-16 = Reserved
1761 * BIT 17 = Enable multiple FCFs
1762 * BIT 18-20 = MAC addressing mode
1763 * BIT 21-25 = Ethernet data rate
1764 * BIT 26 = Enable ethernet header rx IOCB for ATIO q
1765 * BIT 27 = Enable ethernet header rx IOCB for response q
1766 * BIT 28 = SPMA selection bit 0
1767 * BIT 28 = SPMA selection bit 1
1768 * BIT 30-31 = Reserved
1769 */
1770 uint32_t firmware_options_3;
1771
1772 uint8_t reserved_5[8];
1773
1774 uint8_t enode_mac[6];
1775
1776 uint8_t reserved_6[10];
1777 };
1778
1779 struct mid_init_cb_81xx {
1780 struct init_cb_81xx init_cb;
1781
1782 uint16_t count;
1783 uint16_t options;
1784
1785 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1786 };
1787
1788 struct ex_init_cb_81xx {
1789 uint16_t ex_version;
1790 uint8_t prio_fcf_matching_flags;
1791 uint8_t reserved_1[3];
1792 uint16_t pri_fcf_vlan_id;
1793 uint8_t pri_fcf_fabric_name[8];
1794 uint16_t reserved_2[7];
1795 uint8_t spma_mac_addr[6];
1796 uint16_t reserved_3[14];
1797 };
1798
1799 #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000
1800 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000
1801
1802 /* FCP priority config defines *************************************/
1803 /* operations */
1804 #define QLFC_FCP_PRIO_DISABLE 0x0
1805 #define QLFC_FCP_PRIO_ENABLE 0x1
1806 #define QLFC_FCP_PRIO_GET_CONFIG 0x2
1807 #define QLFC_FCP_PRIO_SET_CONFIG 0x3
1808
1809 struct qla_fcp_prio_entry {
1810 uint16_t flags; /* Describes parameter(s) in FCP */
1811 /* priority entry that are valid */
1812 #define FCP_PRIO_ENTRY_VALID 0x1
1813 #define FCP_PRIO_ENTRY_TAG_VALID 0x2
1814 #define FCP_PRIO_ENTRY_SPID_VALID 0x4
1815 #define FCP_PRIO_ENTRY_DPID_VALID 0x8
1816 #define FCP_PRIO_ENTRY_LUNB_VALID 0x10
1817 #define FCP_PRIO_ENTRY_LUNE_VALID 0x20
1818 #define FCP_PRIO_ENTRY_SWWN_VALID 0x40
1819 #define FCP_PRIO_ENTRY_DWWN_VALID 0x80
1820 uint8_t tag; /* Priority value */
1821 uint8_t reserved; /* Reserved for future use */
1822 uint32_t src_pid; /* Src port id. high order byte */
1823 /* unused; -1 (wild card) */
1824 uint32_t dst_pid; /* Src port id. high order byte */
1825 /* unused; -1 (wild card) */
1826 uint16_t lun_beg; /* 1st lun num of lun range. */
1827 /* -1 (wild card) */
1828 uint16_t lun_end; /* 2nd lun num of lun range. */
1829 /* -1 (wild card) */
1830 uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */
1831 uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */
1832 };
1833
1834 struct qla_fcp_prio_cfg {
1835 uint8_t signature[4]; /* "HQOS" signature of config data */
1836 uint16_t version; /* 1: Initial version */
1837 uint16_t length; /* config data size in num bytes */
1838 uint16_t checksum; /* config data bytes checksum */
1839 uint16_t num_entries; /* Number of entries */
1840 uint16_t size_of_entry; /* Size of each entry in num bytes */
1841 uint8_t attributes; /* enable/disable, persistence */
1842 #define FCP_PRIO_ATTR_DISABLE 0x0
1843 #define FCP_PRIO_ATTR_ENABLE 0x1
1844 #define FCP_PRIO_ATTR_PERSIST 0x2
1845 uint8_t reserved; /* Reserved for future use */
1846 #define FCP_PRIO_CFG_HDR_SIZE 0x10
1847 struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */
1848 #define FCP_PRIO_CFG_ENTRY_SIZE 0x20
1849 };
1850
1851 #define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/
1852
1853 /* 25XX Support ****************************************************/
1854 #define FA_FCP_PRIO0_ADDR_25 0x3C000
1855 #define FA_FCP_PRIO1_ADDR_25 0x3E000
1856
1857 /* 81XX Flash locations -- occupies second 2MB region. */
1858 #define FA_BOOT_CODE_ADDR_81 0x80000
1859 #define FA_RISC_CODE_ADDR_81 0xA0000
1860 #define FA_FW_AREA_ADDR_81 0xC0000
1861 #define FA_VPD_NVRAM_ADDR_81 0xD0000
1862 #define FA_VPD0_ADDR_81 0xD0000
1863 #define FA_VPD1_ADDR_81 0xD0400
1864 #define FA_NVRAM0_ADDR_81 0xD0080
1865 #define FA_NVRAM1_ADDR_81 0xD0180
1866 #define FA_FEATURE_ADDR_81 0xD4000
1867 #define FA_FLASH_DESCR_ADDR_81 0xD8000
1868 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400
1869 #define FA_HW_EVENT0_ADDR_81 0xDC000
1870 #define FA_HW_EVENT1_ADDR_81 0xDC400
1871 #define FA_NPIV_CONF0_ADDR_81 0xD1000
1872 #define FA_NPIV_CONF1_ADDR_81 0xD2000
1873
1874 #endif