2 * linux/drivers/s390/cio/qdio.h
4 * Copyright 2000,2008 IBM Corp.
5 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
6 * Jan Glauber <jang@linux.vnet.ibm.com>
12 #include <asm/schid.h>
13 #include <asm/debug.h>
16 #define QDIO_BUSY_BIT_PATIENCE 100 /* 100 microseconds */
17 #define QDIO_INPUT_THRESHOLD 500 /* 500 microseconds */
20 * if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait
21 * till next initiative to give transmitted skbs back to the stack is too long.
22 * Therefore polling is started in case of multicast queue is filled more
25 #define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */
27 enum qdio_irq_states
{
28 QDIO_IRQ_STATE_INACTIVE
,
29 QDIO_IRQ_STATE_ESTABLISHED
,
30 QDIO_IRQ_STATE_ACTIVE
,
31 QDIO_IRQ_STATE_STOPPED
,
32 QDIO_IRQ_STATE_CLEANUP
,
37 /* used as intparm in do_IO */
38 #define QDIO_DOING_ESTABLISH 1
39 #define QDIO_DOING_ACTIVATE 2
40 #define QDIO_DOING_CLEANUP 3
42 #define SLSB_STATE_NOT_INIT 0x0
43 #define SLSB_STATE_EMPTY 0x1
44 #define SLSB_STATE_PRIMED 0x2
45 #define SLSB_STATE_HALTED 0xe
46 #define SLSB_STATE_ERROR 0xf
47 #define SLSB_TYPE_INPUT 0x0
48 #define SLSB_TYPE_OUTPUT 0x20
49 #define SLSB_OWNER_PROG 0x80
50 #define SLSB_OWNER_CU 0x40
52 #define SLSB_P_INPUT_NOT_INIT \
53 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_NOT_INIT) /* 0x80 */
54 #define SLSB_P_INPUT_ACK \
55 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x81 */
56 #define SLSB_CU_INPUT_EMPTY \
57 (SLSB_OWNER_CU | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x41 */
58 #define SLSB_P_INPUT_PRIMED \
59 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_PRIMED) /* 0x82 */
60 #define SLSB_P_INPUT_HALTED \
61 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_HALTED) /* 0x8e */
62 #define SLSB_P_INPUT_ERROR \
63 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_ERROR) /* 0x8f */
64 #define SLSB_P_OUTPUT_NOT_INIT \
65 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_NOT_INIT) /* 0xa0 */
66 #define SLSB_P_OUTPUT_EMPTY \
67 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_EMPTY) /* 0xa1 */
68 #define SLSB_CU_OUTPUT_PRIMED \
69 (SLSB_OWNER_CU | SLSB_TYPE_OUTPUT | SLSB_STATE_PRIMED) /* 0x62 */
70 #define SLSB_P_OUTPUT_HALTED \
71 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_HALTED) /* 0xae */
72 #define SLSB_P_OUTPUT_ERROR \
73 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_ERROR) /* 0xaf */
75 #define SLSB_ERROR_DURING_LOOKUP 0xff
77 /* additional CIWs returned by extended Sense-ID */
78 #define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */
79 #define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */
81 /* flags for st qdio sch data */
82 #define CHSC_FLAG_QDIO_CAPABILITY 0x80
83 #define CHSC_FLAG_VALIDITY 0x40
85 /* qdio adapter-characteristics-1 flag */
86 #define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */
87 #define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */
88 #define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */
89 #define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */
90 #define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */
91 #define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */
92 #define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */
95 static inline int do_sqbs(u64 token
, unsigned char state
, int queue
,
96 int *start
, int *count
)
98 register unsigned long _ccq
asm ("0") = *count
;
99 register unsigned long _token
asm ("1") = token
;
100 unsigned long _queuestart
= ((unsigned long)queue
<< 32) | *start
;
103 " .insn rsy,0xeb000000008A,%1,0,0(%2)"
104 : "+d" (_ccq
), "+d" (_queuestart
)
105 : "d" ((unsigned long)state
), "d" (_token
)
107 *count
= _ccq
& 0xff;
108 *start
= _queuestart
& 0xff;
110 return (_ccq
>> 32) & 0xff;
113 static inline int do_eqbs(u64 token
, unsigned char *state
, int queue
,
114 int *start
, int *count
, int ack
)
116 register unsigned long _ccq
asm ("0") = *count
;
117 register unsigned long _token
asm ("1") = token
;
118 unsigned long _queuestart
= ((unsigned long)queue
<< 32) | *start
;
119 unsigned long _state
= (unsigned long)ack
<< 63;
122 " .insn rrf,0xB99c0000,%1,%2,0,0"
123 : "+d" (_ccq
), "+d" (_queuestart
), "+d" (_state
)
126 *count
= _ccq
& 0xff;
127 *start
= _queuestart
& 0xff;
128 *state
= _state
& 0xff;
130 return (_ccq
>> 32) & 0xff;
133 static inline int do_sqbs(u64 token
, unsigned char state
, int queue
,
134 int *start
, int *count
) { return 0; }
135 static inline int do_eqbs(u64 token
, unsigned char *state
, int queue
,
136 int *start
, int *count
, int ack
) { return 0; }
137 #endif /* CONFIG_64BIT */
147 u8 no_sync_out_pci
:1;
149 } __attribute__ ((packed
));
151 struct chsc_ssqd_area
{
152 struct chsc_header request
;
160 struct chsc_header response
;
162 struct qdio_ssqd_desc qdio_ssqd
;
163 } __attribute__ ((packed
));
166 struct chsc_header request
;
171 u64 summary_indicator_addr
;
172 u64 subchannel_indicator_addr
;
179 struct subchannel_id schid
;
181 struct chsc_header response
;
183 } __attribute__ ((packed
));
185 struct qdio_input_q
{
186 /* input buffer acknowledgement flag */
189 /* first ACK'ed buffer */
192 /* how much sbals are acknowledged with qebsm */
195 /* last time of noticing incoming data */
199 struct qdio_output_q
{
200 /* PCIs are enabled for the queue */
203 /* IQDIO: output multiple buffers (enhanced SIGA) */
206 /* timer to check for more outbound work */
207 struct timer_list timer
;
213 struct qdio_input_q in
;
214 struct qdio_output_q out
;
220 /* bitmask of queue number */
223 /* input or output queue */
226 /* list of thinint input queues */
227 struct list_head entry
;
229 /* upper-layer program handler */
230 qdio_handler_t (*handler
);
233 * inbound: next buffer the program should check for
234 * outbound: next buffer to check for having been processed
239 /* first_to_check of the last time */
242 /* beginning position for calling the program */
245 /* number of buffers in use by the adapter */
246 atomic_t nr_buf_used
;
248 struct qdio_irq
*irq_ptr
;
249 struct tasklet_struct tasklet
;
251 /* error condition during a data transfer */
252 unsigned int qdio_error
;
255 struct qdio_buffer
*sbal
[QDIO_MAX_BUFFERS_PER_Q
];
258 * Warning: Leave this member at the end so it won't be cleared in
259 * qdio_fill_qs. A page is allocated under this pointer and used for
260 * slib and sl. slib is 2048 bytes big and sl points to offset
264 } __attribute__ ((aligned(256)));
268 u32
*dsci
; /* address of device state change indicator */
269 struct ccw_device
*cdev
;
271 unsigned long int_parm
;
272 struct subchannel_id schid
;
273 unsigned long sch_token
; /* QEBSM facility */
275 enum qdio_irq_states state
;
277 struct siga_flag siga_flag
; /* siga sync information from qdioac */
286 struct qdio_ssqd_desc ssqd_desc
;
288 void (*orig_handler
) (struct ccw_device
*, unsigned long, struct irb
*);
291 * Warning: Leave these members together at the end so they won't be
292 * cleared in qdio_setup_irq.
295 unsigned long chsc_page
;
297 struct qdio_q
*input_qs
[QDIO_MAX_QUEUES_PER_IRQ
];
298 struct qdio_q
*output_qs
[QDIO_MAX_QUEUES_PER_IRQ
];
300 debug_info_t
*debug_area
;
301 struct mutex setup_mutex
;
304 /* helper functions */
305 #define queue_type(q) q->irq_ptr->qib.qfmt
306 #define SCH_NO(q) (q->irq_ptr->schid.sch_no)
308 #define is_thinint_irq(irq) \
309 (irq->qib.qfmt == QDIO_IQDIO_QFMT || \
310 css_general_characteristics.aif_osa)
312 /* the highest iqdio queue is used for multicast */
313 static inline int multicast_outbound(struct qdio_q
*q
)
315 return (q
->irq_ptr
->nr_output_qs
> 1) &&
316 (q
->nr
== q
->irq_ptr
->nr_output_qs
- 1);
319 static inline unsigned long long get_usecs(void)
321 return monotonic_clock() >> 12;
324 #define pci_out_supported(q) \
325 (q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)
326 #define is_qebsm(q) (q->irq_ptr->sch_token != 0)
328 #define need_siga_sync_thinint(q) (!q->irq_ptr->siga_flag.no_sync_ti)
329 #define need_siga_sync_out_thinint(q) (!q->irq_ptr->siga_flag.no_sync_out_ti)
330 #define need_siga_in(q) (q->irq_ptr->siga_flag.input)
331 #define need_siga_out(q) (q->irq_ptr->siga_flag.output)
332 #define need_siga_sync(q) (q->irq_ptr->siga_flag.sync)
333 #define siga_syncs_out_pci(q) (q->irq_ptr->siga_flag.no_sync_out_pci)
335 #define for_each_input_queue(irq_ptr, q, i) \
336 for (i = 0, q = irq_ptr->input_qs[0]; \
337 i < irq_ptr->nr_input_qs; \
338 q = irq_ptr->input_qs[++i])
339 #define for_each_output_queue(irq_ptr, q, i) \
340 for (i = 0, q = irq_ptr->output_qs[0]; \
341 i < irq_ptr->nr_output_qs; \
342 q = irq_ptr->output_qs[++i])
344 #define prev_buf(bufnr) \
345 ((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
346 #define next_buf(bufnr) \
347 ((bufnr + 1) & QDIO_MAX_BUFFERS_MASK)
348 #define add_buf(bufnr, inc) \
349 ((bufnr + inc) & QDIO_MAX_BUFFERS_MASK)
350 #define sub_buf(bufnr, dec) \
351 ((bufnr - dec) & QDIO_MAX_BUFFERS_MASK)
353 /* prototypes for thin interrupt */
354 void qdio_sync_after_thinint(struct qdio_q
*q
);
355 int get_buf_state(struct qdio_q
*q
, unsigned int bufnr
, unsigned char *state
,
357 void qdio_check_outbound_after_thinint(struct qdio_q
*q
);
358 int qdio_inbound_q_moved(struct qdio_q
*q
);
359 void qdio_kick_handler(struct qdio_q
*q
);
360 void qdio_stop_polling(struct qdio_q
*q
);
361 int qdio_siga_sync_q(struct qdio_q
*q
);
363 void qdio_setup_thinint(struct qdio_irq
*irq_ptr
);
364 int qdio_establish_thinint(struct qdio_irq
*irq_ptr
);
365 void qdio_shutdown_thinint(struct qdio_irq
*irq_ptr
);
366 void tiqdio_add_input_queues(struct qdio_irq
*irq_ptr
);
367 void tiqdio_remove_input_queues(struct qdio_irq
*irq_ptr
);
368 void tiqdio_inbound_processing(unsigned long q
);
369 int tiqdio_allocate_memory(void);
370 void tiqdio_free_memory(void);
371 int tiqdio_register_thinints(void);
372 void tiqdio_unregister_thinints(void);
374 /* prototypes for setup */
375 void qdio_inbound_processing(unsigned long data
);
376 void qdio_outbound_processing(unsigned long data
);
377 void qdio_outbound_timer(unsigned long data
);
378 void qdio_int_handler(struct ccw_device
*cdev
, unsigned long intparm
,
380 int qdio_allocate_qs(struct qdio_irq
*irq_ptr
, int nr_input_qs
,
382 void qdio_setup_ssqd_info(struct qdio_irq
*irq_ptr
);
383 int qdio_setup_get_ssqd(struct qdio_irq
*irq_ptr
,
384 struct subchannel_id
*schid
,
385 struct qdio_ssqd_desc
*data
);
386 int qdio_setup_irq(struct qdio_initialize
*init_data
);
387 void qdio_print_subchannel_info(struct qdio_irq
*irq_ptr
,
388 struct ccw_device
*cdev
);
389 void qdio_release_memory(struct qdio_irq
*irq_ptr
);
390 int qdio_setup_create_sysfs(struct ccw_device
*cdev
);
391 void qdio_setup_destroy_sysfs(struct ccw_device
*cdev
);
392 int qdio_setup_init(void);
393 void qdio_setup_exit(void);
395 #endif /* _CIO_QDIO_H */