i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / ata / pata_ns87410.c
blob31d5986537a33986a8527595a63e93fb22806139
1 /*
2 * pata_ns87410.c - National Semiconductor 87410 PATA for new ATA layer
3 * (C) 2006 Red Hat Inc
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2, or (at your option)
8 * any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; see the file COPYING. If not, write to
17 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/pci.h>
23 #include <linux/init.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <scsi/scsi_host.h>
27 #include <linux/libata.h>
29 #define DRV_NAME "pata_ns87410"
30 #define DRV_VERSION "0.4.6"
32 /**
33 * ns87410_pre_reset - probe begin
34 * @link: ATA link
35 * @deadline: deadline jiffies for the operation
37 * Check enabled ports
40 static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
42 struct ata_port *ap = link->ap;
43 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
44 static const struct pci_bits ns87410_enable_bits[] = {
45 { 0x43, 1, 0x08, 0x08 },
46 { 0x47, 1, 0x08, 0x08 }
49 if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
50 return -ENOENT;
52 return ata_sff_prereset(link, deadline);
55 /**
56 * ns87410_set_piomode - set initial PIO mode data
57 * @ap: ATA interface
58 * @adev: ATA device
60 * Program timing data. This is kept per channel not per device,
61 * and only affects the data port.
64 static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
66 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
67 int port = 0x40 + 4 * ap->port_no;
68 u8 idetcr, idefr;
69 struct ata_timing at;
71 static const u8 activebits[15] = {
72 0, 1, 2, 3, 4,
73 5, 5, 6, 6, 6,
74 6, 7, 7, 7, 7
77 static const u8 recoverbits[12] = {
78 0, 1, 2, 3, 4, 5, 6, 6, 7, 7, 7, 7
81 pci_read_config_byte(pdev, port + 3, &idefr);
83 if (ata_pio_need_iordy(adev))
84 idefr |= 0x04; /* IORDY enable */
85 else
86 idefr &= ~0x04;
88 if (ata_timing_compute(adev, adev->pio_mode, &at, 30303, 1) < 0) {
89 dev_err(&pdev->dev, "unknown mode %d\n", adev->pio_mode);
90 return;
93 at.active = clamp_val(at.active, 2, 16) - 2;
94 at.setup = clamp_val(at.setup, 1, 4) - 1;
95 at.recover = clamp_val(at.recover, 1, 12) - 1;
97 idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
99 pci_write_config_byte(pdev, port, idetcr);
100 pci_write_config_byte(pdev, port + 3, idefr);
101 /* We use ap->private_data as a pointer to the device currently
102 loaded for timing */
103 ap->private_data = adev;
107 * ns87410_qc_issue - command issue
108 * @qc: command pending
110 * Called when the libata layer is about to issue a command. We wrap
111 * this interface so that we can load the correct ATA timings if
112 * necessary.
115 static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
117 struct ata_port *ap = qc->ap;
118 struct ata_device *adev = qc->dev;
120 /* If modes have been configured and the channel data is not loaded
121 then load it. We have to check if pio_mode is set as the core code
122 does not set adev->pio_mode to XFER_PIO_0 while probing as would be
123 logical */
125 if (adev->pio_mode && adev != ap->private_data)
126 ns87410_set_piomode(ap, adev);
128 return ata_sff_qc_issue(qc);
131 static struct scsi_host_template ns87410_sht = {
132 ATA_PIO_SHT(DRV_NAME),
135 static struct ata_port_operations ns87410_port_ops = {
136 .inherits = &ata_sff_port_ops,
137 .qc_issue = ns87410_qc_issue,
138 .cable_detect = ata_cable_40wire,
139 .set_piomode = ns87410_set_piomode,
140 .prereset = ns87410_pre_reset,
143 static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
145 static const struct ata_port_info info = {
146 .flags = ATA_FLAG_SLAVE_POSS,
147 .pio_mask = ATA_PIO3,
148 .port_ops = &ns87410_port_ops
150 const struct ata_port_info *ppi[] = { &info, NULL };
151 return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0);
154 static const struct pci_device_id ns87410[] = {
155 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), },
157 { },
160 static struct pci_driver ns87410_pci_driver = {
161 .name = DRV_NAME,
162 .id_table = ns87410,
163 .probe = ns87410_init_one,
164 .remove = ata_pci_remove_one,
165 #ifdef CONFIG_PM
166 .suspend = ata_pci_device_suspend,
167 .resume = ata_pci_device_resume,
168 #endif
171 static int __init ns87410_init(void)
173 return pci_register_driver(&ns87410_pci_driver);
176 static void __exit ns87410_exit(void)
178 pci_unregister_driver(&ns87410_pci_driver);
181 MODULE_AUTHOR("Alan Cox");
182 MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");
183 MODULE_LICENSE("GPL");
184 MODULE_DEVICE_TABLE(pci, ns87410);
185 MODULE_VERSION(DRV_VERSION);
187 module_init(ns87410_init);
188 module_exit(ns87410_exit);