drivers/ata/pata_triflex.c

   1 /*
   2  * pata_triflex.c       - Compaq PATA for new ATA layer
   3  *                        (C) 2005 Red Hat Inc
   4  *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
   5  *
   6  * based upon
   7  *
   8  * triflex.c
   9  *
  10  * IDE Chipset driver for the Compaq TriFlex IDE controller.
  11  *
  12  * Known to work with the Compaq Workstation 5x00 series.
  13  *
  14  * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
  15  * Author: Torben Mathiasen <torben.mathiasen@hp.com>
  16  *
  17  * This program is free software; you can redistribute it and/or modify
  18  * it under the terms of the GNU General Public License version 2 as
  19  * published by the Free Software Foundation.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, write to the Free Software
  28  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  29  *
  30  * Loosely based on the piix & svwks drivers.
  31  *
  32  * Documentation:
  33  *      Not publicly available.
  34  */
  35
  36 #include <linux/kernel.h>
  37 #include <linux/module.h>
  38 #include <linux/pci.h>
  39 #include <linux/init.h>
  40 #include <linux/blkdev.h>
  41 #include <linux/delay.h>
  42 #include <scsi/scsi_host.h>
  43 #include <linux/libata.h>
  44
  45 #define DRV_NAME "pata_triflex"
  46 #define DRV_VERSION "0.2.8"
  47
  48 /**
  49  *      triflex_prereset                -       probe begin
  50  *      @link: ATA link
  51  *      @deadline: deadline jiffies for the operation
  52  *
  53  *      Set up cable type and use generic probe init
  54  */
  55
  56 static int triflex_prereset(struct ata_link *link, unsigned long deadline)
  57 {
  58         static const struct pci_bits triflex_enable_bits[] = {
  59                 { 0x80, 1, 0x01, 0x01 },
  60                 { 0x80, 1, 0x02, 0x02 }
  61         };
  62
  63         struct ata_port *ap = link->ap;
  64         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  65
  66         if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
  67                 return -ENOENT;
  68
  69         return ata_sff_prereset(link, deadline);
  70 }
  71
  72
  73
  74 /**
  75  *      triflex_load_timing             -       timing configuration
  76  *      @ap: ATA interface
  77  *      @adev: Device on the bus
  78  *      @speed: speed to configure
  79  *
  80  *      The Triflex has one set of timings per device per channel. This
  81  *      means we must do some switching. As the PIO and DMA timings don't
  82  *      match we have to do some reloading unlike PIIX devices where tuning
  83  *      tricks can avoid it.
  84  */
  85
  86 static void triflex_load_timing(struct ata_port *ap, struct ata_device *adev, int speed)
  87 {
  88         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  89         u32 timing = 0;
  90         u32 triflex_timing, old_triflex_timing;
  91         int channel_offset = ap->port_no ? 0x74: 0x70;
  92         unsigned int is_slave   = (adev->devno != 0);
  93
  94
  95         pci_read_config_dword(pdev, channel_offset, &old_triflex_timing);
  96         triflex_timing = old_triflex_timing;
  97
  98         switch(speed)
  99         {
 100                 case XFER_MW_DMA_2:
 101                         timing = 0x0103;break;
 102                 case XFER_MW_DMA_1:
 103                         timing = 0x0203;break;
 104                 case XFER_MW_DMA_0:
 105                         timing = 0x0808;break;
 106                 case XFER_SW_DMA_2:
 107                 case XFER_SW_DMA_1:
 108                 case XFER_SW_DMA_0:
 109                         timing = 0x0F0F;break;
 110                 case XFER_PIO_4:
 111                         timing = 0x0202;break;
 112                 case XFER_PIO_3:
 113                         timing = 0x0204;break;
 114                 case XFER_PIO_2:
 115                         timing = 0x0404;break;
 116                 case XFER_PIO_1:
 117                         timing = 0x0508;break;
 118                 case XFER_PIO_0:
 119                         timing = 0x0808;break;
 120                 default:
 121                         BUG();
 122         }
 123         triflex_timing &= ~ (0xFFFF << (16 * is_slave));
 124         triflex_timing |= (timing << (16 * is_slave));
 125
 126         if (triflex_timing != old_triflex_timing)
 127                 pci_write_config_dword(pdev, channel_offset, triflex_timing);
 128 }
 129
 130 /**
 131  *      triflex_set_piomode     -       set initial PIO mode data
 132  *      @ap: ATA interface
 133  *      @adev: ATA device
 134  *
 135  *      Use the timing loader to set up the PIO mode. We have to do this
 136  *      because DMA start/stop will only be called once DMA occurs. If there
 137  *      has been no DMA then the PIO timings are still needed.
 138  */
 139 static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev)
 140 {
 141         triflex_load_timing(ap, adev, adev->pio_mode);
 142 }
 143
 144 /**
 145  *      triflex_dma_start       -       DMA start callback
 146  *      @qc: Command in progress
 147  *
 148  *      Usually drivers set the DMA timing at the point the set_dmamode call
 149  *      is made. Triflex however requires we load new timings on the
 150  *      transition or keep matching PIO/DMA pairs (ie MWDMA2/PIO4 etc).
 151  *      We load the DMA timings just before starting DMA and then restore
 152  *      the PIO timing when the DMA is finished.
 153  */
 154
 155 static void triflex_bmdma_start(struct ata_queued_cmd *qc)
 156 {
 157         triflex_load_timing(qc->ap, qc->dev, qc->dev->dma_mode);
 158         ata_bmdma_start(qc);
 159 }
 160
 161 /**
 162  *      triflex_dma_stop        -       DMA stop callback
 163  *      @ap: ATA interface
 164  *      @adev: ATA device
 165  *
 166  *      We loaded new timings in dma_start, as a result we need to restore
 167  *      the PIO timings in dma_stop so that the next command issue gets the
 168  *      right clock values.
 169  */
 170
 171 static void triflex_bmdma_stop(struct ata_queued_cmd *qc)
 172 {
 173         ata_bmdma_stop(qc);
 174         triflex_load_timing(qc->ap, qc->dev, qc->dev->pio_mode);
 175 }
 176
 177 static struct scsi_host_template triflex_sht = {
 178         ATA_BMDMA_SHT(DRV_NAME),
 179 };
 180
 181 static struct ata_port_operations triflex_port_ops = {
 182         .inherits       = &ata_bmdma_port_ops,
 183         .bmdma_start    = triflex_bmdma_start,
 184         .bmdma_stop     = triflex_bmdma_stop,
 185         .cable_detect   = ata_cable_40wire,
 186         .set_piomode    = triflex_set_piomode,
 187         .prereset       = triflex_prereset,
 188 };
 189
 190 static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 191 {
 192         static const struct ata_port_info info = {
 193                 .flags = ATA_FLAG_SLAVE_POSS,
 194                 .pio_mask = ATA_PIO4,
 195                 .mwdma_mask = ATA_MWDMA2,
 196                 .port_ops = &triflex_port_ops
 197         };
 198         const struct ata_port_info *ppi[] = { &info, NULL };
 199
 200         ata_print_version_once(&dev->dev, DRV_VERSION);
 201
 202         return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0);
 203 }
 204
 205 static const struct pci_device_id triflex[] = {
 206         { PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), },
 207
 208         { },
 209 };
 210
 211 #ifdef CONFIG_PM
 212 static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 213 {
 214         struct ata_host *host = dev_get_drvdata(&pdev->dev);
 215         int rc = 0;
 216
 217         rc = ata_host_suspend(host, mesg);
 218         if (rc)
 219                 return rc;
 220
 221         /*
 222          * We must not disable or powerdown the device.
 223          * APM bios refuses to suspend if IDE is not accessible.
 224          */
 225         pci_save_state(pdev);
 226
 227         return 0;
 228 }
 229
 230 #endif
 231
 232 static struct pci_driver triflex_pci_driver = {
 233         .name           = DRV_NAME,
 234         .id_table       = triflex,
 235         .probe          = triflex_init_one,
 236         .remove         = ata_pci_remove_one,
 237 #ifdef CONFIG_PM
 238         .suspend        = triflex_ata_pci_device_suspend,
 239         .resume         = ata_pci_device_resume,
 240 #endif
 241 };
 242
 243 static int __init triflex_init(void)
 244 {
 245         return pci_register_driver(&triflex_pci_driver);
 246 }
 247
 248 static void __exit triflex_exit(void)
 249 {
 250         pci_unregister_driver(&triflex_pci_driver);
 251 }
 252
 253 MODULE_AUTHOR("Alan Cox");
 254 MODULE_DESCRIPTION("low-level driver for Compaq Triflex");
 255 MODULE_LICENSE("GPL");
 256 MODULE_DEVICE_TABLE(pci, triflex);
 257 MODULE_VERSION(DRV_VERSION);
 258
 259 module_init(triflex_init);
 260 module_exit(triflex_exit);