i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / atm / solos-pci.c
blobe8cd652d20178c7c3ff8465aac997f1f65e20f63
1 /*
2 * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
3 * Traverse Technologies -- http://www.traverse.com.au/
4 * Xrio Limited -- http://www.xrio.com/
7 * Copyright © 2008 Traverse Technologies
8 * Copyright © 2008 Intel Corporation
10 * Authors: Nathan Williams <nathan@traverse.com.au>
11 * David Woodhouse <dwmw2@infradead.org>
12 * Treker Chen <treker@xrio.com>
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License
16 * version 2, as published by the Free Software Foundation.
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
24 #define DEBUG
25 #define VERBOSE_DEBUG
27 #include <linux/interrupt.h>
28 #include <linux/module.h>
29 #include <linux/kernel.h>
30 #include <linux/errno.h>
31 #include <linux/ioport.h>
32 #include <linux/types.h>
33 #include <linux/pci.h>
34 #include <linux/atm.h>
35 #include <linux/atmdev.h>
36 #include <linux/skbuff.h>
37 #include <linux/sysfs.h>
38 #include <linux/device.h>
39 #include <linux/kobject.h>
40 #include <linux/firmware.h>
41 #include <linux/ctype.h>
42 #include <linux/swab.h>
43 #include <linux/slab.h>
45 #define VERSION "0.07"
46 #define PTAG "solos-pci"
48 #define CONFIG_RAM_SIZE 128
49 #define FLAGS_ADDR 0x7C
50 #define IRQ_EN_ADDR 0x78
51 #define FPGA_VER 0x74
52 #define IRQ_CLEAR 0x70
53 #define WRITE_FLASH 0x6C
54 #define PORTS 0x68
55 #define FLASH_BLOCK 0x64
56 #define FLASH_BUSY 0x60
57 #define FPGA_MODE 0x5C
58 #define FLASH_MODE 0x58
59 #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
60 #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
62 #define DATA_RAM_SIZE 32768
63 #define BUF_SIZE 2048
64 #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
65 #define FPGA_PAGE 528 /* FPGA flash page size*/
66 #define SOLOS_PAGE 512 /* Solos flash page size*/
67 #define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
68 #define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
70 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
71 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
72 #define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
74 #define RX_DMA_SIZE 2048
76 #define FPGA_VERSION(a,b) (((a) << 8) + (b))
77 #define LEGACY_BUFFERS 2
78 #define DMA_SUPPORTED 4
80 static int reset = 0;
81 static int atmdebug = 0;
82 static int firmware_upgrade = 0;
83 static int fpga_upgrade = 0;
84 static int db_firmware_upgrade = 0;
85 static int db_fpga_upgrade = 0;
87 struct pkt_hdr {
88 __le16 size;
89 __le16 vpi;
90 __le16 vci;
91 __le16 type;
94 struct solos_skb_cb {
95 struct atm_vcc *vcc;
96 uint32_t dma_addr;
100 #define SKB_CB(skb) ((struct solos_skb_cb *)skb->cb)
102 #define PKT_DATA 0
103 #define PKT_COMMAND 1
104 #define PKT_POPEN 3
105 #define PKT_PCLOSE 4
106 #define PKT_STATUS 5
108 struct solos_card {
109 void __iomem *config_regs;
110 void __iomem *buffers;
111 int nr_ports;
112 int tx_mask;
113 struct pci_dev *dev;
114 struct atm_dev *atmdev[4];
115 struct tasklet_struct tlet;
116 spinlock_t tx_lock;
117 spinlock_t tx_queue_lock;
118 spinlock_t cli_queue_lock;
119 spinlock_t param_queue_lock;
120 struct list_head param_queue;
121 struct sk_buff_head tx_queue[4];
122 struct sk_buff_head cli_queue[4];
123 struct sk_buff *tx_skb[4];
124 struct sk_buff *rx_skb[4];
125 wait_queue_head_t param_wq;
126 wait_queue_head_t fw_wq;
127 int using_dma;
128 int fpga_version;
129 int buffer_size;
133 struct solos_param {
134 struct list_head list;
135 pid_t pid;
136 int port;
137 struct sk_buff *response;
140 #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
142 MODULE_AUTHOR("Traverse Technologies <support@traverse.com.au>");
143 MODULE_DESCRIPTION("Solos PCI driver");
144 MODULE_VERSION(VERSION);
145 MODULE_LICENSE("GPL");
146 MODULE_FIRMWARE("solos-FPGA.bin");
147 MODULE_FIRMWARE("solos-Firmware.bin");
148 MODULE_FIRMWARE("solos-db-FPGA.bin");
149 MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
150 MODULE_PARM_DESC(atmdebug, "Print ATM data");
151 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
152 MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
153 MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
154 MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
155 module_param(reset, int, 0444);
156 module_param(atmdebug, int, 0644);
157 module_param(firmware_upgrade, int, 0444);
158 module_param(fpga_upgrade, int, 0444);
159 module_param(db_firmware_upgrade, int, 0444);
160 module_param(db_fpga_upgrade, int, 0444);
162 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
163 struct atm_vcc *vcc);
164 static uint32_t fpga_tx(struct solos_card *);
165 static irqreturn_t solos_irq(int irq, void *dev_id);
166 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
167 static int list_vccs(int vci);
168 static int atm_init(struct solos_card *, struct device *);
169 static void atm_remove(struct solos_card *);
170 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
171 static void solos_bh(unsigned long);
172 static int print_buffer(struct sk_buff *buf);
174 static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
176 if (vcc->pop)
177 vcc->pop(vcc, skb);
178 else
179 dev_kfree_skb_any(skb);
182 static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
183 char *buf)
185 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
186 struct solos_card *card = atmdev->dev_data;
187 struct solos_param prm;
188 struct sk_buff *skb;
189 struct pkt_hdr *header;
190 int buflen;
192 buflen = strlen(attr->attr.name) + 10;
194 skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
195 if (!skb) {
196 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
197 return -ENOMEM;
200 header = (void *)skb_put(skb, sizeof(*header));
202 buflen = snprintf((void *)&header[1], buflen - 1,
203 "L%05d\n%s\n", current->pid, attr->attr.name);
204 skb_put(skb, buflen);
206 header->size = cpu_to_le16(buflen);
207 header->vpi = cpu_to_le16(0);
208 header->vci = cpu_to_le16(0);
209 header->type = cpu_to_le16(PKT_COMMAND);
211 prm.pid = current->pid;
212 prm.response = NULL;
213 prm.port = SOLOS_CHAN(atmdev);
215 spin_lock_irq(&card->param_queue_lock);
216 list_add(&prm.list, &card->param_queue);
217 spin_unlock_irq(&card->param_queue_lock);
219 fpga_queue(card, prm.port, skb, NULL);
221 wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
223 spin_lock_irq(&card->param_queue_lock);
224 list_del(&prm.list);
225 spin_unlock_irq(&card->param_queue_lock);
227 if (!prm.response)
228 return -EIO;
230 buflen = prm.response->len;
231 memcpy(buf, prm.response->data, buflen);
232 kfree_skb(prm.response);
234 return buflen;
237 static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
238 const char *buf, size_t count)
240 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
241 struct solos_card *card = atmdev->dev_data;
242 struct solos_param prm;
243 struct sk_buff *skb;
244 struct pkt_hdr *header;
245 int buflen;
246 ssize_t ret;
248 buflen = strlen(attr->attr.name) + 11 + count;
250 skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
251 if (!skb) {
252 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
253 return -ENOMEM;
256 header = (void *)skb_put(skb, sizeof(*header));
258 buflen = snprintf((void *)&header[1], buflen - 1,
259 "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
261 skb_put(skb, buflen);
262 header->size = cpu_to_le16(buflen);
263 header->vpi = cpu_to_le16(0);
264 header->vci = cpu_to_le16(0);
265 header->type = cpu_to_le16(PKT_COMMAND);
267 prm.pid = current->pid;
268 prm.response = NULL;
269 prm.port = SOLOS_CHAN(atmdev);
271 spin_lock_irq(&card->param_queue_lock);
272 list_add(&prm.list, &card->param_queue);
273 spin_unlock_irq(&card->param_queue_lock);
275 fpga_queue(card, prm.port, skb, NULL);
277 wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
279 spin_lock_irq(&card->param_queue_lock);
280 list_del(&prm.list);
281 spin_unlock_irq(&card->param_queue_lock);
283 skb = prm.response;
285 if (!skb)
286 return -EIO;
288 buflen = skb->len;
290 /* Sometimes it has a newline, sometimes it doesn't. */
291 if (skb->data[buflen - 1] == '\n')
292 buflen--;
294 if (buflen == 2 && !strncmp(skb->data, "OK", 2))
295 ret = count;
296 else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
297 ret = -EIO;
298 else {
299 /* We know we have enough space allocated for this; we allocated
300 it ourselves */
301 skb->data[buflen] = 0;
303 dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
304 skb->data);
305 ret = -EIO;
307 kfree_skb(skb);
309 return ret;
312 static char *next_string(struct sk_buff *skb)
314 int i = 0;
315 char *this = skb->data;
317 for (i = 0; i < skb->len; i++) {
318 if (this[i] == '\n') {
319 this[i] = 0;
320 skb_pull(skb, i + 1);
321 return this;
323 if (!isprint(this[i]))
324 return NULL;
326 return NULL;
330 * Status packet has fields separated by \n, starting with a version number
331 * for the information therein. Fields are....
333 * packet version
334 * RxBitRate (version >= 1)
335 * TxBitRate (version >= 1)
336 * State (version >= 1)
337 * LocalSNRMargin (version >= 1)
338 * LocalLineAttn (version >= 1)
340 static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
342 char *str, *end, *state_str, *snr, *attn;
343 int ver, rate_up, rate_down;
345 if (!card->atmdev[port])
346 return -ENODEV;
348 str = next_string(skb);
349 if (!str)
350 return -EIO;
352 ver = simple_strtol(str, NULL, 10);
353 if (ver < 1) {
354 dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
355 ver);
356 return -EIO;
359 str = next_string(skb);
360 if (!str)
361 return -EIO;
362 if (!strcmp(str, "ERROR")) {
363 dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
364 port);
365 return 0;
368 rate_down = simple_strtol(str, &end, 10);
369 if (*end)
370 return -EIO;
372 str = next_string(skb);
373 if (!str)
374 return -EIO;
375 rate_up = simple_strtol(str, &end, 10);
376 if (*end)
377 return -EIO;
379 state_str = next_string(skb);
380 if (!state_str)
381 return -EIO;
383 /* Anything but 'Showtime' is down */
384 if (strcmp(state_str, "Showtime")) {
385 atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
386 dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
387 return 0;
390 snr = next_string(skb);
391 if (!snr)
392 return -EIO;
393 attn = next_string(skb);
394 if (!attn)
395 return -EIO;
397 dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
398 port, state_str, rate_down/1000, rate_up/1000,
399 snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
401 card->atmdev[port]->link_rate = rate_down / 424;
402 atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
404 return 0;
407 static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
409 struct solos_param *prm;
410 unsigned long flags;
411 int cmdpid;
412 int found = 0;
414 if (skb->len < 7)
415 return 0;
417 if (skb->data[0] != 'L' || !isdigit(skb->data[1]) ||
418 !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
419 !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
420 skb->data[6] != '\n')
421 return 0;
423 cmdpid = simple_strtol(&skb->data[1], NULL, 10);
425 spin_lock_irqsave(&card->param_queue_lock, flags);
426 list_for_each_entry(prm, &card->param_queue, list) {
427 if (prm->port == port && prm->pid == cmdpid) {
428 prm->response = skb;
429 skb_pull(skb, 7);
430 wake_up(&card->param_wq);
431 found = 1;
432 break;
435 spin_unlock_irqrestore(&card->param_queue_lock, flags);
436 return found;
439 static ssize_t console_show(struct device *dev, struct device_attribute *attr,
440 char *buf)
442 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
443 struct solos_card *card = atmdev->dev_data;
444 struct sk_buff *skb;
445 unsigned int len;
447 spin_lock(&card->cli_queue_lock);
448 skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
449 spin_unlock(&card->cli_queue_lock);
450 if(skb == NULL)
451 return sprintf(buf, "No data.\n");
453 len = skb->len;
454 memcpy(buf, skb->data, len);
455 dev_dbg(&card->dev->dev, "len: %d\n", len);
457 kfree_skb(skb);
458 return len;
461 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
463 struct sk_buff *skb;
464 struct pkt_hdr *header;
466 if (size > (BUF_SIZE - sizeof(*header))) {
467 dev_dbg(&card->dev->dev, "Command is too big. Dropping request\n");
468 return 0;
470 skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
471 if (!skb) {
472 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
473 return 0;
476 header = (void *)skb_put(skb, sizeof(*header));
478 header->size = cpu_to_le16(size);
479 header->vpi = cpu_to_le16(0);
480 header->vci = cpu_to_le16(0);
481 header->type = cpu_to_le16(PKT_COMMAND);
483 memcpy(skb_put(skb, size), buf, size);
485 fpga_queue(card, dev, skb, NULL);
487 return 0;
490 static ssize_t console_store(struct device *dev, struct device_attribute *attr,
491 const char *buf, size_t count)
493 struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
494 struct solos_card *card = atmdev->dev_data;
495 int err;
497 err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
499 return err?:count;
502 static DEVICE_ATTR(console, 0644, console_show, console_store);
505 #define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
506 #define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
508 #include "solos-attrlist.c"
510 #undef SOLOS_ATTR_RO
511 #undef SOLOS_ATTR_RW
513 #define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
514 #define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
516 static struct attribute *solos_attrs[] = {
517 #include "solos-attrlist.c"
518 NULL
521 static struct attribute_group solos_attr_group = {
522 .attrs = solos_attrs,
523 .name = "parameters",
526 static int flash_upgrade(struct solos_card *card, int chip)
528 const struct firmware *fw;
529 const char *fw_name;
530 int blocksize = 0;
531 int numblocks = 0;
532 int offset;
534 switch (chip) {
535 case 0:
536 fw_name = "solos-FPGA.bin";
537 blocksize = FPGA_BLOCK;
538 break;
539 case 1:
540 fw_name = "solos-Firmware.bin";
541 blocksize = SOLOS_BLOCK;
542 break;
543 case 2:
544 if (card->fpga_version > LEGACY_BUFFERS){
545 fw_name = "solos-db-FPGA.bin";
546 blocksize = FPGA_BLOCK;
547 } else {
548 dev_info(&card->dev->dev, "FPGA version doesn't support"
549 " daughter board upgrades\n");
550 return -EPERM;
552 break;
553 case 3:
554 if (card->fpga_version > LEGACY_BUFFERS){
555 fw_name = "solos-Firmware.bin";
556 blocksize = SOLOS_BLOCK;
557 } else {
558 dev_info(&card->dev->dev, "FPGA version doesn't support"
559 " daughter board upgrades\n");
560 return -EPERM;
562 break;
563 default:
564 return -ENODEV;
567 if (request_firmware(&fw, fw_name, &card->dev->dev))
568 return -ENOENT;
570 dev_info(&card->dev->dev, "Flash upgrade starting\n");
572 numblocks = fw->size / blocksize;
573 dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
574 dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
576 dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
577 iowrite32(1, card->config_regs + FPGA_MODE);
578 (void) ioread32(card->config_regs + FPGA_MODE);
580 /* Set mode to Chip Erase */
581 if(chip == 0 || chip == 2)
582 dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
583 if(chip == 1 || chip == 3)
584 dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
585 iowrite32((chip * 2), card->config_regs + FLASH_MODE);
588 iowrite32(1, card->config_regs + WRITE_FLASH);
589 wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
591 for (offset = 0; offset < fw->size; offset += blocksize) {
592 int i;
594 /* Clear write flag */
595 iowrite32(0, card->config_regs + WRITE_FLASH);
597 /* Set mode to Block Write */
598 /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
599 iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
601 /* Copy block to buffer, swapping each 16 bits */
602 for(i = 0; i < blocksize; i += 4) {
603 uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
604 if(card->fpga_version > LEGACY_BUFFERS)
605 iowrite32(word, FLASH_BUF + i);
606 else
607 iowrite32(word, RX_BUF(card, 3) + i);
610 /* Specify block number and then trigger flash write */
611 iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
612 iowrite32(1, card->config_regs + WRITE_FLASH);
613 wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
616 release_firmware(fw);
617 iowrite32(0, card->config_regs + WRITE_FLASH);
618 iowrite32(0, card->config_regs + FPGA_MODE);
619 iowrite32(0, card->config_regs + FLASH_MODE);
620 dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
621 return 0;
624 static irqreturn_t solos_irq(int irq, void *dev_id)
626 struct solos_card *card = dev_id;
627 int handled = 1;
629 iowrite32(0, card->config_regs + IRQ_CLEAR);
631 /* If we're up and running, just kick the tasklet to process TX/RX */
632 if (card->atmdev[0])
633 tasklet_schedule(&card->tlet);
634 else
635 wake_up(&card->fw_wq);
637 return IRQ_RETVAL(handled);
640 void solos_bh(unsigned long card_arg)
642 struct solos_card *card = (void *)card_arg;
643 uint32_t card_flags;
644 uint32_t rx_done = 0;
645 int port;
648 * Since fpga_tx() is going to need to read the flags under its lock,
649 * it can return them to us so that we don't have to hit PCI MMIO
650 * again for the same information
652 card_flags = fpga_tx(card);
654 for (port = 0; port < card->nr_ports; port++) {
655 if (card_flags & (0x10 << port)) {
656 struct pkt_hdr _hdr, *header;
657 struct sk_buff *skb;
658 struct atm_vcc *vcc;
659 int size;
661 if (card->using_dma) {
662 skb = card->rx_skb[port];
663 card->rx_skb[port] = NULL;
665 pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
666 RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
668 header = (void *)skb->data;
669 size = le16_to_cpu(header->size);
670 skb_put(skb, size + sizeof(*header));
671 skb_pull(skb, sizeof(*header));
672 } else {
673 header = &_hdr;
675 rx_done |= 0x10 << port;
677 memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
679 size = le16_to_cpu(header->size);
680 if (size > (card->buffer_size - sizeof(*header))){
681 dev_warn(&card->dev->dev, "Invalid buffer size\n");
682 continue;
685 skb = alloc_skb(size + 1, GFP_ATOMIC);
686 if (!skb) {
687 if (net_ratelimit())
688 dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
689 continue;
692 memcpy_fromio(skb_put(skb, size),
693 RX_BUF(card, port) + sizeof(*header),
694 size);
696 if (atmdebug) {
697 dev_info(&card->dev->dev, "Received: port %d\n", port);
698 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
699 size, le16_to_cpu(header->vpi),
700 le16_to_cpu(header->vci));
701 print_buffer(skb);
704 switch (le16_to_cpu(header->type)) {
705 case PKT_DATA:
706 vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
707 le16_to_cpu(header->vci));
708 if (!vcc) {
709 if (net_ratelimit())
710 dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
711 le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
712 port);
713 continue;
715 atm_charge(vcc, skb->truesize);
716 vcc->push(vcc, skb);
717 atomic_inc(&vcc->stats->rx);
718 break;
720 case PKT_STATUS:
721 if (process_status(card, port, skb) &&
722 net_ratelimit()) {
723 dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
724 print_buffer(skb);
726 dev_kfree_skb_any(skb);
727 break;
729 case PKT_COMMAND:
730 default: /* FIXME: Not really, surely? */
731 if (process_command(card, port, skb))
732 break;
733 spin_lock(&card->cli_queue_lock);
734 if (skb_queue_len(&card->cli_queue[port]) > 10) {
735 if (net_ratelimit())
736 dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
737 port);
738 dev_kfree_skb_any(skb);
739 } else
740 skb_queue_tail(&card->cli_queue[port], skb);
741 spin_unlock(&card->cli_queue_lock);
742 break;
745 /* Allocate RX skbs for any ports which need them */
746 if (card->using_dma && card->atmdev[port] &&
747 !card->rx_skb[port]) {
748 struct sk_buff *skb = alloc_skb(RX_DMA_SIZE, GFP_ATOMIC);
749 if (skb) {
750 SKB_CB(skb)->dma_addr =
751 pci_map_single(card->dev, skb->data,
752 RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
753 iowrite32(SKB_CB(skb)->dma_addr,
754 card->config_regs + RX_DMA_ADDR(port));
755 card->rx_skb[port] = skb;
756 } else {
757 if (net_ratelimit())
758 dev_warn(&card->dev->dev, "Failed to allocate RX skb");
760 /* We'll have to try again later */
761 tasklet_schedule(&card->tlet);
765 if (rx_done)
766 iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
768 return;
771 static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
773 struct hlist_head *head;
774 struct atm_vcc *vcc = NULL;
775 struct hlist_node *node;
776 struct sock *s;
778 read_lock(&vcc_sklist_lock);
779 head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
780 sk_for_each(s, node, head) {
781 vcc = atm_sk(s);
782 if (vcc->dev == dev && vcc->vci == vci &&
783 vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
784 test_bit(ATM_VF_READY, &vcc->flags))
785 goto out;
787 vcc = NULL;
788 out:
789 read_unlock(&vcc_sklist_lock);
790 return vcc;
793 static int list_vccs(int vci)
795 struct hlist_head *head;
796 struct atm_vcc *vcc;
797 struct hlist_node *node;
798 struct sock *s;
799 int num_found = 0;
800 int i;
802 read_lock(&vcc_sklist_lock);
803 if (vci != 0){
804 head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
805 sk_for_each(s, node, head) {
806 num_found ++;
807 vcc = atm_sk(s);
808 printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
809 vcc->dev->number,
810 vcc->vpi,
811 vcc->vci);
813 } else {
814 for(i = 0; i < VCC_HTABLE_SIZE; i++){
815 head = &vcc_hash[i];
816 sk_for_each(s, node, head) {
817 num_found ++;
818 vcc = atm_sk(s);
819 printk(KERN_DEBUG "Device: %d Vpi: %d Vci: %d\n",
820 vcc->dev->number,
821 vcc->vpi,
822 vcc->vci);
826 read_unlock(&vcc_sklist_lock);
827 return num_found;
831 static int popen(struct atm_vcc *vcc)
833 struct solos_card *card = vcc->dev->dev_data;
834 struct sk_buff *skb;
835 struct pkt_hdr *header;
837 if (vcc->qos.aal != ATM_AAL5) {
838 dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
839 vcc->qos.aal);
840 return -EINVAL;
843 skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
844 if (!skb) {
845 if (net_ratelimit())
846 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
847 return -ENOMEM;
849 header = (void *)skb_put(skb, sizeof(*header));
851 header->size = cpu_to_le16(0);
852 header->vpi = cpu_to_le16(vcc->vpi);
853 header->vci = cpu_to_le16(vcc->vci);
854 header->type = cpu_to_le16(PKT_POPEN);
856 fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
858 set_bit(ATM_VF_ADDR, &vcc->flags);
859 set_bit(ATM_VF_READY, &vcc->flags);
860 list_vccs(0);
863 return 0;
866 static void pclose(struct atm_vcc *vcc)
868 struct solos_card *card = vcc->dev->dev_data;
869 struct sk_buff *skb;
870 struct pkt_hdr *header;
872 skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
873 if (!skb) {
874 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
875 return;
877 header = (void *)skb_put(skb, sizeof(*header));
879 header->size = cpu_to_le16(0);
880 header->vpi = cpu_to_le16(vcc->vpi);
881 header->vci = cpu_to_le16(vcc->vci);
882 header->type = cpu_to_le16(PKT_PCLOSE);
884 fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
886 clear_bit(ATM_VF_ADDR, &vcc->flags);
887 clear_bit(ATM_VF_READY, &vcc->flags);
889 /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
890 tasklet has finished processing any incoming packets (and, more to
891 the point, using the vcc pointer). */
892 tasklet_unlock_wait(&card->tlet);
893 return;
896 static int print_buffer(struct sk_buff *buf)
898 int len,i;
899 char msg[500];
900 char item[10];
902 len = buf->len;
903 for (i = 0; i < len; i++){
904 if(i % 8 == 0)
905 sprintf(msg, "%02X: ", i);
907 sprintf(item,"%02X ",*(buf->data + i));
908 strcat(msg, item);
909 if(i % 8 == 7) {
910 sprintf(item, "\n");
911 strcat(msg, item);
912 printk(KERN_DEBUG "%s", msg);
915 if (i % 8 != 0) {
916 sprintf(item, "\n");
917 strcat(msg, item);
918 printk(KERN_DEBUG "%s", msg);
920 printk(KERN_DEBUG "\n");
922 return 0;
925 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
926 struct atm_vcc *vcc)
928 int old_len;
929 unsigned long flags;
931 SKB_CB(skb)->vcc = vcc;
933 spin_lock_irqsave(&card->tx_queue_lock, flags);
934 old_len = skb_queue_len(&card->tx_queue[port]);
935 skb_queue_tail(&card->tx_queue[port], skb);
936 if (!old_len)
937 card->tx_mask |= (1 << port);
938 spin_unlock_irqrestore(&card->tx_queue_lock, flags);
940 /* Theoretically we could just schedule the tasklet here, but
941 that introduces latency we don't want -- it's noticeable */
942 if (!old_len)
943 fpga_tx(card);
946 static uint32_t fpga_tx(struct solos_card *card)
948 uint32_t tx_pending, card_flags;
949 uint32_t tx_started = 0;
950 struct sk_buff *skb;
951 struct atm_vcc *vcc;
952 unsigned char port;
953 unsigned long flags;
955 spin_lock_irqsave(&card->tx_lock, flags);
957 card_flags = ioread32(card->config_regs + FLAGS_ADDR);
959 * The queue lock is required for _writing_ to tx_mask, but we're
960 * OK to read it here without locking. The only potential update
961 * that we could race with is in fpga_queue() where it sets a bit
962 * for a new port... but it's going to call this function again if
963 * it's doing that, anyway.
965 tx_pending = card->tx_mask & ~card_flags;
967 for (port = 0; tx_pending; tx_pending >>= 1, port++) {
968 if (tx_pending & 1) {
969 struct sk_buff *oldskb = card->tx_skb[port];
970 if (oldskb)
971 pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
972 oldskb->len, PCI_DMA_TODEVICE);
974 spin_lock(&card->tx_queue_lock);
975 skb = skb_dequeue(&card->tx_queue[port]);
976 if (!skb)
977 card->tx_mask &= ~(1 << port);
978 spin_unlock(&card->tx_queue_lock);
980 if (skb && !card->using_dma) {
981 memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
982 tx_started |= 1 << port;
983 oldskb = skb; /* We're done with this skb already */
984 } else if (skb && card->using_dma) {
985 SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
986 skb->len, PCI_DMA_TODEVICE);
987 iowrite32(SKB_CB(skb)->dma_addr,
988 card->config_regs + TX_DMA_ADDR(port));
991 if (!oldskb)
992 continue;
994 /* Clean up and free oldskb now it's gone */
995 if (atmdebug) {
996 struct pkt_hdr *header = (void *)oldskb->data;
997 int size = le16_to_cpu(header->size);
999 skb_pull(oldskb, sizeof(*header));
1000 dev_info(&card->dev->dev, "Transmitted: port %d\n",
1001 port);
1002 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1003 size, le16_to_cpu(header->vpi),
1004 le16_to_cpu(header->vci));
1005 print_buffer(oldskb);
1008 vcc = SKB_CB(oldskb)->vcc;
1010 if (vcc) {
1011 atomic_inc(&vcc->stats->tx);
1012 solos_pop(vcc, oldskb);
1013 } else
1014 dev_kfree_skb_irq(oldskb);
1018 /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1019 if (tx_started)
1020 iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1022 spin_unlock_irqrestore(&card->tx_lock, flags);
1023 return card_flags;
1026 static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1028 struct solos_card *card = vcc->dev->dev_data;
1029 struct pkt_hdr *header;
1030 int pktlen;
1032 pktlen = skb->len;
1033 if (pktlen > (BUF_SIZE - sizeof(*header))) {
1034 dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1035 solos_pop(vcc, skb);
1036 return 0;
1039 if (!skb_clone_writable(skb, sizeof(*header))) {
1040 int expand_by = 0;
1041 int ret;
1043 if (skb_headroom(skb) < sizeof(*header))
1044 expand_by = sizeof(*header) - skb_headroom(skb);
1046 ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1047 if (ret) {
1048 dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1049 solos_pop(vcc, skb);
1050 return ret;
1054 header = (void *)skb_push(skb, sizeof(*header));
1056 /* This does _not_ include the size of the header */
1057 header->size = cpu_to_le16(pktlen);
1058 header->vpi = cpu_to_le16(vcc->vpi);
1059 header->vci = cpu_to_le16(vcc->vci);
1060 header->type = cpu_to_le16(PKT_DATA);
1062 fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1064 return 0;
1067 static struct atmdev_ops fpga_ops = {
1068 .open = popen,
1069 .close = pclose,
1070 .ioctl = NULL,
1071 .getsockopt = NULL,
1072 .setsockopt = NULL,
1073 .send = psend,
1074 .send_oam = NULL,
1075 .phy_put = NULL,
1076 .phy_get = NULL,
1077 .change_qos = NULL,
1078 .proc_read = NULL,
1079 .owner = THIS_MODULE
1082 static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1084 int err;
1085 uint16_t fpga_ver;
1086 uint8_t major_ver, minor_ver;
1087 uint32_t data32;
1088 struct solos_card *card;
1090 card = kzalloc(sizeof(*card), GFP_KERNEL);
1091 if (!card)
1092 return -ENOMEM;
1094 card->dev = dev;
1095 init_waitqueue_head(&card->fw_wq);
1096 init_waitqueue_head(&card->param_wq);
1098 err = pci_enable_device(dev);
1099 if (err) {
1100 dev_warn(&dev->dev, "Failed to enable PCI device\n");
1101 goto out;
1104 err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
1105 if (err) {
1106 dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1107 goto out;
1110 err = pci_request_regions(dev, "solos");
1111 if (err) {
1112 dev_warn(&dev->dev, "Failed to request regions\n");
1113 goto out;
1116 card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1117 if (!card->config_regs) {
1118 dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1119 goto out_release_regions;
1121 card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1122 if (!card->buffers) {
1123 dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1124 goto out_unmap_config;
1127 if (reset) {
1128 iowrite32(1, card->config_regs + FPGA_MODE);
1129 data32 = ioread32(card->config_regs + FPGA_MODE);
1131 iowrite32(0, card->config_regs + FPGA_MODE);
1132 data32 = ioread32(card->config_regs + FPGA_MODE);
1135 data32 = ioread32(card->config_regs + FPGA_VER);
1136 fpga_ver = (data32 & 0x0000FFFF);
1137 major_ver = ((data32 & 0xFF000000) >> 24);
1138 minor_ver = ((data32 & 0x00FF0000) >> 16);
1139 card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1140 if (card->fpga_version > LEGACY_BUFFERS)
1141 card->buffer_size = BUF_SIZE;
1142 else
1143 card->buffer_size = OLD_BUF_SIZE;
1144 dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1145 major_ver, minor_ver, fpga_ver);
1147 if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1148 db_fpga_upgrade || db_firmware_upgrade)) {
1149 dev_warn(&dev->dev,
1150 "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1151 fpga_upgrade = firmware_upgrade = 0;
1152 db_fpga_upgrade = db_firmware_upgrade = 0;
1155 if (card->fpga_version >= DMA_SUPPORTED){
1156 card->using_dma = 1;
1157 } else {
1158 card->using_dma = 0;
1159 /* Set RX empty flag for all ports */
1160 iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1163 data32 = ioread32(card->config_regs + PORTS);
1164 card->nr_ports = (data32 & 0x000000FF);
1166 pci_set_drvdata(dev, card);
1168 tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1169 spin_lock_init(&card->tx_lock);
1170 spin_lock_init(&card->tx_queue_lock);
1171 spin_lock_init(&card->cli_queue_lock);
1172 spin_lock_init(&card->param_queue_lock);
1173 INIT_LIST_HEAD(&card->param_queue);
1175 err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1176 "solos-pci", card);
1177 if (err) {
1178 dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1179 goto out_unmap_both;
1182 iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1184 if (fpga_upgrade)
1185 flash_upgrade(card, 0);
1187 if (firmware_upgrade)
1188 flash_upgrade(card, 1);
1190 if (db_fpga_upgrade)
1191 flash_upgrade(card, 2);
1193 if (db_firmware_upgrade)
1194 flash_upgrade(card, 3);
1196 err = atm_init(card, &dev->dev);
1197 if (err)
1198 goto out_free_irq;
1200 return 0;
1202 out_free_irq:
1203 iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1204 free_irq(dev->irq, card);
1205 tasklet_kill(&card->tlet);
1207 out_unmap_both:
1208 pci_set_drvdata(dev, NULL);
1209 pci_iounmap(dev, card->buffers);
1210 out_unmap_config:
1211 pci_iounmap(dev, card->config_regs);
1212 out_release_regions:
1213 pci_release_regions(dev);
1214 out:
1215 kfree(card);
1216 return err;
1219 static int atm_init(struct solos_card *card, struct device *parent)
1221 int i;
1223 for (i = 0; i < card->nr_ports; i++) {
1224 struct sk_buff *skb;
1225 struct pkt_hdr *header;
1227 skb_queue_head_init(&card->tx_queue[i]);
1228 skb_queue_head_init(&card->cli_queue[i]);
1230 card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1231 if (!card->atmdev[i]) {
1232 dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1233 atm_remove(card);
1234 return -ENODEV;
1236 if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1237 dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1238 if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1239 dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1241 dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1243 card->atmdev[i]->ci_range.vpi_bits = 8;
1244 card->atmdev[i]->ci_range.vci_bits = 16;
1245 card->atmdev[i]->dev_data = card;
1246 card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1247 atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1249 skb = alloc_skb(sizeof(*header), GFP_ATOMIC);
1250 if (!skb) {
1251 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1252 continue;
1255 header = (void *)skb_put(skb, sizeof(*header));
1257 header->size = cpu_to_le16(0);
1258 header->vpi = cpu_to_le16(0);
1259 header->vci = cpu_to_le16(0);
1260 header->type = cpu_to_le16(PKT_STATUS);
1262 fpga_queue(card, i, skb, NULL);
1264 return 0;
1267 static void atm_remove(struct solos_card *card)
1269 int i;
1271 for (i = 0; i < card->nr_ports; i++) {
1272 if (card->atmdev[i]) {
1273 struct sk_buff *skb;
1275 dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1277 sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1278 atm_dev_deregister(card->atmdev[i]);
1280 skb = card->rx_skb[i];
1281 if (skb) {
1282 pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
1283 RX_DMA_SIZE, PCI_DMA_FROMDEVICE);
1284 dev_kfree_skb(skb);
1286 skb = card->tx_skb[i];
1287 if (skb) {
1288 pci_unmap_single(card->dev, SKB_CB(skb)->dma_addr,
1289 skb->len, PCI_DMA_TODEVICE);
1290 dev_kfree_skb(skb);
1292 while ((skb = skb_dequeue(&card->tx_queue[i])))
1293 dev_kfree_skb(skb);
1299 static void fpga_remove(struct pci_dev *dev)
1301 struct solos_card *card = pci_get_drvdata(dev);
1303 /* Disable IRQs */
1304 iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1306 /* Reset FPGA */
1307 iowrite32(1, card->config_regs + FPGA_MODE);
1308 (void)ioread32(card->config_regs + FPGA_MODE);
1310 atm_remove(card);
1312 free_irq(dev->irq, card);
1313 tasklet_kill(&card->tlet);
1315 /* Release device from reset */
1316 iowrite32(0, card->config_regs + FPGA_MODE);
1317 (void)ioread32(card->config_regs + FPGA_MODE);
1319 pci_iounmap(dev, card->buffers);
1320 pci_iounmap(dev, card->config_regs);
1322 pci_release_regions(dev);
1323 pci_disable_device(dev);
1325 pci_set_drvdata(dev, NULL);
1326 kfree(card);
1329 static struct pci_device_id fpga_pci_tbl[] __devinitdata = {
1330 { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1331 { 0, }
1334 MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1336 static struct pci_driver fpga_driver = {
1337 .name = "solos",
1338 .id_table = fpga_pci_tbl,
1339 .probe = fpga_probe,
1340 .remove = fpga_remove,
1344 static int __init solos_pci_init(void)
1346 printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1347 return pci_register_driver(&fpga_driver);
1350 static void __exit solos_pci_exit(void)
1352 pci_unregister_driver(&fpga_driver);
1353 printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1356 module_init(solos_pci_init);
1357 module_exit(solos_pci_exit);