drivers/clocksource/clksrc-dbx500-prcmu.c

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2011
   3  *
   4  * License Terms: GNU General Public License v2
   5  * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
   6  * Author: Sundar Iyer for ST-Ericsson
   7  * sched_clock implementation is based on:
   8  * plat-nomadik/timer.c Linus Walleij <linus.walleij@stericsson.com>
   9  *
  10  * DBx500-PRCMU Timer
  11  * The PRCMU has 5 timers which are available in a always-on
  12  * power domain.  We use the Timer 4 for our always-on clock
  13  * source on DB8500 and Timer 3 on DB5500.
  14  */
  15 #include <linux/clockchips.h>
  16 #include <linux/clksrc-dbx500-prcmu.h>
  17
  18 #include <asm/sched_clock.h>
  19
  20 #include <mach/setup.h>
  21 #include <mach/hardware.h>
  22
  23 #define RATE_32K                32768
  24
  25 #define TIMER_MODE_CONTINOUS    0x1
  26 #define TIMER_DOWNCOUNT_VAL     0xffffffff
  27
  28 #define PRCMU_TIMER_REF         0
  29 #define PRCMU_TIMER_DOWNCOUNT   0x4
  30 #define PRCMU_TIMER_MODE        0x8
  31
  32 #define SCHED_CLOCK_MIN_WRAP 131072 /* 2^32 / 32768 */
  33
  34 static void __iomem *clksrc_dbx500_timer_base;
  35
  36 static cycle_t clksrc_dbx500_prcmu_read(struct clocksource *cs)
  37 {
  38         u32 count, count2;
  39
  40         do {
  41                 count = readl(clksrc_dbx500_timer_base +
  42                               PRCMU_TIMER_DOWNCOUNT);
  43                 count2 = readl(clksrc_dbx500_timer_base +
  44                                PRCMU_TIMER_DOWNCOUNT);
  45         } while (count2 != count);
  46
  47         /* Negate because the timer is a decrementing counter */
  48         return ~count;
  49 }
  50
  51 static struct clocksource clocksource_dbx500_prcmu = {
  52         .name           = "dbx500-prcmu-timer",
  53         .rating         = 300,
  54         .read           = clksrc_dbx500_prcmu_read,
  55         .shift          = 10,
  56         .mask           = CLOCKSOURCE_MASK(32),
  57         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
  58 };
  59
  60 #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
  61
  62 static u32 notrace dbx500_prcmu_sched_clock_read(void)
  63 {
  64         if (unlikely(!clksrc_dbx500_timer_base))
  65                 return 0;
  66
  67         return clksrc_dbx500_prcmu_read(&clocksource_dbx500_prcmu);
  68 }
  69
  70 #endif
  71
  72 void __init clksrc_dbx500_prcmu_init(void __iomem *base)
  73 {
  74         clksrc_dbx500_timer_base = base;
  75
  76         /*
  77          * The A9 sub system expects the timer to be configured as
  78          * a continous looping timer.
  79          * The PRCMU should configure it but if it for some reason
  80          * don't we do it here.
  81          */
  82         if (readl(clksrc_dbx500_timer_base + PRCMU_TIMER_MODE) !=
  83             TIMER_MODE_CONTINOUS) {
  84                 writel(TIMER_MODE_CONTINOUS,
  85                        clksrc_dbx500_timer_base + PRCMU_TIMER_MODE);
  86                 writel(TIMER_DOWNCOUNT_VAL,
  87                        clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
  88         }
  89 #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
  90         setup_sched_clock(dbx500_prcmu_sched_clock_read,
  91                          32, RATE_32K);
  92 #endif
  93         clocksource_calc_mult_shift(&clocksource_dbx500_prcmu,
  94                                     RATE_32K, SCHED_CLOCK_MIN_WRAP);
  95         clocksource_register(&clocksource_dbx500_prcmu);
  96 }