i2c-eg20t: change timeout value 50msec to 1000msec

[zen-stable.git] / drivers / hwmon / adm1031.c

/*
  adm1031.c - Part of lm_sensors, Linux kernel modules for hardware
  monitoring
  Based on lm75.c and lm85.c
  Supports adm1030 / adm1031
  Copyright (C) 2004 Alexandre d'Alton <alex@alexdalton.org>
  Reworked by Jean Delvare <khali@linux-fr.org>

  This program is free software; you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program; if not, write to the Free Software
  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>

/* Following macros takes channel parameter starting from 0 to 2 */
#define ADM1031_REG_FAN_SPEED(nr)       (0x08 + (nr))
#define ADM1031_REG_FAN_DIV(nr)         (0x20 + (nr))
#define ADM1031_REG_PWM                 (0x22)
#define ADM1031_REG_FAN_MIN(nr)         (0x10 + (nr))
#define ADM1031_REG_FAN_FILTER          (0x23)

#define ADM1031_REG_TEMP_OFFSET(nr)     (0x0d + (nr))
#define ADM1031_REG_TEMP_MAX(nr)        (0x14 + 4 * (nr))
#define ADM1031_REG_TEMP_MIN(nr)        (0x15 + 4 * (nr))
#define ADM1031_REG_TEMP_CRIT(nr)       (0x16 + 4 * (nr))

#define ADM1031_REG_TEMP(nr)            (0x0a + (nr))
#define ADM1031_REG_AUTO_TEMP(nr)       (0x24 + (nr))

#define ADM1031_REG_STATUS(nr)          (0x2 + (nr))

#define ADM1031_REG_CONF1               0x00
#define ADM1031_REG_CONF2               0x01
#define ADM1031_REG_EXT_TEMP            0x06

#define ADM1031_CONF1_MONITOR_ENABLE    0x01    /* Monitoring enable */
#define ADM1031_CONF1_PWM_INVERT        0x08    /* PWM Invert */
#define ADM1031_CONF1_AUTO_MODE         0x80    /* Auto FAN */

#define ADM1031_CONF2_PWM1_ENABLE       0x01
#define ADM1031_CONF2_PWM2_ENABLE       0x02
#define ADM1031_CONF2_TACH1_ENABLE      0x04
#define ADM1031_CONF2_TACH2_ENABLE      0x08
#define ADM1031_CONF2_TEMP_ENABLE(chan) (0x10 << (chan))

#define ADM1031_UPDATE_RATE_MASK        0x1c
#define ADM1031_UPDATE_RATE_SHIFT       2

/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };

enum chips { adm1030, adm1031 };

typedef u8 auto_chan_table_t[8][2];

/* Each client has this additional data */
struct adm1031_data {
        struct device *hwmon_dev;
        struct mutex update_lock;
        int chip_type;
        char valid;             /* !=0 if following fields are valid */
        unsigned long last_updated;     /* In jiffies */
        unsigned int update_interval;   /* In milliseconds */
        /* The chan_select_table contains the possible configurations for
         * auto fan control.
         */
        const auto_chan_table_t *chan_select_table;
        u16 alarm;
        u8 conf1;
        u8 conf2;
        u8 fan[2];
        u8 fan_div[2];
        u8 fan_min[2];
        u8 pwm[2];
        u8 old_pwm[2];
        s8 temp[3];
        u8 ext_temp[3];
        u8 auto_temp[3];
        u8 auto_temp_min[3];
        u8 auto_temp_off[3];
        u8 auto_temp_max[3];
        s8 temp_offset[3];
        s8 temp_min[3];
        s8 temp_max[3];
        s8 temp_crit[3];
};

static int adm1031_probe(struct i2c_client *client,
                         const struct i2c_device_id *id);
static int adm1031_detect(struct i2c_client *client,
                          struct i2c_board_info *info);
static void adm1031_init_client(struct i2c_client *client);
static int adm1031_remove(struct i2c_client *client);
static struct adm1031_data *adm1031_update_device(struct device *dev);

static const struct i2c_device_id adm1031_id[] = {
        { "adm1030", adm1030 },
        { "adm1031", adm1031 },
        { }
};
MODULE_DEVICE_TABLE(i2c, adm1031_id);

/* This is the driver that will be inserted */
static struct i2c_driver adm1031_driver = {
        .class          = I2C_CLASS_HWMON,
        .driver = {
                .name = "adm1031",
        },
        .probe          = adm1031_probe,
        .remove         = adm1031_remove,
        .id_table       = adm1031_id,
        .detect         = adm1031_detect,
        .address_list   = normal_i2c,
};

static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg)
{
        return i2c_smbus_read_byte_data(client, reg);
}

static inline int
adm1031_write_value(struct i2c_client *client, u8 reg, unsigned int value)
{
        return i2c_smbus_write_byte_data(client, reg, value);
}


#define TEMP_TO_REG(val)                (((val) < 0 ? ((val - 500) / 1000) : \
                                        ((val + 500) / 1000)))

#define TEMP_FROM_REG(val)              ((val) * 1000)

#define TEMP_FROM_REG_EXT(val, ext)     (TEMP_FROM_REG(val) + (ext) * 125)

#define TEMP_OFFSET_TO_REG(val)         (TEMP_TO_REG(val) & 0x8f)
#define TEMP_OFFSET_FROM_REG(val)       TEMP_FROM_REG((val) < 0 ? \
                                                      (val) | 0x70 : (val))

#define FAN_FROM_REG(reg, div)          ((reg) ? \
                                         (11250 * 60) / ((reg) * (div)) : 0)

static int FAN_TO_REG(int reg, int div)
{
        int tmp;
        tmp = FAN_FROM_REG(SENSORS_LIMIT(reg, 0, 65535), div);
        return tmp > 255 ? 255 : tmp;
}

#define FAN_DIV_FROM_REG(reg)           (1<<(((reg)&0xc0)>>6))

#define PWM_TO_REG(val)                 (SENSORS_LIMIT((val), 0, 255) >> 4)
#define PWM_FROM_REG(val)               ((val) << 4)

#define FAN_CHAN_FROM_REG(reg)          (((reg) >> 5) & 7)
#define FAN_CHAN_TO_REG(val, reg)       \
        (((reg) & 0x1F) | (((val) << 5) & 0xe0))

#define AUTO_TEMP_MIN_TO_REG(val, reg)  \
        ((((val) / 500) & 0xf8) | ((reg) & 0x7))
#define AUTO_TEMP_RANGE_FROM_REG(reg)   (5000 * (1 << ((reg) & 0x7)))
#define AUTO_TEMP_MIN_FROM_REG(reg)     (1000 * ((((reg) >> 3) & 0x1f) << 2))

#define AUTO_TEMP_MIN_FROM_REG_DEG(reg) ((((reg) >> 3) & 0x1f) << 2)

#define AUTO_TEMP_OFF_FROM_REG(reg)             \
        (AUTO_TEMP_MIN_FROM_REG(reg) - 5000)

#define AUTO_TEMP_MAX_FROM_REG(reg)             \
        (AUTO_TEMP_RANGE_FROM_REG(reg) +        \
        AUTO_TEMP_MIN_FROM_REG(reg))

static int AUTO_TEMP_MAX_TO_REG(int val, int reg, int pwm)
{
        int ret;
        int range = val - AUTO_TEMP_MIN_FROM_REG(reg);

        range = ((val - AUTO_TEMP_MIN_FROM_REG(reg))*10)/(16 - pwm);
        ret = ((reg & 0xf8) |
               (range < 10000 ? 0 :
                range < 20000 ? 1 :
                range < 40000 ? 2 : range < 80000 ? 3 : 4));
        return ret;
}

/* FAN auto control */
#define GET_FAN_AUTO_BITFIELD(data, idx)        \
        (*(data)->chan_select_table)[FAN_CHAN_FROM_REG((data)->conf1)][idx % 2]

/* The tables below contains the possible values for the auto fan
 * control bitfields. the index in the table is the register value.
 * MSb is the auto fan control enable bit, so the four first entries
 * in the table disables auto fan control when both bitfields are zero.
 */
static const auto_chan_table_t auto_channel_select_table_adm1031 = {
        { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 },
        { 2 /* 0b010 */ , 4 /* 0b100 */ },
        { 2 /* 0b010 */ , 2 /* 0b010 */ },
        { 4 /* 0b100 */ , 4 /* 0b100 */ },
        { 7 /* 0b111 */ , 7 /* 0b111 */ },
};

static const auto_chan_table_t auto_channel_select_table_adm1030 = {
        { 0, 0 }, { 0, 0 }, { 0, 0 }, { 0, 0 },
        { 2 /* 0b10 */          , 0 },
        { 0xff /* invalid */    , 0 },
        { 0xff /* invalid */    , 0 },
        { 3 /* 0b11 */          , 0 },
};

/* That function checks if a bitfield is valid and returns the other bitfield
 * nearest match if no exact match where found.
 */
static int
get_fan_auto_nearest(struct adm1031_data *data,
                     int chan, u8 val, u8 reg, u8 *new_reg)
{
        int i;
        int first_match = -1, exact_match = -1;
        u8 other_reg_val =
            (*data->chan_select_table)[FAN_CHAN_FROM_REG(reg)][chan ? 0 : 1];

        if (val == 0) {
                *new_reg = 0;
                return 0;
        }

        for (i = 0; i < 8; i++) {
                if ((val == (*data->chan_select_table)[i][chan]) &&
                    ((*data->chan_select_table)[i][chan ? 0 : 1] ==
                     other_reg_val)) {
                        /* We found an exact match */
                        exact_match = i;
                        break;
                } else if (val == (*data->chan_select_table)[i][chan] &&
                           first_match == -1) {
                        /* Save the first match in case of an exact match has
                         * not been found
                         */
                        first_match = i;
                }
        }

        if (exact_match >= 0)
                *new_reg = exact_match;
        else if (first_match >= 0)
                *new_reg = first_match;
        else
                return -EINVAL;

        return 0;
}

static ssize_t show_fan_auto_channel(struct device *dev,
                                     struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", GET_FAN_AUTO_BITFIELD(data, nr));
}

static ssize_t
set_fan_auto_channel(struct device *dev, struct device_attribute *attr,
                     const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        u8 reg;
        int ret;
        u8 old_fan_mode;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        old_fan_mode = data->conf1;

        mutex_lock(&data->update_lock);

        ret = get_fan_auto_nearest(data, nr, val, data->conf1, &reg);
        if (ret) {
                mutex_unlock(&data->update_lock);
                return ret;
        }
        data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
        if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) ^
            (old_fan_mode & ADM1031_CONF1_AUTO_MODE)) {
                if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
                        /* Switch to Auto Fan Mode
                         * Save PWM registers
                         * Set PWM registers to 33% Both */
                        data->old_pwm[0] = data->pwm[0];
                        data->old_pwm[1] = data->pwm[1];
                        adm1031_write_value(client, ADM1031_REG_PWM, 0x55);
                } else {
                        /* Switch to Manual Mode */
                        data->pwm[0] = data->old_pwm[0];
                        data->pwm[1] = data->old_pwm[1];
                        /* Restore PWM registers */
                        adm1031_write_value(client, ADM1031_REG_PWM,
                                            data->pwm[0] | (data->pwm[1] << 4));
                }
        }
        data->conf1 = FAN_CHAN_TO_REG(reg, data->conf1);
        adm1031_write_value(client, ADM1031_REG_CONF1, data->conf1);
        mutex_unlock(&data->update_lock);
        return count;
}

static SENSOR_DEVICE_ATTR(auto_fan1_channel, S_IRUGO | S_IWUSR,
                show_fan_auto_channel, set_fan_auto_channel, 0);
static SENSOR_DEVICE_ATTR(auto_fan2_channel, S_IRUGO | S_IWUSR,
                show_fan_auto_channel, set_fan_auto_channel, 1);

/* Auto Temps */
static ssize_t show_auto_temp_off(struct device *dev,
                                  struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n",
                       AUTO_TEMP_OFF_FROM_REG(data->auto_temp[nr]));
}
static ssize_t show_auto_temp_min(struct device *dev,
                                  struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n",
                       AUTO_TEMP_MIN_FROM_REG(data->auto_temp[nr]));
}
static ssize_t
set_auto_temp_min(struct device *dev, struct device_attribute *attr,
                  const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        mutex_lock(&data->update_lock);
        data->auto_temp[nr] = AUTO_TEMP_MIN_TO_REG(val, data->auto_temp[nr]);
        adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
                            data->auto_temp[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t show_auto_temp_max(struct device *dev,
                                  struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n",
                       AUTO_TEMP_MAX_FROM_REG(data->auto_temp[nr]));
}
static ssize_t
set_auto_temp_max(struct device *dev, struct device_attribute *attr,
                  const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        mutex_lock(&data->update_lock);
        data->temp_max[nr] = AUTO_TEMP_MAX_TO_REG(val, data->auto_temp[nr],
                                                  data->pwm[nr]);
        adm1031_write_value(client, ADM1031_REG_AUTO_TEMP(nr),
                            data->temp_max[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}

#define auto_temp_reg(offset)                                           \
static SENSOR_DEVICE_ATTR(auto_temp##offset##_off, S_IRUGO,             \
                show_auto_temp_off, NULL, offset - 1);                  \
static SENSOR_DEVICE_ATTR(auto_temp##offset##_min, S_IRUGO | S_IWUSR,   \
                show_auto_temp_min, set_auto_temp_min, offset - 1);     \
static SENSOR_DEVICE_ATTR(auto_temp##offset##_max, S_IRUGO | S_IWUSR,   \
                show_auto_temp_max, set_auto_temp_max, offset - 1)

auto_temp_reg(1);
auto_temp_reg(2);
auto_temp_reg(3);

/* pwm */
static ssize_t show_pwm(struct device *dev,
                        struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
                       const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret, reg;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        mutex_lock(&data->update_lock);
        if ((data->conf1 & ADM1031_CONF1_AUTO_MODE) &&
            (((val>>4) & 0xf) != 5)) {
                /* In automatic mode, the only PWM accepted is 33% */
                mutex_unlock(&data->update_lock);
                return -EINVAL;
        }
        data->pwm[nr] = PWM_TO_REG(val);
        reg = adm1031_read_value(client, ADM1031_REG_PWM);
        adm1031_write_value(client, ADM1031_REG_PWM,
                            nr ? ((data->pwm[nr] << 4) & 0xf0) | (reg & 0xf)
                            : (data->pwm[nr] & 0xf) | (reg & 0xf0));
        mutex_unlock(&data->update_lock);
        return count;
}

static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 1);
static SENSOR_DEVICE_ATTR(auto_fan1_min_pwm, S_IRUGO | S_IWUSR,
                show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(auto_fan2_min_pwm, S_IRUGO | S_IWUSR,
                show_pwm, set_pwm, 1);

/* Fans */

/*
 * That function checks the cases where the fan reading is not
 * relevant.  It is used to provide 0 as fan reading when the fan is
 * not supposed to run
 */
static int trust_fan_readings(struct adm1031_data *data, int chan)
{
        int res = 0;

        if (data->conf1 & ADM1031_CONF1_AUTO_MODE) {
                switch (data->conf1 & 0x60) {
                case 0x00:
                        /*
                         * remote temp1 controls fan1,
                         * remote temp2 controls fan2
                         */
                        res = data->temp[chan+1] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[chan+1]);
                        break;
                case 0x20:      /* remote temp1 controls both fans */
                        res =
                            data->temp[1] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1]);
                        break;
                case 0x40:      /* remote temp2 controls both fans */
                        res =
                            data->temp[2] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]);
                        break;
                case 0x60:      /* max controls both fans */
                        res =
                            data->temp[0] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[0])
                            || data->temp[1] >=
                            AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[1])
                            || (data->chip_type == adm1031
                                && data->temp[2] >=
                                AUTO_TEMP_MIN_FROM_REG_DEG(data->auto_temp[2]));
                        break;
                }
        } else {
                res = data->pwm[chan] > 0;
        }
        return res;
}


static ssize_t show_fan(struct device *dev,
                        struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        int value;

        value = trust_fan_readings(data, nr) ? FAN_FROM_REG(data->fan[nr],
                                 FAN_DIV_FROM_REG(data->fan_div[nr])) : 0;
        return sprintf(buf, "%d\n", value);
}

static ssize_t show_fan_div(struct device *dev,
                            struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", FAN_DIV_FROM_REG(data->fan_div[nr]));
}
static ssize_t show_fan_min(struct device *dev,
                            struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n",
                       FAN_FROM_REG(data->fan_min[nr],
                                    FAN_DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
                           const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        mutex_lock(&data->update_lock);
        if (val) {
                data->fan_min[nr] =
                        FAN_TO_REG(val, FAN_DIV_FROM_REG(data->fan_div[nr]));
        } else {
                data->fan_min[nr] = 0xff;
        }
        adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr), data->fan_min[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
                           const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        u8 tmp;
        int old_div;
        int new_min;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        tmp = val == 8 ? 0xc0 :
              val == 4 ? 0x80 :
              val == 2 ? 0x40 :
              val == 1 ? 0x00 :
              0xff;
        if (tmp == 0xff)
                return -EINVAL;

        mutex_lock(&data->update_lock);
        /* Get fresh readings */
        data->fan_div[nr] = adm1031_read_value(client,
                                               ADM1031_REG_FAN_DIV(nr));
        data->fan_min[nr] = adm1031_read_value(client,
                                               ADM1031_REG_FAN_MIN(nr));

        /* Write the new clock divider and fan min */
        old_div = FAN_DIV_FROM_REG(data->fan_div[nr]);
        data->fan_div[nr] = tmp | (0x3f & data->fan_div[nr]);
        new_min = data->fan_min[nr] * old_div / val;
        data->fan_min[nr] = new_min > 0xff ? 0xff : new_min;

        adm1031_write_value(client, ADM1031_REG_FAN_DIV(nr),
                            data->fan_div[nr]);
        adm1031_write_value(client, ADM1031_REG_FAN_MIN(nr),
                            data->fan_min[nr]);

        /* Invalidate the cache: fan speed is no longer valid */
        data->valid = 0;
        mutex_unlock(&data->update_lock);
        return count;
}

#define fan_offset(offset)                                              \
static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO,                 \
                show_fan, NULL, offset - 1);                            \
static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,         \
                show_fan_min, set_fan_min, offset - 1);                 \
static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,         \
                show_fan_div, set_fan_div, offset - 1)

fan_offset(1);
fan_offset(2);


/* Temps */
static ssize_t show_temp(struct device *dev,
                         struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        int ext;
        ext = nr == 0 ?
            ((data->ext_temp[nr] >> 6) & 0x3) * 2 :
            (((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
        return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
}
static ssize_t show_temp_offset(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n",
                       TEMP_OFFSET_FROM_REG(data->temp_offset[nr]));
}
static ssize_t show_temp_min(struct device *dev,
                             struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
}
static ssize_t show_temp_max(struct device *dev,
                             struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
}
static ssize_t show_temp_crit(struct device *dev,
                              struct device_attribute *attr, char *buf)
{
        int nr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
}
static ssize_t set_temp_offset(struct device *dev,
                               struct device_attribute *attr, const char *buf,
                               size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        val = SENSORS_LIMIT(val, -15000, 15000);
        mutex_lock(&data->update_lock);
        data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val);
        adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr),
                            data->temp_offset[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
                            const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
        mutex_lock(&data->update_lock);
        data->temp_min[nr] = TEMP_TO_REG(val);
        adm1031_write_value(client, ADM1031_REG_TEMP_MIN(nr),
                            data->temp_min[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
                            const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
        mutex_lock(&data->update_lock);
        data->temp_max[nr] = TEMP_TO_REG(val);
        adm1031_write_value(client, ADM1031_REG_TEMP_MAX(nr),
                            data->temp_max[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}
static ssize_t set_temp_crit(struct device *dev, struct device_attribute *attr,
                             const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        int nr = to_sensor_dev_attr(attr)->index;
        long val;
        int ret;

        ret = kstrtol(buf, 10, &val);
        if (ret)
                return ret;

        val = SENSORS_LIMIT(val, -55000, nr == 0 ? 127750 : 127875);
        mutex_lock(&data->update_lock);
        data->temp_crit[nr] = TEMP_TO_REG(val);
        adm1031_write_value(client, ADM1031_REG_TEMP_CRIT(nr),
                            data->temp_crit[nr]);
        mutex_unlock(&data->update_lock);
        return count;
}

#define temp_reg(offset)                                                \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO,                \
                show_temp, NULL, offset - 1);                           \
static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR,     \
                show_temp_offset, set_temp_offset, offset - 1);         \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR,        \
                show_temp_min, set_temp_min, offset - 1);               \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR,        \
                show_temp_max, set_temp_max, offset - 1);               \
static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO | S_IWUSR,       \
                show_temp_crit, set_temp_crit, offset - 1)

temp_reg(1);
temp_reg(2);
temp_reg(3);

/* Alarms */
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
                           char *buf)
{
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", data->alarm);
}

static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);

static ssize_t show_alarm(struct device *dev,
                          struct device_attribute *attr, char *buf)
{
        int bitnr = to_sensor_dev_attr(attr)->index;
        struct adm1031_data *data = adm1031_update_device(dev);
        return sprintf(buf, "%d\n", (data->alarm >> bitnr) & 1);
}

static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 8);
static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_alarm, NULL, 9);
static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 10);
static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11);
static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);

/* Update Interval */
static const unsigned int update_intervals[] = {
        16000, 8000, 4000, 2000, 1000, 500, 250, 125,
};

static ssize_t show_update_interval(struct device *dev,
                                    struct device_attribute *attr, char *buf)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);

        return sprintf(buf, "%u\n", data->update_interval);
}

static ssize_t set_update_interval(struct device *dev,
                                   struct device_attribute *attr,
                                   const char *buf, size_t count)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        unsigned long val;
        int i, err;
        u8 reg;

        err = kstrtoul(buf, 10, &val);
        if (err)
                return err;

        /*
         * Find the nearest update interval from the table.
         * Use it to determine the matching update rate.
         */
        for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) {
                if (val >= update_intervals[i])
                        break;
        }
        /* if not found, we point to the last entry (lowest update interval) */

        /* set the new update rate while preserving other settings */
        reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
        reg &= ~ADM1031_UPDATE_RATE_MASK;
        reg |= i << ADM1031_UPDATE_RATE_SHIFT;
        adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);

        mutex_lock(&data->update_lock);
        data->update_interval = update_intervals[i];
        mutex_unlock(&data->update_lock);

        return count;
}

static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
                   set_update_interval);

static struct attribute *adm1031_attributes[] = {
        &sensor_dev_attr_fan1_input.dev_attr.attr,
        &sensor_dev_attr_fan1_div.dev_attr.attr,
        &sensor_dev_attr_fan1_min.dev_attr.attr,
        &sensor_dev_attr_fan1_alarm.dev_attr.attr,
        &sensor_dev_attr_fan1_fault.dev_attr.attr,
        &sensor_dev_attr_pwm1.dev_attr.attr,
        &sensor_dev_attr_auto_fan1_channel.dev_attr.attr,
        &sensor_dev_attr_temp1_input.dev_attr.attr,
        &sensor_dev_attr_temp1_offset.dev_attr.attr,
        &sensor_dev_attr_temp1_min.dev_attr.attr,
        &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
        &sensor_dev_attr_temp1_max.dev_attr.attr,
        &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
        &sensor_dev_attr_temp1_crit.dev_attr.attr,
        &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
        &sensor_dev_attr_temp2_input.dev_attr.attr,
        &sensor_dev_attr_temp2_offset.dev_attr.attr,
        &sensor_dev_attr_temp2_min.dev_attr.attr,
        &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
        &sensor_dev_attr_temp2_max.dev_attr.attr,
        &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
        &sensor_dev_attr_temp2_crit.dev_attr.attr,
        &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
        &sensor_dev_attr_temp2_fault.dev_attr.attr,

        &sensor_dev_attr_auto_temp1_off.dev_attr.attr,
        &sensor_dev_attr_auto_temp1_min.dev_attr.attr,
        &sensor_dev_attr_auto_temp1_max.dev_attr.attr,

        &sensor_dev_attr_auto_temp2_off.dev_attr.attr,
        &sensor_dev_attr_auto_temp2_min.dev_attr.attr,
        &sensor_dev_attr_auto_temp2_max.dev_attr.attr,

        &sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,

        &dev_attr_update_interval.attr,
        &dev_attr_alarms.attr,

        NULL
};

static const struct attribute_group adm1031_group = {
        .attrs = adm1031_attributes,
};

static struct attribute *adm1031_attributes_opt[] = {
        &sensor_dev_attr_fan2_input.dev_attr.attr,
        &sensor_dev_attr_fan2_div.dev_attr.attr,
        &sensor_dev_attr_fan2_min.dev_attr.attr,
        &sensor_dev_attr_fan2_alarm.dev_attr.attr,
        &sensor_dev_attr_fan2_fault.dev_attr.attr,
        &sensor_dev_attr_pwm2.dev_attr.attr,
        &sensor_dev_attr_auto_fan2_channel.dev_attr.attr,
        &sensor_dev_attr_temp3_input.dev_attr.attr,
        &sensor_dev_attr_temp3_offset.dev_attr.attr,
        &sensor_dev_attr_temp3_min.dev_attr.attr,
        &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
        &sensor_dev_attr_temp3_max.dev_attr.attr,
        &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
        &sensor_dev_attr_temp3_crit.dev_attr.attr,
        &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
        &sensor_dev_attr_temp3_fault.dev_attr.attr,
        &sensor_dev_attr_auto_temp3_off.dev_attr.attr,
        &sensor_dev_attr_auto_temp3_min.dev_attr.attr,
        &sensor_dev_attr_auto_temp3_max.dev_attr.attr,
        &sensor_dev_attr_auto_fan2_min_pwm.dev_attr.attr,
        NULL
};

static const struct attribute_group adm1031_group_opt = {
        .attrs = adm1031_attributes_opt,
};

/* Return 0 if detection is successful, -ENODEV otherwise */
static int adm1031_detect(struct i2c_client *client,
                          struct i2c_board_info *info)
{
        struct i2c_adapter *adapter = client->adapter;
        const char *name;
        int id, co;

        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -ENODEV;

        id = i2c_smbus_read_byte_data(client, 0x3d);
        co = i2c_smbus_read_byte_data(client, 0x3e);

        if (!((id == 0x31 || id == 0x30) && co == 0x41))
                return -ENODEV;
        name = (id == 0x30) ? "adm1030" : "adm1031";

        strlcpy(info->type, name, I2C_NAME_SIZE);

        return 0;
}

static int adm1031_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
{
        struct adm1031_data *data;
        int err;

        data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL);
        if (!data) {
                err = -ENOMEM;
                goto exit;
        }

        i2c_set_clientdata(client, data);
        data->chip_type = id->driver_data;
        mutex_init(&data->update_lock);

        if (data->chip_type == adm1030)
                data->chan_select_table = &auto_channel_select_table_adm1030;
        else
                data->chan_select_table = &auto_channel_select_table_adm1031;

        /* Initialize the ADM1031 chip */
        adm1031_init_client(client);

        /* Register sysfs hooks */
        err = sysfs_create_group(&client->dev.kobj, &adm1031_group);
        if (err)
                goto exit_free;

        if (data->chip_type == adm1031) {
                err = sysfs_create_group(&client->dev.kobj, &adm1031_group_opt);
                if (err)
                        goto exit_remove;
        }

        data->hwmon_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove;
        }

        return 0;

exit_remove:
        sysfs_remove_group(&client->dev.kobj, &adm1031_group);
        sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
exit_free:
        kfree(data);
exit:
        return err;
}

static int adm1031_remove(struct i2c_client *client)
{
        struct adm1031_data *data = i2c_get_clientdata(client);

        hwmon_device_unregister(data->hwmon_dev);
        sysfs_remove_group(&client->dev.kobj, &adm1031_group);
        sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt);
        kfree(data);
        return 0;
}

static void adm1031_init_client(struct i2c_client *client)
{
        unsigned int read_val;
        unsigned int mask;
        int i;
        struct adm1031_data *data = i2c_get_clientdata(client);

        mask = (ADM1031_CONF2_PWM1_ENABLE | ADM1031_CONF2_TACH1_ENABLE);
        if (data->chip_type == adm1031) {
                mask |= (ADM1031_CONF2_PWM2_ENABLE |
                        ADM1031_CONF2_TACH2_ENABLE);
        }
        /* Initialize the ADM1031 chip (enables fan speed reading ) */
        read_val = adm1031_read_value(client, ADM1031_REG_CONF2);
        if ((read_val | mask) != read_val)
                adm1031_write_value(client, ADM1031_REG_CONF2, read_val | mask);

        read_val = adm1031_read_value(client, ADM1031_REG_CONF1);
        if ((read_val | ADM1031_CONF1_MONITOR_ENABLE) != read_val) {
                adm1031_write_value(client, ADM1031_REG_CONF1,
                                    read_val | ADM1031_CONF1_MONITOR_ENABLE);
        }

        /* Read the chip's update rate */
        mask = ADM1031_UPDATE_RATE_MASK;
        read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
        i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
        /* Save it as update interval */
        data->update_interval = update_intervals[i];
}

static struct adm1031_data *adm1031_update_device(struct device *dev)
{
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1031_data *data = i2c_get_clientdata(client);
        unsigned long next_update;
        int chan;

        mutex_lock(&data->update_lock);

        next_update = data->last_updated
          + msecs_to_jiffies(data->update_interval);
        if (time_after(jiffies, next_update) || !data->valid) {

                dev_dbg(&client->dev, "Starting adm1031 update\n");
                for (chan = 0;
                     chan < ((data->chip_type == adm1031) ? 3 : 2); chan++) {
                        u8 oldh, newh;

                        oldh =
                            adm1031_read_value(client, ADM1031_REG_TEMP(chan));
                        data->ext_temp[chan] =
                            adm1031_read_value(client, ADM1031_REG_EXT_TEMP);
                        newh =
                            adm1031_read_value(client, ADM1031_REG_TEMP(chan));
                        if (newh != oldh) {
                                data->ext_temp[chan] =
                                    adm1031_read_value(client,
                                                       ADM1031_REG_EXT_TEMP);
#ifdef DEBUG
                                oldh =
                                    adm1031_read_value(client,
                                                       ADM1031_REG_TEMP(chan));

                                /* oldh is actually newer */
                                if (newh != oldh)
                                        dev_warn(&client->dev,
                                          "Remote temperature may be wrong.\n");
#endif
                        }
                        data->temp[chan] = newh;

                        data->temp_offset[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_TEMP_OFFSET(chan));
                        data->temp_min[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_TEMP_MIN(chan));
                        data->temp_max[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_TEMP_MAX(chan));
                        data->temp_crit[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_TEMP_CRIT(chan));
                        data->auto_temp[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_AUTO_TEMP(chan));

                }

                data->conf1 = adm1031_read_value(client, ADM1031_REG_CONF1);
                data->conf2 = adm1031_read_value(client, ADM1031_REG_CONF2);

                data->alarm = adm1031_read_value(client, ADM1031_REG_STATUS(0))
                    | (adm1031_read_value(client, ADM1031_REG_STATUS(1)) << 8);
                if (data->chip_type == adm1030)
                        data->alarm &= 0xc0ff;

                for (chan = 0; chan < (data->chip_type == adm1030 ? 1 : 2);
                     chan++) {
                        data->fan_div[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_FAN_DIV(chan));
                        data->fan_min[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_FAN_MIN(chan));
                        data->fan[chan] =
                            adm1031_read_value(client,
                                               ADM1031_REG_FAN_SPEED(chan));
                        data->pwm[chan] =
                          (adm1031_read_value(client,
                                        ADM1031_REG_PWM) >> (4 * chan)) & 0x0f;
                }
                data->last_updated = jiffies;
                data->valid = 1;
        }

        mutex_unlock(&data->update_lock);

        return data;
}

static int __init sensors_adm1031_init(void)
{
        return i2c_add_driver(&adm1031_driver);
}

static void __exit sensors_adm1031_exit(void)
{
        i2c_del_driver(&adm1031_driver);
}

MODULE_AUTHOR("Alexandre d'Alton <alex@alexdalton.org>");
MODULE_DESCRIPTION("ADM1031/ADM1030 driver");
MODULE_LICENSE("GPL");

module_init(sensors_adm1031_init);
module_exit(sensors_adm1031_exit);