i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / input / misc / twl6040-vibra.c
blob45874fed523ab771e94f8b3d9dccf415b8cfa6af
1 /*
2 * twl6040-vibra.c - TWL6040 Vibrator driver
4 * Author: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
5 * Author: Misael Lopez Cruz <misael.lopez@ti.com>
7 * Copyright: (C) 2011 Texas Instruments, Inc.
9 * Based on twl4030-vibra.c by Henrik Saari <henrik.saari@nokia.com>
10 * Felipe Balbi <felipe.balbi@nokia.com>
11 * Jari Vanhala <ext-javi.vanhala@nokia.com>
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
17 * This program is distributed in the hope that it will be useful, but
18 * WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 * General Public License for more details.
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
25 * 02110-1301 USA
28 #include <linux/module.h>
29 #include <linux/platform_device.h>
30 #include <linux/workqueue.h>
31 #include <linux/i2c/twl.h>
32 #include <linux/mfd/twl6040.h>
33 #include <linux/slab.h>
34 #include <linux/delay.h>
35 #include <linux/regulator/consumer.h>
37 #define EFFECT_DIR_180_DEG 0x8000
39 /* Recommended modulation index 85% */
40 #define TWL6040_VIBRA_MOD 85
42 #define TWL6040_NUM_SUPPLIES 2
44 struct vibra_info {
45 struct device *dev;
46 struct input_dev *input_dev;
47 struct workqueue_struct *workqueue;
48 struct work_struct play_work;
49 struct mutex mutex;
50 int irq;
52 bool enabled;
53 int weak_speed;
54 int strong_speed;
55 int direction;
57 unsigned int vibldrv_res;
58 unsigned int vibrdrv_res;
59 unsigned int viblmotor_res;
60 unsigned int vibrmotor_res;
62 struct regulator_bulk_data supplies[TWL6040_NUM_SUPPLIES];
64 struct twl6040 *twl6040;
67 static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
69 struct vibra_info *info = data;
70 struct twl6040 *twl6040 = info->twl6040;
71 u8 status;
73 status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
74 if (status & TWL6040_VIBLOCDET) {
75 dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
76 twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
77 TWL6040_VIBENA);
79 if (status & TWL6040_VIBROCDET) {
80 dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
81 twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
82 TWL6040_VIBENA);
85 return IRQ_HANDLED;
88 static void twl6040_vibra_enable(struct vibra_info *info)
90 struct twl6040 *twl6040 = info->twl6040;
91 int ret;
93 ret = regulator_bulk_enable(ARRAY_SIZE(info->supplies), info->supplies);
94 if (ret) {
95 dev_err(info->dev, "failed to enable regulators %d\n", ret);
96 return;
99 twl6040_power(info->twl6040, 1);
100 if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
102 * ERRATA: Disable overcurrent protection for at least
103 * 3ms when enabling vibrator drivers to avoid false
104 * overcurrent detection
106 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
107 TWL6040_VIBENA | TWL6040_VIBCTRL);
108 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
109 TWL6040_VIBENA | TWL6040_VIBCTRL);
110 usleep_range(3000, 3500);
113 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
114 TWL6040_VIBENA);
115 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
116 TWL6040_VIBENA);
118 info->enabled = true;
121 static void twl6040_vibra_disable(struct vibra_info *info)
123 struct twl6040 *twl6040 = info->twl6040;
125 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL, 0x00);
126 twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR, 0x00);
127 twl6040_power(info->twl6040, 0);
129 regulator_bulk_disable(ARRAY_SIZE(info->supplies), info->supplies);
131 info->enabled = false;
134 static u8 twl6040_vibra_code(int vddvib, int vibdrv_res, int motor_res,
135 int speed, int direction)
137 int vpk, max_code;
138 u8 vibdat;
140 /* output swing */
141 vpk = (vddvib * motor_res * TWL6040_VIBRA_MOD) /
142 (100 * (vibdrv_res + motor_res));
144 /* 50mV per VIBDAT code step */
145 max_code = vpk / 50;
146 if (max_code > TWL6040_VIBDAT_MAX)
147 max_code = TWL6040_VIBDAT_MAX;
149 /* scale speed to max allowed code */
150 vibdat = (u8)((speed * max_code) / USHRT_MAX);
152 /* 2's complement for direction > 180 degrees */
153 vibdat *= direction;
155 return vibdat;
158 static void twl6040_vibra_set_effect(struct vibra_info *info)
160 struct twl6040 *twl6040 = info->twl6040;
161 u8 vibdatl, vibdatr;
162 int volt;
164 /* weak motor */
165 volt = regulator_get_voltage(info->supplies[0].consumer) / 1000;
166 vibdatl = twl6040_vibra_code(volt, info->vibldrv_res,
167 info->viblmotor_res,
168 info->weak_speed, info->direction);
170 /* strong motor */
171 volt = regulator_get_voltage(info->supplies[1].consumer) / 1000;
172 vibdatr = twl6040_vibra_code(volt, info->vibrdrv_res,
173 info->vibrmotor_res,
174 info->strong_speed, info->direction);
176 twl6040_reg_write(twl6040, TWL6040_REG_VIBDATL, vibdatl);
177 twl6040_reg_write(twl6040, TWL6040_REG_VIBDATR, vibdatr);
180 static void vibra_play_work(struct work_struct *work)
182 struct vibra_info *info = container_of(work,
183 struct vibra_info, play_work);
185 mutex_lock(&info->mutex);
187 if (info->weak_speed || info->strong_speed) {
188 if (!info->enabled)
189 twl6040_vibra_enable(info);
191 twl6040_vibra_set_effect(info);
192 } else if (info->enabled)
193 twl6040_vibra_disable(info);
195 mutex_unlock(&info->mutex);
198 static int vibra_play(struct input_dev *input, void *data,
199 struct ff_effect *effect)
201 struct vibra_info *info = input_get_drvdata(input);
202 int ret;
204 /* Do not allow effect, while the routing is set to use audio */
205 ret = twl6040_get_vibralr_status(info->twl6040);
206 if (ret & TWL6040_VIBSEL) {
207 dev_info(&input->dev, "Vibra is configured for audio\n");
208 return -EBUSY;
211 info->weak_speed = effect->u.rumble.weak_magnitude;
212 info->strong_speed = effect->u.rumble.strong_magnitude;
213 info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
215 ret = queue_work(info->workqueue, &info->play_work);
216 if (!ret) {
217 dev_info(&input->dev, "work is already on queue\n");
218 return ret;
221 return 0;
224 static void twl6040_vibra_close(struct input_dev *input)
226 struct vibra_info *info = input_get_drvdata(input);
228 cancel_work_sync(&info->play_work);
230 mutex_lock(&info->mutex);
232 if (info->enabled)
233 twl6040_vibra_disable(info);
235 mutex_unlock(&info->mutex);
238 #ifdef CONFIG_PM_SLEEP
239 static int twl6040_vibra_suspend(struct device *dev)
241 struct platform_device *pdev = to_platform_device(dev);
242 struct vibra_info *info = platform_get_drvdata(pdev);
244 mutex_lock(&info->mutex);
246 if (info->enabled)
247 twl6040_vibra_disable(info);
249 mutex_unlock(&info->mutex);
251 return 0;
254 #endif
256 static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
258 static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
260 struct twl4030_vibra_data *pdata = pdev->dev.platform_data;
261 struct vibra_info *info;
262 int ret;
264 if (!pdata) {
265 dev_err(&pdev->dev, "platform_data not available\n");
266 return -EINVAL;
269 info = kzalloc(sizeof(*info), GFP_KERNEL);
270 if (!info) {
271 dev_err(&pdev->dev, "couldn't allocate memory\n");
272 return -ENOMEM;
275 info->dev = &pdev->dev;
276 info->twl6040 = dev_get_drvdata(pdev->dev.parent);
277 info->vibldrv_res = pdata->vibldrv_res;
278 info->vibrdrv_res = pdata->vibrdrv_res;
279 info->viblmotor_res = pdata->viblmotor_res;
280 info->vibrmotor_res = pdata->vibrmotor_res;
281 if ((!info->vibldrv_res && !info->viblmotor_res) ||
282 (!info->vibrdrv_res && !info->vibrmotor_res)) {
283 dev_err(info->dev, "invalid vibra driver/motor resistance\n");
284 ret = -EINVAL;
285 goto err_kzalloc;
288 info->irq = platform_get_irq(pdev, 0);
289 if (info->irq < 0) {
290 dev_err(info->dev, "invalid irq\n");
291 ret = -EINVAL;
292 goto err_kzalloc;
295 mutex_init(&info->mutex);
297 info->input_dev = input_allocate_device();
298 if (info->input_dev == NULL) {
299 dev_err(info->dev, "couldn't allocate input device\n");
300 ret = -ENOMEM;
301 goto err_kzalloc;
304 input_set_drvdata(info->input_dev, info);
306 info->input_dev->name = "twl6040:vibrator";
307 info->input_dev->id.version = 1;
308 info->input_dev->dev.parent = pdev->dev.parent;
309 info->input_dev->close = twl6040_vibra_close;
310 __set_bit(FF_RUMBLE, info->input_dev->ffbit);
312 ret = input_ff_create_memless(info->input_dev, NULL, vibra_play);
313 if (ret < 0) {
314 dev_err(info->dev, "couldn't register vibrator to FF\n");
315 goto err_ialloc;
318 ret = input_register_device(info->input_dev);
319 if (ret < 0) {
320 dev_err(info->dev, "couldn't register input device\n");
321 goto err_iff;
324 platform_set_drvdata(pdev, info);
326 ret = request_threaded_irq(info->irq, NULL, twl6040_vib_irq_handler, 0,
327 "twl6040_irq_vib", info);
328 if (ret) {
329 dev_err(info->dev, "VIB IRQ request failed: %d\n", ret);
330 goto err_irq;
333 info->supplies[0].supply = "vddvibl";
334 info->supplies[1].supply = "vddvibr";
335 ret = regulator_bulk_get(info->dev, ARRAY_SIZE(info->supplies),
336 info->supplies);
337 if (ret) {
338 dev_err(info->dev, "couldn't get regulators %d\n", ret);
339 goto err_regulator;
342 if (pdata->vddvibl_uV) {
343 ret = regulator_set_voltage(info->supplies[0].consumer,
344 pdata->vddvibl_uV,
345 pdata->vddvibl_uV);
346 if (ret) {
347 dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
348 ret);
349 goto err_voltage;
353 if (pdata->vddvibr_uV) {
354 ret = regulator_set_voltage(info->supplies[1].consumer,
355 pdata->vddvibr_uV,
356 pdata->vddvibr_uV);
357 if (ret) {
358 dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
359 ret);
360 goto err_voltage;
364 info->workqueue = alloc_workqueue("twl6040-vibra", 0, 0);
365 if (info->workqueue == NULL) {
366 dev_err(info->dev, "couldn't create workqueue\n");
367 ret = -ENOMEM;
368 goto err_voltage;
370 INIT_WORK(&info->play_work, vibra_play_work);
372 return 0;
374 err_voltage:
375 regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
376 err_regulator:
377 free_irq(info->irq, info);
378 err_irq:
379 input_unregister_device(info->input_dev);
380 info->input_dev = NULL;
381 err_iff:
382 if (info->input_dev)
383 input_ff_destroy(info->input_dev);
384 err_ialloc:
385 input_free_device(info->input_dev);
386 err_kzalloc:
387 kfree(info);
388 return ret;
391 static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
393 struct vibra_info *info = platform_get_drvdata(pdev);
395 input_unregister_device(info->input_dev);
396 free_irq(info->irq, info);
397 regulator_bulk_free(ARRAY_SIZE(info->supplies), info->supplies);
398 destroy_workqueue(info->workqueue);
399 kfree(info);
401 return 0;
404 static struct platform_driver twl6040_vibra_driver = {
405 .probe = twl6040_vibra_probe,
406 .remove = __devexit_p(twl6040_vibra_remove),
407 .driver = {
408 .name = "twl6040-vibra",
409 .owner = THIS_MODULE,
410 .pm = &twl6040_vibra_pm_ops,
413 module_platform_driver(twl6040_vibra_driver);
415 MODULE_ALIAS("platform:twl6040-vibra");
416 MODULE_DESCRIPTION("TWL6040 Vibra driver");
417 MODULE_LICENSE("GPL");
418 MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>");
419 MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>");