i2c-eg20t: change timeout value 50msec to 1000msec

[zen-stable.git] / drivers / scsi / aic7xxx / aic79xx_pci.c

/*
 * Product specific probe and attach routines for:
 *      aic7901 and aic7902 SCSI controllers
 *
 * Copyright (c) 1994-2001 Justin T. Gibbs.
 * Copyright (c) 2000-2002 Adaptec Inc.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 *
 * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $
 */

#ifdef __linux__
#include "aic79xx_osm.h"
#include "aic79xx_inline.h"
#else
#include <dev/aic7xxx/aic79xx_osm.h>
#include <dev/aic7xxx/aic79xx_inline.h>
#endif

#include "aic79xx_pci.h"

static inline uint64_t
ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
{
        uint64_t id;

        id = subvendor
           | (subdevice << 16)
           | ((uint64_t)vendor << 32)
           | ((uint64_t)device << 48);

        return (id);
}

#define ID_AIC7902_PCI_REV_A4           0x3
#define ID_AIC7902_PCI_REV_B0           0x10
#define SUBID_HP                        0x0E11

#define DEVID_9005_HOSTRAID(id) ((id) & 0x80)

#define DEVID_9005_TYPE(id) ((id) & 0xF)
#define         DEVID_9005_TYPE_HBA             0x0     /* Standard Card */
#define         DEVID_9005_TYPE_HBA_2EXT        0x1     /* 2 External Ports */
#define         DEVID_9005_TYPE_IROC            0x8     /* Raid(0,1,10) Card */
#define         DEVID_9005_TYPE_MB              0xF     /* On Motherboard */

#define DEVID_9005_MFUNC(id) ((id) & 0x10)

#define DEVID_9005_PACKETIZED(id) ((id) & 0x8000)

#define SUBID_9005_TYPE(id) ((id) & 0xF)
#define         SUBID_9005_TYPE_HBA             0x0     /* Standard Card */
#define         SUBID_9005_TYPE_MB              0xF     /* On Motherboard */

#define SUBID_9005_AUTOTERM(id) (((id) & 0x10) == 0)

#define SUBID_9005_LEGACYCONN_FUNC(id) ((id) & 0x20)

#define SUBID_9005_SEEPTYPE(id) (((id) & 0x0C0) >> 6)
#define         SUBID_9005_SEEPTYPE_NONE        0x0
#define         SUBID_9005_SEEPTYPE_4K          0x1

static ahd_device_setup_t ahd_aic7901_setup;
static ahd_device_setup_t ahd_aic7901A_setup;
static ahd_device_setup_t ahd_aic7902_setup;
static ahd_device_setup_t ahd_aic790X_setup;

static const struct ahd_pci_identity ahd_pci_ident_table[] =
{
        /* aic7901 based controllers */
        {
                ID_AHA_29320A,
                ID_ALL_MASK,
                "Adaptec 29320A Ultra320 SCSI adapter",
                ahd_aic7901_setup
        },
        {
                ID_AHA_29320ALP,
                ID_ALL_MASK,
                "Adaptec 29320ALP PCIx Ultra320 SCSI adapter",
                ahd_aic7901_setup
        },
        {
                ID_AHA_29320LPE,
                ID_ALL_MASK,
                "Adaptec 29320LPE PCIe Ultra320 SCSI adapter",
                ahd_aic7901_setup
        },
        /* aic7901A based controllers */
        {
                ID_AHA_29320LP,
                ID_ALL_MASK,
                "Adaptec 29320LP Ultra320 SCSI adapter",
                ahd_aic7901A_setup
        },
        /* aic7902 based controllers */ 
        {
                ID_AHA_29320,
                ID_ALL_MASK,
                "Adaptec 29320 Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_29320B,
                ID_ALL_MASK,
                "Adaptec 29320B Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320,
                ID_ALL_MASK,
                "Adaptec 39320 Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320_B,
                ID_ALL_MASK,
                "Adaptec 39320 Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320_B_DELL,
                ID_ALL_MASK,
                "Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320A,
                ID_ALL_MASK,
                "Adaptec 39320A Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320D,
                ID_ALL_MASK,
                "Adaptec 39320D Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320D_HP,
                ID_ALL_MASK,
                "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320D_B,
                ID_ALL_MASK,
                "Adaptec 39320D Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        {
                ID_AHA_39320D_B_HP,
                ID_ALL_MASK,
                "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
                ahd_aic7902_setup
        },
        /* Generic chip probes for devices we don't know 'exactly' */
        {
                ID_AIC7901 & ID_9005_GENERIC_MASK,
                ID_9005_GENERIC_MASK,
                "Adaptec AIC7901 Ultra320 SCSI adapter",
                ahd_aic7901_setup
        },
        {
                ID_AIC7901A & ID_DEV_VENDOR_MASK,
                ID_DEV_VENDOR_MASK,
                "Adaptec AIC7901A Ultra320 SCSI adapter",
                ahd_aic7901A_setup
        },
        {
                ID_AIC7902 & ID_9005_GENERIC_MASK,
                ID_9005_GENERIC_MASK,
                "Adaptec AIC7902 Ultra320 SCSI adapter",
                ahd_aic7902_setup
        }
};

static const u_int ahd_num_pci_devs = ARRAY_SIZE(ahd_pci_ident_table);
                
#define DEVCONFIG               0x40
#define         PCIXINITPAT     0x0000E000ul
#define                 PCIXINIT_PCI33_66       0x0000E000ul
#define                 PCIXINIT_PCIX50_66      0x0000C000ul
#define                 PCIXINIT_PCIX66_100     0x0000A000ul
#define                 PCIXINIT_PCIX100_133    0x00008000ul
#define PCI_BUS_MODES_INDEX(devconfig)  \
        (((devconfig) & PCIXINITPAT) >> 13)
static const char *pci_bus_modes[] =
{
        "PCI bus mode unknown",
        "PCI bus mode unknown",
        "PCI bus mode unknown",
        "PCI bus mode unknown",
        "PCI-X 101-133MHz",
        "PCI-X 67-100MHz",
        "PCI-X 50-66MHz",
        "PCI 33 or 66MHz"
};

#define         TESTMODE        0x00000800ul
#define         IRDY_RST        0x00000200ul
#define         FRAME_RST       0x00000100ul
#define         PCI64BIT        0x00000080ul
#define         MRDCEN          0x00000040ul
#define         ENDIANSEL       0x00000020ul
#define         MIXQWENDIANEN   0x00000008ul
#define         DACEN           0x00000004ul
#define         STPWLEVEL       0x00000002ul
#define         QWENDIANSEL     0x00000001ul

#define DEVCONFIG1              0x44
#define         PREQDIS         0x01

#define CSIZE_LATTIME           0x0c
#define         CACHESIZE       0x000000fful
#define         LATTIME         0x0000ff00ul

static int      ahd_check_extport(struct ahd_softc *ahd);
static void     ahd_configure_termination(struct ahd_softc *ahd,
                                          u_int adapter_control);
static void     ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat);
static void     ahd_pci_intr(struct ahd_softc *ahd);

const struct ahd_pci_identity *
ahd_find_pci_device(ahd_dev_softc_t pci)
{
        uint64_t  full_id;
        uint16_t  device;
        uint16_t  vendor;
        uint16_t  subdevice;
        uint16_t  subvendor;
        const struct ahd_pci_identity *entry;
        u_int     i;

        vendor = ahd_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
        device = ahd_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
        subvendor = ahd_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
        subdevice = ahd_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
        full_id = ahd_compose_id(device,
                                 vendor,
                                 subdevice,
                                 subvendor);

        /*
         * Controllers, mask out the IROC/HostRAID bit
         */
        
        full_id &= ID_ALL_IROC_MASK;

        for (i = 0; i < ahd_num_pci_devs; i++) {
                entry = &ahd_pci_ident_table[i];
                if (entry->full_id == (full_id & entry->id_mask)) {
                        /* Honor exclusion entries. */
                        if (entry->name == NULL)
                                return (NULL);
                        return (entry);
                }
        }
        return (NULL);
}

int
ahd_pci_config(struct ahd_softc *ahd, const struct ahd_pci_identity *entry)
{
        struct scb_data *shared_scb_data;
        u_int            command;
        uint32_t         devconfig;
        uint16_t         subvendor; 
        int              error;

        shared_scb_data = NULL;
        ahd->description = entry->name;
        /*
         * Record if this is an HP board.
         */
        subvendor = ahd_pci_read_config(ahd->dev_softc,
                                        PCIR_SUBVEND_0, /*bytes*/2);
        if (subvendor == SUBID_HP)
                ahd->flags |= AHD_HP_BOARD;

        error = entry->setup(ahd);
        if (error != 0)
                return (error);
        
        devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
        if ((devconfig & PCIXINITPAT) == PCIXINIT_PCI33_66) {
                ahd->chip |= AHD_PCI;
                /* Disable PCIX workarounds when running in PCI mode. */
                ahd->bugs &= ~AHD_PCIX_BUG_MASK;
        } else {
                ahd->chip |= AHD_PCIX;
        }
        ahd->bus_description = pci_bus_modes[PCI_BUS_MODES_INDEX(devconfig)];

        ahd_power_state_change(ahd, AHD_POWER_STATE_D0);

        error = ahd_pci_map_registers(ahd);
        if (error != 0)
                return (error);

        /*
         * If we need to support high memory, enable dual
         * address cycles.  This bit must be set to enable
         * high address bit generation even if we are on a
         * 64bit bus (PCI64BIT set in devconfig).
         */
        if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
                if (bootverbose)
                        printk("%s: Enabling 39Bit Addressing\n",
                               ahd_name(ahd));
                devconfig = ahd_pci_read_config(ahd->dev_softc,
                                                DEVCONFIG, /*bytes*/4);
                devconfig |= DACEN;
                ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
                                     devconfig, /*bytes*/4);
        }
        
        /* Ensure busmastering is enabled */
        command = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
        command |= PCIM_CMD_BUSMASTEREN;
        ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, command, /*bytes*/2);

        error = ahd_softc_init(ahd);
        if (error != 0)
                return (error);

        ahd->bus_intr = ahd_pci_intr;

        error = ahd_reset(ahd, /*reinit*/FALSE);
        if (error != 0)
                return (ENXIO);

        ahd->pci_cachesize =
            ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME,
                                /*bytes*/1) & CACHESIZE;
        ahd->pci_cachesize *= 4;

        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        /* See if we have a SEEPROM and perform auto-term */
        error = ahd_check_extport(ahd);
        if (error != 0)
                return (error);

        /* Core initialization */
        error = ahd_init(ahd);
        if (error != 0)
                return (error);
        ahd->init_level++;

        /*
         * Allow interrupts now that we are completely setup.
         */
        return ahd_pci_map_int(ahd);
}

#ifdef CONFIG_PM
void
ahd_pci_suspend(struct ahd_softc *ahd)
{
        /*
         * Save chip register configuration data for chip resets
         * that occur during runtime and resume events.
         */
        ahd->suspend_state.pci_state.devconfig =
            ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
        ahd->suspend_state.pci_state.command =
            ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/1);
        ahd->suspend_state.pci_state.csize_lattime =
            ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME, /*bytes*/1);

}

void
ahd_pci_resume(struct ahd_softc *ahd)
{
        ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
                             ahd->suspend_state.pci_state.devconfig, /*bytes*/4);
        ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
                             ahd->suspend_state.pci_state.command, /*bytes*/1);
        ahd_pci_write_config(ahd->dev_softc, CSIZE_LATTIME,
                             ahd->suspend_state.pci_state.csize_lattime, /*bytes*/1);
}
#endif

/*
 * Perform some simple tests that should catch situations where
 * our registers are invalidly mapped.
 */
int
ahd_pci_test_register_access(struct ahd_softc *ahd)
{
        uint32_t cmd;
        u_int    targpcistat;
        u_int    pci_status1;
        int      error;
        uint8_t  hcntrl;

        error = EIO;

        /*
         * Enable PCI error interrupt status, but suppress NMIs
         * generated by SERR raised due to target aborts.
         */
        cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
        ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
                             cmd & ~PCIM_CMD_SERRESPEN, /*bytes*/2);

        /*
         * First a simple test to see if any
         * registers can be read.  Reading
         * HCNTRL has no side effects and has
         * at least one bit that is guaranteed to
         * be zero so it is a good register to
         * use for this test.
         */
        hcntrl = ahd_inb(ahd, HCNTRL);
        if (hcntrl == 0xFF)
                goto fail;

        /*
         * Next create a situation where write combining
         * or read prefetching could be initiated by the
         * CPU or host bridge.  Our device does not support
         * either, so look for data corruption and/or flaged
         * PCI errors.  First pause without causing another
         * chip reset.
         */
        hcntrl &= ~CHIPRST;
        ahd_outb(ahd, HCNTRL, hcntrl|PAUSE);
        while (ahd_is_paused(ahd) == 0)
                ;

        /* Clear any PCI errors that occurred before our driver attached. */
        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
        targpcistat = ahd_inb(ahd, TARGPCISTAT);
        ahd_outb(ahd, TARGPCISTAT, targpcistat);
        pci_status1 = ahd_pci_read_config(ahd->dev_softc,
                                          PCIR_STATUS + 1, /*bytes*/1);
        ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
                             pci_status1, /*bytes*/1);
        ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
        ahd_outb(ahd, CLRINT, CLRPCIINT);

        ahd_outb(ahd, SEQCTL0, PERRORDIS);
        ahd_outl(ahd, SRAM_BASE, 0x5aa555aa);
        if (ahd_inl(ahd, SRAM_BASE) != 0x5aa555aa)
                goto fail;

        if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                targpcistat = ahd_inb(ahd, TARGPCISTAT);
                if ((targpcistat & STA) != 0)
                        goto fail;
        }

        error = 0;

fail:
        if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {

                ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
                targpcistat = ahd_inb(ahd, TARGPCISTAT);

                /* Silently clear any latched errors. */
                ahd_outb(ahd, TARGPCISTAT, targpcistat);
                pci_status1 = ahd_pci_read_config(ahd->dev_softc,
                                                  PCIR_STATUS + 1, /*bytes*/1);
                ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
                                     pci_status1, /*bytes*/1);
                ahd_outb(ahd, CLRINT, CLRPCIINT);
        }
        ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS);
        ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2);
        return (error);
}

/*
 * Check the external port logic for a serial eeprom
 * and termination/cable detection contrls.
 */
static int
ahd_check_extport(struct ahd_softc *ahd)
{
        struct  vpd_config vpd;
        struct  seeprom_config *sc;
        u_int   adapter_control;
        int     have_seeprom;
        int     error;

        sc = ahd->seep_config;
        have_seeprom = ahd_acquire_seeprom(ahd);
        if (have_seeprom) {
                u_int start_addr;

                /*
                 * Fetch VPD for this function and parse it.
                 */
                if (bootverbose) 
                        printk("%s: Reading VPD from SEEPROM...",
                               ahd_name(ahd));

                /* Address is always in units of 16bit words */
                start_addr = ((2 * sizeof(*sc))
                            + (sizeof(vpd) * (ahd->channel - 'A'))) / 2;

                error = ahd_read_seeprom(ahd, (uint16_t *)&vpd,
                                         start_addr, sizeof(vpd)/2,
                                         /*bytestream*/TRUE);
                if (error == 0)
                        error = ahd_parse_vpddata(ahd, &vpd);
                if (bootverbose) 
                        printk("%s: VPD parsing %s\n",
                               ahd_name(ahd),
                               error == 0 ? "successful" : "failed");

                if (bootverbose) 
                        printk("%s: Reading SEEPROM...", ahd_name(ahd));

                /* Address is always in units of 16bit words */
                start_addr = (sizeof(*sc) / 2) * (ahd->channel - 'A');

                error = ahd_read_seeprom(ahd, (uint16_t *)sc,
                                         start_addr, sizeof(*sc)/2,
                                         /*bytestream*/FALSE);

                if (error != 0) {
                        printk("Unable to read SEEPROM\n");
                        have_seeprom = 0;
                } else {
                        have_seeprom = ahd_verify_cksum(sc);

                        if (bootverbose) {
                                if (have_seeprom == 0)
                                        printk ("checksum error\n");
                                else
                                        printk ("done.\n");
                        }
                }
                ahd_release_seeprom(ahd);
        }

        if (!have_seeprom) {
                u_int     nvram_scb;

                /*
                 * Pull scratch ram settings and treat them as
                 * if they are the contents of an seeprom if
                 * the 'ADPT', 'BIOS', or 'ASPI' signature is found
                 * in SCB 0xFF.  We manually compose the data as 16bit
                 * values to avoid endian issues.
                 */
                ahd_set_scbptr(ahd, 0xFF);
                nvram_scb = ahd_inb_scbram(ahd, SCB_BASE + NVRAM_SCB_OFFSET);
                if (nvram_scb != 0xFF
                 && ((ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
                   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'D'
                   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
                   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'T')
                  || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'B'
                   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'I'
                   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'O'
                   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'S')
                  || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
                   && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'S'
                   && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
                   && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'I'))) {
                        uint16_t *sc_data;
                        int       i;

                        ahd_set_scbptr(ahd, nvram_scb);
                        sc_data = (uint16_t *)sc;
                        for (i = 0; i < 64; i += 2)
                                *sc_data++ = ahd_inw_scbram(ahd, SCB_BASE+i);
                        have_seeprom = ahd_verify_cksum(sc);
                        if (have_seeprom)
                                ahd->flags |= AHD_SCB_CONFIG_USED;
                }
        }

#ifdef AHD_DEBUG
        if (have_seeprom != 0
         && (ahd_debug & AHD_DUMP_SEEPROM) != 0) {
                uint16_t *sc_data;
                int       i;

                printk("%s: Seeprom Contents:", ahd_name(ahd));
                sc_data = (uint16_t *)sc;
                for (i = 0; i < (sizeof(*sc)); i += 2)
                        printk("\n\t0x%.4x", sc_data[i]);
                printk("\n");
        }
#endif

        if (!have_seeprom) {
                if (bootverbose)
                        printk("%s: No SEEPROM available.\n", ahd_name(ahd));
                ahd->flags |= AHD_USEDEFAULTS;
                error = ahd_default_config(ahd);
                adapter_control = CFAUTOTERM|CFSEAUTOTERM;
                kfree(ahd->seep_config);
                ahd->seep_config = NULL;
        } else {
                error = ahd_parse_cfgdata(ahd, sc);
                adapter_control = sc->adapter_control;
        }
        if (error != 0)
                return (error);

        ahd_configure_termination(ahd, adapter_control);

        return (0);
}

static void
ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
{
        int      error;
        u_int    sxfrctl1;
        uint8_t  termctl;
        uint32_t devconfig;

        devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
        devconfig &= ~STPWLEVEL;
        if ((ahd->flags & AHD_STPWLEVEL_A) != 0)
                devconfig |= STPWLEVEL;
        if (bootverbose)
                printk("%s: STPWLEVEL is %s\n",
                       ahd_name(ahd), (devconfig & STPWLEVEL) ? "on" : "off");
        ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
 
        /* Make sure current sensing is off. */
        if ((ahd->flags & AHD_CURRENT_SENSING) != 0) {
                (void)ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
        }

        /*
         * Read to sense.  Write to set.
         */
        error = ahd_read_flexport(ahd, FLXADDR_TERMCTL, &termctl);
        if ((adapter_control & CFAUTOTERM) == 0) {
                if (bootverbose)
                        printk("%s: Manual Primary Termination\n",
                               ahd_name(ahd));
                termctl &= ~(FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH);
                if ((adapter_control & CFSTERM) != 0)
                        termctl |= FLX_TERMCTL_ENPRILOW;
                if ((adapter_control & CFWSTERM) != 0)
                        termctl |= FLX_TERMCTL_ENPRIHIGH;
        } else if (error != 0) {
                printk("%s: Primary Auto-Term Sensing failed! "
                       "Using Defaults.\n", ahd_name(ahd));
                termctl = FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH;
        }

        if ((adapter_control & CFSEAUTOTERM) == 0) {
                if (bootverbose)
                        printk("%s: Manual Secondary Termination\n",
                               ahd_name(ahd));
                termctl &= ~(FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH);
                if ((adapter_control & CFSELOWTERM) != 0)
                        termctl |= FLX_TERMCTL_ENSECLOW;
                if ((adapter_control & CFSEHIGHTERM) != 0)
                        termctl |= FLX_TERMCTL_ENSECHIGH;
        } else if (error != 0) {
                printk("%s: Secondary Auto-Term Sensing failed! "
                       "Using Defaults.\n", ahd_name(ahd));
                termctl |= FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH;
        }

        /*
         * Now set the termination based on what we found.
         */
        sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN;
        ahd->flags &= ~AHD_TERM_ENB_A;
        if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) {
                ahd->flags |= AHD_TERM_ENB_A;
                sxfrctl1 |= STPWEN;
        }
        /* Must set the latch once in order to be effective. */
        ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
        ahd_outb(ahd, SXFRCTL1, sxfrctl1);

        error = ahd_write_flexport(ahd, FLXADDR_TERMCTL, termctl);
        if (error != 0) {
                printk("%s: Unable to set termination settings!\n",
                       ahd_name(ahd));
        } else if (bootverbose) {
                printk("%s: Primary High byte termination %sabled\n",
                       ahd_name(ahd),
                       (termctl & FLX_TERMCTL_ENPRIHIGH) ? "En" : "Dis");

                printk("%s: Primary Low byte termination %sabled\n",
                       ahd_name(ahd),
                       (termctl & FLX_TERMCTL_ENPRILOW) ? "En" : "Dis");

                printk("%s: Secondary High byte termination %sabled\n",
                       ahd_name(ahd),
                       (termctl & FLX_TERMCTL_ENSECHIGH) ? "En" : "Dis");

                printk("%s: Secondary Low byte termination %sabled\n",
                       ahd_name(ahd),
                       (termctl & FLX_TERMCTL_ENSECLOW) ? "En" : "Dis");
        }
        return;
}

#define DPE     0x80
#define SSE     0x40
#define RMA     0x20
#define RTA     0x10
#define STA     0x08
#define DPR     0x01

static const char *split_status_source[] =
{
        "DFF0",
        "DFF1",
        "OVLY",
        "CMC",
};

static const char *pci_status_source[] =
{
        "DFF0",
        "DFF1",
        "SG",
        "CMC",
        "OVLY",
        "NONE",
        "MSI",
        "TARG"
};

static const char *split_status_strings[] =
{
        "%s: Received split response in %s.\n",
        "%s: Received split completion error message in %s\n",
        "%s: Receive overrun in %s\n",
        "%s: Count not complete in %s\n",
        "%s: Split completion data bucket in %s\n",
        "%s: Split completion address error in %s\n",
        "%s: Split completion byte count error in %s\n",
        "%s: Signaled Target-abort to early terminate a split in %s\n"
};

static const char *pci_status_strings[] =
{
        "%s: Data Parity Error has been reported via PERR# in %s\n",
        "%s: Target initial wait state error in %s\n",
        "%s: Split completion read data parity error in %s\n",
        "%s: Split completion address attribute parity error in %s\n",
        "%s: Received a Target Abort in %s\n",
        "%s: Received a Master Abort in %s\n",
        "%s: Signal System Error Detected in %s\n",
        "%s: Address or Write Phase Parity Error Detected in %s.\n"
};

static void
ahd_pci_intr(struct ahd_softc *ahd)
{
        uint8_t         pci_status[8];
        ahd_mode_state  saved_modes;
        u_int           pci_status1;
        u_int           intstat;
        u_int           i;
        u_int           reg;
        
        intstat = ahd_inb(ahd, INTSTAT);

        if ((intstat & SPLTINT) != 0)
                ahd_pci_split_intr(ahd, intstat);

        if ((intstat & PCIINT) == 0)
                return;

        printk("%s: PCI error Interrupt\n", ahd_name(ahd));
        saved_modes = ahd_save_modes(ahd);
        ahd_dump_card_state(ahd);
        ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
        for (i = 0, reg = DF0PCISTAT; i < 8; i++, reg++) {

                if (i == 5)
                        continue;
                pci_status[i] = ahd_inb(ahd, reg);
                /* Clear latched errors.  So our interrupt deasserts. */
                ahd_outb(ahd, reg, pci_status[i]);
        }

        for (i = 0; i < 8; i++) {
                u_int bit;
        
                if (i == 5)
                        continue;

                for (bit = 0; bit < 8; bit++) {

                        if ((pci_status[i] & (0x1 << bit)) != 0) {
                                static const char *s;

                                s = pci_status_strings[bit];
                                if (i == 7/*TARG*/ && bit == 3)
                                        s = "%s: Signaled Target Abort\n";
                                printk(s, ahd_name(ahd), pci_status_source[i]);
                        }
                }       
        }
        pci_status1 = ahd_pci_read_config(ahd->dev_softc,
                                          PCIR_STATUS + 1, /*bytes*/1);
        ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
                             pci_status1, /*bytes*/1);
        ahd_restore_modes(ahd, saved_modes);
        ahd_outb(ahd, CLRINT, CLRPCIINT);
        ahd_unpause(ahd);
}

static void
ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
{
        uint8_t         split_status[4];
        uint8_t         split_status1[4];
        uint8_t         sg_split_status[2];
        uint8_t         sg_split_status1[2];
        ahd_mode_state  saved_modes;
        u_int           i;
        uint16_t        pcix_status;

        /*
         * Check for splits in all modes.  Modes 0 and 1
         * additionally have SG engine splits to look at.
         */
        pcix_status = ahd_pci_read_config(ahd->dev_softc, PCIXR_STATUS,
                                          /*bytes*/2);
        printk("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
               ahd_name(ahd), pcix_status);
        saved_modes = ahd_save_modes(ahd);
        for (i = 0; i < 4; i++) {
                ahd_set_modes(ahd, i, i);

                split_status[i] = ahd_inb(ahd, DCHSPLTSTAT0);
                split_status1[i] = ahd_inb(ahd, DCHSPLTSTAT1);
                /* Clear latched errors.  So our interrupt deasserts. */
                ahd_outb(ahd, DCHSPLTSTAT0, split_status[i]);
                ahd_outb(ahd, DCHSPLTSTAT1, split_status1[i]);
                if (i > 1)
                        continue;
                sg_split_status[i] = ahd_inb(ahd, SGSPLTSTAT0);
                sg_split_status1[i] = ahd_inb(ahd, SGSPLTSTAT1);
                /* Clear latched errors.  So our interrupt deasserts. */
                ahd_outb(ahd, SGSPLTSTAT0, sg_split_status[i]);
                ahd_outb(ahd, SGSPLTSTAT1, sg_split_status1[i]);
        }

        for (i = 0; i < 4; i++) {
                u_int bit;

                for (bit = 0; bit < 8; bit++) {

                        if ((split_status[i] & (0x1 << bit)) != 0) {
                                static const char *s;

                                s = split_status_strings[bit];
                                printk(s, ahd_name(ahd),
                                       split_status_source[i]);
                        }

                        if (i > 1)
                                continue;

                        if ((sg_split_status[i] & (0x1 << bit)) != 0) {
                                static const char *s;

                                s = split_status_strings[bit];
                                printk(s, ahd_name(ahd), "SG");
                        }
                }
        }
        /*
         * Clear PCI-X status bits.
         */
        ahd_pci_write_config(ahd->dev_softc, PCIXR_STATUS,
                             pcix_status, /*bytes*/2);
        ahd_outb(ahd, CLRINT, CLRSPLTINT);
        ahd_restore_modes(ahd, saved_modes);
}

static int
ahd_aic7901_setup(struct ahd_softc *ahd)
{

        ahd->chip = AHD_AIC7901;
        ahd->features = AHD_AIC7901_FE;
        return (ahd_aic790X_setup(ahd));
}

static int
ahd_aic7901A_setup(struct ahd_softc *ahd)
{

        ahd->chip = AHD_AIC7901A;
        ahd->features = AHD_AIC7901A_FE;
        return (ahd_aic790X_setup(ahd));
}

static int
ahd_aic7902_setup(struct ahd_softc *ahd)
{
        ahd->chip = AHD_AIC7902;
        ahd->features = AHD_AIC7902_FE;
        return (ahd_aic790X_setup(ahd));
}

static int
ahd_aic790X_setup(struct ahd_softc *ahd)
{
        ahd_dev_softc_t pci;
        u_int rev;

        pci = ahd->dev_softc;
        rev = ahd_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
        if (rev < ID_AIC7902_PCI_REV_A4) {
                printk("%s: Unable to attach to unsupported chip revision %d\n",
                       ahd_name(ahd), rev);
                ahd_pci_write_config(pci, PCIR_COMMAND, 0, /*bytes*/2);
                return (ENXIO);
        }
        ahd->channel = ahd_get_pci_function(pci) + 'A';
        if (rev < ID_AIC7902_PCI_REV_B0) {
                /*
                 * Enable A series workarounds.
                 */
                ahd->bugs |= AHD_SENT_SCB_UPDATE_BUG|AHD_ABORT_LQI_BUG
                          |  AHD_PKT_BITBUCKET_BUG|AHD_LONG_SETIMO_BUG
                          |  AHD_NLQICRC_DELAYED_BUG|AHD_SCSIRST_BUG
                          |  AHD_LQO_ATNO_BUG|AHD_AUTOFLUSH_BUG
                          |  AHD_CLRLQO_AUTOCLR_BUG|AHD_PCIX_MMAPIO_BUG
                          |  AHD_PCIX_CHIPRST_BUG|AHD_PCIX_SCBRAM_RD_BUG
                          |  AHD_PKTIZED_STATUS_BUG|AHD_PKT_LUN_BUG
                          |  AHD_MDFF_WSCBPTR_BUG|AHD_REG_SLOW_SETTLE_BUG
                          |  AHD_SET_MODE_BUG|AHD_BUSFREEREV_BUG
                          |  AHD_NONPACKFIFO_BUG|AHD_PACED_NEGTABLE_BUG
                          |  AHD_FAINT_LED_BUG;

                /*
                 * IO Cell parameter setup.
                 */
                AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);

                if ((ahd->flags & AHD_HP_BOARD) == 0)
                        AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
        } else {
                /* This is revision B and newer. */
                extern uint32_t aic79xx_slowcrc;
                u_int devconfig1;

                ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
                              |  AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY
                              |  AHD_BUSFREEREV_BUG;
                ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;

                /* If the user requested that the SLOWCRC bit to be set. */
                if (aic79xx_slowcrc)
                        ahd->features |= AHD_AIC79XXB_SLOWCRC;

                /*
                 * Some issues have been resolved in the 7901B.
                 */
                if ((ahd->features & AHD_MULTI_FUNC) != 0)
                        ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG;

                /*
                 * IO Cell parameter setup.
                 */
                AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
                AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB);
                AHD_SET_AMPLITUDE(ahd, AHD_AMPLITUDE_DEF);

                /*
                 * Set the PREQDIS bit for H2B which disables some workaround
                 * that doesn't work on regular PCI busses.
                 * XXX - Find out exactly what this does from the hardware
                 *       folks!
                 */
                devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
                ahd_pci_write_config(pci, DEVCONFIG1,
                                     devconfig1|PREQDIS, /*bytes*/1);
                devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
        }

        return (0);
}