i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / scsi / libsas / sas_internal.h
blob14e21b5fb8ba77b972b6052abb2adc59052d2b1e
1 /*
2 * Serial Attached SCSI (SAS) class internal header file
4 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
5 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 * This file is licensed under GPLv2.
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful, but
15 * WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17 * General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
22 * USA
26 #ifndef _SAS_INTERNAL_H_
27 #define _SAS_INTERNAL_H_
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_host.h>
31 #include <scsi/scsi_transport_sas.h>
32 #include <scsi/libsas.h>
34 #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
36 #define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
38 #define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
39 #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
41 void sas_scsi_recover_host(struct Scsi_Host *shost);
43 int sas_show_class(enum sas_class class, char *buf);
44 int sas_show_proto(enum sas_protocol proto, char *buf);
45 int sas_show_linkrate(enum sas_linkrate linkrate, char *buf);
46 int sas_show_oob_mode(enum sas_oob_mode oob_mode, char *buf);
48 int sas_register_phys(struct sas_ha_struct *sas_ha);
49 void sas_unregister_phys(struct sas_ha_struct *sas_ha);
51 int sas_register_ports(struct sas_ha_struct *sas_ha);
52 void sas_unregister_ports(struct sas_ha_struct *sas_ha);
54 enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
56 int sas_init_queue(struct sas_ha_struct *sas_ha);
57 int sas_init_events(struct sas_ha_struct *sas_ha);
58 void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
60 void sas_deform_port(struct asd_sas_phy *phy, int gone);
62 void sas_porte_bytes_dmaed(struct work_struct *work);
63 void sas_porte_broadcast_rcvd(struct work_struct *work);
64 void sas_porte_link_reset_err(struct work_struct *work);
65 void sas_porte_timer_event(struct work_struct *work);
66 void sas_porte_hard_reset(struct work_struct *work);
68 int sas_notify_lldd_dev_found(struct domain_device *);
69 void sas_notify_lldd_dev_gone(struct domain_device *);
71 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
72 enum phy_func phy_func, struct sas_phy_linkrates *);
73 int sas_smp_get_phy_events(struct sas_phy *phy);
75 struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
77 void sas_hae_reset(struct work_struct *work);
79 #ifdef CONFIG_SCSI_SAS_HOST_SMP
80 extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
81 struct request *rsp);
82 #else
83 static inline int sas_smp_host_handler(struct Scsi_Host *shost,
84 struct request *req,
85 struct request *rsp)
87 shost_printk(KERN_ERR, shost,
88 "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
89 return -EINVAL;
91 #endif
93 static inline void sas_queue_event(int event, spinlock_t *lock,
94 unsigned long *pending,
95 struct work_struct *work,
96 struct sas_ha_struct *sas_ha)
98 unsigned long flags;
100 spin_lock_irqsave(lock, flags);
101 if (test_bit(event, pending)) {
102 spin_unlock_irqrestore(lock, flags);
103 return;
105 __set_bit(event, pending);
106 spin_unlock_irqrestore(lock, flags);
108 spin_lock_irqsave(&sas_ha->state_lock, flags);
109 if (sas_ha->state != SAS_HA_UNREGISTERED) {
110 scsi_queue_work(sas_ha->core.shost, work);
112 spin_unlock_irqrestore(&sas_ha->state_lock, flags);
115 static inline void sas_begin_event(int event, spinlock_t *lock,
116 unsigned long *pending)
118 unsigned long flags;
120 spin_lock_irqsave(lock, flags);
121 __clear_bit(event, pending);
122 spin_unlock_irqrestore(lock, flags);
125 static inline void sas_fill_in_rphy(struct domain_device *dev,
126 struct sas_rphy *rphy)
128 rphy->identify.sas_address = SAS_ADDR(dev->sas_addr);
129 rphy->identify.initiator_port_protocols = dev->iproto;
130 rphy->identify.target_port_protocols = dev->tproto;
131 switch (dev->dev_type) {
132 case SATA_DEV:
133 /* FIXME: need sata device type */
134 case SAS_END_DEV:
135 rphy->identify.device_type = SAS_END_DEVICE;
136 break;
137 case EDGE_DEV:
138 rphy->identify.device_type = SAS_EDGE_EXPANDER_DEVICE;
139 break;
140 case FANOUT_DEV:
141 rphy->identify.device_type = SAS_FANOUT_EXPANDER_DEVICE;
142 break;
143 default:
144 rphy->identify.device_type = SAS_PHY_UNUSED;
145 break;
149 static inline void sas_add_parent_port(struct domain_device *dev, int phy_id)
151 struct expander_device *ex = &dev->ex_dev;
152 struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
154 if (!ex->parent_port) {
155 ex->parent_port = sas_port_alloc(&dev->rphy->dev, phy_id);
156 /* FIXME: error handling */
157 BUG_ON(!ex->parent_port);
158 BUG_ON(sas_port_add(ex->parent_port));
159 sas_port_mark_backlink(ex->parent_port);
161 sas_port_add_phy(ex->parent_port, ex_phy->phy);
164 #endif /* _SAS_INTERNAL_H_ */