drivers/staging/bcm/target_params.h

   1 #ifndef TARGET_PARAMS_H
   2 #define TARGET_PARAMS_H
   3
   4 typedef struct _TARGET_PARAMS
   5 {
   6       B_UINT32 m_u32CfgVersion;
   7
   8       // Scanning Related Params
   9       B_UINT32 m_u32CenterFrequency;
  10       B_UINT32 m_u32BandAScan;
  11       B_UINT32 m_u32BandBScan;
  12       B_UINT32 m_u32BandCScan;
  13
  14
  15       // QoS Params
  16       B_UINT32 m_u32ErtpsOptions;
  17
  18       B_UINT32 m_u32PHSEnable;
  19
  20
  21       // HO Params
  22       B_UINT32 m_u32HoEnable;
  23
  24       B_UINT32 m_u32HoReserved1;
  25       B_UINT32 m_u32HoReserved2;
  26       // Power Control Params
  27
  28       B_UINT32 m_u32MimoEnable;
  29
  30       B_UINT32 m_u32SecurityEnable;
  31
  32       B_UINT32 m_u32PowerSavingModesEnable; //bit 1: 1 Idlemode enable; bit2: 1 Sleepmode Enable
  33           /* PowerSaving Mode Options:
  34              bit 0 = 1: CPE mode - to keep pcmcia if alive;
  35              bit 1 = 1: CINR reporing in Idlemode Msg
  36              bit 2 = 1: Default PSC Enable in sleepmode*/
  37       B_UINT32 m_u32PowerSavingModeOptions;
  38
  39       B_UINT32 m_u32ArqEnable;
  40
  41       // From Version #3, the HARQ section renamed as general
  42       B_UINT32 m_u32HarqEnable;
  43        // EEPROM Param Location
  44        B_UINT32  m_u32EEPROMFlag;
  45        // BINARY TYPE - 4th MSByte: Interface Type -  3rd MSByte: Vendor Type - 2nd MSByte
  46        // Unused - LSByte
  47       B_UINT32   m_u32Customize;
  48       B_UINT32   m_u32ConfigBW;  /* In Hz */
  49       B_UINT32   m_u32ShutDownInitThresholdTimer;
  50
  51       B_UINT32  m_u32RadioParameter;
  52       B_UINT32  m_u32PhyParameter1;
  53       B_UINT32  m_u32PhyParameter2;
  54       B_UINT32  m_u32PhyParameter3;
  55
  56       B_UINT32    m_u32TestOptions; // in eval mode only; lower 16bits = basic cid for testing; then bit 16 is test cqich,bit 17  test init rang; bit 18 test periodic rang and bit 19 is test harq ack/nack
  57
  58         B_UINT32 m_u32MaxMACDataperDLFrame;
  59         B_UINT32 m_u32MaxMACDataperULFrame;
  60
  61         B_UINT32 m_u32Corr2MacFlags;
  62
  63     //adding driver params.
  64         B_UINT32 HostDrvrConfig1;
  65     B_UINT32 HostDrvrConfig2;
  66     B_UINT32 HostDrvrConfig3;
  67     B_UINT32 HostDrvrConfig4;
  68     B_UINT32 HostDrvrConfig5;
  69     B_UINT32 HostDrvrConfig6;
  70     B_UINT32 m_u32SegmentedPUSCenable;
  71
  72         // removed SHUT down related 'unused' params from here to sync 4.x and 5.x CFG files..
  73
  74     //BAMC Related Parameters
  75     //Bit 0-15 Band AMC signaling configuration: Bit 1 = 1  Enable Band AMC signaling.
  76     //bit 16-31 Band AMC Data configuration: Bit 16 = 1  Band AMC 2x3 support.
  77         B_UINT32 m_u32BandAMCEnable;
  78
  79 } stTargetParams,TARGET_PARAMS,*PTARGET_PARAMS, STARGETPARAMS, *PSTARGETPARAMS;
  80
  81 #endif