2 * drivers/staging/omapdrm/omap_drv.c
4 * Copyright (C) 2011 Texas Instruments
5 * Author: Rob Clark <rob@ti.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published by
9 * the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but WITHOUT
12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 * You should have received a copy of the GNU General Public License along with
17 * this program. If not, see <http://www.gnu.org/licenses/>.
22 #include "drm_crtc_helper.h"
23 #include "drm_fb_helper.h"
25 #define DRIVER_NAME MODULE_NAME
26 #define DRIVER_DESC "OMAP DRM"
27 #define DRIVER_DATE "20110917"
28 #define DRIVER_MAJOR 1
29 #define DRIVER_MINOR 0
30 #define DRIVER_PATCHLEVEL 0
32 struct drm_device
*drm_device
;
34 static int num_crtc
= CONFIG_DRM_OMAP_NUM_CRTCS
;
36 MODULE_PARM_DESC(num_crtc
, "Number of overlays to use as CRTCs");
37 module_param(num_crtc
, int, 0600);
43 /* Notes about mapping DSS and DRM entities:
45 * encoder: manager.. with some extension to allow one primary CRTC
46 * and zero or more video CRTC's to be mapped to one encoder?
47 * connector: dssdev.. manager can be attached/detached from different
51 static void omap_fb_output_poll_changed(struct drm_device
*dev
)
53 struct omap_drm_private
*priv
= dev
->dev_private
;
56 drm_fb_helper_hotplug_event(priv
->fbdev
);
60 static struct drm_mode_config_funcs omap_mode_config_funcs
= {
61 .fb_create
= omap_framebuffer_create
,
62 .output_poll_changed
= omap_fb_output_poll_changed
,
65 static int get_connector_type(struct omap_dss_device
*dssdev
)
67 switch (dssdev
->type
) {
68 case OMAP_DISPLAY_TYPE_HDMI
:
69 return DRM_MODE_CONNECTOR_HDMIA
;
70 case OMAP_DISPLAY_TYPE_DPI
:
71 if (!strcmp(dssdev
->name
, "dvi"))
72 return DRM_MODE_CONNECTOR_DVID
;
75 return DRM_MODE_CONNECTOR_Unknown
;
79 #if 0 /* enable when dss2 supports hotplug */
80 static int omap_drm_notifier(struct notifier_block
*nb
,
81 unsigned long evt
, void *arg
)
84 case OMAP_DSS_SIZE_CHANGE
:
85 case OMAP_DSS_HOTPLUG_CONNECT
:
86 case OMAP_DSS_HOTPLUG_DISCONNECT
: {
87 struct drm_device
*dev
= drm_device
;
88 DBG("hotplug event: evt=%d, dev=%p", evt
, dev
);
90 drm_sysfs_hotplug_event(dev
);
94 default: /* don't care about other events for now */
100 static void dump_video_chains(void)
104 DBG("dumping video chains: ");
105 for (i
= 0; i
< omap_dss_get_num_overlays(); i
++) {
106 struct omap_overlay
*ovl
= omap_dss_get_overlay(i
);
107 struct omap_overlay_manager
*mgr
= ovl
->manager
;
108 struct omap_dss_device
*dssdev
= mgr
? mgr
->device
: NULL
;
110 DBG("%d: %s -> %s -> %s", i
, ovl
->name
, mgr
->name
,
113 DBG("%d: %s -> %s", i
, ovl
->name
, mgr
->name
);
115 DBG("%d: %s", i
, ovl
->name
);
120 /* create encoders for each manager */
121 static int create_encoder(struct drm_device
*dev
,
122 struct omap_overlay_manager
*mgr
)
124 struct omap_drm_private
*priv
= dev
->dev_private
;
125 struct drm_encoder
*encoder
= omap_encoder_init(dev
, mgr
);
128 dev_err(dev
->dev
, "could not create encoder: %s\n",
133 BUG_ON(priv
->num_encoders
>= ARRAY_SIZE(priv
->encoders
));
135 priv
->encoders
[priv
->num_encoders
++] = encoder
;
140 /* create connectors for each display device */
141 static int create_connector(struct drm_device
*dev
,
142 struct omap_dss_device
*dssdev
)
144 struct omap_drm_private
*priv
= dev
->dev_private
;
145 static struct notifier_block
*notifier
;
146 struct drm_connector
*connector
;
149 if (!dssdev
->driver
) {
150 dev_warn(dev
->dev
, "%s has no driver.. skipping it\n",
155 if (!(dssdev
->driver
->get_timings
||
156 dssdev
->driver
->read_edid
)) {
157 dev_warn(dev
->dev
, "%s driver does not support "
158 "get_timings or read_edid.. skipping it!\n",
163 connector
= omap_connector_init(dev
,
164 get_connector_type(dssdev
), dssdev
);
167 dev_err(dev
->dev
, "could not create connector: %s\n",
172 BUG_ON(priv
->num_connectors
>= ARRAY_SIZE(priv
->connectors
));
174 priv
->connectors
[priv
->num_connectors
++] = connector
;
176 #if 0 /* enable when dss2 supports hotplug */
177 notifier
= kzalloc(sizeof(struct notifier_block
), GFP_KERNEL
);
178 notifier
->notifier_call
= omap_drm_notifier
;
179 omap_dss_add_notify(dssdev
, notifier
);
184 for (j
= 0; j
< priv
->num_encoders
; j
++) {
185 struct omap_overlay_manager
*mgr
=
186 omap_encoder_get_manager(priv
->encoders
[j
]);
187 if (mgr
->device
== dssdev
) {
188 drm_mode_connector_attach_encoder(connector
,
196 /* create up to max_overlays CRTCs mapping to overlays.. by default,
197 * connect the overlays to different managers/encoders, giving priority
198 * to encoders connected to connectors with a detected connection
200 static int create_crtc(struct drm_device
*dev
, struct omap_overlay
*ovl
,
201 int *j
, unsigned int connected_connectors
)
203 struct omap_drm_private
*priv
= dev
->dev_private
;
204 struct omap_overlay_manager
*mgr
= NULL
;
205 struct drm_crtc
*crtc
;
207 /* find next best connector, ones with detected connection first
209 while (*j
< priv
->num_connectors
&& !mgr
) {
210 if (connected_connectors
& (1 << *j
)) {
211 struct drm_encoder
*encoder
=
212 omap_connector_attached_encoder(
213 priv
->connectors
[*j
]);
215 mgr
= omap_encoder_get_manager(encoder
);
221 /* if we couldn't find another connected connector, lets start
222 * looking at the unconnected connectors:
224 * note: it might not be immediately apparent, but thanks to
225 * the !mgr check in both this loop and the one above, the only
226 * way to enter this loop is with *j == priv->num_connectors,
227 * so idx can never go negative.
229 while (*j
< 2 * priv
->num_connectors
&& !mgr
) {
230 int idx
= *j
- priv
->num_connectors
;
231 if (!(connected_connectors
& (1 << idx
))) {
232 struct drm_encoder
*encoder
=
233 omap_connector_attached_encoder(
234 priv
->connectors
[idx
]);
236 mgr
= omap_encoder_get_manager(encoder
);
242 crtc
= omap_crtc_init(dev
, ovl
, priv
->num_crtcs
);
245 dev_err(dev
->dev
, "could not create CRTC: %s\n",
250 BUG_ON(priv
->num_crtcs
>= ARRAY_SIZE(priv
->crtcs
));
252 priv
->crtcs
[priv
->num_crtcs
++] = crtc
;
257 static int create_plane(struct drm_device
*dev
, struct omap_overlay
*ovl
,
258 unsigned int possible_crtcs
)
260 struct omap_drm_private
*priv
= dev
->dev_private
;
261 struct drm_plane
*plane
=
262 omap_plane_init(dev
, ovl
, possible_crtcs
, false);
265 dev_err(dev
->dev
, "could not create plane: %s\n",
270 BUG_ON(priv
->num_planes
>= ARRAY_SIZE(priv
->planes
));
272 priv
->planes
[priv
->num_planes
++] = plane
;
277 static int match_dev_name(struct omap_dss_device
*dssdev
, void *data
)
279 return !strcmp(dssdev
->name
, data
);
282 static unsigned int detect_connectors(struct drm_device
*dev
)
284 struct omap_drm_private
*priv
= dev
->dev_private
;
285 unsigned int connected_connectors
= 0;
288 for (i
= 0; i
< priv
->num_connectors
; i
++) {
289 struct drm_connector
*connector
= priv
->connectors
[i
];
290 if (omap_connector_detect(connector
, true) ==
291 connector_status_connected
) {
292 connected_connectors
|= (1 << i
);
296 return connected_connectors
;
299 static int omap_modeset_init(struct drm_device
*dev
)
301 const struct omap_drm_platform_data
*pdata
= dev
->dev
->platform_data
;
302 struct omap_kms_platform_data
*kms_pdata
= NULL
;
303 struct omap_drm_private
*priv
= dev
->dev_private
;
304 struct omap_dss_device
*dssdev
= NULL
;
306 unsigned int connected_connectors
= 0;
308 drm_mode_config_init(dev
);
310 if (pdata
&& pdata
->kms_pdata
) {
311 kms_pdata
= pdata
->kms_pdata
;
313 /* if platform data is provided by the board file, use it to
314 * control which overlays, managers, and devices we own.
316 for (i
= 0; i
< kms_pdata
->mgr_cnt
; i
++) {
317 struct omap_overlay_manager
*mgr
=
318 omap_dss_get_overlay_manager(
319 kms_pdata
->mgr_ids
[i
]);
320 create_encoder(dev
, mgr
);
323 for (i
= 0; i
< kms_pdata
->dev_cnt
; i
++) {
324 struct omap_dss_device
*dssdev
=
325 omap_dss_find_device(
326 (void *)kms_pdata
->dev_names
[i
],
329 dev_warn(dev
->dev
, "no such dssdev: %s\n",
330 kms_pdata
->dev_names
[i
]);
333 create_connector(dev
, dssdev
);
336 connected_connectors
= detect_connectors(dev
);
339 for (i
= 0; i
< kms_pdata
->ovl_cnt
; i
++) {
340 struct omap_overlay
*ovl
=
341 omap_dss_get_overlay(kms_pdata
->ovl_ids
[i
]);
342 create_crtc(dev
, ovl
, &j
, connected_connectors
);
345 for (i
= 0; i
< kms_pdata
->pln_cnt
; i
++) {
346 struct omap_overlay
*ovl
=
347 omap_dss_get_overlay(kms_pdata
->pln_ids
[i
]);
348 create_plane(dev
, ovl
, (1 << priv
->num_crtcs
) - 1);
351 /* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
352 * to make educated guesses about everything else
354 int max_overlays
= min(omap_dss_get_num_overlays(), num_crtc
);
356 for (i
= 0; i
< omap_dss_get_num_overlay_managers(); i
++) {
357 create_encoder(dev
, omap_dss_get_overlay_manager(i
));
360 for_each_dss_dev(dssdev
) {
361 create_connector(dev
, dssdev
);
364 connected_connectors
= detect_connectors(dev
);
367 for (i
= 0; i
< max_overlays
; i
++) {
368 create_crtc(dev
, omap_dss_get_overlay(i
),
369 &j
, connected_connectors
);
372 /* use any remaining overlays as drm planes */
373 for (; i
< omap_dss_get_num_overlays(); i
++) {
374 struct omap_overlay
*ovl
= omap_dss_get_overlay(i
);
375 create_plane(dev
, ovl
, (1 << priv
->num_crtcs
) - 1);
379 /* for now keep the mapping of CRTCs and encoders static.. */
380 for (i
= 0; i
< priv
->num_encoders
; i
++) {
381 struct drm_encoder
*encoder
= priv
->encoders
[i
];
382 struct omap_overlay_manager
*mgr
=
383 omap_encoder_get_manager(encoder
);
385 encoder
->possible_crtcs
= (1 << priv
->num_crtcs
) - 1;
387 DBG("%s: possible_crtcs=%08x", mgr
->name
,
388 encoder
->possible_crtcs
);
393 dev
->mode_config
.min_width
= 32;
394 dev
->mode_config
.min_height
= 32;
396 /* note: eventually will need some cpu_is_omapXYZ() type stuff here
397 * to fill in these limits properly on different OMAP generations..
399 dev
->mode_config
.max_width
= 2048;
400 dev
->mode_config
.max_height
= 2048;
402 dev
->mode_config
.funcs
= &omap_mode_config_funcs
;
407 static void omap_modeset_free(struct drm_device
*dev
)
409 drm_mode_config_cleanup(dev
);
417 static int ioctl_get_param(struct drm_device
*dev
, void *data
,
418 struct drm_file
*file_priv
)
420 struct drm_omap_param
*args
= data
;
422 DBG("%p: param=%llu", dev
, args
->param
);
424 switch (args
->param
) {
425 case OMAP_PARAM_CHIPSET_ID
:
426 args
->value
= GET_OMAP_TYPE
;
429 DBG("unknown parameter %lld", args
->param
);
436 static int ioctl_set_param(struct drm_device
*dev
, void *data
,
437 struct drm_file
*file_priv
)
439 struct drm_omap_param
*args
= data
;
441 switch (args
->param
) {
443 DBG("unknown parameter %lld", args
->param
);
450 static int ioctl_gem_new(struct drm_device
*dev
, void *data
,
451 struct drm_file
*file_priv
)
453 struct drm_omap_gem_new
*args
= data
;
454 DBG("%p:%p: size=0x%08x, flags=%08x", dev
, file_priv
,
455 args
->size
.bytes
, args
->flags
);
456 return omap_gem_new_handle(dev
, file_priv
, args
->size
,
457 args
->flags
, &args
->handle
);
460 static int ioctl_gem_cpu_prep(struct drm_device
*dev
, void *data
,
461 struct drm_file
*file_priv
)
463 struct drm_omap_gem_cpu_prep
*args
= data
;
464 struct drm_gem_object
*obj
;
467 VERB("%p:%p: handle=%d, op=%x", dev
, file_priv
, args
->handle
, args
->op
);
469 obj
= drm_gem_object_lookup(dev
, file_priv
, args
->handle
);
474 ret
= omap_gem_op_sync(obj
, args
->op
);
477 ret
= omap_gem_op_start(obj
, args
->op
);
480 drm_gem_object_unreference_unlocked(obj
);
485 static int ioctl_gem_cpu_fini(struct drm_device
*dev
, void *data
,
486 struct drm_file
*file_priv
)
488 struct drm_omap_gem_cpu_fini
*args
= data
;
489 struct drm_gem_object
*obj
;
492 VERB("%p:%p: handle=%d", dev
, file_priv
, args
->handle
);
494 obj
= drm_gem_object_lookup(dev
, file_priv
, args
->handle
);
499 /* XXX flushy, flushy */
503 ret
= omap_gem_op_finish(obj
, args
->op
);
506 drm_gem_object_unreference_unlocked(obj
);
511 static int ioctl_gem_info(struct drm_device
*dev
, void *data
,
512 struct drm_file
*file_priv
)
514 struct drm_omap_gem_info
*args
= data
;
515 struct drm_gem_object
*obj
;
518 DBG("%p:%p: handle=%d", dev
, file_priv
, args
->handle
);
520 obj
= drm_gem_object_lookup(dev
, file_priv
, args
->handle
);
525 args
->size
= omap_gem_mmap_size(obj
);
526 args
->offset
= omap_gem_mmap_offset(obj
);
528 drm_gem_object_unreference_unlocked(obj
);
533 struct drm_ioctl_desc ioctls
[DRM_COMMAND_END
- DRM_COMMAND_BASE
] = {
534 DRM_IOCTL_DEF_DRV(OMAP_GET_PARAM
, ioctl_get_param
, DRM_UNLOCKED
|DRM_AUTH
),
535 DRM_IOCTL_DEF_DRV(OMAP_SET_PARAM
, ioctl_set_param
, DRM_UNLOCKED
|DRM_AUTH
|DRM_MASTER
|DRM_ROOT_ONLY
),
536 DRM_IOCTL_DEF_DRV(OMAP_GEM_NEW
, ioctl_gem_new
, DRM_UNLOCKED
|DRM_AUTH
),
537 DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_PREP
, ioctl_gem_cpu_prep
, DRM_UNLOCKED
|DRM_AUTH
),
538 DRM_IOCTL_DEF_DRV(OMAP_GEM_CPU_FINI
, ioctl_gem_cpu_fini
, DRM_UNLOCKED
|DRM_AUTH
),
539 DRM_IOCTL_DEF_DRV(OMAP_GEM_INFO
, ioctl_gem_info
, DRM_UNLOCKED
|DRM_AUTH
),
547 * load - setup chip and create an initial config
549 * @flags: startup flags
551 * The driver load routine has to do several things:
552 * - initialize the memory manager
553 * - allocate initial config memory
554 * - setup the DRM framebuffer with the allocated memory
556 static int dev_load(struct drm_device
*dev
, unsigned long flags
)
558 struct omap_drm_private
*priv
;
561 DBG("load: dev=%p", dev
);
565 priv
= kzalloc(sizeof(*priv
), GFP_KERNEL
);
567 dev_err(dev
->dev
, "could not allocate priv\n");
571 dev
->dev_private
= priv
;
575 ret
= omap_modeset_init(dev
);
577 dev_err(dev
->dev
, "omap_modeset_init failed: ret=%d\n", ret
);
578 dev
->dev_private
= NULL
;
583 priv
->fbdev
= omap_fbdev_init(dev
);
585 dev_warn(dev
->dev
, "omap_fbdev_init failed\n");
586 /* well, limp along without an fbdev.. maybe X11 will work? */
589 drm_kms_helper_poll_init(dev
);
591 ret
= drm_vblank_init(dev
, priv
->num_crtcs
);
593 dev_warn(dev
->dev
, "could not init vblank\n");
599 static int dev_unload(struct drm_device
*dev
)
601 DBG("unload: dev=%p", dev
);
603 drm_vblank_cleanup(dev
);
604 drm_kms_helper_poll_fini(dev
);
606 omap_fbdev_free(dev
);
607 omap_modeset_free(dev
);
608 omap_gem_deinit(dev
);
610 kfree(dev
->dev_private
);
611 dev
->dev_private
= NULL
;
616 static int dev_open(struct drm_device
*dev
, struct drm_file
*file
)
618 file
->driver_priv
= NULL
;
620 DBG("open: dev=%p, file=%p", dev
, file
);
625 static int dev_firstopen(struct drm_device
*dev
)
627 DBG("firstopen: dev=%p", dev
);
632 * lastclose - clean up after all DRM clients have exited
635 * Take care of cleaning up after all DRM clients have exited. In the
636 * mode setting case, we want to restore the kernel's initial mode (just
637 * in case the last client left us in a bad state).
639 static void dev_lastclose(struct drm_device
*dev
)
641 /* we don't support vga-switcheroo.. so just make sure the fbdev
644 struct omap_drm_private
*priv
= dev
->dev_private
;
647 DBG("lastclose: dev=%p", dev
);
649 ret
= drm_fb_helper_restore_fbdev_mode(priv
->fbdev
);
651 DBG("failed to restore crtc mode");
654 static void dev_preclose(struct drm_device
*dev
, struct drm_file
*file
)
656 DBG("preclose: dev=%p", dev
);
659 static void dev_postclose(struct drm_device
*dev
, struct drm_file
*file
)
661 DBG("postclose: dev=%p, file=%p", dev
, file
);
665 * enable_vblank - enable vblank interrupt events
667 * @crtc: which irq to enable
669 * Enable vblank interrupts for @crtc. If the device doesn't have
670 * a hardware vblank counter, this routine should be a no-op, since
671 * interrupts will have to stay on to keep the count accurate.
674 * Zero on success, appropriate errno if the given @crtc's vblank
675 * interrupt cannot be enabled.
677 static int dev_enable_vblank(struct drm_device
*dev
, int crtc
)
679 DBG("enable_vblank: dev=%p, crtc=%d", dev
, crtc
);
684 * disable_vblank - disable vblank interrupt events
686 * @crtc: which irq to enable
688 * Disable vblank interrupts for @crtc. If the device doesn't have
689 * a hardware vblank counter, this routine should be a no-op, since
690 * interrupts will have to stay on to keep the count accurate.
692 static void dev_disable_vblank(struct drm_device
*dev
, int crtc
)
694 DBG("disable_vblank: dev=%p, crtc=%d", dev
, crtc
);
697 static irqreturn_t
dev_irq_handler(DRM_IRQ_ARGS
)
702 static void dev_irq_preinstall(struct drm_device
*dev
)
704 DBG("irq_preinstall: dev=%p", dev
);
707 static int dev_irq_postinstall(struct drm_device
*dev
)
709 DBG("irq_postinstall: dev=%p", dev
);
713 static void dev_irq_uninstall(struct drm_device
*dev
)
715 DBG("irq_uninstall: dev=%p", dev
);
718 static struct vm_operations_struct omap_gem_vm_ops
= {
719 .fault
= omap_gem_fault
,
720 .open
= drm_gem_vm_open
,
721 .close
= drm_gem_vm_close
,
724 static const struct file_operations omapdriver_fops
= {
725 .owner
= THIS_MODULE
,
727 .unlocked_ioctl
= drm_ioctl
,
728 .release
= drm_release
,
729 .mmap
= omap_gem_mmap
,
731 .fasync
= drm_fasync
,
733 .llseek
= noop_llseek
,
736 static struct drm_driver omap_drm_driver
= {
738 DRIVER_HAVE_IRQ
| DRIVER_MODESET
| DRIVER_GEM
,
740 .unload
= dev_unload
,
742 .firstopen
= dev_firstopen
,
743 .lastclose
= dev_lastclose
,
744 .preclose
= dev_preclose
,
745 .postclose
= dev_postclose
,
746 .get_vblank_counter
= drm_vblank_count
,
747 .enable_vblank
= dev_enable_vblank
,
748 .disable_vblank
= dev_disable_vblank
,
749 .irq_preinstall
= dev_irq_preinstall
,
750 .irq_postinstall
= dev_irq_postinstall
,
751 .irq_uninstall
= dev_irq_uninstall
,
752 .irq_handler
= dev_irq_handler
,
753 .reclaim_buffers
= drm_core_reclaim_buffers
,
754 #ifdef CONFIG_DEBUG_FS
755 .debugfs_init
= omap_debugfs_init
,
756 .debugfs_cleanup
= omap_debugfs_cleanup
,
758 .gem_init_object
= omap_gem_init_object
,
759 .gem_free_object
= omap_gem_free_object
,
760 .gem_vm_ops
= &omap_gem_vm_ops
,
761 .dumb_create
= omap_gem_dumb_create
,
762 .dumb_map_offset
= omap_gem_dumb_map_offset
,
763 .dumb_destroy
= omap_gem_dumb_destroy
,
765 .num_ioctls
= DRM_OMAP_NUM_IOCTLS
,
766 .fops
= &omapdriver_fops
,
770 .major
= DRIVER_MAJOR
,
771 .minor
= DRIVER_MINOR
,
772 .patchlevel
= DRIVER_PATCHLEVEL
,
775 static int pdev_suspend(struct platform_device
*pDevice
, pm_message_t state
)
781 static int pdev_resume(struct platform_device
*device
)
787 static void pdev_shutdown(struct platform_device
*device
)
792 static int pdev_probe(struct platform_device
*device
)
794 DBG("%s", device
->name
);
795 return drm_platform_init(&omap_drm_driver
, device
);
798 static int pdev_remove(struct platform_device
*device
)
801 drm_platform_exit(&omap_drm_driver
, device
);
805 struct platform_driver pdev
= {
808 .owner
= THIS_MODULE
,
811 .remove
= pdev_remove
,
812 .suspend
= pdev_suspend
,
813 .resume
= pdev_resume
,
814 .shutdown
= pdev_shutdown
,
817 static int __init
omap_drm_init(void)
820 return platform_driver_register(&pdev
);
823 static void __exit
omap_drm_fini(void)
826 platform_driver_unregister(&pdev
);
829 /* need late_initcall() so we load after dss_driver's are loaded */
830 late_initcall(omap_drm_init
);
831 module_exit(omap_drm_fini
);
833 MODULE_AUTHOR("Rob Clark <rob@ti.com>");
834 MODULE_DESCRIPTION("OMAP DRM Display Driver");
835 MODULE_ALIAS("platform:" DRIVER_NAME
);
836 MODULE_LICENSE("GPL v2");