drivers/staging/rtl8192u/r8192U_hw.h

   1 /*
   2         This is part of rtl8187 OpenSource driver.
   3         Copyright (C) Andrea Merello 2004-2005  <andreamrl@tiscali.it>
   4         Released under the terms of GPL (General Public Licence)
   5
   6         Parts of this driver are based on the GPL part of the
   7         official Realtek driver.
   8         Parts of this driver are based on the rtl8180 driver skeleton
   9         from Patric Schenke & Andres Salomon.
  10         Parts of this driver are based on the Intel Pro Wireless
  11         2100 GPL driver.
  12
  13         We want to tanks the Authors of those projects
  14         and the Ndiswrapper project Authors.
  15 */
  16
  17 /* Mariusz Matuszek added full registers definition with Realtek's name */
  18
  19 /* this file contains register definitions for the rtl8187 MAC controller */
  20 #ifndef R8192_HW
  21 #define R8192_HW
  22
  23 typedef enum _VERSION_819xU{
  24         VERSION_819xU_A, // A-cut
  25         VERSION_819xU_B, // B-cut
  26         VERSION_819xU_C,// C-cut
  27 }VERSION_819xU,*PVERSION_819xU;
  28 //added for different RF type
  29 typedef enum _RT_RF_TYPE_DEF
  30 {
  31         RF_1T2R = 0,
  32         RF_2T4R,
  33
  34         RF_819X_MAX_TYPE
  35 }RT_RF_TYPE_DEF;
  36
  37
  38 typedef enum _BaseBand_Config_Type{
  39         BaseBand_Config_PHY_REG = 0,                    //Radio Path A
  40         BaseBand_Config_AGC_TAB = 1,                    //Radio Path B
  41 }BaseBand_Config_Type, *PBaseBand_Config_Type;
  42 #define RTL8187_REQT_READ       0xc0
  43 #define RTL8187_REQT_WRITE      0x40
  44 #define RTL8187_REQ_GET_REGS    0x05
  45 #define RTL8187_REQ_SET_REGS    0x05
  46
  47 #define MAX_TX_URB 5
  48 #define MAX_RX_URB 16
  49
  50 #define R8180_MAX_RETRY 255
  51 //#define MAX_RX_NORMAL_URB 3
  52 //#define MAX_RX_COMMAND_URB 2
  53 #define RX_URB_SIZE 9100
  54
  55 #define BB_ANTATTEN_CHAN14      0x0c
  56 #define BB_ANTENNA_B 0x40
  57
  58 #define BB_HOST_BANG (1<<30)
  59 #define BB_HOST_BANG_EN (1<<2)
  60 #define BB_HOST_BANG_CLK (1<<1)
  61 #define BB_HOST_BANG_RW (1<<3)
  62 #define BB_HOST_BANG_DATA        1
  63
  64 //#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
  65 #define AFR                     0x010
  66 #define AFR_CardBEn             (1<<0)
  67 #define AFR_CLKRUN_SEL          (1<<1)
  68 #define AFR_FuncRegEn           (1<<2)
  69 #define RTL8190_EEPROM_ID       0x8129
  70 #define EEPROM_VID              0x02
  71 #define EEPROM_PID              0x04
  72 #define EEPROM_NODE_ADDRESS_BYTE_0      0x0C
  73
  74 #define EEPROM_TxPowerDiff      0x1F
  75 #define EEPROM_ThermalMeter     0x20
  76 #define EEPROM_PwDiff           0x21    //0x21
  77 #define EEPROM_CrystalCap       0x22    //0x22
  78
  79 #define EEPROM_TxPwIndex_CCK    0x23    //0x23
  80 #define EEPROM_TxPwIndex_OFDM_24G       0x24    //0x24~0x26
  81 #define EEPROM_TxPwIndex_CCK_V1         0x29    //0x29~0x2B
  82 #define EEPROM_TxPwIndex_OFDM_24G_V1    0x2C    //0x2C~0x2E
  83 #define EEPROM_TxPwIndex_Ver            0x27    //0x27
  84
  85 #define EEPROM_Default_TxPowerDiff              0x0
  86 #define EEPROM_Default_ThermalMeter             0x7
  87 #define EEPROM_Default_PwDiff                   0x4
  88 #define EEPROM_Default_CrystalCap               0x5
  89 #define EEPROM_Default_TxPower                  0x1010
  90 #define EEPROM_Customer_ID                      0x7B    //0x7B:CustomerID
  91 #define EEPROM_ChannelPlan                      0x16    //0x7C
  92 #define EEPROM_IC_VER                           0x7d    //0x7D
  93 #define EEPROM_CRC                              0x7e    //0x7E~0x7F
  94
  95 #define EEPROM_CID_DEFAULT                      0x0
  96 #define EEPROM_CID_CAMEO                                0x1
  97 #define EEPROM_CID_RUNTOP                               0x2
  98 #define EEPROM_CID_Senao                                0x3
  99 #define EEPROM_CID_TOSHIBA                              0x4     // Toshiba setting, Merge by Jacken, 2008/01/31
 100 #define EEPROM_CID_NetCore                              0x5
 101 #define EEPROM_CID_Nettronix                    0x6
 102 #define EEPROM_CID_Pronet                               0x7
 103 #define EEPROM_CID_DLINK                                0x8
 104
 105 #define AC_PARAM_TXOP_LIMIT_OFFSET      16
 106 #define AC_PARAM_ECW_MAX_OFFSET         12
 107 #define AC_PARAM_ECW_MIN_OFFSET         8
 108 #define AC_PARAM_AIFS_OFFSET            0
 109
 110 //#endif
 111 enum _RTL8192Usb_HW {
 112
 113         PCIF                    = 0x009, // PCI Function Register 0x0009h~0x000bh
 114 #define BB_GLOBAL_RESET_BIT     0x1
 115         BB_GLOBAL_RESET         = 0x020, // BasebandGlobal Reset Register
 116         BSSIDR                  = 0x02E, // BSSID Register
 117         CMDR                    = 0x037, // Command register
 118 #define CR_RST                  0x10
 119 #define CR_RE                   0x08
 120 #define CR_TE                   0x04
 121 #define CR_MulRW                0x01
 122         SIFS                    = 0x03E, // SIFS register
 123         TCR                     = 0x040, // Transmit Configuration Register
 124
 125 #define TCR_MXDMA_2048          7
 126 #define TCR_LRL_OFFSET          0
 127 #define TCR_SRL_OFFSET          8
 128 #define TCR_MXDMA_OFFSET        21
 129 #define TCR_SAT                 BIT24           // Enable Rate depedent ack timeout timer
 130         RCR                     = 0x044, // Receive Configuration Register
 131 #define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
 132                 (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
 133 #define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
 134 #define RX_FIFO_THRESHOLD_SHIFT 13
 135 #define RX_FIFO_THRESHOLD_128 3
 136 #define RX_FIFO_THRESHOLD_256 4
 137 #define RX_FIFO_THRESHOLD_512 5
 138 #define RX_FIFO_THRESHOLD_1024 6
 139 #define RX_FIFO_THRESHOLD_NONE 7
 140 #define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
 141 #define RCR_MXDMA_OFFSET        8
 142 #define RCR_FIFO_OFFSET         13
 143 #define RCR_ONLYERLPKT          BIT31                   // Early Receiving based on Packet Size.
 144 #define RCR_ENCS2               BIT30                   // Enable Carrier Sense Detection Method 2
 145 #define RCR_ENCS1               BIT29                   // Enable Carrier Sense Detection Method 1
 146 #define RCR_ENMBID              BIT27                   // Enable Multiple BssId.
 147 #define RCR_ACKTXBW             (BIT24|BIT25)           // TXBW Setting of ACK frames
 148 #define RCR_CBSSID              BIT23                   // Accept BSSID match packet
 149 #define RCR_APWRMGT             BIT22                   // Accept power management packet
 150 #define RCR_ADD3                BIT21                   // Accept address 3 match packet
 151 #define RCR_AMF                 BIT20                   // Accept management type frame
 152 #define RCR_ACF                 BIT19                   // Accept control type frame
 153 #define RCR_ADF                 BIT18                   // Accept data type frame
 154 #define RCR_RXFTH               BIT13                   // Rx FIFO Threshold
 155 #define RCR_AICV                BIT12                   // Accept ICV error packet
 156 #define RCR_ACRC32              BIT5                    // Accept CRC32 error packet
 157 #define RCR_AB                  BIT3                    // Accept broadcast packet
 158 #define RCR_AM                  BIT2                    // Accept multicast packet
 159 #define RCR_APM                 BIT1                    // Accept physical match packet
 160 #define RCR_AAP                 BIT0                    // Accept all unicast packet
 161         SLOT_TIME               = 0x049, // Slot Time Register
 162         ACK_TIMEOUT             = 0x04c, // Ack Timeout Register
 163         PIFS_TIME               = 0x04d, // PIFS time
 164         USTIME                  = 0x04e, // Microsecond Tuning Register, Sets the microsecond time unit used by MAC clock.
 165         EDCAPARA_BE             = 0x050, // EDCA Parameter of AC BE
 166         EDCAPARA_BK             = 0x054, // EDCA Parameter of AC BK
 167         EDCAPARA_VO             = 0x058, // EDCA Parameter of AC VO
 168         EDCAPARA_VI             = 0x05C, // EDCA Parameter of AC VI
 169         RFPC                    = 0x05F, // Rx FIFO Packet Count
 170         CWRR                    = 0x060, // Contention Window Report Register
 171         BCN_TCFG                = 0x062, // Beacon Time Configuration
 172 #define BCN_TCFG_CW_SHIFT               8
 173 #define BCN_TCFG_IFS                    0
 174         BCN_INTERVAL            = 0x070, // Beacon Interval (TU)
 175         ATIMWND                 = 0x072, // ATIM Window Size (TU)
 176         BCN_DRV_EARLY_INT       = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT
 177         BCN_DMATIME             = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA
 178         BCN_ERR_THRESH          = 0x078, // Beacon Error Threshold
 179         RWCAM                   = 0x0A0, //IN 8190 Data Sheet is called CAMcmd
 180         WCAMI                   = 0x0A4, // Software write CAM input content
 181         RCAMO                   = 0x0A8, // Software read/write CAM config
 182         SECR                    = 0x0B0, //Security Configuration Register
 183 #define SCR_TxUseDK             BIT0                    //Force Tx Use Default Key
 184 #define SCR_RxUseDK             BIT1                    //Force Rx Use Default Key
 185 #define SCR_TxEncEnable         BIT2                    //Enable Tx Encryption
 186 #define SCR_RxDecEnable         BIT3                    //Enable Rx Decryption
 187 #define SCR_SKByA2              BIT4                    //Search kEY BY A2
 188 #define SCR_NoSKMC              BIT5                    //No Key Search for Multicast
 189 #define SCR_UseDK               0x01
 190 #define SCR_TxSecEnable         0x02
 191 #define SCR_RxSecEnable         0x04
 192         TPPoll                  = 0x0fd, // Transmit priority polling register
 193         PSR                     = 0x0ff, // Page Select Register
 194 #define CPU_CCK_LOOPBACK        0x00030000
 195 #define CPU_GEN_SYSTEM_RESET    0x00000001
 196 #define CPU_GEN_FIRMWARE_RESET  0x00000008
 197 #define CPU_GEN_BOOT_RDY        0x00000010
 198 #define CPU_GEN_FIRM_RDY        0x00000020
 199 #define CPU_GEN_PUT_CODE_OK     0x00000080
 200 #define CPU_GEN_BB_RST          0x00000100
 201 #define CPU_GEN_PWR_STB_CPU     0x00000004
 202 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF              // Set bit18,17,16 to 0. Set bit19
 203 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000              // Set BIT19 to 1
 204
 205 //----------------------------------------------------------------------------
 206 //       8190 CPU General Register              (offset 0x100, 4 byte)
 207 //----------------------------------------------------------------------------
 208 #define CPU_CCK_LOOPBACK        0x00030000
 209 #define CPU_GEN_SYSTEM_RESET    0x00000001
 210 #define CPU_GEN_FIRMWARE_RESET  0x00000008
 211 #define CPU_GEN_BOOT_RDY        0x00000010
 212 #define CPU_GEN_FIRM_RDY        0x00000020
 213 #define CPU_GEN_PUT_CODE_OK     0x00000080
 214 #define CPU_GEN_BB_RST          0x00000100
 215 #define CPU_GEN_PWR_STB_CPU     0x00000004
 216 #define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19
 217 #define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1
 218         CPU_GEN                 = 0x100, // CPU Reset Register
 219         LED1Cfg                 =               0x154,// LED1 Configuration Register
 220         LED0Cfg                 =               0x155,// LED0 Configuration Register
 221
 222         AcmAvg                  = 0x170, // ACM Average Period Register
 223         AcmHwCtrl               = 0x171, // ACM Hardware Control Register
 224 //----------------------------------------------------------------------------
 225 ////
 226 ////       8190 AcmHwCtrl bits                                    (offset 0x171, 1 byte)
 227 ////----------------------------------------------------------------------------
 228 //
 229 #define AcmHw_HwEn              BIT0
 230 #define AcmHw_BeqEn             BIT1
 231 #define AcmHw_ViqEn             BIT2
 232 #define AcmHw_VoqEn             BIT3
 233 #define AcmHw_BeqStatus         BIT4
 234 #define AcmHw_ViqStatus         BIT5
 235 #define AcmHw_VoqStatus         BIT6
 236
 237         AcmFwCtrl               = 0x172, // ACM Firmware Control Register
 238         AES_11N_FIX             = 0x173,
 239         VOAdmTime               = 0x174, // VO Queue Admitted Time Register
 240         VIAdmTime               = 0x178, // VI Queue Admitted Time Register
 241         BEAdmTime               = 0x17C, // BE Queue Admitted Time Register
 242         RQPN1                   = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk
 243         RQPN2                   = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High
 244         RQPN3                   = 0x188, // Reserved Queue Page Number, Bcn, Public,
 245 //      QPRR                    = 0x1E0, // Queue Page Report per TID
 246         QPNR                    = 0x1D0, //0x1F0, // Queue Packet Number report per TID
 247         BQDA                    = 0x200, // Beacon Queue Descriptor Address
 248         HQDA                    = 0x204, // High Priority Queue Descriptor Address
 249         CQDA                    = 0x208, // Command Queue Descriptor Address
 250         MQDA                    = 0x20C, // Management Queue Descriptor Address
 251         HCCAQDA                 = 0x210, // HCCA Queue Descriptor Address
 252         VOQDA                   = 0x214, // VO Queue Descriptor Address
 253         VIQDA                   = 0x218, // VI Queue Descriptor Address
 254         BEQDA                   = 0x21C, // BE Queue Descriptor Address
 255         BKQDA                   = 0x220, // BK Queue Descriptor Address
 256         RCQDA                   = 0x224, // Receive command Queue Descriptor Address
 257         RDQDA                   = 0x228, // Receive Queue Descriptor Start Address
 258
 259         MAR0                    = 0x240, // Multicast filter.
 260         MAR4                    = 0x244,
 261
 262         CCX_PERIOD              = 0x250, // CCX Measurement Period Register, in unit of TU.
 263         CLM_RESULT              = 0x251, // CCA Busy fraction register.
 264         NHM_PERIOD              = 0x252, // NHM Measurement Period register, in unit of TU.
 265
 266         NHM_THRESHOLD0          = 0x253, // Noise Histogram Meashorement0.
 267         NHM_THRESHOLD1          = 0x254, // Noise Histogram Meashorement1.
 268         NHM_THRESHOLD2          = 0x255, // Noise Histogram Meashorement2.
 269         NHM_THRESHOLD3          = 0x256, // Noise Histogram Meashorement3.
 270         NHM_THRESHOLD4          = 0x257, // Noise Histogram Meashorement4.
 271         NHM_THRESHOLD5          = 0x258, // Noise Histogram Meashorement5.
 272         NHM_THRESHOLD6          = 0x259, // Noise Histogram Meashorement6
 273
 274         MCTRL                   = 0x25A, // Measurement Control
 275
 276         NHM_RPI_COUNTER0        = 0x264, // Noise Histogram RPI counter0, the fraction of signal strength < NHM_THRESHOLD0.
 277         NHM_RPI_COUNTER1        = 0x265, // Noise Histogram RPI counter1, the fraction of signal strength in (NHM_THRESHOLD0, NHM_THRESHOLD1].
 278         NHM_RPI_COUNTER2        = 0x266, // Noise Histogram RPI counter2, the fraction of signal strength in (NHM_THRESHOLD1, NHM_THRESHOLD2].
 279         NHM_RPI_COUNTER3        = 0x267, // Noise Histogram RPI counter3, the fraction of signal strength in (NHM_THRESHOLD2, NHM_THRESHOLD3].
 280         NHM_RPI_COUNTER4        = 0x268, // Noise Histogram RPI counter4, the fraction of signal strength in (NHM_THRESHOLD3, NHM_THRESHOLD4].
 281         NHM_RPI_COUNTER5        = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
 282         NHM_RPI_COUNTER6        = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
 283         NHM_RPI_COUNTER7        = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
 284 #define BW_OPMODE_11J                   BIT0
 285 #define BW_OPMODE_5G                    BIT1
 286 #define BW_OPMODE_20MHZ                 BIT2
 287         BW_OPMODE               = 0x300, // Bandwidth operation mode
 288         MSR                     = 0x303, // Media Status register
 289 #define MSR_LINK_MASK      ((1<<0)|(1<<1))
 290 #define MSR_LINK_MANAGED   2
 291 #define MSR_LINK_NONE      0
 292 #define MSR_LINK_SHIFT     0
 293 #define MSR_LINK_ADHOC     1
 294 #define MSR_LINK_MASTER    3
 295 #define MSR_LINK_ENEDCA    (1<<4)
 296         RETRY_LIMIT             = 0x304, // Retry Limit [15:8]-short, [7:0]-long
 297 #define RETRY_LIMIT_SHORT_SHIFT 8
 298 #define RETRY_LIMIT_LONG_SHIFT 0
 299         TSFR                    = 0x308,
 300         RRSR                    = 0x310, // Response Rate Set
 301 #define RRSR_RSC_OFFSET                 21
 302 #define RRSR_SHORT_OFFSET                       23
 303 #define RRSR_RSC_DUPLICATE                      0x600000
 304 #define RRSR_RSC_LOWSUBCHNL             0x400000
 305 #define RRSR_RSC_UPSUBCHANL             0x200000
 306 #define RRSR_SHORT                                      0x800000
 307 #define RRSR_1M                                         BIT0
 308 #define RRSR_2M                                         BIT1
 309 #define RRSR_5_5M                                       BIT2
 310 #define RRSR_11M                                        BIT3
 311 #define RRSR_6M                                         BIT4
 312 #define RRSR_9M                                         BIT5
 313 #define RRSR_12M                                        BIT6
 314 #define RRSR_18M                                        BIT7
 315 #define RRSR_24M                                        BIT8
 316 #define RRSR_36M                                        BIT9
 317 #define RRSR_48M                                        BIT10
 318 #define RRSR_54M                                        BIT11
 319 #define RRSR_MCS0                                       BIT12
 320 #define RRSR_MCS1                                       BIT13
 321 #define RRSR_MCS2                                       BIT14
 322 #define RRSR_MCS3                                       BIT15
 323 #define RRSR_MCS4                                       BIT16
 324 #define RRSR_MCS5                                       BIT17
 325 #define RRSR_MCS6                                       BIT18
 326 #define RRSR_MCS7                                       BIT19
 327 #define BRSR_AckShortPmb                        BIT23           // CCK ACK: use Short Preamble or not.
 328         RATR0                   = 0x320, // Rate Adaptive Table register1
 329         UFWP                    = 0x318,
 330         DRIVER_RSSI             = 0x32c,                                        // Driver tell Firmware current RSSI
 331 //----------------------------------------------------------------------------
 332 //       8190 Rate Adaptive Table Register      (offset 0x320, 4 byte)
 333 //----------------------------------------------------------------------------
 334 //CCK
 335 #define RATR_1M                 0x00000001
 336 #define RATR_2M                 0x00000002
 337 #define RATR_55M                0x00000004
 338 #define RATR_11M                0x00000008
 339 //OFDM
 340 #define RATR_6M                 0x00000010
 341 #define RATR_9M                 0x00000020
 342 #define RATR_12M                0x00000040
 343 #define RATR_18M                0x00000080
 344 #define RATR_24M                0x00000100
 345 #define RATR_36M                0x00000200
 346 #define RATR_48M                0x00000400
 347 #define RATR_54M                0x00000800
 348 //MCS 1 Spatial Stream
 349 #define RATR_MCS0               0x00001000
 350 #define RATR_MCS1               0x00002000
 351 #define RATR_MCS2               0x00004000
 352 #define RATR_MCS3               0x00008000
 353 #define RATR_MCS4               0x00010000
 354 #define RATR_MCS5               0x00020000
 355 #define RATR_MCS6               0x00040000
 356 #define RATR_MCS7               0x00080000
 357 //MCS 2 Spatial Stream
 358 #define RATR_MCS8               0x00100000
 359 #define RATR_MCS9               0x00200000
 360 #define RATR_MCS10              0x00400000
 361 #define RATR_MCS11              0x00800000
 362 #define RATR_MCS12              0x01000000
 363 #define RATR_MCS13              0x02000000
 364 #define RATR_MCS14              0x04000000
 365 #define RATR_MCS15              0x08000000
 366 // ALL CCK Rate
 367 #define RATE_ALL_CCK            RATR_1M|RATR_2M|RATR_55M|RATR_11M
 368 #define RATE_ALL_OFDM_AG        RATR_6M|RATR_9M|RATR_12M|RATR_18M|RATR_24M\
 369                                                         |RATR_36M|RATR_48M|RATR_54M
 370 #define RATE_ALL_OFDM_1SS       RATR_MCS0|RATR_MCS1|RATR_MCS2|RATR_MCS3 | \
 371                                                         RATR_MCS4|RATR_MCS5|RATR_MCS6|RATR_MCS7
 372 #define RATE_ALL_OFDM_2SS       RATR_MCS8|RATR_MCS9     |RATR_MCS10|RATR_MCS11| \
 373                                                         RATR_MCS12|RATR_MCS13|RATR_MCS14|RATR_MCS15
 374
 375         MCS_TXAGC               = 0x340, // MCS AGC
 376         CCK_TXAGC               = 0x348, // CCK AGC
 377 //      ISR                     = 0x350, // Interrupt Status Register
 378 //      IMR                     = 0x354, // Interrupt Mask Register
 379 //      IMR_POLL                = 0x360,
 380         MacBlkCtrl              = 0x403, // Mac block on/off control register
 381
 382         EPROM_CMD               = 0xfe58,
 383 #define Cmd9346CR_9356SEL       (1<<4)
 384 #define EPROM_CMD_RESERVED_MASK (1<<5)
 385 #define EPROM_CMD_OPERATING_MODE_SHIFT 6
 386 #define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
 387 #define EPROM_CMD_CONFIG 0x3
 388 #define EPROM_CMD_NORMAL 0
 389 #define EPROM_CMD_LOAD 1
 390 #define EPROM_CMD_PROGRAM 2
 391 #define EPROM_CS_SHIFT 3
 392 #define EPROM_CK_SHIFT 2
 393 #define EPROM_W_SHIFT 1
 394 #define EPROM_R_SHIFT 0
 395         MAC0                    = 0x000,
 396         MAC1                    = 0x001,
 397         MAC2                    = 0x002,
 398         MAC3                    = 0x003,
 399         MAC4                    = 0x004,
 400         MAC5                    = 0x005,
 401
 402 };
 403 //----------------------------------------------------------------------------
 404 //       818xB AnaParm & AnaParm2 Register
 405 //----------------------------------------------------------------------------
 406 //#define ANAPARM_ASIC_ON    0x45090658
 407 //#define ANAPARM2_ASIC_ON   0x727f3f52
 408 #define GPI 0x108
 409 #define GPO 0x109
 410 #define GPE 0x10a
 411 #endif