drivers/staging/rtl8712/rtl871x_cmd.h

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * Modifications for inclusion into the Linux staging tree are
  19  * Copyright(c) 2010 Larry Finger. All rights reserved.
  20  *
  21  * Contact information:
  22  * WLAN FAE <wlanfae@realtek.com>
  23  * Larry Finger <Larry.Finger@lwfinger.net>
  24  *
  25  ******************************************************************************/
  26 #ifndef __RTL871X_CMD_H_
  27 #define __RTL871X_CMD_H_
  28
  29 #include "wlan_bssdef.h"
  30 #include "rtl871x_rf.h"
  31 #define C2H_MEM_SZ (16*1024)
  32
  33 #include "osdep_service.h"
  34 #include "ieee80211.h"
  35
  36 #define FREE_CMDOBJ_SZ  128
  37 #define MAX_CMDSZ       512
  38 #define MAX_RSPSZ       512
  39 #define MAX_EVTSZ       1024
  40 #define CMDBUFF_ALIGN_SZ 512
  41
  42 struct cmd_obj {
  43         u16     cmdcode;
  44         u8      res;
  45         u8      *parmbuf;
  46         u32     cmdsz;
  47         u8      *rsp;
  48         u32     rspsz;
  49         struct list_head list;
  50 };
  51
  52 struct cmd_priv {
  53         struct semaphore cmd_queue_sema;
  54         struct semaphore terminate_cmdthread_sema;
  55         struct  __queue cmd_queue;
  56         u8 cmd_seq;
  57         u8 *cmd_buf;    /*shall be non-paged, and 4 bytes aligned*/
  58         u8 *cmd_allocated_buf;
  59         u8 *rsp_buf;    /*shall be non-paged, and 4 bytes aligned*/
  60         u8 *rsp_allocated_buf;
  61         u32 cmd_issued_cnt;
  62         u32 cmd_done_cnt;
  63         u32 rsp_cnt;
  64         struct _adapter *padapter;
  65 };
  66
  67 struct evt_obj {
  68         u16 evtcode;
  69         u8 res;
  70         u8 *parmbuf;
  71         u32 evtsz;
  72         struct list_head list;
  73 };
  74
  75 struct  evt_priv {
  76         struct  __queue evt_queue;
  77         u8      event_seq;
  78         u8      *evt_buf;       /*shall be non-paged, and 4 bytes aligned*/
  79         u8      *evt_allocated_buf;
  80         u32     evt_done_cnt;
  81         struct tasklet_struct event_tasklet;
  82 };
  83
  84 #define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
  85 do {\
  86         _init_listhead(&pcmd->list);\
  87         pcmd->cmdcode = code;\
  88         pcmd->parmbuf = (u8 *)(pparm);\
  89         pcmd->cmdsz = sizeof(*pparm);\
  90         pcmd->rsp = NULL;\
  91         pcmd->rspsz = 0;\
  92 } while (0)
  93
  94 u32 r8712_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
  95 u32 r8712_enqueue_cmd_ex(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
  96 struct cmd_obj *r8712_dequeue_cmd(struct  __queue *queue);
  97 void r8712_free_cmd_obj(struct cmd_obj *pcmd);
  98 int r8712_cmd_thread(void *context);
  99 u32 r8712_init_cmd_priv(struct cmd_priv *pcmdpriv);
 100 void r8712_free_cmd_priv(struct cmd_priv *pcmdpriv);
 101 u32 r8712_init_evt_priv(struct evt_priv *pevtpriv);
 102 void r8712_free_evt_priv(struct evt_priv *pevtpriv);
 103
 104 enum rtl871x_drvint_cid {
 105         NONE_WK_CID,
 106         WDG_WK_CID,
 107         MAX_WK_CID
 108 };
 109
 110 enum RFINTFS {
 111         SWSI,
 112         HWSI,
 113         HWPI,
 114 };
 115
 116 /*
 117  * Caller Mode: Infra, Ad-HoC(C)
 118  * Notes: To enter USB suspend mode
 119  * Command Mode
 120  */
 121 struct usb_suspend_parm {
 122         u32 action; /* 1: sleep, 0:resume */
 123 };
 124
 125 /*
 126  * Caller Mode: Infra, Ad-Hoc
 127  * Notes: To join the specified bss
 128  * Command Event Mode
 129  */
 130 struct joinbss_parm {
 131         struct ndis_wlan_bssid_ex network;
 132 };
 133
 134 /*
 135  * Caller Mode: Infra, Ad-HoC(C)
 136  * Notes: To disconnect the current associated BSS
 137  * Command Mode
 138  */
 139 struct disconnect_parm {
 140         u32 rsvd;
 141 };
 142
 143 /*
 144  * Caller Mode: AP, Ad-HoC(M)
 145  * Notes: To create a BSS
 146  * Command Mode
 147  */
 148 struct createbss_parm {
 149         struct ndis_wlan_bssid_ex network;
 150 };
 151
 152 /*
 153  * Caller Mode: AP, Ad-HoC, Infra
 154  * Notes: To set the NIC mode of RTL8711
 155  * Command Mode
 156  * The definition of mode:
 157  *
 158  * #define IW_MODE_AUTO 0       // Let the driver decides which AP to join
 159  * #define IW_MODE_ADHOC        1       // Single cell network (Ad-Hoc Clients)
 160  * #define IW_MODE_INFRA        2       // Multi cell network, roaming, ..
 161  * #define IW_MODE_MASTER       3       // Synchronisation master or AP
 162  * #define IW_MODE_REPEAT       4       // Wireless Repeater (forwarder)
 163  * #define IW_MODE_SECOND       5       // Secondary master/repeater (backup)
 164  * #define IW_MODE_MONITOR      6       // Passive monitor (listen only)
 165 */
 166 struct  setopmode_parm {
 167         u8      mode;
 168         u8      rsvd[3];
 169 };
 170
 171 /*
 172  * Caller Mode: AP, Ad-HoC, Infra
 173  * Notes: To ask RTL8711 performing site-survey
 174  * Command-Event Mode
 175  */
 176 struct sitesurvey_parm {
 177         sint passive_mode;      /*active: 1, passive: 0 */
 178         sint bsslimit;  /* 1 ~ 48 */
 179         sint    ss_ssidlen;
 180         u8      ss_ssid[IW_ESSID_MAX_SIZE + 1];
 181 };
 182
 183 /*
 184  * Caller Mode: Any
 185  * Notes: To set the auth type of RTL8711. open/shared/802.1x
 186  * Command Mode
 187  */
 188 struct setauth_parm {
 189         u8 mode;  /*0: legacy open, 1: legacy shared 2: 802.1x*/
 190         u8 _1x;   /*0: PSK, 1: TLS*/
 191         u8 rsvd[2];
 192 };
 193
 194 /*
 195  * Caller Mode: Infra
 196  * a. algorithm: wep40, wep104, tkip & aes
 197  * b. keytype: grp key/unicast key
 198  * c. key contents
 199  *
 200  * when shared key ==> keyid is the camid
 201  * when 802.1x ==> keyid [0:1] ==> grp key
 202  * when 802.1x ==> keyid > 2 ==> unicast key
 203  */
 204 struct setkey_parm {
 205         u8      algorithm;      /* encryption algorithm, could be none, wep40,
 206                                  * TKIP, CCMP, wep104 */
 207         u8      keyid;
 208         u8      grpkey;         /* 1: this is the grpkey for 802.1x.
 209                                  * 0: this is the unicast key for 802.1x */
 210         u8      key[16];        /* this could be 40 or 104 */
 211 };
 212
 213 /*
 214  * When in AP or Ad-Hoc mode, this is used to
 215  * allocate an sw/hw entry for a newly associated sta.
 216  * Command
 217  * when shared key ==> algorithm/keyid
 218  */
 219 struct set_stakey_parm {
 220         u8      addr[ETH_ALEN];
 221         u8      algorithm;
 222         u8      key[16];
 223 };
 224
 225 struct set_stakey_rsp {
 226         u8      addr[ETH_ALEN];
 227         u8      keyid;
 228         u8      rsvd;
 229 };
 230
 231 struct SetMacAddr_param {
 232         u8      MacAddr[ETH_ALEN];
 233 };
 234
 235 /*
 236 Caller Ad-Hoc/AP
 237
 238 Command -Rsp(AID == CAMID) mode
 239
 240 This is to force fw to add an sta_data entry per driver's request.
 241
 242 FW will write an cam entry associated with it.
 243
 244 */
 245 struct set_assocsta_parm {
 246         u8      addr[ETH_ALEN];
 247 };
 248
 249 struct set_assocsta_rsp {
 250         u8      cam_id;
 251         u8      rsvd[3];
 252 };
 253
 254 /*
 255         Caller Ad-Hoc/AP
 256
 257         Command mode
 258
 259         This is to force fw to del an sta_data entry per driver's request
 260
 261         FW will invalidate the cam entry associated with it.
 262
 263 */
 264 struct del_assocsta_parm {
 265         u8      addr[ETH_ALEN];
 266 };
 267
 268 /*
 269 Caller Mode: AP/Ad-HoC(M)
 270
 271 Notes: To notify fw that given staid has changed its power state
 272
 273 Command Mode
 274
 275 */
 276 struct setstapwrstate_parm {
 277         u8      staid;
 278         u8      status;
 279         u8      hwaddr[6];
 280 };
 281
 282 /*
 283 Caller Mode: Any
 284
 285 Notes: To setup the basic rate of RTL8711
 286
 287 Command Mode
 288
 289 */
 290 struct  setbasicrate_parm {
 291         u8      basicrates[NumRates];
 292 };
 293
 294 /*
 295 Caller Mode: Any
 296
 297 Notes: To read the current basic rate
 298
 299 Command-Rsp Mode
 300
 301 */
 302 struct getbasicrate_parm {
 303         u32 rsvd;
 304 };
 305
 306 struct getbasicrate_rsp {
 307         u8 basicrates[NumRates];
 308 };
 309
 310 /*
 311 Caller Mode: Any
 312
 313 Notes: To setup the data rate of RTL8711
 314
 315 Command Mode
 316
 317 */
 318 struct setdatarate_parm {
 319         u8      mac_id;
 320         u8      datarates[NumRates];
 321 };
 322
 323 enum _RT_CHANNEL_DOMAIN {
 324         RT_CHANNEL_DOMAIN_FCC = 0,
 325         RT_CHANNEL_DOMAIN_IC = 1,
 326         RT_CHANNEL_DOMAIN_ETSI = 2,
 327         RT_CHANNEL_DOMAIN_SPAIN = 3,
 328         RT_CHANNEL_DOMAIN_FRANCE = 4,
 329         RT_CHANNEL_DOMAIN_MKK = 5,
 330         RT_CHANNEL_DOMAIN_MKK1 = 6,
 331         RT_CHANNEL_DOMAIN_ISRAEL = 7,
 332         RT_CHANNEL_DOMAIN_TELEC = 8,
 333
 334         /* Be compatible with old channel plan. No good! */
 335         RT_CHANNEL_DOMAIN_MIC = 9,
 336         RT_CHANNEL_DOMAIN_GLOBAL_DOAMIN = 10,
 337         RT_CHANNEL_DOMAIN_WORLD_WIDE_13 = 11,
 338         RT_CHANNEL_DOMAIN_TELEC_NETGEAR = 12,
 339
 340         RT_CHANNEL_DOMAIN_NCC = 13,
 341         RT_CHANNEL_DOMAIN_5G = 14,
 342         RT_CHANNEL_DOMAIN_5G_40M = 15,
 343  /*===== Add new channel plan above this line===============*/
 344         RT_CHANNEL_DOMAIN_MAX,
 345 };
 346
 347
 348 struct SetChannelPlan_param {
 349         enum _RT_CHANNEL_DOMAIN ChannelPlan;
 350 };
 351
 352 /*
 353 Caller Mode: Any
 354
 355 Notes: To read the current data rate
 356
 357 Command-Rsp Mode
 358
 359 */
 360 struct getdatarate_parm {
 361         u32 rsvd;
 362
 363 };
 364 struct getdatarate_rsp {
 365         u8 datarates[NumRates];
 366 };
 367
 368
 369 /*
 370 Caller Mode: Any
 371 AP: AP can use the info for the contents of beacon frame
 372 Infra: STA can use the info when sitesurveying
 373 Ad-HoC(M): Like AP
 374 Ad-HoC(C): Like STA
 375
 376
 377 Notes: To set the phy capability of the NIC
 378
 379 Command Mode
 380
 381 */
 382
 383 /*
 384 Caller Mode: Any
 385
 386 Notes: To set the channel/modem/band
 387 This command will be used when channel/modem/band is changed.
 388
 389 Command Mode
 390
 391 */
 392 /*
 393 Caller Mode: Any
 394
 395 Notes: To get the current setting of channel/modem/band
 396
 397 Command-Rsp Mode
 398
 399 */
 400 struct  getphy_rsp {
 401         u8      rfchannel;
 402         u8      modem;
 403 };
 404
 405 struct readBB_parm {
 406         u8      offset;
 407 };
 408 struct readBB_rsp {
 409         u8      value;
 410 };
 411
 412 struct readTSSI_parm {
 413         u8      offset;
 414 };
 415 struct readTSSI_rsp {
 416         u8      value;
 417 };
 418
 419 struct writeBB_parm {
 420         u8      offset;
 421         u8      value;
 422 };
 423
 424 struct writePTM_parm {
 425         u8      type;
 426 };
 427
 428 struct readRF_parm {
 429         u8      offset;
 430 };
 431 struct readRF_rsp {
 432         u32     value;
 433 };
 434
 435 struct writeRF_parm {
 436         u32     offset;
 437         u32     value;
 438 };
 439
 440 struct setrfintfs_parm {
 441         u8      rfintfs;
 442 };
 443
 444 struct getrfintfs_parm {
 445         u8      rfintfs;
 446 };
 447
 448 /*
 449         Notes: This command is used for H2C/C2H loopback testing
 450
 451         mac[0] == 0
 452         ==> CMD mode, return H2C_SUCCESS.
 453         The following condition must be ture under CMD mode
 454                 mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
 455                 s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
 456                 s2 == (b1 << 8 | b0);
 457
 458         mac[0] == 1
 459         ==> CMD_RSP mode, return H2C_SUCCESS_RSP
 460
 461         The rsp layout shall be:
 462         rsp:                    parm:
 463                 mac[0]  =   mac[5];
 464                 mac[1]  =   mac[4];
 465                 mac[2]  =   mac[3];
 466                 mac[3]  =   mac[2];
 467                 mac[4]  =   mac[1];
 468                 mac[5]  =   mac[0];
 469                 s0              =   s1;
 470                 s1              =   swap16(s0);
 471                 w0              =       swap32(w1);
 472                 b0              =       b1
 473                 s2              =       s0 + s1
 474                 b1              =       b0
 475                 w1              =       w0
 476
 477         mac[0] ==       2
 478         ==> CMD_EVENT mode, return      H2C_SUCCESS
 479         The event layout shall be:
 480         event:       parm:
 481         mac[0]  =   mac[5];
 482         mac[1]  =   mac[4];
 483         mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
 484         mac[3]  =   mac[2];
 485         mac[4]  =   mac[1];
 486         mac[5]  =   mac[0];
 487         s0              =   swap16(s0) - event.mac[2];
 488         s1              =   s1 + event.mac[2];
 489         w0              =       swap32(w0);
 490         b0              =       b1
 491         s2              =       s0 + event.mac[2]
 492         b1              =       b0
 493         w1              =       swap32(w1) - event.mac[2];
 494
 495         parm->mac[3] is the total event counts that host requested.
 496
 497
 498         event will be the same with the cmd's param.
 499
 500 */
 501
 502 /* CMD param Formart for DRV INTERNAL CMD HDL*/
 503 struct drvint_cmd_parm {
 504         int i_cid; /*internal cmd id*/
 505         int sz; /* buf sz*/
 506         unsigned char *pbuf;
 507 };
 508
 509 /*------------------- Below are used for RF/BB tunning ---------------------*/
 510
 511 struct  setantenna_parm {
 512         u8      tx_antset;
 513         u8      rx_antset;
 514         u8      tx_antenna;
 515         u8      rx_antenna;
 516 };
 517
 518 struct  enrateadaptive_parm {
 519         u32     en;
 520 };
 521
 522 struct settxagctbl_parm {
 523         u32     txagc[MAX_RATES_LENGTH];
 524 };
 525
 526 struct gettxagctbl_parm {
 527         u32 rsvd;
 528 };
 529 struct gettxagctbl_rsp {
 530         u32     txagc[MAX_RATES_LENGTH];
 531 };
 532
 533 struct setagcctrl_parm {
 534         u32     agcctrl;        /* 0: pure hw, 1: fw */
 535 };
 536
 537 struct setssup_parm     {
 538         u32     ss_ForceUp[MAX_RATES_LENGTH];
 539 };
 540
 541 struct getssup_parm     {
 542         u32 rsvd;
 543 };
 544 struct getssup_rsp      {
 545         u8      ss_ForceUp[MAX_RATES_LENGTH];
 546 };
 547
 548 struct setssdlevel_parm {
 549         u8      ss_DLevel[MAX_RATES_LENGTH];
 550 };
 551
 552 struct getssdlevel_parm {
 553         u32 rsvd;
 554 };
 555 struct getssdlevel_rsp  {
 556         u8      ss_DLevel[MAX_RATES_LENGTH];
 557 };
 558
 559 struct setssulevel_parm {
 560         u8      ss_ULevel[MAX_RATES_LENGTH];
 561 };
 562
 563 struct getssulevel_parm {
 564         u32 rsvd;
 565 };
 566 struct getssulevel_rsp  {
 567         u8      ss_ULevel[MAX_RATES_LENGTH];
 568 };
 569
 570 struct  setcountjudge_parm {
 571         u8      count_judge[MAX_RATES_LENGTH];
 572 };
 573
 574 struct  getcountjudge_parm {
 575         u32 rsvd;
 576 };
 577
 578 struct  getcountjudge_rsp {
 579         u8      count_judge[MAX_RATES_LENGTH];
 580 };
 581
 582 struct setpwrmode_parm  {
 583         u8      mode;
 584         u8      flag_low_traffic_en;
 585         u8      flag_lpnav_en;
 586         u8      flag_rf_low_snr_en;
 587         u8      flag_dps_en; /* 1: dps, 0: 32k */
 588         u8      bcn_rx_en;
 589         u8      bcn_pass_cnt;     /* fw report one beacon information to
 590                                    * driver  when it receives bcn_pass_cnt
 591                                    *  beacons. */
 592         u8      bcn_to;           /* beacon TO (ms). ¡§=0¡¨ no limit.*/
 593         u16     bcn_itv;
 594         u8      app_itv; /* only for VOIP mode. */
 595         u8      awake_bcn_itv;
 596         u8      smart_ps;
 597         u8      bcn_pass_time;  /* unit: 100ms */
 598 };
 599
 600 struct setatim_parm {
 601         u8 op;   /*0: add, 1:del*/
 602         u8 txid; /* id of dest station.*/
 603 };
 604
 605 struct setratable_parm {
 606         u8 ss_ForceUp[NumRates];
 607         u8 ss_ULevel[NumRates];
 608         u8 ss_DLevel[NumRates];
 609         u8 count_judge[NumRates];
 610 };
 611
 612 struct getratable_parm {
 613         uint rsvd;
 614 };
 615 struct getratable_rsp {
 616         u8 ss_ForceUp[NumRates];
 617         u8 ss_ULevel[NumRates];
 618         u8 ss_DLevel[NumRates];
 619         u8 count_judge[NumRates];
 620 };
 621
 622 /*to get TX,RX retry count*/
 623 struct gettxretrycnt_parm {
 624         unsigned int rsvd;
 625 };
 626
 627 struct gettxretrycnt_rsp {
 628         unsigned long tx_retrycnt;
 629 };
 630
 631 struct getrxretrycnt_parm {
 632         unsigned int rsvd;
 633 };
 634
 635 struct getrxretrycnt_rsp {
 636         unsigned long rx_retrycnt;
 637 };
 638
 639 /*to get BCNOK,BCNERR count*/
 640 struct getbcnokcnt_parm {
 641         unsigned int rsvd;
 642 };
 643
 644 struct getbcnokcnt_rsp {
 645         unsigned long bcnokcnt;
 646 };
 647
 648 struct getbcnerrcnt_parm {
 649         unsigned int rsvd;
 650 };
 651 struct getbcnerrcnt_rsp {
 652         unsigned long bcnerrcnt;
 653 };
 654
 655 /* to get current TX power level*/
 656 struct getcurtxpwrlevel_parm {
 657         unsigned int rsvd;
 658 };
 659
 660 struct getcurtxpwrlevel_rsp {
 661         unsigned short tx_power;
 662 };
 663
 664 /*dynamic on/off DIG*/
 665 struct setdig_parm {
 666         unsigned char dig_on;   /* 1:on , 0:off */
 667 };
 668
 669 /*dynamic on/off RA*/
 670 struct setra_parm {
 671         unsigned char ra_on;    /* 1:on , 0:off */
 672 };
 673
 674 struct setprobereqextraie_parm {
 675         unsigned char e_id;
 676         unsigned char ie_len;
 677         unsigned char ie[0];
 678 };
 679
 680 struct setassocreqextraie_parm {
 681         unsigned char e_id;
 682         unsigned char ie_len;
 683         unsigned char ie[0];
 684 };
 685
 686 struct setproberspextraie_parm {
 687         unsigned char e_id;
 688         unsigned char ie_len;
 689         unsigned char ie[0];
 690 };
 691
 692 struct setassocrspextraie_parm {
 693         unsigned char e_id;
 694         unsigned char ie_len;
 695         unsigned char ie[0];
 696 };
 697
 698 struct addBaReq_parm {
 699         unsigned int tid;
 700 };
 701
 702 /*H2C Handler index: 46 */
 703 struct SetChannel_parm {
 704         u32 curr_ch;
 705 };
 706
 707 /*H2C Handler index: 61 */
 708 struct DisconnectCtrlEx_param {
 709         /* MAXTIME = (2 * FirstStageTO) + (TryPktCnt * TryPktInterval) */
 710         unsigned char EnableDrvCtrl;
 711         unsigned char TryPktCnt;
 712         unsigned char TryPktInterval; /* Unit: ms */
 713         unsigned char rsvd;
 714         unsigned int  FirstStageTO; /* Unit: ms */
 715 };
 716
 717 #define GEN_CMD_CODE(cmd)       cmd ## _CMD_
 718
 719 /*
 720  * Result:
 721  * 0x00: success
 722  * 0x01: success, and check Response.
 723  * 0x02: cmd ignored due to duplicated sequcne number
 724  * 0x03: cmd dropped due to invalid cmd code
 725  * 0x04: reserved.
 726  */
 727
 728 #define H2C_RSP_OFFSET                  512
 729 #define H2C_SUCCESS                     0x00
 730 #define H2C_SUCCESS_RSP                 0x01
 731 #define H2C_DUPLICATED                  0x02
 732 #define H2C_DROPPED                     0x03
 733 #define H2C_PARAMETERS_ERROR            0x04
 734 #define H2C_REJECTED                    0x05
 735 #define H2C_CMD_OVERFLOW                0x06
 736 #define H2C_RESERVED                    0x07
 737
 738 u8 r8712_setMacAddr_cmd(struct _adapter *padapter, u8 *mac_addr);
 739 u8 r8712_setassocsta_cmd(struct _adapter *padapter, u8 *mac_addr);
 740 u8 r8712_sitesurvey_cmd(struct _adapter *padapter,
 741                         struct ndis_802_11_ssid *pssid);
 742 u8 r8712_createbss_cmd(struct _adapter *padapter);
 743 u8 r8712_setstakey_cmd(struct _adapter *padapter, u8 *psta, u8 unicast_key);
 744 u8 r8712_joinbss_cmd(struct _adapter *padapter,
 745                      struct wlan_network *pnetwork);
 746 u8 r8712_disassoc_cmd(struct _adapter *padapter);
 747 u8 r8712_setopmode_cmd(struct _adapter *padapter,
 748                  enum NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
 749 u8 r8712_setdatarate_cmd(struct _adapter *padapter, u8 *rateset);
 750 u8 r8712_set_chplan_cmd(struct _adapter  *padapter, int chplan);
 751 u8 r8712_setbasicrate_cmd(struct _adapter *padapter, u8 *rateset);
 752 u8 r8712_getrfreg_cmd(struct _adapter *padapter, u8 offset, u8 * pval);
 753 u8 r8712_setrfintfs_cmd(struct _adapter *padapter, u8 mode);
 754 u8 r8712_setrfreg_cmd(struct _adapter  *padapter, u8 offset, u32 val);
 755 u8 r8712_setrttbl_cmd(struct _adapter  *padapter,
 756                       struct setratable_parm *prate_table);
 757 u8 r8712_gettssi_cmd(struct _adapter  *padapter, u8 offset, u8 *pval);
 758 u8 r8712_setptm_cmd(struct _adapter *padapter, u8 type);
 759 u8 r8712_setfwdig_cmd(struct _adapter *padapter, u8 type);
 760 u8 r8712_setfwra_cmd(struct _adapter *padapter, u8 type);
 761 u8 r8712_addbareq_cmd(struct _adapter *padapter, u8 tid);
 762 u8 r8712_wdg_wk_cmd(struct _adapter *padapter);
 763 void r8712_survey_cmd_callback(struct _adapter  *padapter,
 764                                struct cmd_obj *pcmd);
 765 void r8712_disassoc_cmd_callback(struct _adapter  *padapter,
 766                                  struct cmd_obj *pcmd);
 767 void r8712_joinbss_cmd_callback(struct _adapter  *padapter,
 768                                 struct cmd_obj *pcmd);
 769 void r8712_createbss_cmd_callback(struct _adapter *padapter,
 770                                   struct cmd_obj *pcmd);
 771 void r8712_getbbrfreg_cmdrsp_callback(struct _adapter *padapter,
 772                                       struct cmd_obj *pcmd);
 773 void r8712_readtssi_cmdrsp_callback(struct _adapter *padapter,
 774                                 struct cmd_obj *pcmd);
 775 void r8712_setstaKey_cmdrsp_callback(struct _adapter  *padapter,
 776                                      struct cmd_obj *pcmd);
 777 void r8712_setassocsta_cmdrsp_callback(struct _adapter  *padapter,
 778                                        struct cmd_obj *pcmd);
 779 u8 r8712_disconnectCtrlEx_cmd(struct _adapter *adapter, u32 enableDrvCtrl,
 780                         u32 tryPktCnt, u32 tryPktInterval, u32 firstStageTO);
 781
 782 struct _cmd_callback {
 783         u32     cmd_code;
 784         void (*callback)(struct _adapter  *padapter, struct cmd_obj *cmd);
 785 };
 786
 787 #include "rtl8712_cmd.h"
 788
 789 #endif /* _CMD_H_ */
 790