i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / staging / rts5139 / ms.h
blobf9d46d210f23bbebc9738cae0146a7304496f040
1 /* Driver for Realtek RTS51xx USB card reader
2 * Header file
4 * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2, or (at your option) any
9 * later version.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License along
17 * with this program; if not, see <http://www.gnu.org/licenses/>.
19 * Author:
20 * wwang (wei_wang@realsil.com.cn)
21 * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
22 * Maintainer:
23 * Edwin Rong (edwin_rong@realsil.com.cn)
24 * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China
27 #ifndef __RTS51X_MS_H
28 #define __RTS51X_MS_H
30 #include "rts51x_chip.h"
32 #define MS_MAX_RETRY_COUNT 3
34 #define MS_EXTRA_SIZE 0x9
36 #define WRT_PRTCT 0x01
38 /* Error Code */
39 #define MS_NO_ERROR 0x00
40 #define MS_CRC16_ERROR 0x80
41 #define MS_TO_ERROR 0x40
42 #define MS_NO_CARD 0x20
43 #define MS_NO_MEMORY 0x10
44 #define MS_CMD_NK 0x08
45 #define MS_FLASH_READ_ERROR 0x04
46 #define MS_FLASH_WRITE_ERROR 0x02
47 #define MS_BREQ_ERROR 0x01
48 #define MS_NOT_FOUND 0x03
50 /* Transfer Protocol Command */
51 #define READ_PAGE_DATA 0x02
52 #define READ_REG 0x04
53 #define GET_INT 0x07
54 #define WRITE_PAGE_DATA 0x0D
55 #define WRITE_REG 0x0B
56 #define SET_RW_REG_ADRS 0x08
57 #define SET_CMD 0x0E
59 #define PRO_READ_LONG_DATA 0x02
60 #define PRO_READ_SHORT_DATA 0x03
61 #define PRO_READ_REG 0x04
62 #define PRO_READ_QUAD_DATA 0x05
63 #define PRO_GET_INT 0x07
64 #define PRO_WRITE_LONG_DATA 0x0D
65 #define PRO_WRITE_SHORT_DATA 0x0C
66 #define PRO_WRITE_QUAD_DATA 0x0A
67 #define PRO_WRITE_REG 0x0B
68 #define PRO_SET_RW_REG_ADRS 0x08
69 #define PRO_SET_CMD 0x0E
70 #define PRO_EX_SET_CMD 0x09
72 #ifdef SUPPORT_MAGIC_GATE
73 #define MG_GET_ID 0x40
74 #define MG_SET_LID 0x41
75 #define MG_GET_LEKB 0x42
76 #define MG_SET_RD 0x43
77 #define MG_MAKE_RMS 0x44
78 #define MG_MAKE_KSE 0x45
79 #define MG_SET_IBD 0x46
80 #define MG_GET_IBD 0x47
81 #endif
83 #ifdef XC_POWERCLASS
84 #define XC_CHG_POWER 0x16
85 #endif
87 /* ++ CMD over Memory Stick */
88 /* Flash CMD */
89 #define BLOCK_READ 0xAA
90 #define BLOCK_WRITE 0x55
91 #define BLOCK_END 0x33
92 #define BLOCK_ERASE 0x99
93 #define FLASH_STOP 0xCC
95 /* Function CMD */
96 #define SLEEP 0x5A
97 #define CLEAR_BUF 0xC3
98 #define MS_RESET 0x3C
99 /* -- CMD over Memory Stick */
101 /* ++ CMD over Memory Stick Pro */
102 /* Flash CMD */
103 #define PRO_READ_DATA 0x20
104 #define PRO_WRITE_DATA 0x21
105 #define PRO_READ_ATRB 0x24
106 #define PRO_STOP 0x25
107 #define PRO_ERASE 0x26
108 #define PRO_READ_2K_DATA 0x27
109 #define PRO_WRITE_2K_DATA 0x28
111 /* Function CMD */
112 #define PRO_FORMAT 0x10
113 #define PRO_SLEEP 0x11
114 /* -- CMD over Memory Stick Pro */
116 /* register inside memory stick */
117 #define IntReg 0x01
118 #define StatusReg0 0x02
119 #define StatusReg1 0x03
121 #define SystemParm 0x10
122 #define BlockAdrs 0x11
123 #define CMDParm 0x14
124 #define PageAdrs 0x15
126 #define OverwriteFlag 0x16
127 #define ManagemenFlag 0x17
128 #define LogicalAdrs 0x18
129 #define ReserveArea 0x1A
131 /* register inside memory pro */
132 #define Pro_IntReg 0x01
133 #define Pro_StatusReg 0x02
134 #define Pro_TypeReg 0x04
135 #define Pro_IFModeReg 0x05
136 #define Pro_CatagoryReg 0x06
137 #define Pro_ClassReg 0x07
139 #define Pro_SystemParm 0x10
140 #define Pro_DataCount1 0x11
141 #define Pro_DataCount0 0x12
142 #define Pro_DataAddr3 0x13
143 #define Pro_DataAddr2 0x14
144 #define Pro_DataAddr1 0x15
145 #define Pro_DataAddr0 0x16
147 #define Pro_TPCParm 0x17
148 #define Pro_CMDParm 0x18
150 /* define for INT Register */
151 #define INT_REG_CED 0x80
152 #define INT_REG_ERR 0x40
153 #define INT_REG_BREQ 0x20
154 #define INT_REG_CMDNK 0x01
156 /* INT signal */
157 #define INT_CED 0x01
158 #define INT_ERR 0x02
159 #define INT_BREQ 0x04
160 #define INT_CMDNK 0x08
162 /* define for OverwriteFlag Register */
163 #define BLOCK_BOOT 0xC0
164 #define BLOCK_OK 0x80
165 #define PAGE_OK 0x60
166 #define DATA_COMPL 0x10
168 /* define for ManagemenFlag Register */
169 #define NOT_BOOT_BLOCK 0x4
170 #define NOT_TRANSLATION_TABLE 0x8
172 /* Header */
173 #define HEADER_ID0 (PPBUF_BASE2) /* 0 */
174 #define HEADER_ID1 (PPBUF_BASE2 + 1) /* 1 */
175 /* System Entry */
176 #define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4) /* 2 */
177 #define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5) /* 3 */
178 #define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6) /* 4 */
179 #define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7) /* 5 */
180 /* Boot & Attribute Information */
181 #define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2) /* 6 */
182 #define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3) /* 7 */
183 #define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4) /* 8 */
184 #define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5) /* 9 */
185 #define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6) /* 10 */
186 #define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7) /* 11 */
187 #define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8) /* 12 */
188 #define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9) /* 13 */
190 /* joey 2004-08-07 for MS check Procedure */
191 #define MS_Device_Type (PPBUF_BASE2 + 0x1D8) /* 14 */
192 /* end */
194 /* joey 2004-05-03 */
195 #define MS_4bit_Support (PPBUF_BASE2 + 0x1D3) /* 15 */
196 /* end */
198 #define setPS_NG 1
199 #define setPS_Error 0
201 /* define for Pro_SystemParm Register */
202 #define PARALLEL_8BIT_IF 0x40
203 #define PARALLEL_4BIT_IF 0x00
204 #define SERIAL_IF 0x80
206 /* define for StatusReg0 Register */
207 #define BUF_FULL 0x10
208 #define BUF_EMPTY 0x20
210 /* define for StatusReg1 Register */
211 #define MEDIA_BUSY 0x80
212 #define FLASH_BUSY 0x40
213 #define DATA_ERROR 0x20
214 #define STS_UCDT 0x10
215 #define EXTRA_ERROR 0x08
216 #define STS_UCEX 0x04
217 #define FLAG_ERROR 0x02
218 #define STS_UCFG 0x01
220 #define MS_SHORT_DATA_LEN 32
222 #define FORMAT_SUCCESS 0
223 #define FORMAT_FAIL 1
224 #define FORMAT_IN_PROGRESS 2
226 #define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80)
227 #define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F)
228 #define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80)
230 #define CHECK_MS_TRANS_FAIL(chip, retval) \
231 (((retval) != STATUS_SUCCESS) || \
232 (chip->rsp_buf[0] & MS_TRANSFER_ERR))
234 void mspro_polling_format_status(struct rts51x_chip *chip);
235 void mspro_format_sense(struct rts51x_chip *chip, unsigned int lun);
237 void mspro_stop_seq_mode(struct rts51x_chip *chip);
238 int reset_ms_card(struct rts51x_chip *chip);
239 int ms_rw(struct scsi_cmnd *srb, struct rts51x_chip *chip, u32 start_sector,
240 u16 sector_cnt);
241 int mspro_format(struct scsi_cmnd *srb, struct rts51x_chip *chip,
242 int short_data_len, int quick_format);
243 void ms_free_l2p_tbl(struct rts51x_chip *chip);
244 void ms_cleanup_work(struct rts51x_chip *chip);
245 int ms_power_off_card3v3(struct rts51x_chip *chip);
246 int release_ms_card(struct rts51x_chip *chip);
247 int ms_delay_write(struct rts51x_chip *chip);
249 #ifdef SUPPORT_MAGIC_GATE
251 int ms_switch_clock(struct rts51x_chip *chip);
252 int ms_write_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 * data,
253 int data_len);
254 int ms_read_bytes(struct rts51x_chip *chip, u8 tpc, u8 cnt, u8 cfg, u8 * data,
255 int data_len);
256 int ms_set_rw_reg_addr(struct rts51x_chip *chip, u8 read_start, u8 read_cnt,
257 u8 write_start, u8 write_cnt);
258 int ms_transfer_data(struct rts51x_chip *chip, u8 trans_mode, u8 tpc,
259 u16 sec_cnt, u8 cfg, int mode_2k, int use_sg, void *buf,
260 int buf_len);
261 #endif
263 #endif /* __RTS51X_MS_H */