i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / staging / wlags49_h2 / hcfcfg.h
blobef60da8c3ebc38e35bdcf1c39c58c3e7a22cf403
2 // vim:tw=110:ts=4:
3 #ifndef HCFCFG_H
4 #define HCFCFG_H 1
6 /*************************************************************************************************************
8 * FILE : hcfcfg.tpl // hcfcfg.h
10 * DATE : $Date: 2004/08/05 11:47:10 $ $Revision: 1.6 $
11 * Original: 2004/04/08 15:18:16 Revision: 1.40 Tag: t20040408_01
12 * Original: 2004/04/01 15:32:55 Revision: 1.38 Tag: t7_20040401_01
13 * Original: 2004/03/10 15:39:28 Revision: 1.34 Tag: t20040310_01
14 * Original: 2004/03/03 14:10:12 Revision: 1.32 Tag: t20040304_01
15 * Original: 2004/03/02 09:27:12 Revision: 1.30 Tag: t20040302_03
16 * Original: 2004/02/24 13:00:28 Revision: 1.25 Tag: t20040224_01
17 * Original: 2004/02/18 17:13:57 Revision: 1.23 Tag: t20040219_01
19 * AUTHOR : Nico Valster
21 * DESC : HCF Customization Macros
22 * hcfcfg.tpl list all #defines which must be specified to:
23 * adjust the HCF functions defined in HCF.C to the characteristics of a specific environment
24 * o maximum sizes for messages
25 * o Endianess
26 * Compiler specific macros
27 * o port I/O macros
28 * o type definitions
30 * By copying HCFCFG.TPL to HCFCFG.H and -if needed- modifying the #defines the WCI functionality can be
31 * tailored
33 * Supported environments:
34 * WVLAN_41 Miniport NDIS 3.1
35 * WVLAN_42 Packet Microsoft Visual C 1.5
36 * WVLAN_43 16 bits DOS ODI Microsoft Visual C 1.5
37 * WVLAN_44 32 bits ODI (__NETWARE_386__) WATCOM
38 * WVLAN_45 MAC_OS MPW?, Symantec?
39 * WVLAN_46 Windows CE (_WIN32_WCE) Microsoft ?
40 * WVLAN_47 LINUX (__LINUX__) GCC, discarded, based on GPL'ed HCF-light
41 * WVLAN_48 Miniport NDIS 5
42 * WVLAN_49 LINUX (__LINUX__) GCC, originally based on pre-compiled HCF_library
43 * migrated to use the HCF sources when Lucent Technologies
44 * brought the HCF module under GPL
45 * WVLAN_51 Miniport USB NDIS 5
46 * WVLAN_52 Miniport NDIS 4
47 * WVLAN_53 VxWorks END Station driver
48 * WVLAN_54 VxWorks END Access Point driver
49 * WVLAN_81 WavePoint BORLAND C
50 * WCITST Inhouse test tool Microsoft Visual C 1.5
51 * WSU WaveLAN Station Update Microsoft Visual C ??
52 * SCO UNIX not yet actually used ? ?
53 * __ppc OEM supplied ?
54 * _AM29K OEM supplied ?
55 * ? OEM supplied Microtec Research 80X86 Compiler
57 **************************************************************************************************************
60 * SOFTWARE LICENSE
62 * This software is provided subject to the following terms and conditions,
63 * which you should read carefully before using the software. Using this
64 * software indicates your acceptance of these terms and conditions. If you do
65 * not agree with these terms and conditions, do not use the software.
67 * COPYRIGHT © 1994 - 1995 by AT&T. All Rights Reserved
68 * COPYRIGHT © 1996 - 2000 by Lucent Technologies. All Rights Reserved
69 * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
70 * All rights reserved.
72 * Redistribution and use in source or binary forms, with or without
73 * modifications, are permitted provided that the following conditions are met:
75 * . Redistributions of source code must retain the above copyright notice, this
76 * list of conditions and the following Disclaimer as comments in the code as
77 * well as in the documentation and/or other materials provided with the
78 * distribution.
80 * . Redistributions in binary form must reproduce the above copyright notice,
81 * this list of conditions and the following Disclaimer in the documentation
82 * and/or other materials provided with the distribution.
84 * . Neither the name of Agere Systems Inc. nor the names of the contributors
85 * may be used to endorse or promote products derived from this software
86 * without specific prior written permission.
88 * Disclaimer
90 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
91 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
92 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
93 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
94 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
95 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
96 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
97 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
98 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
99 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
100 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
101 * DAMAGE.
104 *************************************************************************************************************/
106 /* Alignment
107 * Some platforms can access words on odd boundaries (with possibly an performance impact), at other
108 * platforms such an access may result in a memory access violation.
109 * It is assumed that everywhere where the HCF casts a char pointer into a word pointer, the alignment
110 * criteria are met. This put some restrictions on the MSF, which are assumed to be "automatically" fulfilled
111 * at the applicable platforms
112 * To assert this assumption, the macro HCF_ALIGN can be defined. The default value is 1, meaning byte
113 * alignment (or no alignment), a value of 2 means word alignment, a value of 4 means double word alignment
116 /***************************** IN_PORT_STRING_8_16 S a m p l e s *****************************************
118 // C implementation which let the processor handle the word-at-byte-boundary problem
119 #define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
120 { *(hcf_16 FAR*)addr = IN_PORT_WORD( port ); ((hcf_8 FAR*)addr)+=2; }
122 // C implementation which handles the word-at-byte-boundary problem
123 #define IN_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
124 { hcf_16 i = IN_PORT_WORD(port); *((hcf_8 FAR*)addr)++ = (hcf_8)i; *((hcf_8 FAR*)addr)++ = (hcf_8)(i>>8);}
126 // Assembler implementation
127 #define IN_PORT_STRING_8_16( port, addr, len) __asm \
129 __asm push di \
130 __asm push es \
131 __asm mov cx,len \
132 __asm les di,addr \
133 __asm mov dx,port \
134 __asm rep insw \
135 __asm pop es \
136 __asm pop di \
140 ***************************** OUT_PORT_STRING_8_16 S a m p l e s ******************************************
142 // C implementation which let the processor handle the word-at-byte-boundary problem
143 #define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
144 { OUT_PORT_WORD( port, *(hcf_16 FAR*)addr ) ; ((hcf_8 FAR*)addr)+=2; }
146 // C implementation which handles the word-at-byte-boundary problem
147 #define OUT_PORT_STRING_8_16( port, addr, n) while ( n-- ) \
148 { OUT_PORT_WORD( port, *((hcf_8 FAR*)addr) | *(((hcf_8 FAR*)addr)+1)<<8 ); (hcf_8 FAR*)addr+=2; }
150 // Assembler implementation
151 #define OUT_PORT_STRING_8_16( port, addr, len) __asm \
153 __asm push si \
154 __asm push ds \
155 __asm mov cx,len \
156 __asm lds si,addr \
157 __asm mov dx,port \
158 __asm rep outsw \
159 __asm pop ds \
160 __asm pop si \
163 *************************************************************************************************************/
166 /************************************************************************************************/
167 /****************** C O M P I L E R S P E C I F I C M A C R O S ***************************/
168 /************************************************************************************************/
169 /*************************************************************************************************
171 * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
172 * !!!! Do not call these macros with parameters which introduce side effects !!!!
173 * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
176 * By selecting the appropriate Macro definitions by means of modifying the "#ifdef 0/1" lines, the HCF can be
177 * adjusted for the I/O characteristics of a specific compiler
179 * If needed the macros can be modified or replaced with definitions appropriate for your personal platform.
180 * If you need to make such changes it is appreciated if you inform Agere Systems
181 * That way the changes can become part of the next release of the WCI
183 * For convenience of the MSF-programmer, all macros are allowed to modify their parameters (although some
184 * might argue that this would constitute bad coding practice). This has its implications on the HCF, e.g. as a
185 * consequence these macros should not be called with parameters which have side effects, e.g auto-increment.
187 * in the Microsoft implementation of inline assembly it is O.K. to corrupt all flags except the direction flag
188 * and to corrupt all registers except the segment registers and EDI, ESI, ESP and EBP (or their 16 bits
189 * equivalents). Other environments may have other constraints
191 * in the Intel environment it is O.K to have a word (as a 16 bits quantity) at a byte boundary, hence
192 * IN_/OUT_PORT_STRING_8_16 can move words between PC-memory and NIC-memory with as only constraint that the
193 * words are on a word boundary in NIC-memory. This does not hold true for all conceivable environments, e.g.
194 * an Motorola 68xxx does not allow this. Probably/hopefully the boundary conditions imposed by these type of
195 * platforms prevent this case from materializing. If this is not the case, OUT_PORT_STRING_8_16 must be coded
196 * by combining two Host memory hcf_8 values at a time to a single hcf_16 value to be passed to the NIC and
197 * IN_PORT_STRING_8_16 the single hcf_16 retrieved from the NIC must be split in two hcf_8 values to be stored
198 * in Host memory (see the sample code above)
200 * The prototypes and functional description of the macros are:
202 * hcf_16 IN_PORT_WORD( hcf_16 port )
203 * Reads a word (16 bits) from the specified port
205 * void OUT_PORT_WORD( hcf_16 port, hcf_16 value)
206 * Writes a word (16 bits) to the specified port
208 * hcf_16 IN_PORT_DWORD( hcf_16 port )
209 * Reads a dword (32 bits) from the specified port
211 * void OUT_PORT_DWORD( hcf_16 port, hcf_32 value)
212 * Writes a dword (32 bits) to the specified port
214 * void IN_PORT_STRING_8_16( port, addr, len)
215 * Reads len number of words (16 bits) from NIC memory via the specified port to the (FAR)
216 * byte-pointer addr in PC-RAM
217 * Note that len specifies the number of words, NOT the number of bytes
218 * !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!!
219 * See also the common notes for IN_PORT_STRING_8_16 and OUT_PORT_STRING_8_16
221 * void OUT_PORT_STRING_8_16( port, addr, len)
222 * Writes len number of words (16 bits) from the (FAR) byte-pointer addr in PC-RAM via the specified
223 * port to NIC memory
224 * Note that len specifies the number of words, NOT the number of bytes.
225 * !!!NOTE, although len specifies the number of words, addr MUST be a char pointer NOTE!!!
227 * The peculiar combination of word-length and char pointers for IN_PORT_STRING_8_16 as well as
228 * OUT_PORT_STRING_8_16 is justified by the assumption that it offers a more optimal algorithm
230 * void IN_PORT_STRING_32( port, addr, len)
231 * Reads len number of double-words (32 bits) from NIC memory via the specified port to the (FAR)
232 * double-word address addr in PC-RAM
234 * void OUT_PORT_STRING_32( port, addr, len)
235 * Writes len number of double-words (32 bits) from the (FAR) double-word address addr in PC-RAM via
236 * the specified port to NIC memory
238 * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
239 * !!!! Do not call these macros with parameters which introduce side effects !!!!
240 * !!!!!!!!!!!!!!!!!!!!!!!!! Note to the HCF-implementor !!!!!!!!!!!!!!!!!!!!!!!!!
242 *************************************************************************************************/
244 /**************************** define INT Types ******************************/
245 typedef unsigned char hcf_8;
246 typedef unsigned short hcf_16;
247 typedef unsigned long hcf_32;
249 /**************************** define I/O Types ******************************/
250 #define HCF_IO_MEM 0x0001 // memory mapped I/O ( 0: Port I/O )
251 #define HCF_IO_32BITS 0x0002 // 32Bits support ( 0: only 16 Bits I/O)
253 /****************************** #define HCF_TYPE ********************************/
254 #define HCF_TYPE_NONE 0x0000 // No type
255 #define HCF_TYPE_WPA 0x0001 // WPA support
256 #define HCF_TYPE_USB 0x0002 // reserved (USB Dongle driver support)
257 //#define HCF_TYPE_HII 0x0004 // Hermes-II, to discriminate H-I and H-II CFG_HCF_OPT_STRCT
258 #define HCF_TYPE_WARP 0x0008 // WARP F/W
259 #define HCF_TYPE_PRELOADED 0x0040 // pre-loaded F/W
260 #define HCF_TYPE_HII5 0x0080 // Hermes-2.5 H/W
261 #define HCF_TYPE_CCX 0x0100 // CKIP
262 #define HCF_TYPE_BEAGLE_HII5 0x0200 // Beagle Hermes-2.5 H/W
263 #define HCF_TYPE_TX_DELAY 0x4000 // Delayed transmission ( non-DMA only)
265 /****************************** #define HCF_ASSERT ******************************/
266 #define HCF_ASSERT_NONE 0x0000 // No assert support
267 #define HCF_ASSERT_PRINTF 0x0001 // Hermes generated debug info
268 #define HCF_ASSERT_SW_SUP 0x0002 // logging via Hermes support register
269 #define HCF_ASSERT_MB 0x0004 // logging via Mailbox
270 #define HCF_ASSERT_RT_MSF_RTN 0x4000 // dynamically binding of msf_assert routine
271 #define HCF_ASSERT_LNK_MSF_RTN 0x8000 // statically binding of msf_assert routine
273 /****************************** #define HCF_ENCAP *******************************/
274 #define HCF_ENC_NONE 0x0000 // No encapsulation support
275 #define HCF_ENC 0x0001 // HCF handles En-/Decapsulation
276 #define HCF_ENC_SUP 0x0002 // HCF supports MSF to handle En-/Decapsulation
278 /****************************** #define HCF_EXT *********************************/
279 #define HCF_EXT_NONE 0x0000 // No expanded features
280 #define HCF_EXT_INFO_LOG 0x0001 // logging of Hermes Info frames
281 //#define HCF_EXT_INT_TX_OK 0x0002 // RESERVED!!! monitoring successful Tx message
282 #define HCF_EXT_INT_TX_EX 0x0004 // monitoring unsuccessful Tx message
283 //#define HCF_EXT_MON_MODE 0x0008 // LEGACY
284 #define HCF_EXT_TALLIES_FW 0x0010 // support for up to 32 Hermes Engineering tallies
285 #define HCF_EXT_TALLIES_HCF 0x0020 // support for up to 8 HCF Engineering tallies
286 #define HCF_EXT_NIC_ACCESS 0x0040 // direct access via Aux-ports and to Hermes registers and commands
287 #define HCF_EXT_MB 0x0080 // MailBox code expanded
288 #define HCF_EXT_IFB_STRCT 0x0100 // MSF custom pointer in IFB
289 #define HCF_EXT_DESC_STRCT 0x0200 // MSF custom pointer in Descriptor
290 #define HCF_EXT_TX_CONT 0x4000 // Continuous transmit test
291 #define HCF_EXT_INT_TICK 0x8000 // enables TimerTick interrupt generation
293 /****************************** #define HCF_SLEEP *******************************/
294 #define HCF_DDS 0x0001 // Disconnected Deep Sleep
295 #define HCF_CDS 0x0002 // Connected Deep Sleep
297 /****************************** #define HCF_TALLIES ******************************/
298 #define HCF_TALLIES_NONE 0x0000 // No tally support
299 #define HCF_TALLIES_NIC 0x0001 // Hermes Tallies accumulated in IFB
300 #define HCF_TALLIES_HCF 0x0002 // HCF Tallies accumulated in IFB
301 #define HCF_TALLIES_RESET 0x8000 // Tallies in IFB are reset when reported via hcf_get_info
303 /************************************************************************************************/
304 /****************************************** L I N U X *****************************************/
305 /************************************************************************************************/
307 #ifdef WVLAN_49
308 #include <asm/io.h>
309 //#include <linux/module.h>
310 #include <wl_version.h>
312 /* The following macro ensures that no symbols are exported, minimizing the chance of a symbol
313 collision in the kernel */
314 //EXPORT_NO_SYMBOLS; //;?this place seems not appropriately to me
316 //#define HCF_SLEEP (HCF_CDS | HCF_DDS )
317 #define HCF_SLEEP (HCF_CDS)
319 /* Note: Non-WARP firmware all support WPA. However the original Agere
320 * linux driver does not enable WPA. Enabling WPA here causes whatever
321 * preliminary WPA logic to be included, some of which may be specific
322 * to HERMESI.
324 * Various comment are clear that WARP and WPA are not compatible
325 * (which may just mean WARP does WPA in a different fashion).
328 /* #define HCF_TYPE (HCF_TYPE_HII5|HCF_TYPE_STA|HCF_TYPE_AP) */
329 #ifdef HERMES25
330 #ifdef WARP
331 #define HCF_TYPE ( HCF_TYPE_WARP | HCF_TYPE_HII5 )
332 #else
333 #define HCF_TYPE (HCF_TYPE_HII5 | HCF_TYPE_WPA)
334 #endif /* WARP */
335 #else
336 #define HCF_TYPE HCF_TYPE_WPA
337 #endif /* HERMES25 */
339 #ifdef ENABLE_DMA
340 #define HCF_DMA 1
341 #endif // ENABLE_DMA
343 /* We now need a switch to include support for the Mailbox and other necessary extensions */
344 #define HCF_EXT ( HCF_EXT_MB | HCF_EXT_INFO_LOG | HCF_EXT_INT_TICK )//get deepsleep exercise going
346 /* ;? The Linux MSF still uses these definitions; define it here until it's removed */
347 #ifndef HCF_TYPE_HII
348 #define HCF_TYPE_HII 0x0004
349 #endif
351 #ifndef HCF_TYPE_AP
352 #define HCF_TYPE_AP 0x0010
353 #endif
355 #ifndef HCF_TYPE_STA
356 #define HCF_TYPE_STA 0x0020
357 #endif // HCF_TYPE_STA
359 /* Guarantees word alignment */
360 #define HCF_ALIGN 2
362 /* Endian macros CNV_INT_TO_LITTLE() and CNV_LITTLE_TO_INT() were renamed to
363 CNV_SHORT_TO_LITTLE() and CNV_LITTLE_TO_SHORT() */
364 #ifndef CNV_INT_TO_LITTLE
365 #define CNV_INT_TO_LITTLE CNV_SHORT_TO_LITTLE
366 #endif
368 #ifndef CNV_LITTLE_TO_INT
369 #define CNV_LITTLE_TO_INT CNV_LITTLE_TO_SHORT
370 #endif
372 #define HCF_ERR_BUSY 0x06
374 /* UIL defines were removed from the HCF */
375 #define UIL_SUCCESS HCF_SUCCESS
376 #define UIL_ERR_TIME_OUT HCF_ERR_TIME_OUT
377 #define UIL_ERR_NO_NIC HCF_ERR_NO_NIC
378 #define UIL_ERR_LEN HCF_ERR_LEN
379 #define UIL_ERR_MIN HCF_ERR_MAX /*end of HCF errors which are passed through to UIL
380 *** ** *** ****** ***** *** ****** ******* ** *** */
381 #define UIL_ERR_IN_USE 0x44
382 #define UIL_ERR_WRONG_IFB 0x46
383 #define UIL_ERR_MAX 0x7F /*upper boundary of UIL errors without HCF-pendant
384 ***** ******** ** *** ****** ******* *** ******* */
385 #define UIL_ERR_BUSY HCF_ERR_BUSY
386 #define UIL_ERR_DIAG_1 HCF_ERR_DIAG_1
387 #define UIL_FAILURE 0xFF /* 20010705 nv this relick should be eridicated */
388 #define UIL_ERR_PIF_CONFLICT 0x40 //obsolete
389 #define UIL_ERR_INCOMP_DRV 0x41 //obsolete
390 #define UIL_ERR_DOS_CALL 0x43 //obsolete
391 #define UIL_ERR_NO_DRV 0x42 //obsolete
392 #define UIL_ERR_NSTL 0x45 //obsolete
396 #if 0 //;? #ifdef get this going LATER HERMES25
397 #define HCF_IO HCF_IO_32BITS
398 #define HCF_DMA 1
399 #define HCF_DESC_STRCT_EXT 4
401 /* Switch for BusMaster DMA support. Note that the above define includes the DMA-specific HCF
402 code in the build. This define sets the MSF to use DMA; if ENABLE_DMA is not defined, then
403 port I/O will be used in the build */
404 #ifndef BUS_PCMCIA
405 #define ENABLE_DMA
406 #endif // USE_PCMCIA
408 #endif // HERMES25
411 /* Overrule standard WaveLAN Packet Size when in DMA mode */
412 #ifdef ENABLE_DMA
413 #define HCF_MAX_PACKET_SIZE 2304
414 #else
415 #define HCF_MAX_PACKET_SIZE 1514
416 #endif // ENABLE_DMA
418 /* The following sets the component ID, as well as the versioning. See also wl_version.h */
419 #define MSF_COMPONENT_ID COMP_ID_LINUX
421 #define MSF_COMPONENT_VAR DRV_VARIANT
422 #define MSF_COMPONENT_MAJOR_VER DRV_MAJOR_VERSION
423 #define MSF_COMPONENT_MINOR_VER DRV_MINOR_VERSION
425 /* Define the following to turn on assertions in the HCF */
426 //#define HCF_ASSERT 0x8000
427 #define HCF_ASSERT HCF_ASSERT_LNK_MSF_RTN // statically binding of msf_assert routine
429 #ifdef USE_BIG_ENDIAN
430 #define HCF_BIG_ENDIAN 1
431 #else
432 #define HCF_BIG_ENDIAN 0
433 #endif /* USE_BIG_ENDIAN */
435 /* Define the following if your system uses memory-mapped IO */
436 //#define HCF_MEM_IO
438 /* The following defines the standard macros required by the HCF to move data to/from the card */
439 #define IN_PORT_BYTE(port) ((hcf_8)inb( (hcf_io)(port) ))
440 #define IN_PORT_WORD(port) ((hcf_16)inw( (hcf_io)(port) ))
441 #define OUT_PORT_BYTE(port, value) (outb( (hcf_8) (value), (hcf_io)(port) ))
442 #define OUT_PORT_WORD(port, value) (outw((hcf_16) (value), (hcf_io)(port) ))
444 #define IN_PORT_STRING_16(port, dst, n) insw((hcf_io)(port), dst, n)
445 #define OUT_PORT_STRING_16(port, src, n) outsw((hcf_io)(port), src, n)
446 //#define IN_PORT_STRINGL(port, dst, n) insl((port), (dst), (n))
447 //#define OUT_PORT_STRINGL(port, src, n) outsl((port), (src), (n))
448 #define IN_PORT_STRING_32(port, dst, n) insl((port), (dst), (n))
449 #define OUT_PORT_STRING_32(port, src, n) outsl((port), (src), (n))
450 #define IN_PORT_HCF32(port) inl( (hcf_io)(port) )
451 #define OUT_PORT_HCF32(port, value) outl((hcf_32)(value), (hcf_io)(port) )
453 #define IN_PORT_DWORD(port) IN_PORT_HCF32(port)
454 #define OUT_PORT_DWORD(port, value) OUT_PORT_HCF32(port, value)
456 #define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len)
457 #define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len)
459 #ifndef CFG_SCAN_CHANNELS_2GHZ
460 #define CFG_SCAN_CHANNELS_2GHZ 0xFCC2
461 #endif /* CFG_SCAN_CHANNELS_2GHZ */
463 #define HCF_MAX_MSG 1600 //get going ;?
464 #endif // WVLAN_49
466 /************************************************************************************************************/
467 /*********************************** **************************************/
468 /************************************************************************************************************/
469 #if ! defined HCF_ALIGN
470 #define HCF_ALIGN 1 //default to no alignment
471 #endif // HCF_ALIGN
473 #if ! defined HCF_ASSERT
474 #define HCF_ASSERT 0
475 #endif // HCF_ASSERT
477 #if ! defined HCF_BIG_ENDIAN
478 #define HCF_BIG_ENDIAN 0
479 #endif // HCF_BIG_ENDIAN
481 #if ! defined HCF_DMA
482 #define HCF_DMA 0
483 #endif // HCF_DMA
485 #if ! defined HCF_ENCAP
486 #define HCF_ENCAP HCF_ENC
487 #endif // HCF_ENCAP
489 #if ! defined HCF_EXT
490 #define HCF_EXT 0
491 #endif // HCF_EXT
493 #if ! defined HCF_INT_ON
494 #define HCF_INT_ON 1
495 #endif // HCF_INT_ON
497 #if ! defined HCF_IO
498 #define HCF_IO 0 //default 16 bits support only, port I/O
499 #endif // HCF_IO
501 #if ! defined HCF_LEGACY
502 #define HCF_LEGACY 0
503 #endif // HCF_LEGACY
505 #if ! defined HCF_MAX_LTV
506 #define HCF_MAX_LTV 1200 // sufficient for all known purposes
507 #endif // HCF_MAX_LTV
509 #if ! defined HCF_PROT_TIME
510 #define HCF_PROT_TIME 100 // number of 10K microsec protection timer against H/W malfunction
511 #endif // HCF_PROT_TIME
513 #if ! defined HCF_SLEEP
514 #define HCF_SLEEP 0
515 #endif // HCF_SLEEP
517 #if ! defined HCF_TALLIES
518 #define HCF_TALLIES ( HCF_TALLIES_NIC | HCF_TALLIES_HCF )
519 #endif // HCF_TALLIES
521 #if ! defined HCF_TYPE
522 #define HCF_TYPE 0
523 #endif // HCF_TYPE
525 #if HCF_BIG_ENDIAN
526 #undef HCF_BIG_ENDIAN
527 #define HCF_BIG_ENDIAN 1 //just for convenience of generating cfg_hcf_opt
528 #endif // HCF_BIG_ENDIAN
530 #if HCF_DMA
531 #undef HCF_DMA
532 #define HCF_DMA 1 //just for convenience of generating cfg_hcf_opt
533 #endif // HCF_DMA
535 #if HCF_INT_ON
536 #undef HCF_INT_ON
537 #define HCF_INT_ON 1 //just for convenience of generating cfg_hcf_opt
538 #endif // HCF_INT_ON
541 #if ! defined IN_PORT_STRING_8_16
542 #define IN_PORT_STRING_8_16(port, addr, len) IN_PORT_STRING_16(port, addr, len)
543 #define OUT_PORT_STRING_8_16(port, addr, len) OUT_PORT_STRING_16(port, addr, len)
544 #endif // IN_PORT_STRING_8_16
546 /************************************************************************************************/
547 /********** *************/
548 /************************************************************************************************/
550 #if ! defined FAR
551 #define FAR // default to flat 32-bits code
552 #endif // FAR
554 typedef hcf_8 FAR *wci_bufp; // segmented 16-bits or flat 32-bits pointer to 8 bits unit
555 typedef hcf_16 FAR *wci_recordp; // segmented 16-bits or flat 32-bits pointer to 16 bits unit
557 /* I/O Address size
558 * Platforms which use port mapped I/O will (in general) have a 64k I/O space, conveniently expressed in a
559 * 16-bits quantity
560 * Platforms which use memory mapped I/O will (in general) have an I/O space much larger than 64k, and need a
561 * 32-bits quantity to express the I/O base
564 #if HCF_IO & HCF_IO_MEM
565 typedef hcf_32 hcf_io;
566 #else
567 typedef hcf_16 hcf_io;
568 #endif //HCF_IO
570 #if HCF_PROT_TIME > 128
571 #define HCF_PROT_TIME_SHFT 3
572 #define HCF_PROT_TIME_DIV 8
573 #elif HCF_PROT_TIME > 64
574 #define HCF_PROT_TIME_SHFT 2
575 #define HCF_PROT_TIME_DIV 4
576 #elif HCF_PROT_TIME > 32
577 #define HCF_PROT_TIME_SHFT 1
578 #define HCF_PROT_TIME_DIV 2
579 #else //HCF_PROT_TIME >= 19
580 #define HCF_PROT_TIME_SHFT 0
581 #define HCF_PROT_TIME_DIV 1
582 #endif
584 #define HCF_PROT_TIME_CNT (HCF_PROT_TIME / HCF_PROT_TIME_DIV)
587 /************************************************************************************************************/
588 /******************************************* . . . . . . . . . *********************************************/
589 /************************************************************************************************************/
591 /* MSF_COMPONENT_ID is used to define the CFG_IDENTITY_STRCT in HCF.C
592 * CFG_IDENTITY_STRCT is defined in HCF.C purely based on convenience arguments.
593 * The HCF can not have the knowledge to determine the ComponentId field of the Identity record (aka as
594 * Version Record), therefore the MSF part of the Drivers must supply this value via the System Constant
595 * MSF_COMPONENT_ID.
596 * There is a set of values predefined in MDD.H (format COMP_ID_.....)
598 * Note that taking MSF_COMPONENT_ID as a default value for DUI_COMPAT_VAR is purely an implementation
599 * convenience, the numerical values of these two quantities have none functional relationship whatsoever.
602 #if defined MSF_COMPONENT_ID
604 #if ! defined DUI_COMPAT_VAR
605 #define DUI_COMPAT_VAR MSF_COMPONENT_ID
606 #endif // DUI_COMPAT_VAR
608 #if ! defined DUI_COMPAT_BOT //;?this way utilities can lower as well raise the bottom
609 #define DUI_COMPAT_BOT 8
610 #endif // DUI_COMPAT_BOT
612 #if ! defined DUI_COMPAT_TOP //;?this way utilities can lower as well raise the top
613 #define DUI_COMPAT_TOP 8
614 #endif // DUI_COMPAT_TOP
616 #endif // MSF_COMPONENT_ID
618 #if (HCF_TYPE) & HCF_TYPE_HII5
620 #if ! defined HCF_HSI_VAR_5
621 #define HCF_HSI_VAR_5
622 #endif // HCF_HSI_VAR_5
624 #if ! defined HCF_APF_VAR_4
625 #define HCF_APF_VAR_4
626 #endif // HCF_APF_VAR_4
628 #if (HCF_TYPE) & HCF_TYPE_WARP
629 #if ! defined HCF_STA_VAR_4
630 #define HCF_STA_VAR_4
631 #endif // HCF_STA_VAR_4
632 #else
633 #if ! defined HCF_STA_VAR_2
634 #define HCF_STA_VAR_2
635 #endif // HCF_STA_VAR_2
636 #endif
638 #if defined HCF_HSI_VAR_4
639 err: HSI variants 4 correspond with HII;
640 #endif // HCF_HSI_VAR_4
642 #else
644 #if ! defined HCF_HSI_VAR_4
645 #define HCF_HSI_VAR_4 //Hermes-II all types (for the time being!)
646 #endif // HCF_HSI_VAR_4
648 #if ! defined HCF_APF_VAR_2
649 #define HCF_APF_VAR_2
650 #endif // HCF_APF_VAR_2
652 #if ! defined HCF_STA_VAR_2
653 #define HCF_STA_VAR_2
654 #endif // HCF_STA_VAR_2
656 #endif // HCF_TYPE_HII5
658 #if ! defined HCF_PRI_VAR_3
659 #define HCF_PRI_VAR_3
660 #endif // HCF_PRI_VAR_3
662 #if defined HCF_HSI_VAR_1 || defined HCF_HSI_VAR_2 || defined HCF_HSI_VAR_3
663 err: HSI variants 1, 2 and 3 correspond with H-I only;
664 #endif // HCF_HSI_VAR_1, HCF_HSI_VAR_2, HCF_HSI_VAR_3
666 #if defined HCF_PRI_VAR_1 || defined HCF_PRI_VAR_2
667 err: primary variants 1 and 2 correspond with H-I only;
668 #endif // HCF_PRI_VAR_1 / HCF_PRI_VAR_2
671 /************************************************************************************************************/
672 /******************************************* . . . . . . . . . *********************************************/
673 /************************************************************************************************************/
676 /* The BASED customization macro is used to resolves the SS!=DS conflict for the Interrupt Service logic in
677 * DOS Drivers. Due to the cumbersomeness of mixing C and assembler local BASED variables still end up in the
678 * wrong segment. The workaround is that the HCF uses only global BASED variables or IFB-based variables.
679 * The "BASED" construction (supposedly) only amounts to something in the small memory model.
681 * Note that the whole BASED rigmarole is needlessly complicated because both the Microsoft Compiler and
682 * Linker are unnecessary restrictive in what far pointer manipulation they allow
685 #if ! defined BASED
686 #define BASED
687 #endif // BASED
689 #if ! defined EXTERN_C
690 #ifdef __cplusplus
691 #define EXTERN_C extern "C"
692 #else
693 #define EXTERN_C
694 #endif // __cplusplus
695 #endif // EXTERN_C
697 #if ! defined NULL
698 #define NULL ((void *) 0)
699 #endif // NULL
701 #if ! defined TEXT
702 #define TEXT(x) x
703 #endif // TEXT
705 /************************************************************************************************************/
706 /*********************** C O N F L I C T D E T E C T I O N & R E S O L U T I O N ************************/
707 /************************************************************************************************************/
708 #if HCF_ALIGN != 1 && HCF_ALIGN != 2 && HCF_ALIGN != 4 && HCF_ALIGN != 8
709 err: invalid value for HCF_ALIGN;
710 #endif // HCF_ALIGN
712 #if (HCF_ASSERT) & ~( HCF_ASSERT_PRINTF | HCF_ASSERT_SW_SUP | HCF_ASSERT_MB | HCF_ASSERT_RT_MSF_RTN | \
713 HCF_ASSERT_LNK_MSF_RTN )
714 err: invalid value for HCF_ASSERT;
715 #endif // HCF_ASSERT
717 #if (HCF_ASSERT) & HCF_ASSERT_MB && ! ( (HCF_EXT) & HCF_EXT_MB ) //detect potential conflict
718 err: these macros are not used consistently;
719 #endif // HCF_ASSERT_MB / HCF_EXT_MB
721 #if HCF_BIG_ENDIAN != 0 && HCF_BIG_ENDIAN != 1
722 err: invalid value for HCF_BIG_ENDIAN;
723 #endif // HCF_BIG_ENDIAN
725 #if HCF_DMA != 0 && HCF_DMA != 1
726 err: invalid value for HCF_DMA;
727 #endif // HCF_DMA
729 #if (HCF_ENCAP) & ~( HCF_ENC | HCF_ENC_SUP )
730 err: invalid value for HCF_ENCAP;
731 #endif // HCF_ENCAP
733 #if (HCF_EXT) & ~( HCF_EXT_INFO_LOG | HCF_EXT_INT_TX_EX | HCF_EXT_TALLIES_FW | HCF_EXT_TALLIES_HCF | \
734 HCF_EXT_NIC_ACCESS | HCF_EXT_MB | HCF_EXT_INT_TICK | \
735 HCF_EXT_IFB_STRCT | HCF_EXT_DESC_STRCT | HCF_EXT_TX_CONT )
736 err: invalid value for HCF_EXT;
737 #endif // HCF_EXT
739 #if HCF_INT_ON != 0 && HCF_INT_ON != 1
740 err: invalid value for HCF_INT_ON;
741 #endif // HCF_INT_ON
743 #if (HCF_IO) & ~( HCF_IO_MEM | HCF_IO_32BITS )
744 err: invalid value for HCF_IO;
745 #endif // HCF_IO
747 #if HCF_LEGACY != 0 && HCF_LEGACY != 1
748 err: invalid value for HCF_LEGACY;
749 #endif // HCF_LEGACY
751 #if HCF_MAX_LTV < 16 || HCF_MAX_LTV > 2304
752 err: invalid value for HCF_MAX_LTV;
753 #endif // HCF_MAX_LTV
755 #if HCF_PROT_TIME != 0 && ( HCF_PROT_TIME < 19 || 256 < HCF_PROT_TIME )
756 err: below minimum .08 second required by Hermes or possibly above hcf_32 capacity;
757 #endif // HCF_PROT_TIME
759 #if (HCF_SLEEP) & ~( HCF_CDS | HCF_DDS )
760 err: invalid value for HCF_SLEEP;
761 #endif // HCF_SLEEP
763 #if (HCF_SLEEP) && ! (HCF_INT_ON)
764 err: these macros are not used consistently;
765 #endif // HCF_SLEEP / HCF_INT_ON
767 #if (HCF_SLEEP) && ! ( (HCF_EXT) & HCF_EXT_INT_TICK )
768 //;? err: these macros are not used consistently;
769 #endif // HCF_SLEEP / HCF_EXT_INT_TICK
771 #if (HCF_TALLIES) & ~( HCF_TALLIES_HCF | HCF_TALLIES_NIC | HCF_TALLIES_RESET ) || \
772 (HCF_TALLIES) == HCF_TALLIES_RESET
773 err: invalid value for HCF_TALLIES;
774 #endif // HCF_TALLIES
776 #if (HCF_TYPE) & ~(HCF_TYPE_WPA | HCF_TYPE_USB | HCF_TYPE_PRELOADED | HCF_TYPE_HII5 | HCF_TYPE_WARP | \
777 HCF_TYPE_CCX /* | HCF_TYPE_TX_DELAY */ )
778 err: invalid value for HCF_TYPE;
779 #endif //HCF_TYPE
781 #if (HCF_TYPE) & HCF_TYPE_WARP && (HCF_TYPE) & HCF_TYPE_WPA
782 err: at most 1 of these macros should be defined;
783 #endif //HCF_TYPE_WARP / HCF_TYPE_WPA
785 #endif //HCFCFG_H