drivers/staging/wlags49_h2/hcfdef.h

   1 #ifndef HCFDEFC_H
   2 #define HCFDEFC_H 1
   3
   4 /*************************************************************************************************
   5  *
   6  * FILE   : HCFDEF.H
   7  *
   8  * DATE   : $Date: 2004/08/05 11:47:10 $   $Revision: 1.8 $
   9  * Original: 2004/05/28 14:05:35    Revision: 1.59      Tag: hcf7_t20040602_01
  10  * Original: 2004/05/13 15:31:45    Revision: 1.53      Tag: hcf7_t7_20040513_01
  11  * Original: 2004/04/15 09:24:42    Revision: 1.44      Tag: hcf7_t7_20040415_01
  12  * Original: 2004/04/13 14:22:45    Revision: 1.43      Tag: t7_20040413_01
  13  * Original: 2004/04/01 15:32:55    Revision: 1.40      Tag: t7_20040401_01
  14  * Original: 2004/03/10 15:39:28    Revision: 1.36      Tag: t20040310_01
  15  * Original: 2004/03/03 14:10:12    Revision: 1.34      Tag: t20040304_01
  16  * Original: 2004/03/02 09:27:12    Revision: 1.32      Tag: t20040302_03
  17  * Original: 2004/02/24 13:00:29    Revision: 1.29      Tag: t20040224_01
  18  * Original: 2004/02/18 17:13:57    Revision: 1.26      Tag: t20040219_01
  19  *
  20  * AUTHOR : Nico Valster
  21  *
  22  * SPECIFICATION: ...........
  23  *
  24  * DESC   : Definitions and Prototypes for HCF only
  25  *
  26  **************************************************************************************************
  27  *
  28  *
  29  * SOFTWARE LICENSE
  30  *
  31  * This software is provided subject to the following terms and conditions,
  32  * which you should read carefully before using the software.  Using this
  33  * software indicates your acceptance of these terms and conditions.  If you do
  34  * not agree with these terms and conditions, do not use the software.
  35  *
  36  * COPYRIGHT © 1994 - 1995   by AT&T.                All Rights Reserved
  37  * COPYRIGHT © 1996 - 2000 by Lucent Technologies.   All Rights Reserved
  38  * COPYRIGHT © 2001 - 2004   by Agere Systems Inc.   All Rights Reserved
  39  * All rights reserved.
  40  *
  41  * Redistribution and use in source or binary forms, with or without
  42  * modifications, are permitted provided that the following conditions are met:
  43  *
  44  * . Redistributions of source code must retain the above copyright notice, this
  45  *    list of conditions and the following Disclaimer as comments in the code as
  46  *    well as in the documentation and/or other materials provided with the
  47  *    distribution.
  48  *
  49  * . Redistributions in binary form must reproduce the above copyright notice,
  50  *    this list of conditions and the following Disclaimer in the documentation
  51  *    and/or other materials provided with the distribution.
  52  *
  53  * . Neither the name of Agere Systems Inc. nor the names of the contributors
  54  *    may be used to endorse or promote products derived from this software
  55  *    without specific prior written permission.
  56  *
  57  * Disclaimer
  58  *
  59  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
  60  * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
  61  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
  62  * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
  63  * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
  64  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  65  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  66  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  67  * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
  68  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  69  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  70  * DAMAGE.
  71  *
  72  *
  73  *************************************************************************************************/
  74
  75
  76 /************************************************************************************************/
  77 /*********************************  P R E F I X E S  ********************************************/
  78 /************************************************************************************************/
  79 //IFB_      Interface Block
  80 //HCMD_     Hermes Command
  81 //HFS_      Hermes (Transmit/Receive) Frame Structure
  82 //HREG_     Hermes Register
  83
  84 /*************************************************************************************************/
  85
  86 /************************************************************************************************/
  87 /********************************* GENERAL EQUATES **********************************************/
  88 /************************************************************************************************/
  89
  90
  91 #define HCF_MAGIC               0x7D37  // "}7" Handle validation
  92
  93 #define PLUG_DATA_OFFSET        0x00000800  //needed by some test tool on top of H-II NDIS driver
  94
  95 #define INI_TICK_INI            0x00040000L
  96
  97 #define IO_IN                   0       //hcfio_in_string
  98 #define IO_OUT                  1       //hcfio_out_string
  99
 100 //DO_ASSERT, create an artificial FALSE to force an ASSERT without the nasty compiler warning
 101 #define DO_ASSERT               ( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
 102 #define NT_ASSERT               0x0000      //, NEVER_TESTED
 103 #define NEVER_TESTED            MERGE_2( 0xEFFE, 0xFEEF )
 104 #define SE_ASSERT               0x5EFF      /* Side Effect, HCFASSERT invokation which are only called for the
 105                                              * side effect and which should never trigger */
 106 #define DHF_FILE_NAME_OFFSET    10000       //to distinguish DHF from HCF asserts by means of line number
 107 #define MMD_FILE_NAME_OFFSET    20000       //to distinguish MMD from HCF asserts by means of line number
 108
 109 // trace codes used to
 110 // 1: profile execution times via HCF_TRACE and HCF_TRACE_VALUE
 111 // 2: hierarchical flow information via HCFLOGENTRY / HCFLOGEXIT
 112
 113 //#define HCF_TRACE_CONNECT     useless
 114 //#define HCF_TRACE_DISCONNECT  useless
 115 #define HCF_TRACE_ACTION        0x0000  // 0x0001
 116 #define HCF_TRACE_CNTL          0x0001  // 0x0002
 117 #define HCF_TRACE_DMA_RX_GET    0x0002  // 0x0004
 118 #define HCF_TRACE_DMA_RX_PUT    0x0003  // 0x0008
 119 #define HCF_TRACE_DMA_TX_GET    0x0004  // 0x0010
 120 #define HCF_TRACE_DMA_TX_PUT    0x0005  // 0x0020
 121 #define HCF_TRACE_GET_INFO      0x0006  // 0x0040
 122 #define HCF_TRACE_PUT_INFO      0x0007  // 0x0080
 123 #define HCF_TRACE_RCV_MSG       0x0008  // 0x0100
 124 #define HCF_TRACE_SEND_MSG      0x0009  // 0x0200
 125 #define HCF_TRACE_SERVICE_NIC   0x000A  // 0x0400
 126 // #define HCF_TRACE_           0x000C  // 0x1000
 127 // #define HCF_TRACE_           0x000D  // 0x2000
 128 // #define HCF_TRACE_           0x000E  // 0x4000
 129 // #define HCF_TRACE_           0x000F  // 0x8000
 130 //  ============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
 131 #define HCF_TRACE_ACTION_KLUDGE 0x0010  /* once you start introducing kludges there is no end to it
 132                                          * this is an escape to do not assert on re-entrancy problem caused
 133                                          * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
 134                                          */
 135 #define HCF_TRACE_STRIO         0x0020
 136 #define HCF_TRACE_ALLOC         0X0021
 137 #define HCF_TRACE_DL            0X0023
 138 #define HCF_TRACE_ISR_INFO      0X0024
 139 #define HCF_TRACE_CALIBRATE     0x0026
 140
 141 #define HCF_TRACE_CMD_CPL       0x0040
 142 #define HCF_TRACE_CMD_EXE       0x0041
 143 #define HCF_TRACE_GET_FID       0x0042
 144 #define HCF_TRACE_GET_FRAG      0x0043
 145 #define HCF_TRACE_INIT          0x0044
 146 #define HCF_TRACE_PUT_FRAG      0x0045
 147 #define HCF_TRACE_SETUP_BAP     0x0046
 148
 149 #define HCF_TRACE_EXIT          0x8000  // Keil C warns "long constant truncated to int"
 150
 151 //#define BAP_0                 HREG_DATA_0     //Used by DMA controller to access NIC RAM
 152 #define BAP_1                   HREG_DATA_1     //Used by HCF to access NIC RAM
 153
 154
 155 //************************* Hermes Receive/Transmit Frame Structures
 156 //HFS_STAT
 157 //see MMD.H for HFS_STAT_ERR
 158 #define     HFS_STAT_MSG_TYPE   0xE000  //Hermes reported Message Type
 159 #define     HFS_STAT_MIC_KEY_ID 0x1800  //MIC key used (if any)
 160 #define     HFS_STAT_1042       0x2000  //RFC1042 Encoded
 161 #define     HFS_STAT_TUNNEL     0x4000  //Bridge-Tunnel Encoded
 162 #define     HFS_STAT_WMP_MSG    0x6000  //WaveLAN-II Management Protocol Frame
 163 #if (HCF_TYPE) & HCF_TYPE_WPA
 164 #define     HFS_STAT_MIC        0x0010  //Frame contains MIC  //;? re-instate when F/W ready
 165 #endif
 166
 167 //************************* Hermes Register Offsets and Command bits
 168 #define HREG_IO_RANGE           0x80        //I/O Range used by Hermes
 169
 170
 171 //************************* Command/Status
 172 #define HREG_CMD                0x00        //
 173 #define     HCMD_CMD_CODE           0x3F
 174 #define HREG_PARAM_0            0x02        //
 175 #define HREG_PARAM_1            0x04        //
 176 #define HREG_PARAM_2            0x06        //
 177 #define HREG_STAT               0x08        //
 178 #define     HREG_STAT_CMD_CODE      0x003F  //
 179 #define     HREG_STAT_DIAG_ERR      0x0100
 180 #define     HREG_STAT_INQUIRE_ERR   0x0500
 181 #define     HREG_STAT_CMD_RESULT    0x7F00  //
 182 #define HREG_RESP_0             0x0A        //
 183 #define HREG_RESP_1             0x0C        //
 184 #define HREG_RESP_2             0x0E        //
 185
 186
 187 //************************* FID Management
 188 #define HREG_INFO_FID           0x10        //
 189 #define HREG_RX_FID             0x20        //
 190 #define HREG_ALLOC_FID          0x22        //
 191 #define HREG_TX_COMPL_FID       0x24        //
 192
 193
 194 //************************* BAP
 195 //20031030 HWi Inserted this again because the dongle code uses this (GPIF.C)
 196 //#define HREG_SELECT_0         0x18        //
 197 //#define HREG_OFFSET_0         0x1C        //
 198 //#define HREG_DATA_0           0x36        //
 199
 200 //#define   HREG_OFFSET_BUSY        0x8000  // use HCMD_BUSY
 201 #define     HREG_OFFSET_ERR         0x4000  //
 202 //rsrvd #define     HREG_OFFSET_DATA_OFFSET 0x0FFF  //
 203
 204 #define HREG_SELECT_1           0x1A        //
 205 #define HREG_OFFSET_1           0x1E        //
 206 #define HREG_DATA_1             0x38        //
 207
 208
 209 //************************* Event
 210 #define HREG_EV_STAT            0x30        //
 211 #define HREG_INT_EN             0x32        //
 212 #define HREG_EV_ACK             0x34        //
 213
 214 #define    HREG_EV_TICK             0x8000  //Auxiliary Timer Tick
 215 //#define  HREG_EV_RES              0x4000  //H-I only: H/W error (Wait Time-out)
 216 #define    HREG_EV_INFO_DROP        0x2000  //WMAC did not have sufficient RAM to build Unsollicited Frame
 217 #if (HCF_TYPE) & HCF_TYPE_HII5
 218 #define    HREG_EV_ACK_REG_READY    0x0000
 219 #else
 220 #define    HREG_EV_ACK_REG_READY    0x1000  //Workaround Kludge bit for H-II (not H-II.5)
 221 #endif // HCF_TYPE_HII5
 222 #if (HCF_SLEEP) & ( HCF_CDS | HCF_DDS )
 223 #define    HREG_EV_SLEEP_REQ        0x0800
 224 #else
 225 #define    HREG_EV_SLEEP_REQ        0x0000
 226 #endif // HCF_CDS / HCF_DDS
 227 #if HCF_DMA
 228 //#define    HREG_EV_LPESC          0x0400 // firmware sets this bit and clears it, not for host usage.
 229 #define    HREG_EV_RDMAD            0x0200 // rx frame in host memory
 230 #define    HREG_EV_TDMAD            0x0100 // tx frame in host memory processed
 231 //#define    HREG_EV_RXDMA          0x0040 // firmware kicks off DMA engine (bit is not for host usage)
 232 //#define    HREG_EV_TXDMA          0x0020 // firmware kicks off DMA engine (bit is not for host usage)
 233 #define    HREG_EV_FW_DMA           0x0460 // firmware / DMA engine I/F (bits are not for host usage)
 234 #else
 235 #define    HREG_EV_FW_DMA           0x0000
 236 #endif // HCF_DMA
 237 #define    HREG_EV_INFO             0x0080  // Asynchronous Information Frame
 238 #define    HREG_EV_CMD              0x0010  // Command completed, Status and Response available
 239 #define    HREG_EV_ALLOC            0x0008  // Asynchronous part of Allocation/Reclaim completed
 240 #define    HREG_EV_TX_EXC           0x0004  // Asynchronous Transmission unsuccessful completed
 241 #define    HREG_EV_TX               0x0002  // Asynchronous Transmission successful completed
 242 #define    HREG_EV_RX               0x0001  // Asynchronous Receive Frame
 243
 244 #define    HREG_EV_TX_EXT           ( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
 245 /* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
 246  * could be extended with HREG_EV_TX */
 247 #if HCF_EXT_INT_TX_EX != HREG_EV_TX_EXC
 248 err: these values should match;
 249 #endif // HCF_EXT_INT_TX_EX / HREG_EV_TX_EXC
 250
 251 #if HCF_EXT_INT_TICK != HREG_EV_TICK
 252 err: these values should match;
 253 #endif // HCF_EXT_INT_TICK / HREG_EV_TICK
 254
 255 //************************* Host Software
 256 #define HREG_SW_0               0x28        //
 257 #define HREG_SW_1               0x2A        //
 258 #define HREG_SW_2               0x2C        //
 259 //rsrvd #define HREG_SW_3       0x2E        //
 260 //************************* Control and Auxiliary Port
 261
 262 #define HREG_IO                 0x12
 263 #define     HREG_IO_SRESET          0x0001
 264 #define     HREG_IO_WAKEUP_ASYNC    0x0002
 265 #define     HREG_IO_WOKEN_UP        0x0004
 266 #define HREG_CNTL               0x14        //
 267 //#define       HREG_CNTL_WAKEUP_SYNC   0x0001
 268 #define     HREG_CNTL_AUX_ENA_STAT  0xC000
 269 #define     HREG_CNTL_AUX_DIS_STAT  0x0000
 270 #define     HREG_CNTL_AUX_ENA_CNTL  0x8000
 271 #define     HREG_CNTL_AUX_DIS_CNTL  0x4000
 272 #define     HREG_CNTL_AUX_DSD       0x2000
 273 #define     HREG_CNTL_AUX_ENA       (HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
 274 #define HREG_SPARE              0x16        //
 275 #define HREG_AUX_PAGE           0x3A        //
 276 #define HREG_AUX_OFFSET         0x3C        //
 277 #define HREG_AUX_DATA           0x3E        //
 278
 279 #if HCF_DMA
 280 //************************* DMA (bus mastering)
 281 // Be careful to use these registers only at a genuine 32 bits NIC
 282 // On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
 283 // thereof, e.g.  HREG_DMA_CTRL register maps to HREG_CMD.
 284 #define HREG_DMA_CTRL                       0x0040
 285 #define HREG_TXDMA_PTR32                    0x0044
 286 #define HREG_TXDMA_PRIO_PTR32               0x0048
 287 #define HREG_TXDMA_HIPRIO_PTR32             0x004C
 288 #define HREG_RXDMA_PTR32                    0x0050
 289 #define HREG_CARDDETECT_1                   0x007C // contains 7D37
 290 #define HREG_CARDDETECT_2                   0x007E // contains 7DE7
 291 #define HREG_FREETIMER                      0x0058
 292 #define HREG_DMA_RX_CNT                     0x0026
 293
 294 /******************************************************************************
 295  * Defines for the bits in the DmaControl register (@40h)
 296  ******************************************************************************/
 297 #define HREG_DMA_CTRL_RXHWEN                0x80000000 // high word enable bit
 298 #define HREG_DMA_CTRL_RXRESET               0x40000000 // tx dma init bit
 299 #define HREG_DMA_CTRL_RXBAP1                BIT29
 300 #define HREG_DMA_CTRL_RX_STALLED            BIT28
 301 #define HREG_DMA_CTRL_RXAUTOACK_DMADONE     BIT27 // no host involvement req. for TDMADONE event
 302 #define HREG_DMA_CTRL_RXAUTOACK_INFO        BIT26 // no host involvement req. for alloc event
 303 #define HREG_DMA_CTRL_RXAUTOACK_DMAEN       0x02000000 // no host involvement req. for TxDMAen event
 304 #define HREG_DMA_CTRL_RXAUTOACK_RX          0x01000000 // no host involvement req. for tx event
 305 #define HREG_DMA_CTRL_RX_BUSY               BIT23 // read only bit
 306 //#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN       0     // bits 21..20
 307 //#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA       0     // mode 0
 308 #define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET 0x00010000 // mode 1
 309 #define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET  0x00020000 // mode 2
 310 //#define HREG_DMA_CTRL_RX_MODE_DISABLE     (0x00020000|0x00010000) // disable tx dma engine
 311 #define HREG_DMA_CTRL_TXHWEN                0x8000 // low word enable bit
 312 #define HREG_DMA_CTRL_TXRESET               0x4000 // rx dma init bit
 313 #define HREG_DMA_CTRL_TXBAP1                BIT13
 314 #define HREG_DMA_CTRL_TXAUTOACK_DMADONE     BIT11 // no host involvement req. for RxDMADONE event
 315 #define HREG_DMA_CTRL_TXAUTOACK_DMAEN       0x00000400 // no host involvement req. for RxDMAen event
 316 #define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC    0x00000200  // no host involvement req. for info event
 317 #define HREG_DMA_CTRL_TXAUTOACK_TX          0x00000100  // no host involvement req. for rx event
 318 #define HREG_DMA_CTRL_TX_BUSY               BIT7  // read only bit
 319 //#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN       0     // bits 6..5
 320 //#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA       0     // mode 0
 321 #define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET BIT0 // mode 1
 322 #define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET  0x00000002 // mode 2
 323 //#define HREG_DMA_CTRL_TX_MODE_DISABLE     (0x00000001|0x00000002) // disable tx dma engine
 324
 325 //configuration DWORD to configure DMA for mode2 operation, using BAP0 as the DMA BAP.
 326 #define DMA_CTRLSTAT_GO (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RX_MODE_MULTI_PACKET | \
 327                          HREG_DMA_CTRL_RXAUTOACK_DMAEN | HREG_DMA_CTRL_RXAUTOACK_RX | \
 328                          HREG_DMA_CTRL_TXHWEN | /*;?HREG_DMA_CTRL_TX_TBUFCONT_PLAIN |*/ \
 329                          HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN | \
 330                          HREG_DMA_CTRL_TXAUTOACK_DMAALLOC)
 331
 332 //configuration DWORD to reset both the Tx and Rx DMA engines
 333 #define DMA_CTRLSTAT_RESET (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RXRESET | HREG_DMA_CTRL_TXHWEN | HREG_DMA_CTRL_TXRESET)
 334
 335 //#define DESC_DMA_OWNED            0x80000000                  // BIT31
 336 #define DESC_DMA_OWNED          0x8000                      // BIT31
 337 #define DESC_SOP                0x8000                      // BIT15
 338 #define DESC_EOP                0x4000                      // BIT14
 339
 340 #define DMA_RX              0
 341 #define DMA_TX              1
 342
 343 // #define IFB_RxFirstDesc      IFB_FirstDesc[DMA_RX]
 344 // #define IFB_TxFirstDesc      IFB_FirstDesc[DMA_TX]
 345 // #define IFB_RxLastDesc       IFB_LastDesc[DMA_RX]
 346 // #define IFB_TxLastDesc       IFB_LastDesc[DMA_TX]
 347
 348 #endif // HCF_DMA
 349 //
 350 /************************************************************************************************/
 351 /**********************************  EQUATES  ***************************************************/
 352 /************************************************************************************************/
 353
 354
 355 // Hermes Command Codes and Qualifier bits
 356 #define     HCMD_BUSY           0x8000  // Busy bit, applicable for all commands
 357 #define HCMD_INI                0x0000  //
 358 #define HCMD_ENABLE             HCF_CNTL_ENABLE     // 0x0001
 359 #define HCMD_DISABLE            HCF_CNTL_DISABLE    // 0x0002
 360 #define HCMD_CONNECT            HCF_CNTL_CONNECT    // 0x0003
 361 #define HCMD_EXECUTE            0x0004  //
 362 #define HCMD_DISCONNECT         HCF_CNTL_DISCONNECT // 0x0005
 363 #define HCMD_SLEEP              0x0006  //
 364 #define HCMD_CONTINUE           HCF_CNTL_CONTINUE   // 0x0007
 365 #define     HCMD_RETRY          0x0100  // Retry bit
 366 #define HCMD_ALLOC              0x000A  //
 367 #define HCMD_TX                 0x000B  //
 368 #define     HCMD_RECL           0x0100  // Reclaim bit, applicable for Tx and Inquire
 369 #define HCMD_INQUIRE            0x0011  //
 370 #define HCMD_ACCESS             0x0021  //
 371 #define     HCMD_ACCESS_WRITE   0x0100  // Write bit
 372 #define HCMD_PROGRAM            0x0022  //
 373 #define HCMD_READ_MIF           0x0030
 374 #define HCMD_WRITE_MIF          0x0031
 375 #define HCMD_THESEUS            0x0038
 376 #define     HCMD_STARTPREAMBLE  0x0E00  // Start continuous preamble Tx
 377 #define     HCMD_STOP           0x0F00  // Stop Theseus test mode
 378
 379
 380 //Configuration Management
 381 //
 382
 383 #define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM 1   // Default Bottom Compatibility for Primary Firmware - driver I/F
 384 #define CFG_DRV_ACT_RANGES_PRI_3_TOP    1   // Default Top    Compatibility for Primary Firmware - driver I/F
 385
 386 #define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM 1   // Default Bottom Compatibility for H/W - driver I/F
 387 #define CFG_DRV_ACT_RANGES_HSI_4_TOP    1   // Default Top    Compatibility for H/W - driver I/F
 388
 389 #define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM 1   // Default Bottom Compatibility for H/W - driver I/F
 390 #define CFG_DRV_ACT_RANGES_HSI_5_TOP    1   // Default Top    Compatibility for H/W - driver I/F
 391
 392 #if (HCF_TYPE) & HCF_TYPE_WPA
 393 #define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 16  // Default Bottom Compatibility for AP Firmware - driver I/F
 394 #define CFG_DRV_ACT_RANGES_APF_1_TOP    16  // Default Top    Compatibility for AP Firmware - driver I/F
 395 #else  //;? is this REALLY O.K.
 396 #define CFG_DRV_ACT_RANGES_APF_1_BOTTOM 1   // Default Bottom Compatibility for AP Firmware - driver I/F
 397 #define CFG_DRV_ACT_RANGES_APF_1_TOP    1   // Default Top    Compatibility for AP Firmware - driver I/F
 398 #endif // HCF_TYPE_WPA
 399
 400 #define CFG_DRV_ACT_RANGES_APF_2_BOTTOM 2   // Default Bottom Compatibility for AP Firmware - driver I/F
 401 #define CFG_DRV_ACT_RANGES_APF_2_TOP    2   // Default Top    Compatibility for AP Firmware - driver I/F
 402
 403 #define CFG_DRV_ACT_RANGES_APF_3_BOTTOM 1   // Default Bottom Compatibility for AP Firmware - driver I/F
 404 #define CFG_DRV_ACT_RANGES_APF_3_TOP    1   // Default Top    Compatibility for AP Firmware - driver I/F
 405
 406 #define CFG_DRV_ACT_RANGES_APF_4_BOTTOM 1   // Default Bottom Compatibility for AP Firmware - driver I/F
 407 #define CFG_DRV_ACT_RANGES_APF_4_TOP    1   // Default Top    Compatibility for AP Firmware - driver I/F
 408
 409 #if (HCF_TYPE) & HCF_TYPE_HII5
 410 #define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 6   // Default Bottom Compatibility for Station Firmware - driver I/F
 411 #define CFG_DRV_ACT_RANGES_STA_2_TOP    6   // Default Top    Compatibility for Station Firmware - driver I/F
 412 #else // (HCF_TYPE) & HCF_TYPE_HII5
 413 #define CFG_DRV_ACT_RANGES_STA_2_BOTTOM 1   // Default Bottom Compatibility for Station Firmware - driver I/F
 414 #define CFG_DRV_ACT_RANGES_STA_2_TOP    2   // Default Top    Compatibility for Station Firmware - driver I/F
 415 #endif // (HCF_TYPE) & HCF_TYPE_HII5
 416
 417 #define CFG_DRV_ACT_RANGES_STA_3_BOTTOM 1   // Default Bottom Compatibility for Station Firmware - driver I/F
 418 #define CFG_DRV_ACT_RANGES_STA_3_TOP    1   // Default Top    Compatibility for Station Firmware - driver I/F
 419
 420 #define CFG_DRV_ACT_RANGES_STA_4_BOTTOM 1   // Default Bottom Compatibility for Station Firmware - driver I/F
 421 #define CFG_DRV_ACT_RANGES_STA_4_TOP    1   // Default Top    Compatibility for Station Firmware - driver I/F
 422
 423 //---------------------------------------------------------------------------------------------------------------------
 424 #if defined HCF_CFG_PRI_1_TOP || defined HCF_CFG_PRI_1_BOTTOM
 425 err: PRI_1 not supported for H-I;   // Compatibility for Primary Firmware - driver I/F
 426 #endif // HCF_CFG_PRI_1_TOP / HCF_CFG_PRI_1_BOTTOM
 427
 428 #if defined HCF_CFG_PRI_2_TOP || defined HCF_CFG_PRI_2_BOTTOM
 429 err: PRI_2 not supported for H-I;   // Compatibility for Primary Firmware - driver I/F
 430 #endif // HCF_CFG_PRI_2_TOP / HCF_CFG_PRI_2_BOTTOM
 431
 432 #ifdef HCF_CFG_PRI_3_TOP                                    // Top Compatibility for Primary Firmware - driver I/F
 433 #if HCF_CFG_PRI_3_TOP == 0 ||                                           \
 434         CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_TOP && HCF_CFG_PRI_3_TOP <= CFG_DRV_ACT_RANGES_PRI_3_TOP
 435 #undef CFG_DRV_ACT_RANGES_PRI_3_TOP
 436 #define CFG_DRV_ACT_RANGES_PRI_3_TOP    HCF_CFG_PRI_3_TOP
 437 #else
 438 err: ;
 439 #endif
 440 #endif // HCF_CFG_PRI_3_TOP
 441
 442 #ifdef HCF_CFG_PRI_3_BOTTOM                                 // Bottom Compatibility for Primary Firmware - driver I/F
 443 #if CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_BOTTOM && HCF_CFG_PRI_3_BOTTOM <= CFG_DRV_ACT_RANGES_PRI_3_TOP
 444 #undef CFG_DRV_ACT_RANGES_PRI_3_BOTTOM
 445 #define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM HCF_CFG_PRI_3_BOTTOM
 446 #else
 447 err: ;
 448 #endif
 449 #endif // HCF_CFG_PRI_3_BOTTOM
 450
 451
 452 //---------------------------------------------------------------------------------------------------------------------
 453 #if defined HCF_CFG_HSI_0_TOP || defined HCF_CFG_HSI_0_BOTTOM
 454 err: HSI_0 not supported for H-I;   // Compatibility for HSI I/F
 455 #endif // HCF_CFG_HSI_0_TOP / HCF_CFG_HSI_0_BOTTOM
 456
 457 #if defined HCF_CFG_HSI_1_TOP || defined HCF_CFG_HSI_1_BOTTOM
 458 err: HSI_1 not supported for H-I;   // Compatibility for HSI I/F
 459 #endif // HCF_CFG_HSI_1_TOP / HCF_CFG_HSI_1_BOTTOM
 460
 461 #if defined HCF_CFG_HSI_2_TOP || defined HCF_CFG_HSI_2_BOTTOM
 462 err: HSI_2 not supported for H-I;   // Compatibility for HSI I/F
 463 #endif // HCF_CFG_HSI_2_TOP / HCF_CFG_HSI_2_BOTTOM
 464
 465 #if defined HCF_CFG_HSI_3_TOP || defined HCF_CFG_HSI_3_BOTTOM
 466 err: HSI_3 not supported for H-I;   // Compatibility for HSI I/F
 467 #endif // HCF_CFG_HSI_3_TOP / HCF_CFG_HSI_3_BOTTOM
 468
 469 #ifdef HCF_CFG_HSI_4_TOP                                    // Top Compatibility for HSI I/F
 470 #if HCF_CFG_HSI_4_TOP == 0 ||                                           \
 471         CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= CF_CFG_HSI_4_TOP && HCF_CFG_HSI_4_TOP <= CFG_DRV_ACT_RANGES_HSI_4_TOP
 472 #undef CFG_DRV_ACT_RANGES_HSI_4_TOP
 473 #define CFG_DRV_ACT_RANGES_HSI_4_TOP    HCF_CFG_HSI_4_TOP
 474 #else
 475 err: ;
 476 #endif
 477 #endif // HCF_CFG_HSI_4_TOP
 478
 479 #ifdef HCF_CFG_HSI_4_BOTTOM                             // Bottom Compatibility for HSI I/F
 480 #if CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= HCF_CFG_HSI_4_BOTTOM && HCF_CFG_HSI_4_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_4_TOP
 481 #undef CFG_DRV_ACT_RANGES_HSI_4_BOTTOM
 482 #define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM HCF_CFG_HSI_4_BOTTOM
 483 #else
 484 err: ;
 485 #endif
 486 #endif // HCF_CFG_HSI_4_BOTTOM
 487
 488 #ifdef HCF_CFG_HSI_5_TOP                                    // Top Compatibility for HSI I/F
 489 #if HCF_CFG_HSI_5_TOP == 0 ||                                           \
 490         CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= CF_CFG_HSI_5_TOP && HCF_CFG_HSI_5_TOP <= CFG_DRV_ACT_RANGES_HSI_5_TOP
 491 #undef CFG_DRV_ACT_RANGES_HSI_5_TOP
 492 #define CFG_DRV_ACT_RANGES_HSI_5_TOP    HCF_CFG_HSI_5_TOP
 493 #else
 494 err: ;
 495 #endif
 496 #endif // HCF_CFG_HSI_5_TOP
 497
 498 #ifdef HCF_CFG_HSI_5_BOTTOM                             // Bottom Compatibility for HSI I/F
 499 #if CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= HCF_CFG_HSI_5_BOTTOM && HCF_CFG_HSI_5_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_5_TOP
 500 #undef CFG_DRV_ACT_RANGES_HSI_5_BOTTOM
 501 #define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM HCF_CFG_HSI_5_BOTTOM
 502 #else
 503 err: ;
 504 #endif
 505 #endif // HCF_CFG_HSI_5_BOTTOM
 506 //---------------------------------------------------------------------------------------------------------------------
 507 #if defined HCF_CFG_APF_1_TOP || defined HCF_CFG_APF_1_BOTTOM
 508 err: APF_1 not supported for H-I;   // Compatibility for AP Firmware - driver I/F
 509 #endif // HCF_CFG_APF_1_TOP / HCF_CFG_APF_1_BOTTOM
 510
 511 #ifdef HCF_CFG_APF_2_TOP                                    // Top Compatibility for AP Firmware - driver I/F
 512 #if HCF_CFG_APF_2_TOP == 0 ||                                           \
 513         CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_TOP && HCF_CFG_APF_2_TOP <= CFG_DRV_ACT_RANGES_APF_2_TOP
 514 #undef CFG_DRV_ACT_RANGES_APF_2_TOP
 515 #define CFG_DRV_ACT_RANGES_APF_2_TOP    HCF_CFG_APF_2_TOP
 516 #else
 517 err: ;
 518 #endif
 519 #endif // HCF_CFG_APF_TOP
 520
 521 #ifdef HCF_CFG_APF_2_BOTTOM                                 // Bottom Compatibility for AP Firmware - driver I/F
 522 #if CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_BOTTOM && HCF_CFG_APF_2_BOTTOM <= CFG_DRV_ACT_RANGES_APF_2_TOP
 523 #undef CFG_DRV_ACT_RANGES_APF_2_BOTTOM
 524 #define CFG_DRV_ACT_RANGES_APF_2_BOTTOM HCF_CFG_APF_2_BOTTOM
 525 #else
 526 err: ;
 527 #endif
 528 #endif // HCF_CFG_APF_BOTTOM
 529
 530 //---------------------------------------------------------------------------------------------------------------------
 531 #if defined HCF_CFG_STA_1_TOP || defined HCF_CFG_STA_1_BOTTOM
 532 err: STA_1 not supported for H-I;   // Compatibility for Station Firmware - driver I/F
 533 #endif // HCF_CFG_STA_1_TOP / HCF_CFG_STA_1_BOTTOM
 534
 535 #ifdef HCF_CFG_STA_2_TOP                                    // Top Compatibility for Station Firmware - driver I/F
 536 #if HCF_CFG_STA_2_TOP == 0 ||                                           \
 537         CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_TOP && HCF_CFG_STA_2_TOP <= CFG_DRV_ACT_RANGES_STA_2_TOP
 538 #undef CFG_DRV_ACT_RANGES_STA_2_TOP
 539 #define CFG_DRV_ACT_RANGES_STA_2_TOP    HCF_CFG_STA_2_TOP
 540 #else
 541 err: ;
 542 #endif
 543 #endif // HCF_CFG_STA_TOP
 544
 545 #ifdef HCF_CFG_STA_2_BOTTOM                                 // Bottom Compatibility for Station Firmware - driver I/F
 546 #if CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_BOTTOM && HCF_CFG_STA_2_BOTTOM <= CFG_DRV_ACT_RANGES_STA_2_TOP
 547 #undef CFG_DRV_ACT_RANGES_STA_2_BOTTOM
 548 #define CFG_DRV_ACT_RANGES_STA_2_BOTTOM HCF_CFG_STA_2_BOTTOM
 549 #else
 550 err: ;
 551 #endif
 552 #endif // HCF_CFG_STA_BOTTOM
 553
 554
 555 /************************************************************************************************/
 556 /**************************************  MACROS  ************************************************/
 557 /************************************************************************************************/
 558
 559 #ifdef HCF_SLEEP
 560 #define MSF_WAIT(x) do {                                                \
 561                 PROT_CNT_INI;                                           \
 562                 HCF_WAIT_WHILE((IPW(HREG_IO) & HREG_IO_WOKEN_UP) == 0); \
 563                 HCFASSERT( prot_cnt, IPW( HREG_IO ) );                  \
 564         } while (0)
 565 #else
 566 #define MSF_WAIT(x) do { } while (0)
 567 #endif // HCF_SLEEP
 568
 569 #define LOF(x)          (sizeof(x)/sizeof(hcf_16)-1)
 570
 571 //resolve problems on for some 16 bits compilers to create 32 bit values
 572 #define MERGE_2( hw, lw )   ( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )
 573
 574 #if ! defined HCF_STATIC
 575 #define       HCF_STATIC    static
 576 #endif //     HCF_STATIC
 577
 578 #if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0
 579 #define DAWA_ACK( mask) do {                                            \
 580                 OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY );       \
 581                 OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); \
 582         } while (0)
 583 #define DAWA_ZERO_FID(reg) OPW( reg, 0 )
 584 #else
 585 #define DAWA_ACK( mask)   OPW( HREG_EV_ACK, mask )
 586 #define DAWA_ZERO_FID(reg) do { } while (0)
 587 #endif // HCF_TYPE_HII5
 588
 589 #if (HCF_TYPE) & HCF_TYPE_WPA
 590 #define CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
 591 #define CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
 592 #else
 593 #define CALC_RX_MIC( p, len )
 594 #define CALC_TX_MIC( p, len )
 595 #define MIC_RX_RTN( mic, dw )
 596 #define MIC_TX_RTN( mic, dw )
 597 #endif // HCF_TYPE_WPA
 598
 599 #if HCF_TALLIES & HCF_TALLIES_HCF       //HCF tally support
 600 #define IF_TALLY(x) do { x; } while (0)
 601 #else
 602 #define IF_TALLY(x) do { } while (0)
 603 #endif // HCF_TALLIES_HCF
 604
 605
 606 #if HCF_DMA
 607 #define IF_DMA(x)           do { x; } while(0)
 608 #define IF_NOT_DMA(x)       do { } while(0)
 609 #define IF_USE_DMA(x)       if (   ifbp->IFB_CntlOpt & USE_DMA  ) { x; }
 610 #define IF_NOT_USE_DMA(x)   if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) { x; }
 611 #else
 612 #define IF_DMA(x)           do { } while(0)
 613 #define IF_NOT_DMA(x)       do { x; } while(0)
 614 #define IF_USE_DMA(x)       do { } while(0)
 615 #define IF_NOT_USE_DMA(x)   do { x; } while(0)
 616 #endif // HCF_DMA
 617
 618
 619 #define IPW(x) ((hcf_16)IN_PORT_WORD( ifbp->IFB_IOBase + (x) ) )
 620 #define OPW(x, y) OUT_PORT_WORD( ifbp->IFB_IOBase + (x), y )
 621 /* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
 622  * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
 623  */
 624 #if HCF_PROT_TIME == 0
 625 #define PROT_CNT_INI    do { } while(0)
 626 #define IF_PROT_TIME(x) do { } while(0)
 627 #if defined HCF_YIELD
 628 #define HCF_WAIT_WHILE( x ) do { } while( (x) && (HCF_YIELD) )
 629 #else
 630 #define HCF_WAIT_WHILE( x ) do { } while ( x )
 631 #endif // HCF_YIELD
 632 #else
 633 #define PROT_CNT_INI    hcf_32 prot_cnt = ifbp->IFB_TickIni
 634 #define IF_PROT_TIME(x) do { x; } while(0)
 635 #if defined HCF_YIELD
 636 #define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) && (HCF_YIELD) ) prot_cnt--;
 637 #else
 638 #include <linux/delay.h>
 639 #define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) ) { udelay(2); prot_cnt--; }
 640 #endif // HCF_YIELD
 641 #endif // HCF_PROT_TIME
 642
 643 #if defined HCF_EX_INT
 644 //#if HCF_EX_INT & ~( HCF_EX_INT_TX_EX | HCF_EX_INT_TX_OK | HCF_EX_INT_TICK )
 645 ;? out dated checking
 646 err: you used an invalid bitmask;
 647 // #endif // HCF_EX_INT validation
 648 // #else
 649 // #define HCF_EX_INT 0x000
 650 #endif // HCF_EX_INT
 651
 652 #if 0 //get compiler going
 653 #if HCF_EX_INT_TICK != HREG_EV_TICK
 654 ;? out dated checking
 655 err: someone redefined these macros while the implemenation assumes they are equal;
 656 #endif
 657 #if HCF_EX_INT_TX_OK != HFS_TX_CNTL_TX_OK || HFS_TX_CNTL_TX_OK != HREG_EV_TX_OK
 658 ;? out dated checking
 659 err: someone redefined these macros while the implemenation assumes they are equal;
 660 #endif
 661 #if HCF_EX_INT_TX_EX != HFS_TX_CNTL_TX_EX || HFS_TX_CNTL_TX_EX != HREG_EV_TX_EX
 662 ;? out dated checking
 663 err: someone redefined these macros while the implemenation assumes they are equal;
 664 #endif
 665 #endif // 0 get compiler going
 666
 667
 668 /* The assert in HCFLOGENTRY checks against re-entrancy. Re-entrancy could be caused by MSF logic at
 669  * task-level calling hcf_functions without shielding with HCF_ACT_ON/_OFF. When an interrupt occurs,
 670  * the ISR could (either directly or indirectly) cause re-entering of the interrupted HCF-routine.
 671  *
 672  * The "(ifbp->IFB_AssertWhere = where)" test in HCFLOGENTRY services ALSO as a statement to get around:
 673  * #pragma warning: conditional expression is constant
 674  * on the if-statement
 675  */
 676 #if HCF_ASSERT
 677 #define HCFASSERT(x,q) do { if (!(x)) {mdd_assert(ifbp, __LINE__, q );} } while(0)
 678 #define MMDASSERT(x,q) {if (!(x)) {mdd_assert( assert_ifbp, __LINE__ + FILE_NAME_OFFSET, q );}}
 679
 680 #define HCFLOGENTRY( where, what ) do {                                 \
 681                 if ( (ifbp->IFB_AssertWhere = where) <= 15 ) {          \
 682                         HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace ); \
 683                         ifbp->IFB_AssertTrace |= 1<<((where)&0xF);      \
 684                 }                                                       \
 685                 HCFTRACE(ifbp, where );                                 \
 686                 HCFTRACEVALUE(ifbp, what );                             \
 687         } while (0)
 688
 689 #define HCFLOGEXIT( where ) do {                                        \
 690                 if ( (ifbp->IFB_AssertWhere = where) <= 15 ) {          \
 691                         ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF));   \
 692                 }                                                       \
 693                 HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT );                \
 694         } while (0)
 695
 696 #else // HCF_ASSERT
 697 #define HCFASSERT( x, q ) do { } while(0)
 698 #define MMDASSERT( x, q )
 699 #define HCFLOGENTRY( where, what ) do { } while(0)
 700 #define HCFLOGEXIT( where )        do { } while(0)
 701 #endif // HCF_ASSERT
 702
 703 #if HCF_INT_ON
 704 /* ;? HCFASSERT_INT
 705  * #if (HCF_SLEEP) & HCF_DDS
 706  * #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF && ifbp->IFB_IntOffCnt != 0xFFFE, \
 707  *                               ifbp->IFB_IntOffCnt )
 708  * #else
 709  */
 710 #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF, ifbp->IFB_IntOffCnt )
 711 // #endif // HCF_DDS
 712 #else
 713 #define HCFASSERT_INT
 714 #endif // HCF_INT_ON
 715
 716
 717 #if defined HCF_TRACE
 718 #define HCFTRACE(ifbp, where )     do {OPW( HREG_SW_1, where );} while(0)
 719 //#define HCFTRACE(ifbp, where )       {HCFASSERT( DO_ASSERT, where );}
 720 #define HCFTRACEVALUE(ifbp, what ) do {OPW( HREG_SW_2, what  );} while (0)
 721 //#define HCFTRACEVALUE(ifbp, what ) {HCFASSERT( DO_ASSERT, what  );}
 722 #else
 723 #define HCFTRACE(ifbp, where )     do { } while(0)
 724 #define HCFTRACEVALUE(ifbp, what ) do { } while(0)
 725 #endif // HCF_TRACE
 726
 727
 728 #if HCF_BIG_ENDIAN
 729 #define BE_PAR(x)               ,x
 730 #else
 731 #define BE_PAR(x)
 732 #endif // HCF_BIG_ENDIAN
 733
 734 /************************************************************************************************/
 735 /**************************************  END OF MACROS  *****************************************/
 736 /************************************************************************************************/
 737
 738 /************************************************************************************************/
 739 /***************************************  PROTOTYPES  *******************************************/
 740 /************************************************************************************************/
 741
 742 #if HCF_ASSERT
 743 extern IFBP BASED assert_ifbp;          //to make asserts easily work under MMD and DHF
 744 EXTERN_C void        mdd_assert         (IFBP ifbp, unsigned int line_number, hcf_32 q );
 745 #endif //HCF_ASSERT
 746
 747 #if ! ( (HCF_IO) & HCF_IO_32BITS )              // defined 16 bits only
 748 #undef OUT_PORT_STRING_32
 749 #undef IN_PORT_STRING_32
 750 #endif // HCF_IO
 751 #endif  //HCFDEFC_H
 752