i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / staging / wlags49_h2 / mmd.c
blobc8f52107e6cac57f668a5e13e200fab30d546c94
2 // vim:tw=110:ts=4:
3 /************************************************************************************************************
5 * FILE : mmd.c
7 * DATE : $Date: 2004/07/23 11:57:45 $ $Revision: 1.4 $
8 * Original: 2004/05/28 14:05:35 Revision: 1.32 Tag: hcf7_t20040602_01
9 * Original: 2004/05/13 15:31:45 Revision: 1.30 Tag: hcf7_t7_20040513_01
10 * Original: 2004/04/15 09:24:42 Revision: 1.25 Tag: hcf7_t7_20040415_01
11 * Original: 2004/04/08 15:18:17 Revision: 1.24 Tag: t7_20040413_01
12 * Original: 2004/04/01 15:32:55 Revision: 1.22 Tag: t7_20040401_01
13 * Original: 2004/03/10 15:39:28 Revision: 1.18 Tag: t20040310_01
14 * Original: 2004/03/03 14:10:12 Revision: 1.16 Tag: t20040304_01
15 * Original: 2004/03/02 09:27:12 Revision: 1.14 Tag: t20040302_03
16 * Original: 2004/02/24 13:00:29 Revision: 1.12 Tag: t20040224_01
17 * Original: 2004/01/30 09:59:33 Revision: 1.11 Tag: t20040219_01
19 * AUTHOR : Nico Valster
21 * DESC : Common routines for HCF, MSF, UIL as well as USF sources
23 * Note: relative to Asserts, the following can be observed:
24 * Since the IFB is not known inside the routine, the macro HCFASSERT is replaced with MDDASSERT.
25 * Also the line number reported in the assert is raised by FILE_NAME_OFFSET (20000) to discriminate the
26 * MMD Asserts from HCF and DHF asserts.
28 ***************************************************************************************************************
31 * SOFTWARE LICENSE
33 * This software is provided subject to the following terms and conditions,
34 * which you should read carefully before using the software. Using this
35 * software indicates your acceptance of these terms and conditions. If you do
36 * not agree with these terms and conditions, do not use the software.
38 * COPYRIGHT © 2001 - 2004 by Agere Systems Inc. All Rights Reserved
39 * All rights reserved.
41 * Redistribution and use in source or binary forms, with or without
42 * modifications, are permitted provided that the following conditions are met:
44 * . Redistributions of source code must retain the above copyright notice, this
45 * list of conditions and the following Disclaimer as comments in the code as
46 * well as in the documentation and/or other materials provided with the
47 * distribution.
49 * . Redistributions in binary form must reproduce the above copyright notice,
50 * this list of conditions and the following Disclaimer in the documentation
51 * and/or other materials provided with the distribution.
53 * . Neither the name of Agere Systems Inc. nor the names of the contributors
54 * may be used to endorse or promote products derived from this software
55 * without specific prior written permission.
57 * Disclaimer
59 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
60 * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
61 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY
62 * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
63 * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
64 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
65 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
66 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
67 * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
68 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
69 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
70 * DAMAGE.
73 **************************************************************************************************************/
75 #include "hcf.h" // Needed as long as we do not really sort out the mess
76 #include "hcfdef.h" // get CNV_LITTLE_TO_SHORT
77 #include "mmd.h" // MoreModularDriver common include file
79 //to distinguish DHF from HCF asserts by means of line number
80 #undef FILE_NAME_OFFSET
81 #define FILE_NAME_OFFSET DHF_FILE_NAME_OFFSET
84 /*************************************************************************************************************
86 *.MODULE CFG_RANGE_SPEC_STRCT* mmd_check_comp( CFG_RANGES_STRCT *actp, CFG_SUP_RANGE_STRCT *supp )
87 *.PURPOSE Checks compatibility between an actor and a supplier.
89 *.ARGUMENTS
90 * actp
91 * supp
93 *.RETURNS
94 * NULL incompatible
95 * <>NULL pointer to matching CFG_RANGE_SPEC_STRCT substructure in actor-structure matching the supplier
97 *.NARRATIVE
99 * Parameters:
100 * actp address of the actor specification
101 * supp address of the supplier specification
103 * Description: mmd_check_comp is a support routine to check the compatibility between an actor and a
104 * supplier. mmd_check_comp is independent of the endianess of the actp and supp structures. This is
105 * achieved by checking the "bottom" or "role" fields of these structures. Since these fields are restricted
106 * to a limited range, comparing the contents to a value with a known endian-ess gives a clue to their actual
107 * endianess.
109 *.DIAGRAM
110 *1a: The role-field of the actor structure has a known non-zero, not "byte symmetric" value (namely
111 * COMP_ROLE_ACT or 0x0001), so if and only the contents of this field matches COMP_ROLE_ACT (in Native
112 * Endian format), the actor structure is Native Endian.
113 *2a: Since the role-field of the supplier structure is 0x0000, the test as used for the actor does not work
114 * for a supplier. A supplier has always exactly 1 variant,top,bottom record with (officially, but see the
115 * note below) each of these 3 values in the range 1 through 99, so one byte of the word value of variant,
116 * top and bottom words is 0x00 and the other byte is non-zero. Whether the lowest address byte or the
117 * highest address byte is non-zero depends on the Endianess of the LTV. If and only if the word value of
118 * bottom is less than 0x0100, the supplier is Native Endian.
119 * NOTE: the variant field of the supplier structure can not be used for the Endian Detection Algorithm,
120 * because a a zero-valued variant has been used as Controlled Deployment indication in the past.
121 * Note: An actor may have multiple sets of variant,top,bottom records, including dummy sets with variant,
122 * top and bottom fields with a zero-value. As a consequence the endianess of the actor can not be determined
123 * based on its variant,top,bottom values.
125 * Note: the L and T field of the structures are always in Native Endian format, so you can not draw
126 * conclusions concerning the Endianess of the structure based on these two fields.
128 *1b/2b
129 * The only purpose of the CFG_RANGE_SPEC_BYTE_STRCT is to give easy access to the non-zero byte of the word
130 * value of variant, top and bottom. The variables sup_endian and act_endian are used for the supplier and
131 * actor structure respectively. These variables must be 0 when the structure has LE format and 1 if the
132 * structure has BE format. This can be phrased as:
133 * the variable is false (i.e 0x0000) if either
134 * (the platform is LE and the LTV is the same as the platform)
135 * or
136 * (the platform is BE and the LTV differs from the platform).
137 * the variable is true (i.e 0x0001) if either
138 * (the platform is BE and the LTV is the same as the platform)
139 * or
140 * (the platform is LE and the LTV differs from the platform).
142 * Alternatively this can be phrased as:
143 * if the platform is LE
144 * if the LTV is LE (i.e the same as the platform), then the variable = 0
145 * else (the LTV is BE (i.e. different from the platform) ), then the variable = 1
146 * if the platform is BE
147 * if the LTV is BE (i.e the same as the platform), then the variable = 1
148 * else (the LTV is LE (i.e. different from the platform) ), then the variable = 0
150 * This is implemented as:
151 * #if HCF_BIG_ENDIAN == 0 //platform is LE
152 * sup/act_endian becomes reverse of structure-endianess as determined in 1a/1b
153 * #endif
154 *6: Each of the actor variant-bottom-top records is checked against the (single) supplier variant-bottom-top
155 * range till either an acceptable match is found or all actor records are tried. As explained above, due to
156 * the limited ranges of these values, checking a byte is acceptable and suitable.
157 *8: depending on whether a match was found or not (as reflected by the value of the control variable of the
158 * for loop), the NULL pointer or a pointer to the matching Number/Bottom/Top record of the Actor structure
159 * is returned.
160 * As an additional safety, checking the supplier length protects against invalid Supplier structures, which
161 * may be caused by failing hcf_get_info (in which case the len-field is zero). Note that the contraption
162 * "supp->len != sizeof(CFG_SUP_RANGE_STRCT)/sizeof(hcf_16) - 1"
163 * did turn out not to work for a compiler which padded the structure definition.
165 * Note: when consulting references like DesignNotes and Architecture specifications there is a confusing use
166 * of the notions number and variant. This resulted in an inconsistent use in the HCF nomenclature as well.
167 * This makes the logic hard to follow and one has to be very much aware of the context when walking through
168 * the code.
169 * NOTE: The Endian Detection Algorithm places limitations on future extensions of the fields, i.e. they should
170 * stay within the currently defined boundaries of 1 through 99 (although 1 through 255) would work as well
171 * and there should never be used a zero value for the bottom of a valid supplier.
172 * Note: relative to Asserts, the following can be observed:
173 * 1: Supplier variant 0x0000 has been used for Controlled Deployment
174 * 2: An actor may have one or more variant record specifications with a top of zero and a non-zero bottom
175 * to override the HCF default support of a particular variant by the MSF programmer via hcfcfg.h
176 * 3: An actor range can be specified as all zeros, e.g. as padding in the automatically generated firmware
177 * image files.
178 *.ENDDOC END DOCUMENTATION
179 *************************************************************************************************************/
180 CFG_RANGE_SPEC_STRCT*
181 mmd_check_comp( CFG_RANGES_STRCT *actp, CFG_SUP_RANGE_STRCT *supp )
184 CFG_RANGE_SPEC_BYTE_STRCT *actq = (CFG_RANGE_SPEC_BYTE_STRCT*)actp->var_rec;
185 CFG_RANGE_SPEC_BYTE_STRCT *supq = (CFG_RANGE_SPEC_BYTE_STRCT*)&(supp->variant);
186 hcf_16 i;
187 int act_endian; //actor endian flag
188 int sup_endian; //supplier endian flag
190 act_endian = actp->role == COMP_ROLE_ACT; //true if native endian /* 1a */
191 sup_endian = supp->bottom < 0x0100; //true if native endian /* 2a */
193 #if HCF_ASSERT
194 MMDASSERT( supp->len == 6, supp->len )
195 MMDASSERT( actp->len >= 6 && actp->len%3 == 0, actp->len )
197 if ( act_endian ) { //native endian
198 MMDASSERT( actp->role == COMP_ROLE_ACT, actp->role )
199 MMDASSERT( 1 <= actp->id && actp->id <= 99, actp->id )
200 } else { //non-native endian
201 MMDASSERT( actp->role == CNV_END_SHORT(COMP_ROLE_ACT), actp->role )
202 MMDASSERT( 1 <= CNV_END_SHORT(actp->id) && CNV_END_SHORT(actp->id) <= 99, actp->id )
204 if ( sup_endian ) { //native endian
205 MMDASSERT( supp->role == COMP_ROLE_SUPL, supp->role )
206 MMDASSERT( 1 <= supp->id && supp->id <= 99, supp->id )
207 MMDASSERT( 1 <= supp->variant && supp->variant <= 99, supp->variant )
208 MMDASSERT( 1 <= supp->bottom && supp->bottom <= 99, supp->bottom )
209 MMDASSERT( 1 <= supp->top && supp->top <= 99, supp->top )
210 MMDASSERT( supp->bottom <= supp->top, supp->bottom << 8 | supp->top )
211 } else { //non-native endian
212 MMDASSERT( supp->role == CNV_END_SHORT(COMP_ROLE_SUPL), supp->role )
213 MMDASSERT( 1 <= CNV_END_SHORT(supp->id) && CNV_END_SHORT(supp->id) <= 99, supp->id )
214 MMDASSERT( 1 <= CNV_END_SHORT(supp->variant) && CNV_END_SHORT(supp->variant) <= 99, supp->variant )
215 MMDASSERT( 1 <= CNV_END_SHORT(supp->bottom) && CNV_END_SHORT(supp->bottom) <=99, supp->bottom )
216 MMDASSERT( 1 <= CNV_END_SHORT(supp->top) && CNV_END_SHORT(supp->top) <=99, supp->top )
217 MMDASSERT( CNV_END_SHORT(supp->bottom) <= CNV_END_SHORT(supp->top), supp->bottom << 8 | supp->top )
219 #endif // HCF_ASSERT
221 #if HCF_BIG_ENDIAN == 0
222 act_endian = !act_endian; /* 1b*/
223 sup_endian = !sup_endian; /* 2b*/
224 #endif // HCF_BIG_ENDIAN
226 for ( i = actp->len ; i > 3; actq++, i -= 3 ) { /* 6 */
227 MMDASSERT( actq->variant[act_endian] <= 99, i<<8 | actq->variant[act_endian] )
228 MMDASSERT( actq->bottom[act_endian] <= 99 , i<<8 | actq->bottom[act_endian] )
229 MMDASSERT( actq->top[act_endian] <= 99 , i<<8 | actq->top[act_endian] )
230 MMDASSERT( actq->bottom[act_endian] <= actq->top[act_endian], i<<8 | actq->bottom[act_endian] )
231 if ( actq->variant[act_endian] == supq->variant[sup_endian] &&
232 actq->bottom[act_endian] <= supq->top[sup_endian] &&
233 actq->top[act_endian] >= supq->bottom[sup_endian]
234 ) break;
236 if ( i <= 3 || supp->len != 6 /*sizeof(CFG_SUP_RANGE_STRCT)/sizeof(hcf_16) - 1 */ ) {
237 actq = NULL; /* 8 */
239 #if HCF_ASSERT
240 if ( actq == NULL ) {
241 for ( i = 0; i <= supp->len; i += 2 ) {
242 MMDASSERT( DO_ASSERT, MERGE_2( ((hcf_16*)supp)[i], ((hcf_16*)supp)[i+1] ) );
244 for ( i = 0; i <= actp->len; i += 2 ) {
245 MMDASSERT( DO_ASSERT, MERGE_2( ((hcf_16*)actp)[i], ((hcf_16*)actp)[i+1] ) );
248 #endif // HCF_ASSERT
249 return (CFG_RANGE_SPEC_STRCT*)actq;
250 } // mmd_check_comp