i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / tty / n_hdlc.c
bloba09ce3ef5d748f9455ebba56b38aa97f097e8187
1 /* generic HDLC line discipline for Linux
3 * Written by Paul Fulghum paulkf@microgate.com
4 * for Microgate Corporation
6 * Microgate and SyncLink are registered trademarks of Microgate Corporation
8 * Adapted from ppp.c, written by Michael Callahan <callahan@maths.ox.ac.uk>,
9 * Al Longyear <longyear@netcom.com>,
10 * Paul Mackerras <Paul.Mackerras@cs.anu.edu.au>
12 * Original release 01/11/99
14 * This code is released under the GNU General Public License (GPL)
16 * This module implements the tty line discipline N_HDLC for use with
17 * tty device drivers that support bit-synchronous HDLC communications.
19 * All HDLC data is frame oriented which means:
21 * 1. tty write calls represent one complete transmit frame of data
22 * The device driver should accept the complete frame or none of
23 * the frame (busy) in the write method. Each write call should have
24 * a byte count in the range of 2-65535 bytes (2 is min HDLC frame
25 * with 1 addr byte and 1 ctrl byte). The max byte count of 65535
26 * should include any crc bytes required. For example, when using
27 * CCITT CRC32, 4 crc bytes are required, so the maximum size frame
28 * the application may transmit is limited to 65531 bytes. For CCITT
29 * CRC16, the maximum application frame size would be 65533.
32 * 2. receive callbacks from the device driver represents
33 * one received frame. The device driver should bypass
34 * the tty flip buffer and call the line discipline receive
35 * callback directly to avoid fragmenting or concatenating
36 * multiple frames into a single receive callback.
38 * The HDLC line discipline queues the receive frames in separate
39 * buffers so complete receive frames can be returned by the
40 * tty read calls.
42 * 3. tty read calls returns an entire frame of data or nothing.
44 * 4. all send and receive data is considered raw. No processing
45 * or translation is performed by the line discipline, regardless
46 * of the tty flags
48 * 5. When line discipline is queried for the amount of receive
49 * data available (FIOC), 0 is returned if no data available,
50 * otherwise the count of the next available frame is returned.
51 * (instead of the sum of all received frame counts).
53 * These conventions allow the standard tty programming interface
54 * to be used for synchronous HDLC applications when used with
55 * this line discipline (or another line discipline that is frame
56 * oriented such as N_PPP).
58 * The SyncLink driver (synclink.c) implements both asynchronous
59 * (using standard line discipline N_TTY) and synchronous HDLC
60 * (using N_HDLC) communications, with the latter using the above
61 * conventions.
63 * This implementation is very basic and does not maintain
64 * any statistics. The main point is to enforce the raw data
65 * and frame orientation of HDLC communications.
67 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
68 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
69 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
70 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
71 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
72 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
73 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
74 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
75 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
76 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
77 * OF THE POSSIBILITY OF SUCH DAMAGE.
80 #define HDLC_MAGIC 0x239e
82 #include <linux/module.h>
83 #include <linux/init.h>
84 #include <linux/kernel.h>
85 #include <linux/sched.h>
86 #include <linux/types.h>
87 #include <linux/fcntl.h>
88 #include <linux/interrupt.h>
89 #include <linux/ptrace.h>
91 #undef VERSION
92 #define VERSION(major,minor,patch) (((((major)<<8)+(minor))<<8)+(patch))
94 #include <linux/poll.h>
95 #include <linux/in.h>
96 #include <linux/ioctl.h>
97 #include <linux/slab.h>
98 #include <linux/tty.h>
99 #include <linux/errno.h>
100 #include <linux/string.h> /* used in new tty drivers */
101 #include <linux/signal.h> /* used in new tty drivers */
102 #include <linux/if.h>
103 #include <linux/bitops.h>
105 #include <asm/system.h>
106 #include <asm/termios.h>
107 #include <asm/uaccess.h>
110 * Buffers for individual HDLC frames
112 #define MAX_HDLC_FRAME_SIZE 65535
113 #define DEFAULT_RX_BUF_COUNT 10
114 #define MAX_RX_BUF_COUNT 60
115 #define DEFAULT_TX_BUF_COUNT 3
117 struct n_hdlc_buf {
118 struct n_hdlc_buf *link;
119 int count;
120 char buf[1];
123 #define N_HDLC_BUF_SIZE (sizeof(struct n_hdlc_buf) + maxframe)
125 struct n_hdlc_buf_list {
126 struct n_hdlc_buf *head;
127 struct n_hdlc_buf *tail;
128 int count;
129 spinlock_t spinlock;
133 * struct n_hdlc - per device instance data structure
134 * @magic - magic value for structure
135 * @flags - miscellaneous control flags
136 * @tty - ptr to TTY structure
137 * @backup_tty - TTY to use if tty gets closed
138 * @tbusy - reentrancy flag for tx wakeup code
139 * @woke_up - FIXME: describe this field
140 * @tbuf - currently transmitting tx buffer
141 * @tx_buf_list - list of pending transmit frame buffers
142 * @rx_buf_list - list of received frame buffers
143 * @tx_free_buf_list - list unused transmit frame buffers
144 * @rx_free_buf_list - list unused received frame buffers
146 struct n_hdlc {
147 int magic;
148 __u32 flags;
149 struct tty_struct *tty;
150 struct tty_struct *backup_tty;
151 int tbusy;
152 int woke_up;
153 struct n_hdlc_buf *tbuf;
154 struct n_hdlc_buf_list tx_buf_list;
155 struct n_hdlc_buf_list rx_buf_list;
156 struct n_hdlc_buf_list tx_free_buf_list;
157 struct n_hdlc_buf_list rx_free_buf_list;
161 * HDLC buffer list manipulation functions
163 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list);
164 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
165 struct n_hdlc_buf *buf);
166 static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
168 /* Local functions */
170 static struct n_hdlc *n_hdlc_alloc (void);
172 /* debug level can be set by insmod for debugging purposes */
173 #define DEBUG_LEVEL_INFO 1
174 static int debuglevel;
176 /* max frame size for memory allocations */
177 static int maxframe = 4096;
179 /* TTY callbacks */
181 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
182 __u8 __user *buf, size_t nr);
183 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
184 const unsigned char *buf, size_t nr);
185 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
186 unsigned int cmd, unsigned long arg);
187 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
188 poll_table *wait);
189 static int n_hdlc_tty_open(struct tty_struct *tty);
190 static void n_hdlc_tty_close(struct tty_struct *tty);
191 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *cp,
192 char *fp, int count);
193 static void n_hdlc_tty_wakeup(struct tty_struct *tty);
195 #define bset(p,b) ((p)[(b) >> 5] |= (1 << ((b) & 0x1f)))
197 #define tty2n_hdlc(tty) ((struct n_hdlc *) ((tty)->disc_data))
198 #define n_hdlc2tty(n_hdlc) ((n_hdlc)->tty)
200 static void flush_rx_queue(struct tty_struct *tty)
202 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
203 struct n_hdlc_buf *buf;
205 while ((buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list)))
206 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, buf);
209 static void flush_tx_queue(struct tty_struct *tty)
211 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
212 struct n_hdlc_buf *buf;
213 unsigned long flags;
215 while ((buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list)))
216 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, buf);
217 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
218 if (n_hdlc->tbuf) {
219 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, n_hdlc->tbuf);
220 n_hdlc->tbuf = NULL;
222 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
225 static struct tty_ldisc_ops n_hdlc_ldisc = {
226 .owner = THIS_MODULE,
227 .magic = TTY_LDISC_MAGIC,
228 .name = "hdlc",
229 .open = n_hdlc_tty_open,
230 .close = n_hdlc_tty_close,
231 .read = n_hdlc_tty_read,
232 .write = n_hdlc_tty_write,
233 .ioctl = n_hdlc_tty_ioctl,
234 .poll = n_hdlc_tty_poll,
235 .receive_buf = n_hdlc_tty_receive,
236 .write_wakeup = n_hdlc_tty_wakeup,
237 .flush_buffer = flush_rx_queue,
241 * n_hdlc_release - release an n_hdlc per device line discipline info structure
242 * @n_hdlc - per device line discipline info structure
244 static void n_hdlc_release(struct n_hdlc *n_hdlc)
246 struct tty_struct *tty = n_hdlc2tty (n_hdlc);
247 struct n_hdlc_buf *buf;
249 if (debuglevel >= DEBUG_LEVEL_INFO)
250 printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
252 /* Ensure that the n_hdlcd process is not hanging on select()/poll() */
253 wake_up_interruptible (&tty->read_wait);
254 wake_up_interruptible (&tty->write_wait);
256 if (tty->disc_data == n_hdlc)
257 tty->disc_data = NULL; /* Break the tty->n_hdlc link */
259 /* Release transmit and receive buffers */
260 for(;;) {
261 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
262 if (buf) {
263 kfree(buf);
264 } else
265 break;
267 for(;;) {
268 buf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
269 if (buf) {
270 kfree(buf);
271 } else
272 break;
274 for(;;) {
275 buf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
276 if (buf) {
277 kfree(buf);
278 } else
279 break;
281 for(;;) {
282 buf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
283 if (buf) {
284 kfree(buf);
285 } else
286 break;
288 kfree(n_hdlc->tbuf);
289 kfree(n_hdlc);
291 } /* end of n_hdlc_release() */
294 * n_hdlc_tty_close - line discipline close
295 * @tty - pointer to tty info structure
297 * Called when the line discipline is changed to something
298 * else, the tty is closed, or the tty detects a hangup.
300 static void n_hdlc_tty_close(struct tty_struct *tty)
302 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
304 if (debuglevel >= DEBUG_LEVEL_INFO)
305 printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
307 if (n_hdlc != NULL) {
308 if (n_hdlc->magic != HDLC_MAGIC) {
309 printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
310 return;
312 #if defined(TTY_NO_WRITE_SPLIT)
313 clear_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
314 #endif
315 tty->disc_data = NULL;
316 if (tty == n_hdlc->backup_tty)
317 n_hdlc->backup_tty = NULL;
318 if (tty != n_hdlc->tty)
319 return;
320 if (n_hdlc->backup_tty) {
321 n_hdlc->tty = n_hdlc->backup_tty;
322 } else {
323 n_hdlc_release (n_hdlc);
327 if (debuglevel >= DEBUG_LEVEL_INFO)
328 printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
330 } /* end of n_hdlc_tty_close() */
333 * n_hdlc_tty_open - called when line discipline changed to n_hdlc
334 * @tty - pointer to tty info structure
336 * Returns 0 if success, otherwise error code
338 static int n_hdlc_tty_open (struct tty_struct *tty)
340 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
342 if (debuglevel >= DEBUG_LEVEL_INFO)
343 printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
344 __FILE__,__LINE__,
345 tty->name);
347 /* There should not be an existing table for this slot. */
348 if (n_hdlc) {
349 printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
350 return -EEXIST;
353 n_hdlc = n_hdlc_alloc();
354 if (!n_hdlc) {
355 printk (KERN_ERR "n_hdlc_alloc failed\n");
356 return -ENFILE;
359 tty->disc_data = n_hdlc;
360 n_hdlc->tty = tty;
361 tty->receive_room = 65536;
363 #if defined(TTY_NO_WRITE_SPLIT)
364 /* change tty_io write() to not split large writes into 8K chunks */
365 set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
366 #endif
368 /* flush receive data from driver */
369 tty_driver_flush_buffer(tty);
371 if (debuglevel >= DEBUG_LEVEL_INFO)
372 printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
374 return 0;
376 } /* end of n_tty_hdlc_open() */
379 * n_hdlc_send_frames - send frames on pending send buffer list
380 * @n_hdlc - pointer to ldisc instance data
381 * @tty - pointer to tty instance data
383 * Send frames on pending send buffer list until the driver does not accept a
384 * frame (busy) this function is called after adding a frame to the send buffer
385 * list and by the tty wakeup callback.
387 static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
389 register int actual;
390 unsigned long flags;
391 struct n_hdlc_buf *tbuf;
393 if (debuglevel >= DEBUG_LEVEL_INFO)
394 printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
395 check_again:
397 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
398 if (n_hdlc->tbusy) {
399 n_hdlc->woke_up = 1;
400 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
401 return;
403 n_hdlc->tbusy = 1;
404 n_hdlc->woke_up = 0;
405 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
407 /* get current transmit buffer or get new transmit */
408 /* buffer from list of pending transmit buffers */
410 tbuf = n_hdlc->tbuf;
411 if (!tbuf)
412 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
414 while (tbuf) {
415 if (debuglevel >= DEBUG_LEVEL_INFO)
416 printk("%s(%d)sending frame %p, count=%d\n",
417 __FILE__,__LINE__,tbuf,tbuf->count);
419 /* Send the next block of data to device */
420 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
421 actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
423 /* rollback was possible and has been done */
424 if (actual == -ERESTARTSYS) {
425 n_hdlc->tbuf = tbuf;
426 break;
428 /* if transmit error, throw frame away by */
429 /* pretending it was accepted by driver */
430 if (actual < 0)
431 actual = tbuf->count;
433 if (actual == tbuf->count) {
434 if (debuglevel >= DEBUG_LEVEL_INFO)
435 printk("%s(%d)frame %p completed\n",
436 __FILE__,__LINE__,tbuf);
438 /* free current transmit buffer */
439 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
441 /* this tx buffer is done */
442 n_hdlc->tbuf = NULL;
444 /* wait up sleeping writers */
445 wake_up_interruptible(&tty->write_wait);
447 /* get next pending transmit buffer */
448 tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
449 } else {
450 if (debuglevel >= DEBUG_LEVEL_INFO)
451 printk("%s(%d)frame %p pending\n",
452 __FILE__,__LINE__,tbuf);
454 /* buffer not accepted by driver */
455 /* set this buffer as pending buffer */
456 n_hdlc->tbuf = tbuf;
457 break;
461 if (!tbuf)
462 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
464 /* Clear the re-entry flag */
465 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
466 n_hdlc->tbusy = 0;
467 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
469 if (n_hdlc->woke_up)
470 goto check_again;
472 if (debuglevel >= DEBUG_LEVEL_INFO)
473 printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
475 } /* end of n_hdlc_send_frames() */
478 * n_hdlc_tty_wakeup - Callback for transmit wakeup
479 * @tty - pointer to associated tty instance data
481 * Called when low level device driver can accept more send data.
483 static void n_hdlc_tty_wakeup(struct tty_struct *tty)
485 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
487 if (debuglevel >= DEBUG_LEVEL_INFO)
488 printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
490 if (!n_hdlc)
491 return;
493 if (tty != n_hdlc->tty) {
494 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
495 return;
498 n_hdlc_send_frames (n_hdlc, tty);
500 } /* end of n_hdlc_tty_wakeup() */
503 * n_hdlc_tty_receive - Called by tty driver when receive data is available
504 * @tty - pointer to tty instance data
505 * @data - pointer to received data
506 * @flags - pointer to flags for data
507 * @count - count of received data in bytes
509 * Called by tty low level driver when receive data is available. Data is
510 * interpreted as one HDLC frame.
512 static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
513 char *flags, int count)
515 register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
516 register struct n_hdlc_buf *buf;
518 if (debuglevel >= DEBUG_LEVEL_INFO)
519 printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
520 __FILE__,__LINE__, count);
522 /* This can happen if stuff comes in on the backup tty */
523 if (!n_hdlc || tty != n_hdlc->tty)
524 return;
526 /* verify line is using HDLC discipline */
527 if (n_hdlc->magic != HDLC_MAGIC) {
528 printk("%s(%d) line not using HDLC discipline\n",
529 __FILE__,__LINE__);
530 return;
533 if ( count>maxframe ) {
534 if (debuglevel >= DEBUG_LEVEL_INFO)
535 printk("%s(%d) rx count>maxframesize, data discarded\n",
536 __FILE__,__LINE__);
537 return;
540 /* get a free HDLC buffer */
541 buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
542 if (!buf) {
543 /* no buffers in free list, attempt to allocate another rx buffer */
544 /* unless the maximum count has been reached */
545 if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
546 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
549 if (!buf) {
550 if (debuglevel >= DEBUG_LEVEL_INFO)
551 printk("%s(%d) no more rx buffers, data discarded\n",
552 __FILE__,__LINE__);
553 return;
556 /* copy received data to HDLC buffer */
557 memcpy(buf->buf,data,count);
558 buf->count=count;
560 /* add HDLC buffer to list of received frames */
561 n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
563 /* wake up any blocked reads and perform async signalling */
564 wake_up_interruptible (&tty->read_wait);
565 if (n_hdlc->tty->fasync != NULL)
566 kill_fasync (&n_hdlc->tty->fasync, SIGIO, POLL_IN);
568 } /* end of n_hdlc_tty_receive() */
571 * n_hdlc_tty_read - Called to retrieve one frame of data (if available)
572 * @tty - pointer to tty instance data
573 * @file - pointer to open file object
574 * @buf - pointer to returned data buffer
575 * @nr - size of returned data buffer
577 * Returns the number of bytes returned or error code.
579 static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
580 __u8 __user *buf, size_t nr)
582 struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
583 int ret = 0;
584 struct n_hdlc_buf *rbuf;
585 DECLARE_WAITQUEUE(wait, current);
587 if (debuglevel >= DEBUG_LEVEL_INFO)
588 printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
590 /* Validate the pointers */
591 if (!n_hdlc)
592 return -EIO;
594 /* verify user access to buffer */
595 if (!access_ok(VERIFY_WRITE, buf, nr)) {
596 printk(KERN_WARNING "%s(%d) n_hdlc_tty_read() can't verify user "
597 "buffer\n", __FILE__, __LINE__);
598 return -EFAULT;
601 add_wait_queue(&tty->read_wait, &wait);
603 for (;;) {
604 if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) {
605 ret = -EIO;
606 break;
608 if (tty_hung_up_p(file))
609 break;
611 set_current_state(TASK_INTERRUPTIBLE);
613 rbuf = n_hdlc_buf_get(&n_hdlc->rx_buf_list);
614 if (rbuf) {
615 if (rbuf->count > nr) {
616 /* too large for caller's buffer */
617 ret = -EOVERFLOW;
618 } else {
619 if (copy_to_user(buf, rbuf->buf, rbuf->count))
620 ret = -EFAULT;
621 else
622 ret = rbuf->count;
625 if (n_hdlc->rx_free_buf_list.count >
626 DEFAULT_RX_BUF_COUNT)
627 kfree(rbuf);
628 else
629 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
630 break;
633 /* no data */
634 if (file->f_flags & O_NONBLOCK) {
635 ret = -EAGAIN;
636 break;
639 schedule();
641 if (signal_pending(current)) {
642 ret = -EINTR;
643 break;
647 remove_wait_queue(&tty->read_wait, &wait);
648 __set_current_state(TASK_RUNNING);
650 return ret;
652 } /* end of n_hdlc_tty_read() */
655 * n_hdlc_tty_write - write a single frame of data to device
656 * @tty - pointer to associated tty device instance data
657 * @file - pointer to file object data
658 * @data - pointer to transmit data (one frame)
659 * @count - size of transmit frame in bytes
661 * Returns the number of bytes written (or error code).
663 static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
664 const unsigned char *data, size_t count)
666 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
667 int error = 0;
668 DECLARE_WAITQUEUE(wait, current);
669 struct n_hdlc_buf *tbuf;
671 if (debuglevel >= DEBUG_LEVEL_INFO)
672 printk("%s(%d)n_hdlc_tty_write() called count=%Zd\n",
673 __FILE__,__LINE__,count);
675 /* Verify pointers */
676 if (!n_hdlc)
677 return -EIO;
679 if (n_hdlc->magic != HDLC_MAGIC)
680 return -EIO;
682 /* verify frame size */
683 if (count > maxframe ) {
684 if (debuglevel & DEBUG_LEVEL_INFO)
685 printk (KERN_WARNING
686 "n_hdlc_tty_write: truncating user packet "
687 "from %lu to %d\n", (unsigned long) count,
688 maxframe );
689 count = maxframe;
692 add_wait_queue(&tty->write_wait, &wait);
694 for (;;) {
695 set_current_state(TASK_INTERRUPTIBLE);
697 tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
698 if (tbuf)
699 break;
701 if (file->f_flags & O_NONBLOCK) {
702 error = -EAGAIN;
703 break;
705 schedule();
707 n_hdlc = tty2n_hdlc (tty);
708 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
709 tty != n_hdlc->tty) {
710 printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
711 error = -EIO;
712 break;
715 if (signal_pending(current)) {
716 error = -EINTR;
717 break;
721 __set_current_state(TASK_RUNNING);
722 remove_wait_queue(&tty->write_wait, &wait);
724 if (!error) {
725 /* Retrieve the user's buffer */
726 memcpy(tbuf->buf, data, count);
728 /* Send the data */
729 tbuf->count = error = count;
730 n_hdlc_buf_put(&n_hdlc->tx_buf_list,tbuf);
731 n_hdlc_send_frames(n_hdlc,tty);
734 return error;
736 } /* end of n_hdlc_tty_write() */
739 * n_hdlc_tty_ioctl - process IOCTL system call for the tty device.
740 * @tty - pointer to tty instance data
741 * @file - pointer to open file object for device
742 * @cmd - IOCTL command code
743 * @arg - argument for IOCTL call (cmd dependent)
745 * Returns command dependent result.
747 static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
748 unsigned int cmd, unsigned long arg)
750 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
751 int error = 0;
752 int count;
753 unsigned long flags;
755 if (debuglevel >= DEBUG_LEVEL_INFO)
756 printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
757 __FILE__,__LINE__,cmd);
759 /* Verify the status of the device */
760 if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
761 return -EBADF;
763 switch (cmd) {
764 case FIONREAD:
765 /* report count of read data available */
766 /* in next available frame (if any) */
767 spin_lock_irqsave(&n_hdlc->rx_buf_list.spinlock,flags);
768 if (n_hdlc->rx_buf_list.head)
769 count = n_hdlc->rx_buf_list.head->count;
770 else
771 count = 0;
772 spin_unlock_irqrestore(&n_hdlc->rx_buf_list.spinlock,flags);
773 error = put_user(count, (int __user *)arg);
774 break;
776 case TIOCOUTQ:
777 /* get the pending tx byte count in the driver */
778 count = tty_chars_in_buffer(tty);
779 /* add size of next output frame in queue */
780 spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock,flags);
781 if (n_hdlc->tx_buf_list.head)
782 count += n_hdlc->tx_buf_list.head->count;
783 spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock,flags);
784 error = put_user(count, (int __user *)arg);
785 break;
787 case TCFLSH:
788 switch (arg) {
789 case TCIOFLUSH:
790 case TCOFLUSH:
791 flush_tx_queue(tty);
793 /* fall through to default */
795 default:
796 error = n_tty_ioctl_helper(tty, file, cmd, arg);
797 break;
799 return error;
801 } /* end of n_hdlc_tty_ioctl() */
804 * n_hdlc_tty_poll - TTY callback for poll system call
805 * @tty - pointer to tty instance data
806 * @filp - pointer to open file object for device
807 * @poll_table - wait queue for operations
809 * Determine which operations (read/write) will not block and return info
810 * to caller.
811 * Returns a bit mask containing info on which ops will not block.
813 static unsigned int n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
814 poll_table *wait)
816 struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
817 unsigned int mask = 0;
819 if (debuglevel >= DEBUG_LEVEL_INFO)
820 printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
822 if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
823 /* queue current process into any wait queue that */
824 /* may awaken in the future (read and write) */
826 poll_wait(filp, &tty->read_wait, wait);
827 poll_wait(filp, &tty->write_wait, wait);
829 /* set bits for operations that won't block */
830 if (n_hdlc->rx_buf_list.head)
831 mask |= POLLIN | POLLRDNORM; /* readable */
832 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
833 mask |= POLLHUP;
834 if (tty_hung_up_p(filp))
835 mask |= POLLHUP;
836 if (!tty_is_writelocked(tty) &&
837 n_hdlc->tx_free_buf_list.head)
838 mask |= POLLOUT | POLLWRNORM; /* writable */
840 return mask;
841 } /* end of n_hdlc_tty_poll() */
844 * n_hdlc_alloc - allocate an n_hdlc instance data structure
846 * Returns a pointer to newly created structure if success, otherwise %NULL
848 static struct n_hdlc *n_hdlc_alloc(void)
850 struct n_hdlc_buf *buf;
851 int i;
852 struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
854 if (!n_hdlc)
855 return NULL;
857 memset(n_hdlc, 0, sizeof(*n_hdlc));
859 n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
860 n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
861 n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
862 n_hdlc_buf_list_init(&n_hdlc->tx_buf_list);
864 /* allocate free rx buffer list */
865 for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
866 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
867 if (buf)
868 n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
869 else if (debuglevel >= DEBUG_LEVEL_INFO)
870 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
873 /* allocate free tx buffer list */
874 for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
875 buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
876 if (buf)
877 n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
878 else if (debuglevel >= DEBUG_LEVEL_INFO)
879 printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
882 /* Initialize the control block */
883 n_hdlc->magic = HDLC_MAGIC;
884 n_hdlc->flags = 0;
886 return n_hdlc;
888 } /* end of n_hdlc_alloc() */
891 * n_hdlc_buf_list_init - initialize specified HDLC buffer list
892 * @list - pointer to buffer list
894 static void n_hdlc_buf_list_init(struct n_hdlc_buf_list *list)
896 memset(list, 0, sizeof(*list));
897 spin_lock_init(&list->spinlock);
898 } /* end of n_hdlc_buf_list_init() */
901 * n_hdlc_buf_put - add specified HDLC buffer to tail of specified list
902 * @list - pointer to buffer list
903 * @buf - pointer to buffer
905 static void n_hdlc_buf_put(struct n_hdlc_buf_list *list,
906 struct n_hdlc_buf *buf)
908 unsigned long flags;
909 spin_lock_irqsave(&list->spinlock,flags);
911 buf->link=NULL;
912 if (list->tail)
913 list->tail->link = buf;
914 else
915 list->head = buf;
916 list->tail = buf;
917 (list->count)++;
919 spin_unlock_irqrestore(&list->spinlock,flags);
921 } /* end of n_hdlc_buf_put() */
924 * n_hdlc_buf_get - remove and return an HDLC buffer from list
925 * @list - pointer to HDLC buffer list
927 * Remove and return an HDLC buffer from the head of the specified HDLC buffer
928 * list.
929 * Returns a pointer to HDLC buffer if available, otherwise %NULL.
931 static struct n_hdlc_buf* n_hdlc_buf_get(struct n_hdlc_buf_list *list)
933 unsigned long flags;
934 struct n_hdlc_buf *buf;
935 spin_lock_irqsave(&list->spinlock,flags);
937 buf = list->head;
938 if (buf) {
939 list->head = buf->link;
940 (list->count)--;
942 if (!list->head)
943 list->tail = NULL;
945 spin_unlock_irqrestore(&list->spinlock,flags);
946 return buf;
948 } /* end of n_hdlc_buf_get() */
950 static char hdlc_banner[] __initdata =
951 KERN_INFO "HDLC line discipline maxframe=%u\n";
952 static char hdlc_register_ok[] __initdata =
953 KERN_INFO "N_HDLC line discipline registered.\n";
954 static char hdlc_register_fail[] __initdata =
955 KERN_ERR "error registering line discipline: %d\n";
956 static char hdlc_init_fail[] __initdata =
957 KERN_INFO "N_HDLC: init failure %d\n";
959 static int __init n_hdlc_init(void)
961 int status;
963 /* range check maxframe arg */
964 if (maxframe < 4096)
965 maxframe = 4096;
966 else if (maxframe > 65535)
967 maxframe = 65535;
969 printk(hdlc_banner, maxframe);
971 status = tty_register_ldisc(N_HDLC, &n_hdlc_ldisc);
972 if (!status)
973 printk(hdlc_register_ok);
974 else
975 printk(hdlc_register_fail, status);
977 if (status)
978 printk(hdlc_init_fail, status);
979 return status;
981 } /* end of init_module() */
983 static char hdlc_unregister_ok[] __exitdata =
984 KERN_INFO "N_HDLC: line discipline unregistered\n";
985 static char hdlc_unregister_fail[] __exitdata =
986 KERN_ERR "N_HDLC: can't unregister line discipline (err = %d)\n";
988 static void __exit n_hdlc_exit(void)
990 /* Release tty registration of line discipline */
991 int status = tty_unregister_ldisc(N_HDLC);
993 if (status)
994 printk(hdlc_unregister_fail, status);
995 else
996 printk(hdlc_unregister_ok);
999 module_init(n_hdlc_init);
1000 module_exit(n_hdlc_exit);
1002 MODULE_LICENSE("GPL");
1003 MODULE_AUTHOR("Paul Fulghum paulkf@microgate.com");
1004 module_param(debuglevel, int, 0);
1005 module_param(maxframe, int, 0);
1006 MODULE_ALIAS_LDISC(N_HDLC);