i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / tty / serial / sirfsoc_uart.h
blobfc64260fa93c48461e17a6468c6d9a84eed060c7
1 /*
2 * Drivers for CSR SiRFprimaII onboard UARTs.
4 * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
6 * Licensed under GPLv2 or later.
7 */
8 #include <linux/bitops.h>
10 /* UART Register Offset Define */
11 #define SIRFUART_LINE_CTRL 0x0040
12 #define SIRFUART_TX_RX_EN 0x004c
13 #define SIRFUART_DIVISOR 0x0050
14 #define SIRFUART_INT_EN 0x0054
15 #define SIRFUART_INT_STATUS 0x0058
16 #define SIRFUART_TX_DMA_IO_CTRL 0x0100
17 #define SIRFUART_TX_DMA_IO_LEN 0x0104
18 #define SIRFUART_TX_FIFO_CTRL 0x0108
19 #define SIRFUART_TX_FIFO_LEVEL_CHK 0x010C
20 #define SIRFUART_TX_FIFO_OP 0x0110
21 #define SIRFUART_TX_FIFO_STATUS 0x0114
22 #define SIRFUART_TX_FIFO_DATA 0x0118
23 #define SIRFUART_RX_DMA_IO_CTRL 0x0120
24 #define SIRFUART_RX_DMA_IO_LEN 0x0124
25 #define SIRFUART_RX_FIFO_CTRL 0x0128
26 #define SIRFUART_RX_FIFO_LEVEL_CHK 0x012C
27 #define SIRFUART_RX_FIFO_OP 0x0130
28 #define SIRFUART_RX_FIFO_STATUS 0x0134
29 #define SIRFUART_RX_FIFO_DATA 0x0138
30 #define SIRFUART_AFC_CTRL 0x0140
31 #define SIRFUART_SWH_DMA_IO 0x0148
33 /* UART Line Control Register */
34 #define SIRFUART_DATA_BIT_LEN_MASK 0x3
35 #define SIRFUART_DATA_BIT_LEN_5 BIT(0)
36 #define SIRFUART_DATA_BIT_LEN_6 1
37 #define SIRFUART_DATA_BIT_LEN_7 2
38 #define SIRFUART_DATA_BIT_LEN_8 3
39 #define SIRFUART_STOP_BIT_LEN_1 0
40 #define SIRFUART_STOP_BIT_LEN_2 BIT(2)
41 #define SIRFUART_PARITY_EN BIT(3)
42 #define SIRFUART_EVEN_BIT BIT(4)
43 #define SIRFUART_STICK_BIT_MASK (7 << 3)
44 #define SIRFUART_STICK_BIT_NONE (0 << 3)
45 #define SIRFUART_STICK_BIT_EVEN BIT(3)
46 #define SIRFUART_STICK_BIT_ODD (3 << 3)
47 #define SIRFUART_STICK_BIT_MARK (5 << 3)
48 #define SIRFUART_STICK_BIT_SPACE (7 << 3)
49 #define SIRFUART_SET_BREAK BIT(6)
50 #define SIRFUART_LOOP_BACK BIT(7)
51 #define SIRFUART_PARITY_MASK (7 << 3)
52 #define SIRFUART_DUMMY_READ BIT(16)
54 #define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
55 #define SIRFUART_RECV_TIMEOUT_MASK (0xFFFF << 16)
56 #define SIRFUART_RECV_TIMEOUT(x) (((x) & 0xFFFF) << 16)
58 /* UART Auto Flow Control */
59 #define SIRFUART_AFC_RX_THD_MASK 0x000000FF
60 #define SIRFUART_AFC_RX_EN BIT(8)
61 #define SIRFUART_AFC_TX_EN BIT(9)
62 #define SIRFUART_CTS_CTRL BIT(10)
63 #define SIRFUART_RTS_CTRL BIT(11)
64 #define SIRFUART_CTS_IN_STATUS BIT(12)
65 #define SIRFUART_RTS_OUT_STATUS BIT(13)
67 /* UART Interrupt Enable Register */
68 #define SIRFUART_RX_DONE_INT BIT(0)
69 #define SIRFUART_TX_DONE_INT BIT(1)
70 #define SIRFUART_RX_OFLOW_INT BIT(2)
71 #define SIRFUART_TX_ALLOUT_INT BIT(3)
72 #define SIRFUART_RX_IO_DMA_INT BIT(4)
73 #define SIRFUART_TX_IO_DMA_INT BIT(5)
74 #define SIRFUART_RXFIFO_FULL_INT BIT(6)
75 #define SIRFUART_TXFIFO_EMPTY_INT BIT(7)
76 #define SIRFUART_RXFIFO_THD_INT BIT(8)
77 #define SIRFUART_TXFIFO_THD_INT BIT(9)
78 #define SIRFUART_FRM_ERR_INT BIT(10)
79 #define SIRFUART_RXD_BREAK_INT BIT(11)
80 #define SIRFUART_RX_TIMEOUT_INT BIT(12)
81 #define SIRFUART_PARITY_ERR_INT BIT(13)
82 #define SIRFUART_CTS_INT_EN BIT(14)
83 #define SIRFUART_RTS_INT_EN BIT(15)
85 /* UART Interrupt Status Register */
86 #define SIRFUART_RX_DONE BIT(0)
87 #define SIRFUART_TX_DONE BIT(1)
88 #define SIRFUART_RX_OFLOW BIT(2)
89 #define SIRFUART_TX_ALL_EMPTY BIT(3)
90 #define SIRFUART_DMA_IO_RX_DONE BIT(4)
91 #define SIRFUART_DMA_IO_TX_DONE BIT(5)
92 #define SIRFUART_RXFIFO_FULL BIT(6)
93 #define SIRFUART_TXFIFO_EMPTY BIT(7)
94 #define SIRFUART_RXFIFO_THD_REACH BIT(8)
95 #define SIRFUART_TXFIFO_THD_REACH BIT(9)
96 #define SIRFUART_FRM_ERR BIT(10)
97 #define SIRFUART_RXD_BREAK BIT(11)
98 #define SIRFUART_RX_TIMEOUT BIT(12)
99 #define SIRFUART_PARITY_ERR BIT(13)
100 #define SIRFUART_CTS_CHANGE BIT(14)
101 #define SIRFUART_RTS_CHANGE BIT(15)
102 #define SIRFUART_PLUG_IN BIT(16)
104 #define SIRFUART_ERR_INT_STAT \
105 (SIRFUART_RX_OFLOW | \
106 SIRFUART_FRM_ERR | \
107 SIRFUART_RXD_BREAK | \
108 SIRFUART_PARITY_ERR)
109 #define SIRFUART_ERR_INT_EN \
110 (SIRFUART_RX_OFLOW_INT | \
111 SIRFUART_FRM_ERR_INT | \
112 SIRFUART_RXD_BREAK_INT | \
113 SIRFUART_PARITY_ERR_INT)
114 #define SIRFUART_TX_INT_EN SIRFUART_TXFIFO_EMPTY_INT
115 #define SIRFUART_RX_IO_INT_EN \
116 (SIRFUART_RX_TIMEOUT_INT | \
117 SIRFUART_RXFIFO_THD_INT | \
118 SIRFUART_RXFIFO_FULL_INT | \
119 SIRFUART_ERR_INT_EN)
121 /* UART FIFO Register */
122 #define SIRFUART_TX_FIFO_STOP 0x0
123 #define SIRFUART_TX_FIFO_RESET 0x1
124 #define SIRFUART_TX_FIFO_START 0x2
125 #define SIRFUART_RX_FIFO_STOP 0x0
126 #define SIRFUART_RX_FIFO_RESET 0x1
127 #define SIRFUART_RX_FIFO_START 0x2
128 #define SIRFUART_TX_MODE_DMA 0
129 #define SIRFUART_TX_MODE_IO 1
130 #define SIRFUART_RX_MODE_DMA 0
131 #define SIRFUART_RX_MODE_IO 1
133 #define SIRFUART_RX_EN 0x1
134 #define SIRFUART_TX_EN 0x2
136 /* Generic Definitions */
137 #define SIRFSOC_UART_NAME "ttySiRF"
138 #define SIRFSOC_UART_MAJOR 0
139 #define SIRFSOC_UART_MINOR 0
140 #define SIRFUART_PORT_NAME "sirfsoc-uart"
141 #define SIRFUART_MAP_SIZE 0x200
142 #define SIRFSOC_UART_NR 3
143 #define SIRFSOC_PORT_TYPE 0xa5
145 /* Baud Rate Calculation */
146 #define SIRF_MIN_SAMPLE_DIV 0xf
147 #define SIRF_MAX_SAMPLE_DIV 0x3f
148 #define SIRF_IOCLK_DIV_MAX 0xffff
149 #define SIRF_SAMPLE_DIV_SHIFT 16
150 #define SIRF_IOCLK_DIV_MASK 0xffff
151 #define SIRF_SAMPLE_DIV_MASK 0x3f0000
152 #define SIRF_BAUD_RATE_SUPPORT_NR 18
154 /* For Fast Baud Rate Calculation */
155 struct sirfsoc_baudrate_to_regv {
156 unsigned int baud_rate;
157 unsigned int reg_val;
160 struct sirfsoc_uart_port {
161 unsigned char hw_flow_ctrl;
162 unsigned char ms_enabled;
164 struct uart_port port;
165 struct pinmux *pmx;
168 /* Hardware Flow Control */
169 #define SIRFUART_AFC_CTRL_RX_THD 0x70
171 /* Register Access Control */
172 #define portaddr(port, reg) ((port)->membase + (reg))
173 #define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
174 #define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
175 #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
176 #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
178 /* UART Port Mask */
179 #define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f))
180 #define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80))
181 #define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100))
183 /* I/O Mode */
184 #define SIRFSOC_UART_IO_RX_MAX_CNT 256
185 #define SIRFSOC_UART_IO_TX_REASONABLE_CNT 6