drivers/usb/host/alchemy-common.c

   1 /*
   2  * USB block power/access management abstraction.
   3  *
   4  * Au1000+: The OHCI block control register is at the far end of the OHCI memory
   5  *          area. Au1550 has OHCI on different base address. No need to handle
   6  *          UDC here.
   7  * Au1200:  one register to control access and clocks to O/EHCI, UDC and OTG
   8  *          as well as the PHY for EHCI and UDC.
   9  *
  10  */
  11
  12 #include <linux/init.h>
  13 #include <linux/io.h>
  14 #include <linux/module.h>
  15 #include <linux/spinlock.h>
  16 #include <linux/syscore_ops.h>
  17 #include <asm/mach-au1x00/au1000.h>
  18
  19 /* control register offsets */
  20 #define AU1000_OHCICFG  0x7fffc
  21 #define AU1550_OHCICFG  0x07ffc
  22 #define AU1200_USBCFG   0x04
  23
  24 /* Au1000 USB block config bits */
  25 #define USBHEN_RD       (1 << 4)                /* OHCI reset-done indicator */
  26 #define USBHEN_CE       (1 << 3)                /* OHCI block clock enable */
  27 #define USBHEN_E        (1 << 2)                /* OHCI block enable */
  28 #define USBHEN_C        (1 << 1)                /* OHCI block coherency bit */
  29 #define USBHEN_BE       (1 << 0)                /* OHCI Big-Endian */
  30
  31 /* Au1200 USB config bits */
  32 #define USBCFG_PFEN     (1 << 31)               /* prefetch enable (undoc) */
  33 #define USBCFG_RDCOMB   (1 << 30)               /* read combining (undoc) */
  34 #define USBCFG_UNKNOWN  (5 << 20)               /* unknown, leave this way */
  35 #define USBCFG_SSD      (1 << 23)               /* serial short detect en */
  36 #define USBCFG_PPE      (1 << 19)               /* HS PHY PLL */
  37 #define USBCFG_UCE      (1 << 18)               /* UDC clock enable */
  38 #define USBCFG_ECE      (1 << 17)               /* EHCI clock enable */
  39 #define USBCFG_OCE      (1 << 16)               /* OHCI clock enable */
  40 #define USBCFG_FLA(x)   (((x) & 0x3f) << 8)
  41 #define USBCFG_UCAM     (1 << 7)                /* coherent access (undoc) */
  42 #define USBCFG_GME      (1 << 6)                /* OTG mem access */
  43 #define USBCFG_DBE      (1 << 5)                /* UDC busmaster enable */
  44 #define USBCFG_DME      (1 << 4)                /* UDC mem enable */
  45 #define USBCFG_EBE      (1 << 3)                /* EHCI busmaster enable */
  46 #define USBCFG_EME      (1 << 2)                /* EHCI mem enable */
  47 #define USBCFG_OBE      (1 << 1)                /* OHCI busmaster enable */
  48 #define USBCFG_OME      (1 << 0)                /* OHCI mem enable */
  49 #define USBCFG_INIT_AU1200      (USBCFG_PFEN | USBCFG_RDCOMB | USBCFG_UNKNOWN |\
  50                                  USBCFG_SSD | USBCFG_FLA(0x20) | USBCFG_UCAM | \
  51                                  USBCFG_GME | USBCFG_DBE | USBCFG_DME |        \
  52                                  USBCFG_EBE | USBCFG_EME | USBCFG_OBE |        \
  53                                  USBCFG_OME)
  54
  55 /* Au1300 USB config registers */
  56 #define USB_DWC_CTRL1           0x00
  57 #define USB_DWC_CTRL2           0x04
  58 #define USB_VBUS_TIMER          0x10
  59 #define USB_SBUS_CTRL           0x14
  60 #define USB_MSR_ERR             0x18
  61 #define USB_DWC_CTRL3           0x1C
  62 #define USB_DWC_CTRL4           0x20
  63 #define USB_OTG_STATUS          0x28
  64 #define USB_DWC_CTRL5           0x2C
  65 #define USB_DWC_CTRL6           0x30
  66 #define USB_DWC_CTRL7           0x34
  67 #define USB_PHY_STATUS          0xC0
  68 #define USB_INT_STATUS          0xC4
  69 #define USB_INT_ENABLE          0xC8
  70
  71 #define USB_DWC_CTRL1_OTGD      0x04 /* set to DISable OTG */
  72 #define USB_DWC_CTRL1_HSTRS     0x02 /* set to ENable EHCI */
  73 #define USB_DWC_CTRL1_DCRS      0x01 /* set to ENable UDC */
  74
  75 #define USB_DWC_CTRL2_PHY1RS    0x04 /* set to enable PHY1 */
  76 #define USB_DWC_CTRL2_PHY0RS    0x02 /* set to enable PHY0 */
  77 #define USB_DWC_CTRL2_PHYRS     0x01 /* set to enable PHY */
  78
  79 #define USB_DWC_CTRL3_OHCI1_CKEN        (1 << 19)
  80 #define USB_DWC_CTRL3_OHCI0_CKEN        (1 << 18)
  81 #define USB_DWC_CTRL3_EHCI0_CKEN        (1 << 17)
  82 #define USB_DWC_CTRL3_OTG0_CKEN         (1 << 16)
  83
  84 #define USB_SBUS_CTRL_SBCA              0x04 /* coherent access */
  85
  86 #define USB_INTEN_FORCE                 0x20
  87 #define USB_INTEN_PHY                   0x10
  88 #define USB_INTEN_UDC                   0x08
  89 #define USB_INTEN_EHCI                  0x04
  90 #define USB_INTEN_OHCI1                 0x02
  91 #define USB_INTEN_OHCI0                 0x01
  92
  93 static DEFINE_SPINLOCK(alchemy_usb_lock);
  94
  95 static inline void __au1300_usb_phyctl(void __iomem *base, int enable)
  96 {
  97         unsigned long r, s;
  98
  99         r = __raw_readl(base + USB_DWC_CTRL2);
 100         s = __raw_readl(base + USB_DWC_CTRL3);
 101
 102         s &= USB_DWC_CTRL3_OHCI1_CKEN | USB_DWC_CTRL3_OHCI0_CKEN |
 103                 USB_DWC_CTRL3_EHCI0_CKEN | USB_DWC_CTRL3_OTG0_CKEN;
 104
 105         if (enable) {
 106                 /* simply enable all PHYs */
 107                 r |= USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
 108                      USB_DWC_CTRL2_PHYRS;
 109                 __raw_writel(r, base + USB_DWC_CTRL2);
 110                 wmb();
 111         } else if (!s) {
 112                 /* no USB block active, do disable all PHYs */
 113                 r &= ~(USB_DWC_CTRL2_PHY1RS | USB_DWC_CTRL2_PHY0RS |
 114                        USB_DWC_CTRL2_PHYRS);
 115                 __raw_writel(r, base + USB_DWC_CTRL2);
 116                 wmb();
 117         }
 118 }
 119
 120 static inline void __au1300_ohci_control(void __iomem *base, int enable, int id)
 121 {
 122         unsigned long r;
 123
 124         if (enable) {
 125                 __raw_writel(1, base + USB_DWC_CTRL7);  /* start OHCI clock */
 126                 wmb();
 127
 128                 r = __raw_readl(base + USB_DWC_CTRL3);  /* enable OHCI block */
 129                 r |= (id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
 130                                : USB_DWC_CTRL3_OHCI1_CKEN;
 131                 __raw_writel(r, base + USB_DWC_CTRL3);
 132                 wmb();
 133
 134                 __au1300_usb_phyctl(base, enable);      /* power up the PHYs */
 135
 136                 r = __raw_readl(base + USB_INT_ENABLE);
 137                 r |= (id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1;
 138                 __raw_writel(r, base + USB_INT_ENABLE);
 139                 wmb();
 140
 141                 /* reset the OHCI start clock bit */
 142                 __raw_writel(0, base + USB_DWC_CTRL7);
 143                 wmb();
 144         } else {
 145                 r = __raw_readl(base + USB_INT_ENABLE);
 146                 r &= ~((id == 0) ? USB_INTEN_OHCI0 : USB_INTEN_OHCI1);
 147                 __raw_writel(r, base + USB_INT_ENABLE);
 148                 wmb();
 149
 150                 r = __raw_readl(base + USB_DWC_CTRL3);
 151                 r &= ~((id == 0) ? USB_DWC_CTRL3_OHCI0_CKEN
 152                                  : USB_DWC_CTRL3_OHCI1_CKEN);
 153                 __raw_writel(r, base + USB_DWC_CTRL3);
 154                 wmb();
 155
 156                 __au1300_usb_phyctl(base, enable);
 157         }
 158 }
 159
 160 static inline void __au1300_ehci_control(void __iomem *base, int enable)
 161 {
 162         unsigned long r;
 163
 164         if (enable) {
 165                 r = __raw_readl(base + USB_DWC_CTRL3);
 166                 r |= USB_DWC_CTRL3_EHCI0_CKEN;
 167                 __raw_writel(r, base + USB_DWC_CTRL3);
 168                 wmb();
 169
 170                 r = __raw_readl(base + USB_DWC_CTRL1);
 171                 r |= USB_DWC_CTRL1_HSTRS;
 172                 __raw_writel(r, base + USB_DWC_CTRL1);
 173                 wmb();
 174
 175                 __au1300_usb_phyctl(base, enable);
 176
 177                 r = __raw_readl(base + USB_INT_ENABLE);
 178                 r |= USB_INTEN_EHCI;
 179                 __raw_writel(r, base + USB_INT_ENABLE);
 180                 wmb();
 181         } else {
 182                 r = __raw_readl(base + USB_INT_ENABLE);
 183                 r &= ~USB_INTEN_EHCI;
 184                 __raw_writel(r, base + USB_INT_ENABLE);
 185                 wmb();
 186
 187                 r = __raw_readl(base + USB_DWC_CTRL1);
 188                 r &= ~USB_DWC_CTRL1_HSTRS;
 189                 __raw_writel(r, base + USB_DWC_CTRL1);
 190                 wmb();
 191
 192                 r = __raw_readl(base + USB_DWC_CTRL3);
 193                 r &= ~USB_DWC_CTRL3_EHCI0_CKEN;
 194                 __raw_writel(r, base + USB_DWC_CTRL3);
 195                 wmb();
 196
 197                 __au1300_usb_phyctl(base, enable);
 198         }
 199 }
 200
 201 static inline void __au1300_udc_control(void __iomem *base, int enable)
 202 {
 203         unsigned long r;
 204
 205         if (enable) {
 206                 r = __raw_readl(base + USB_DWC_CTRL1);
 207                 r |= USB_DWC_CTRL1_DCRS;
 208                 __raw_writel(r, base + USB_DWC_CTRL1);
 209                 wmb();
 210
 211                 __au1300_usb_phyctl(base, enable);
 212
 213                 r = __raw_readl(base + USB_INT_ENABLE);
 214                 r |= USB_INTEN_UDC;
 215                 __raw_writel(r, base + USB_INT_ENABLE);
 216                 wmb();
 217         } else {
 218                 r = __raw_readl(base + USB_INT_ENABLE);
 219                 r &= ~USB_INTEN_UDC;
 220                 __raw_writel(r, base + USB_INT_ENABLE);
 221                 wmb();
 222
 223                 r = __raw_readl(base + USB_DWC_CTRL1);
 224                 r &= ~USB_DWC_CTRL1_DCRS;
 225                 __raw_writel(r, base + USB_DWC_CTRL1);
 226                 wmb();
 227
 228                 __au1300_usb_phyctl(base, enable);
 229         }
 230 }
 231
 232 static inline void __au1300_otg_control(void __iomem *base, int enable)
 233 {
 234         unsigned long r;
 235         if (enable) {
 236                 r = __raw_readl(base + USB_DWC_CTRL3);
 237                 r |= USB_DWC_CTRL3_OTG0_CKEN;
 238                 __raw_writel(r, base + USB_DWC_CTRL3);
 239                 wmb();
 240
 241                 r = __raw_readl(base + USB_DWC_CTRL1);
 242                 r &= ~USB_DWC_CTRL1_OTGD;
 243                 __raw_writel(r, base + USB_DWC_CTRL1);
 244                 wmb();
 245
 246                 __au1300_usb_phyctl(base, enable);
 247         } else {
 248                 r = __raw_readl(base + USB_DWC_CTRL1);
 249                 r |= USB_DWC_CTRL1_OTGD;
 250                 __raw_writel(r, base + USB_DWC_CTRL1);
 251                 wmb();
 252
 253                 r = __raw_readl(base + USB_DWC_CTRL3);
 254                 r &= ~USB_DWC_CTRL3_OTG0_CKEN;
 255                 __raw_writel(r, base + USB_DWC_CTRL3);
 256                 wmb();
 257
 258                 __au1300_usb_phyctl(base, enable);
 259         }
 260 }
 261
 262 static inline int au1300_usb_control(int block, int enable)
 263 {
 264         void __iomem *base =
 265                 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
 266         int ret = 0;
 267
 268         switch (block) {
 269         case ALCHEMY_USB_OHCI0:
 270                 __au1300_ohci_control(base, enable, 0);
 271                 break;
 272         case ALCHEMY_USB_OHCI1:
 273                 __au1300_ohci_control(base, enable, 1);
 274                 break;
 275         case ALCHEMY_USB_EHCI0:
 276                 __au1300_ehci_control(base, enable);
 277                 break;
 278         case ALCHEMY_USB_UDC0:
 279                 __au1300_udc_control(base, enable);
 280                 break;
 281         case ALCHEMY_USB_OTG0:
 282                 __au1300_otg_control(base, enable);
 283                 break;
 284         default:
 285                 ret = -ENODEV;
 286         }
 287         return ret;
 288 }
 289
 290 static inline void au1300_usb_init(void)
 291 {
 292         void __iomem *base =
 293                 (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
 294
 295         /* set some sane defaults.  Note: we don't fiddle with DWC_CTRL4
 296          * here at all: Port 2 routing (EHCI or UDC) must be set either
 297          * by boot firmware or platform init code; I can't autodetect
 298          * a sane setting.
 299          */
 300         __raw_writel(0, base + USB_INT_ENABLE); /* disable all USB irqs */
 301         wmb();
 302         __raw_writel(0, base + USB_DWC_CTRL3); /* disable all clocks */
 303         wmb();
 304         __raw_writel(~0, base + USB_MSR_ERR); /* clear all errors */
 305         wmb();
 306         __raw_writel(~0, base + USB_INT_STATUS); /* clear int status */
 307         wmb();
 308         /* set coherent access bit */
 309         __raw_writel(USB_SBUS_CTRL_SBCA, base + USB_SBUS_CTRL);
 310         wmb();
 311 }
 312
 313 static inline void __au1200_ohci_control(void __iomem *base, int enable)
 314 {
 315         unsigned long r = __raw_readl(base + AU1200_USBCFG);
 316         if (enable) {
 317                 __raw_writel(r | USBCFG_OCE, base + AU1200_USBCFG);
 318                 wmb();
 319                 udelay(2000);
 320         } else {
 321                 __raw_writel(r & ~USBCFG_OCE, base + AU1200_USBCFG);
 322                 wmb();
 323                 udelay(1000);
 324         }
 325 }
 326
 327 static inline void __au1200_ehci_control(void __iomem *base, int enable)
 328 {
 329         unsigned long r = __raw_readl(base + AU1200_USBCFG);
 330         if (enable) {
 331                 __raw_writel(r | USBCFG_ECE | USBCFG_PPE, base + AU1200_USBCFG);
 332                 wmb();
 333                 udelay(1000);
 334         } else {
 335                 if (!(r & USBCFG_UCE))          /* UDC also off? */
 336                         r &= ~USBCFG_PPE;       /* yes: disable HS PHY PLL */
 337                 __raw_writel(r & ~USBCFG_ECE, base + AU1200_USBCFG);
 338                 wmb();
 339                 udelay(1000);
 340         }
 341 }
 342
 343 static inline void __au1200_udc_control(void __iomem *base, int enable)
 344 {
 345         unsigned long r = __raw_readl(base + AU1200_USBCFG);
 346         if (enable) {
 347                 __raw_writel(r | USBCFG_UCE | USBCFG_PPE, base + AU1200_USBCFG);
 348                 wmb();
 349         } else {
 350                 if (!(r & USBCFG_ECE))          /* EHCI also off? */
 351                         r &= ~USBCFG_PPE;       /* yes: disable HS PHY PLL */
 352                 __raw_writel(r & ~USBCFG_UCE, base + AU1200_USBCFG);
 353                 wmb();
 354         }
 355 }
 356
 357 static inline int au1200_coherency_bug(void)
 358 {
 359 #if defined(CONFIG_DMA_COHERENT)
 360         /* Au1200 AB USB does not support coherent memory */
 361         if (!(read_c0_prid() & 0xff)) {
 362                 printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
 363                 printk(KERN_INFO "Au1200 USB: update your board or re-configure"
 364                                  " the kernel\n");
 365                 return -ENODEV;
 366         }
 367 #endif
 368         return 0;
 369 }
 370
 371 static inline int au1200_usb_control(int block, int enable)
 372 {
 373         void __iomem *base =
 374                         (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
 375         int ret = 0;
 376
 377         switch (block) {
 378         case ALCHEMY_USB_OHCI0:
 379                 ret = au1200_coherency_bug();
 380                 if (ret && enable)
 381                         goto out;
 382                 __au1200_ohci_control(base, enable);
 383                 break;
 384         case ALCHEMY_USB_UDC0:
 385                 __au1200_udc_control(base, enable);
 386                 break;
 387         case ALCHEMY_USB_EHCI0:
 388                 ret = au1200_coherency_bug();
 389                 if (ret && enable)
 390                         goto out;
 391                 __au1200_ehci_control(base, enable);
 392                 break;
 393         default:
 394                 ret = -ENODEV;
 395         }
 396 out:
 397         return ret;
 398 }
 399
 400
 401 /* initialize USB block(s) to a known working state */
 402 static inline void au1200_usb_init(void)
 403 {
 404         void __iomem *base =
 405                         (void __iomem *)KSEG1ADDR(AU1200_USB_CTL_PHYS_ADDR);
 406         __raw_writel(USBCFG_INIT_AU1200, base + AU1200_USBCFG);
 407         wmb();
 408         udelay(1000);
 409 }
 410
 411 static inline void au1000_usb_init(unsigned long rb, int reg)
 412 {
 413         void __iomem *base = (void __iomem *)KSEG1ADDR(rb + reg);
 414         unsigned long r = __raw_readl(base);
 415
 416 #if defined(__BIG_ENDIAN)
 417         r |= USBHEN_BE;
 418 #endif
 419         r |= USBHEN_C;
 420
 421         __raw_writel(r, base);
 422         wmb();
 423         udelay(1000);
 424 }
 425
 426
 427 static inline void __au1xx0_ohci_control(int enable, unsigned long rb, int creg)
 428 {
 429         void __iomem *base = (void __iomem *)KSEG1ADDR(rb);
 430         unsigned long r = __raw_readl(base + creg);
 431
 432         if (enable) {
 433                 __raw_writel(r | USBHEN_CE, base + creg);
 434                 wmb();
 435                 udelay(1000);
 436                 __raw_writel(r | USBHEN_CE | USBHEN_E, base + creg);
 437                 wmb();
 438                 udelay(1000);
 439
 440                 /* wait for reset complete (read reg twice: au1500 erratum) */
 441                 while (__raw_readl(base + creg),
 442                         !(__raw_readl(base + creg) & USBHEN_RD))
 443                         udelay(1000);
 444         } else {
 445                 __raw_writel(r & ~(USBHEN_CE | USBHEN_E), base + creg);
 446                 wmb();
 447         }
 448 }
 449
 450 static inline int au1000_usb_control(int block, int enable, unsigned long rb,
 451                                      int creg)
 452 {
 453         int ret = 0;
 454
 455         switch (block) {
 456         case ALCHEMY_USB_OHCI0:
 457                 __au1xx0_ohci_control(enable, rb, creg);
 458                 break;
 459         default:
 460                 ret = -ENODEV;
 461         }
 462         return ret;
 463 }
 464
 465 /*
 466  * alchemy_usb_control - control Alchemy on-chip USB blocks
 467  * @block:      USB block to target
 468  * @enable:     set 1 to enable a block, 0 to disable
 469  */
 470 int alchemy_usb_control(int block, int enable)
 471 {
 472         unsigned long flags;
 473         int ret;
 474
 475         spin_lock_irqsave(&alchemy_usb_lock, flags);
 476         switch (alchemy_get_cputype()) {
 477         case ALCHEMY_CPU_AU1000:
 478         case ALCHEMY_CPU_AU1500:
 479         case ALCHEMY_CPU_AU1100:
 480                 ret = au1000_usb_control(block, enable,
 481                                 AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
 482                 break;
 483         case ALCHEMY_CPU_AU1550:
 484                 ret = au1000_usb_control(block, enable,
 485                                 AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
 486                 break;
 487         case ALCHEMY_CPU_AU1200:
 488                 ret = au1200_usb_control(block, enable);
 489                 break;
 490         case ALCHEMY_CPU_AU1300:
 491                 ret = au1300_usb_control(block, enable);
 492                 break;
 493         default:
 494                 ret = -ENODEV;
 495         }
 496         spin_unlock_irqrestore(&alchemy_usb_lock, flags);
 497         return ret;
 498 }
 499 EXPORT_SYMBOL_GPL(alchemy_usb_control);
 500
 501
 502 static unsigned long alchemy_usb_pmdata[2];
 503
 504 static void au1000_usb_pm(unsigned long br, int creg, int susp)
 505 {
 506         void __iomem *base = (void __iomem *)KSEG1ADDR(br);
 507
 508         if (susp) {
 509                 alchemy_usb_pmdata[0] = __raw_readl(base + creg);
 510                 /* There appears to be some undocumented reset register.... */
 511                 __raw_writel(0, base + 0x04);
 512                 wmb();
 513                 __raw_writel(0, base + creg);
 514                 wmb();
 515         } else {
 516                 __raw_writel(alchemy_usb_pmdata[0], base + creg);
 517                 wmb();
 518         }
 519 }
 520
 521 static void au1200_usb_pm(int susp)
 522 {
 523         void __iomem *base =
 524                         (void __iomem *)KSEG1ADDR(AU1200_USB_OTG_PHYS_ADDR);
 525         if (susp) {
 526                 /* save OTG_CAP/MUX registers which indicate port routing */
 527                 /* FIXME: write an OTG driver to do that */
 528                 alchemy_usb_pmdata[0] = __raw_readl(base + 0x00);
 529                 alchemy_usb_pmdata[1] = __raw_readl(base + 0x04);
 530         } else {
 531                 /* restore access to all MMIO areas */
 532                 au1200_usb_init();
 533
 534                 /* restore OTG_CAP/MUX registers */
 535                 __raw_writel(alchemy_usb_pmdata[0], base + 0x00);
 536                 __raw_writel(alchemy_usb_pmdata[1], base + 0x04);
 537                 wmb();
 538         }
 539 }
 540
 541 static void au1300_usb_pm(int susp)
 542 {
 543         void __iomem *base =
 544                         (void __iomem *)KSEG1ADDR(AU1300_USB_CTL_PHYS_ADDR);
 545         /* remember Port2 routing */
 546         if (susp) {
 547                 alchemy_usb_pmdata[0] = __raw_readl(base + USB_DWC_CTRL4);
 548         } else {
 549                 au1300_usb_init();
 550                 __raw_writel(alchemy_usb_pmdata[0], base + USB_DWC_CTRL4);
 551                 wmb();
 552         }
 553 }
 554
 555 static void alchemy_usb_pm(int susp)
 556 {
 557         switch (alchemy_get_cputype()) {
 558         case ALCHEMY_CPU_AU1000:
 559         case ALCHEMY_CPU_AU1500:
 560         case ALCHEMY_CPU_AU1100:
 561                 au1000_usb_pm(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG, susp);
 562                 break;
 563         case ALCHEMY_CPU_AU1550:
 564                 au1000_usb_pm(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG, susp);
 565                 break;
 566         case ALCHEMY_CPU_AU1200:
 567                 au1200_usb_pm(susp);
 568                 break;
 569         case ALCHEMY_CPU_AU1300:
 570                 au1300_usb_pm(susp);
 571                 break;
 572         }
 573 }
 574
 575 static int alchemy_usb_suspend(void)
 576 {
 577         alchemy_usb_pm(1);
 578         return 0;
 579 }
 580
 581 static void alchemy_usb_resume(void)
 582 {
 583         alchemy_usb_pm(0);
 584 }
 585
 586 static struct syscore_ops alchemy_usb_pm_ops = {
 587         .suspend        = alchemy_usb_suspend,
 588         .resume         = alchemy_usb_resume,
 589 };
 590
 591 static int __init alchemy_usb_init(void)
 592 {
 593         switch (alchemy_get_cputype()) {
 594         case ALCHEMY_CPU_AU1000:
 595         case ALCHEMY_CPU_AU1500:
 596         case ALCHEMY_CPU_AU1100:
 597                 au1000_usb_init(AU1000_USB_OHCI_PHYS_ADDR, AU1000_OHCICFG);
 598                 break;
 599         case ALCHEMY_CPU_AU1550:
 600                 au1000_usb_init(AU1550_USB_OHCI_PHYS_ADDR, AU1550_OHCICFG);
 601                 break;
 602         case ALCHEMY_CPU_AU1200:
 603                 au1200_usb_init();
 604                 break;
 605         case ALCHEMY_CPU_AU1300:
 606                 au1300_usb_init();
 607                 break;
 608         }
 609
 610         register_syscore_ops(&alchemy_usb_pm_ops);
 611
 612         return 0;
 613 }
 614 arch_initcall(alchemy_usb_init);