?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / usb / host / ehci-tegra.c
blobde36b8c66626600d7e5455d107e6226de03079fa
1 /*
2 * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
3 *
4 * Copyright (C) 2010 Google, Inc.
5 * Copyright (C) 2009 NVIDIA Corporation
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful, but WITHOUT
13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * more details.
16 *
17 */
18
19 #include <linux/clk.h>
20 #include <linux/platform_device.h>
21 #include <linux/platform_data/tegra_usb.h>
22 #include <linux/irq.h>
23 #include <linux/usb/otg.h>
24 #include <linux/gpio.h>
25 #include <linux/of.h>
26 #include <linux/of_gpio.h>
27
28 #include <mach/usb_phy.h>
29 #include <mach/iomap.h>
30
31 #define TEGRA_USB_DMA_ALIGN 32
32
33 struct tegra_ehci_hcd {
34 struct ehci_hcd *ehci;
35 struct tegra_usb_phy *phy;
36 struct clk *clk;
37 struct clk *emc_clk;
38 struct otg_transceiver *transceiver;
39 int host_resumed;
40 int bus_suspended;
41 int port_resuming;
42 int power_down_on_bus_suspend;
43 enum tegra_usb_phy_port_speed port_speed;
44 };
45
46 static void tegra_ehci_power_up(struct usb_hcd *hcd)
47 {
48 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
49
50 clk_enable(tegra->emc_clk);
51 clk_enable(tegra->clk);
52 tegra_usb_phy_power_on(tegra->phy);
53 tegra->host_resumed = 1;
54 }
55
56 static void tegra_ehci_power_down(struct usb_hcd *hcd)
57 {
58 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
59
60 tegra->host_resumed = 0;
61 tegra_usb_phy_power_off(tegra->phy);
62 clk_disable(tegra->clk);
63 clk_disable(tegra->emc_clk);
64 }
65
66 static int tegra_ehci_internal_port_reset(
67 struct ehci_hcd *ehci,
68 u32 __iomem *portsc_reg
69 )
70 {
71 u32 temp;
72 unsigned long flags;
73 int retval = 0;
74 int i, tries;
75 u32 saved_usbintr;
76
77 spin_lock_irqsave(&ehci->lock, flags);
78 saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
79 /* disable USB interrupt */
80 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
81 spin_unlock_irqrestore(&ehci->lock, flags);
82
83 /*
84 * Here we have to do Port Reset at most twice for
85 * Port Enable bit to be set.
86 */
87 for (i = 0; i < 2; i++) {
88 temp = ehci_readl(ehci, portsc_reg);
89 temp |= PORT_RESET;
90 ehci_writel(ehci, temp, portsc_reg);
91 mdelay(10);
92 temp &= ~PORT_RESET;
93 ehci_writel(ehci, temp, portsc_reg);
94 mdelay(1);
95 tries = 100;
96 do {
97 mdelay(1);
98 /*
99 * Up to this point, Port Enable bit is
100 * expected to be set after 2 ms waiting.
101 * USB1 usually takes extra 45 ms, for safety,
102 * we take 100 ms as timeout.
103 */
104 temp = ehci_readl(ehci, portsc_reg);
105 } while (!(temp & PORT_PE) && tries--);
106 if (temp & PORT_PE)
107 break;
108 }
109 if (i == 2)
110 retval = -ETIMEDOUT;
111
112 /*
113 * Clear Connect Status Change bit if it's set.
114 * We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
115 */
116 if (temp & PORT_CSC)
117 ehci_writel(ehci, PORT_CSC, portsc_reg);
118
119 /*
120 * Write to clear any interrupt status bits that might be set
121 * during port reset.
122 */
123 temp = ehci_readl(ehci, &ehci->regs->status);
124 ehci_writel(ehci, temp, &ehci->regs->status);
125
126 /* restore original interrupt enable bits */
127 ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
128 return retval;
129 }
130
131 static int tegra_ehci_hub_control(
132 struct usb_hcd *hcd,
133 u16 typeReq,
134 u16 wValue,
135 u16 wIndex,
136 char *buf,
137 u16 wLength
138 )
139 {
140 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
141 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
142 u32 __iomem *status_reg;
143 u32 temp;
144 unsigned long flags;
145 int retval = 0;
146
147 status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
148
149 spin_lock_irqsave(&ehci->lock, flags);
150
151 /*
152 * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
153 * that are write on clear, by writing back the register read value, so
154 * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
155 */
156 if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
157 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
158 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
159 goto done;
160 }
161
162 else if (typeReq == GetPortStatus) {
163 temp = ehci_readl(ehci, status_reg);
164 if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
165 /* Resume completed, re-enable disconnect detection */
166 tegra->port_resuming = 0;
167 tegra_usb_phy_postresume(tegra->phy);
168 }
169 }
170
171 else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
172 temp = ehci_readl(ehci, status_reg);
173 if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
174 retval = -EPIPE;
175 goto done;
176 }
177
178 temp &= ~PORT_WKCONN_E;
179 temp |= PORT_WKDISC_E | PORT_WKOC_E;
180 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
181
182 /*
183 * If a transaction is in progress, there may be a delay in
184 * suspending the port. Poll until the port is suspended.
185 */
186 if (handshake(ehci, status_reg, PORT_SUSPEND,
187 PORT_SUSPEND, 5000))
188 pr_err("%s: timeout waiting for SUSPEND\n", __func__);
189
190 set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
191 goto done;
192 }
193
194 /* For USB1 port we need to issue Port Reset twice internally */
195 if (tegra->phy->instance == 0 &&
196 (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) {
197 spin_unlock_irqrestore(&ehci->lock, flags);
198 return tegra_ehci_internal_port_reset(ehci, status_reg);
199 }
200
201 /*
202 * Tegra host controller will time the resume operation to clear the bit
203 * when the port control state switches to HS or FS Idle. This behavior
204 * is different from EHCI where the host controller driver is required
205 * to set this bit to a zero after the resume duration is timed in the
206 * driver.
207 */
208 else if (typeReq == ClearPortFeature &&
209 wValue == USB_PORT_FEAT_SUSPEND) {
210 temp = ehci_readl(ehci, status_reg);
211 if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
212 retval = -EPIPE;
213 goto done;
214 }
215
216 if (!(temp & PORT_SUSPEND))
217 goto done;
218
219 /* Disable disconnect detection during port resume */
220 tegra_usb_phy_preresume(tegra->phy);
221
222 ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
223
224 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
225 /* start resume signalling */
226 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
227
228 spin_unlock_irqrestore(&ehci->lock, flags);
229 msleep(20);
230 spin_lock_irqsave(&ehci->lock, flags);
231
232 /* Poll until the controller clears RESUME and SUSPEND */
233 if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
234 pr_err("%s: timeout waiting for RESUME\n", __func__);
235 if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
236 pr_err("%s: timeout waiting for SUSPEND\n", __func__);
237
238 ehci->reset_done[wIndex-1] = 0;
239
240 tegra->port_resuming = 1;
241 goto done;
242 }
243
244 spin_unlock_irqrestore(&ehci->lock, flags);
245
246 /* Handle the hub control events here */
247 return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
248 done:
249 spin_unlock_irqrestore(&ehci->lock, flags);
250 return retval;
251 }
252
253 static void tegra_ehci_restart(struct usb_hcd *hcd)
254 {
255 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
256
257 ehci_reset(ehci);
258
259 /* setup the frame list and Async q heads */
260 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
261 ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
262 /* setup the command register and set the controller in RUN mode */
263 ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
264 ehci->command |= CMD_RUN;
265 ehci_writel(ehci, ehci->command, &ehci->regs->command);
266
267 down_write(&ehci_cf_port_reset_rwsem);
268 ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
269 /* flush posted writes */
270 ehci_readl(ehci, &ehci->regs->command);
271 up_write(&ehci_cf_port_reset_rwsem);
272 }
273
274 static int tegra_usb_suspend(struct usb_hcd *hcd)
275 {
276 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
277 struct ehci_regs __iomem *hw = tegra->ehci->regs;
278 unsigned long flags;
279
280 spin_lock_irqsave(&tegra->ehci->lock, flags);
281
282 tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3;
283 ehci_halt(tegra->ehci);
284 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
285
286 spin_unlock_irqrestore(&tegra->ehci->lock, flags);
287
288 tegra_ehci_power_down(hcd);
289 return 0;
290 }
291
292 static int tegra_usb_resume(struct usb_hcd *hcd)
293 {
294 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
295 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
296 struct ehci_regs __iomem *hw = ehci->regs;
297 unsigned long val;
298
299 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
300 tegra_ehci_power_up(hcd);
301
302 if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) {
303 /* Wait for the phy to detect new devices
304 * before we restart the controller */
305 msleep(10);
306 goto restart;
307 }
308
309 /* Force the phy to keep data lines in suspend state */
310 tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed);
311
312 /* Enable host mode */
313 tdi_reset(ehci);
314
315 /* Enable Port Power */
316 val = readl(&hw->port_status[0]);
317 val |= PORT_POWER;
318 writel(val, &hw->port_status[0]);
319 udelay(10);
320
321 /* Check if the phy resume from LP0. When the phy resume from LP0
322 * USB register will be reset. */
323 if (!readl(&hw->async_next)) {
324 /* Program the field PTC based on the saved speed mode */
325 val = readl(&hw->port_status[0]);
326 val &= ~PORT_TEST(~0);
327 if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH)
328 val |= PORT_TEST_FORCE;
329 else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL)
330 val |= PORT_TEST(6);
331 else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
332 val |= PORT_TEST(7);
333 writel(val, &hw->port_status[0]);
334 udelay(10);
335
336 /* Disable test mode by setting PTC field to NORMAL_OP */
337 val = readl(&hw->port_status[0]);
338 val &= ~PORT_TEST(~0);
339 writel(val, &hw->port_status[0]);
340 udelay(10);
341 }
342
343 /* Poll until CCS is enabled */
344 if (handshake(ehci, &hw->port_status[0], PORT_CONNECT,
345 PORT_CONNECT, 2000)) {
346 pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__);
347 goto restart;
348 }
349
350 /* Poll until PE is enabled */
351 if (handshake(ehci, &hw->port_status[0], PORT_PE,
352 PORT_PE, 2000)) {
353 pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__);
354 goto restart;
355 }
356
357 /* Clear the PCI status, to avoid an interrupt taken upon resume */
358 val = readl(&hw->status);
359 val |= STS_PCD;
360 writel(val, &hw->status);
361
362 /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */
363 val = readl(&hw->port_status[0]);
364 if ((val & PORT_POWER) && (val & PORT_PE)) {
365 val |= PORT_SUSPEND;
366 writel(val, &hw->port_status[0]);
367
368 /* Wait until port suspend completes */
369 if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND,
370 PORT_SUSPEND, 1000)) {
371 pr_err("%s: timeout waiting for PORT_SUSPEND\n",
372 __func__);
373 goto restart;
374 }
375 }
376
377 tegra_ehci_phy_restore_end(tegra->phy);
378 return 0;
379
380 restart:
381 if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH)
382 tegra_ehci_phy_restore_end(tegra->phy);
383
384 tegra_ehci_restart(hcd);
385 return 0;
386 }
387
388 static void tegra_ehci_shutdown(struct usb_hcd *hcd)
389 {
390 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
391
392 /* ehci_shutdown touches the USB controller registers, make sure
393 * controller has clocks to it */
394 if (!tegra->host_resumed)
395 tegra_ehci_power_up(hcd);
396
397 ehci_shutdown(hcd);
398 }
399
400 static int tegra_ehci_setup(struct usb_hcd *hcd)
401 {
402 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
403 int retval;
404
405 /* EHCI registers start at offset 0x100 */
406 ehci->caps = hcd->regs + 0x100;
407 ehci->regs = hcd->regs + 0x100 +
408 HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
409
410 dbg_hcs_params(ehci, "reset");
411 dbg_hcc_params(ehci, "reset");
412
413 /* cache this readonly data; minimize chip reads */
414 ehci->hcs_params = readl(&ehci->caps->hcs_params);
415
416 /* switch to host mode */
417 hcd->has_tt = 1;
418 ehci_reset(ehci);
419
420 retval = ehci_halt(ehci);
421 if (retval)
422 return retval;
423
424 /* data structure init */
425 retval = ehci_init(hcd);
426 if (retval)
427 return retval;
428
429 ehci->sbrn = 0x20;
430
431 ehci_port_power(ehci, 1);
432 return retval;
433 }
434
435 #ifdef CONFIG_PM
436 static int tegra_ehci_bus_suspend(struct usb_hcd *hcd)
437 {
438 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
439 int error_status = 0;
440
441 error_status = ehci_bus_suspend(hcd);
442 if (!error_status && tegra->power_down_on_bus_suspend) {
443 tegra_usb_suspend(hcd);
444 tegra->bus_suspended = 1;
445 }
446
447 return error_status;
448 }
449
450 static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
451 {
452 struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
453
454 if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) {
455 tegra_usb_resume(hcd);
456 tegra->bus_suspended = 0;
457 }
458
459 tegra_usb_phy_preresume(tegra->phy);
460 tegra->port_resuming = 1;
461 return ehci_bus_resume(hcd);
462 }
463 #endif
464
465 struct temp_buffer {
466 void *kmalloc_ptr;
467 void *old_xfer_buffer;
468 u8 data[0];
469 };
470
471 static void free_temp_buffer(struct urb *urb)
472 {
473 enum dma_data_direction dir;
474 struct temp_buffer *temp;
475
476 if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
477 return;
478
479 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
480
481 temp = container_of(urb->transfer_buffer, struct temp_buffer,
482 data);
483
484 if (dir == DMA_FROM_DEVICE)
485 memcpy(temp->old_xfer_buffer, temp->data,
486 urb->transfer_buffer_length);
487 urb->transfer_buffer = temp->old_xfer_buffer;
488 kfree(temp->kmalloc_ptr);
489
490 urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
491 }
492
493 static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
494 {
495 enum dma_data_direction dir;
496 struct temp_buffer *temp, *kmalloc_ptr;
497 size_t kmalloc_size;
498
499 if (urb->num_sgs || urb->sg ||
500 urb->transfer_buffer_length == 0 ||
501 !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
502 return 0;
503
504 dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
505
506 /* Allocate a buffer with enough padding for alignment */
507 kmalloc_size = urb->transfer_buffer_length +
508 sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1;
509
510 kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
511 if (!kmalloc_ptr)
512 return -ENOMEM;
513
514 /* Position our struct temp_buffer such that data is aligned */
515 temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
516
517 temp->kmalloc_ptr = kmalloc_ptr;
518 temp->old_xfer_buffer = urb->transfer_buffer;
519 if (dir == DMA_TO_DEVICE)
520 memcpy(temp->data, urb->transfer_buffer,
521 urb->transfer_buffer_length);
522 urb->transfer_buffer = temp->data;
523
524 urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
525
526 return 0;
527 }
528
529 static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
530 gfp_t mem_flags)
531 {
532 int ret;
533
534 ret = alloc_temp_buffer(urb, mem_flags);
535 if (ret)
536 return ret;
537
538 ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
539 if (ret)
540 free_temp_buffer(urb);
541
542 return ret;
543 }
544
545 static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
546 {
547 usb_hcd_unmap_urb_for_dma(hcd, urb);
548 free_temp_buffer(urb);
549 }
550
551 static const struct hc_driver tegra_ehci_hc_driver = {
552 .description = hcd_name,
553 .product_desc = "Tegra EHCI Host Controller",
554 .hcd_priv_size = sizeof(struct ehci_hcd),
555
556 .flags = HCD_USB2 | HCD_MEMORY,
557
558 .reset = tegra_ehci_setup,
559 .irq = ehci_irq,
560
561 .start = ehci_run,
562 .stop = ehci_stop,
563 .shutdown = tegra_ehci_shutdown,
564 .urb_enqueue = ehci_urb_enqueue,
565 .urb_dequeue = ehci_urb_dequeue,
566 .map_urb_for_dma = tegra_ehci_map_urb_for_dma,
567 .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma,
568 .endpoint_disable = ehci_endpoint_disable,
569 .endpoint_reset = ehci_endpoint_reset,
570 .get_frame_number = ehci_get_frame,
571 .hub_status_data = ehci_hub_status_data,
572 .hub_control = tegra_ehci_hub_control,
573 .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
574 #ifdef CONFIG_PM
575 .bus_suspend = tegra_ehci_bus_suspend,
576 .bus_resume = tegra_ehci_bus_resume,
577 #endif
578 .relinquish_port = ehci_relinquish_port,
579 .port_handed_over = ehci_port_handed_over,
580 };
581
582 static int setup_vbus_gpio(struct platform_device *pdev)
583 {
584 int err = 0;
585 int gpio;
586
587 if (!pdev->dev.of_node)
588 return 0;
589
590 gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0);
591 if (!gpio_is_valid(gpio))
592 return 0;
593
594 err = gpio_request(gpio, "vbus_gpio");
595 if (err) {
596 dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
597 return err;
598 }
599 err = gpio_direction_output(gpio, 1);
600 if (err) {
601 dev_err(&pdev->dev, "can't enable vbus\n");
602 return err;
603 }
604
605 return err;
606 }
607
608 static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
609
610 static int tegra_ehci_probe(struct platform_device *pdev)
611 {
612 struct resource *res;
613 struct usb_hcd *hcd;
614 struct tegra_ehci_hcd *tegra;
615 struct tegra_ehci_platform_data *pdata;
616 int err = 0;
617 int irq;
618 int instance = pdev->id;
619
620 pdata = pdev->dev.platform_data;
621 if (!pdata) {
622 dev_err(&pdev->dev, "Platform data missing\n");
623 return -EINVAL;
624 }
625
626 /* Right now device-tree probed devices don't get dma_mask set.
627 * Since shared usb code relies on it, set it here for now.
628 * Once we have dma capability bindings this can go away.
629 */
630 if (!pdev->dev.dma_mask)
631 pdev->dev.dma_mask = &tegra_ehci_dma_mask;
632
633 setup_vbus_gpio(pdev);
634
635 tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
636 if (!tegra)
637 return -ENOMEM;
638
639 hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
640 dev_name(&pdev->dev));
641 if (!hcd) {
642 dev_err(&pdev->dev, "Unable to create HCD\n");
643 err = -ENOMEM;
644 goto fail_hcd;
645 }
646
647 platform_set_drvdata(pdev, tegra);
648
649 tegra->clk = clk_get(&pdev->dev, NULL);
650 if (IS_ERR(tegra->clk)) {
651 dev_err(&pdev->dev, "Can't get ehci clock\n");
652 err = PTR_ERR(tegra->clk);
653 goto fail_clk;
654 }
655
656 err = clk_enable(tegra->clk);
657 if (err)
658 goto fail_clken;
659
660 tegra->emc_clk = clk_get(&pdev->dev, "emc");
661 if (IS_ERR(tegra->emc_clk)) {
662 dev_err(&pdev->dev, "Can't get emc clock\n");
663 err = PTR_ERR(tegra->emc_clk);
664 goto fail_emc_clk;
665 }
666
667 clk_enable(tegra->emc_clk);
668 clk_set_rate(tegra->emc_clk, 400000000);
669
670 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
671 if (!res) {
672 dev_err(&pdev->dev, "Failed to get I/O memory\n");
673 err = -ENXIO;
674 goto fail_io;
675 }
676 hcd->rsrc_start = res->start;
677 hcd->rsrc_len = resource_size(res);
678 hcd->regs = ioremap(res->start, resource_size(res));
679 if (!hcd->regs) {
680 dev_err(&pdev->dev, "Failed to remap I/O memory\n");
681 err = -ENOMEM;
682 goto fail_io;
683 }
684
685 /* This is pretty ugly and needs to be fixed when we do only
686 * device-tree probing. Old code relies on the platform_device
687 * numbering that we lack for device-tree-instantiated devices.
688 */
689 if (instance < 0) {
690 switch (res->start) {
691 case TEGRA_USB_BASE:
692 instance = 0;
693 break;
694 case TEGRA_USB2_BASE:
695 instance = 1;
696 break;
697 case TEGRA_USB3_BASE:
698 instance = 2;
699 break;
700 default:
701 err = -ENODEV;
702 dev_err(&pdev->dev, "unknown usb instance\n");
703 goto fail_phy;
704 }
705 }
706
707 tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
708 TEGRA_USB_PHY_MODE_HOST);
709 if (IS_ERR(tegra->phy)) {
710 dev_err(&pdev->dev, "Failed to open USB phy\n");
711 err = -ENXIO;
712 goto fail_phy;
713 }
714
715 err = tegra_usb_phy_power_on(tegra->phy);
716 if (err) {
717 dev_err(&pdev->dev, "Failed to power on the phy\n");
718 goto fail;
719 }
720
721 tegra->host_resumed = 1;
722 tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend;
723 tegra->ehci = hcd_to_ehci(hcd);
724
725 irq = platform_get_irq(pdev, 0);
726 if (!irq) {
727 dev_err(&pdev->dev, "Failed to get IRQ\n");
728 err = -ENODEV;
729 goto fail;
730 }
731 set_irq_flags(irq, IRQF_VALID);
732
733 #ifdef CONFIG_USB_OTG_UTILS
734 if (pdata->operating_mode == TEGRA_USB_OTG) {
735 tegra->transceiver = otg_get_transceiver();
736 if (tegra->transceiver)
737 otg_set_host(tegra->transceiver, &hcd->self);
738 }
739 #endif
740
741 err = usb_add_hcd(hcd, irq, IRQF_SHARED);
742 if (err) {
743 dev_err(&pdev->dev, "Failed to add USB HCD\n");
744 goto fail;
745 }
746
747 return err;
748
749 fail:
750 #ifdef CONFIG_USB_OTG_UTILS
751 if (tegra->transceiver) {
752 otg_set_host(tegra->transceiver, NULL);
753 otg_put_transceiver(tegra->transceiver);
754 }
755 #endif
756 tegra_usb_phy_close(tegra->phy);
757 fail_phy:
758 iounmap(hcd->regs);
759 fail_io:
760 clk_disable(tegra->emc_clk);
761 clk_put(tegra->emc_clk);
762 fail_emc_clk:
763 clk_disable(tegra->clk);
764 fail_clken:
765 clk_put(tegra->clk);
766 fail_clk:
767 usb_put_hcd(hcd);
768 fail_hcd:
769 kfree(tegra);
770 return err;
771 }
772
773 #ifdef CONFIG_PM
774 static int tegra_ehci_resume(struct platform_device *pdev)
775 {
776 struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
777 struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
778
779 if (tegra->bus_suspended)
780 return 0;
781
782 return tegra_usb_resume(hcd);
783 }
784
785 static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state)
786 {
787 struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
788 struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
789
790 if (tegra->bus_suspended)
791 return 0;
792
793 if (time_before(jiffies, tegra->ehci->next_statechange))
794 msleep(10);
795
796 return tegra_usb_suspend(hcd);
797 }
798 #endif
799
800 static int tegra_ehci_remove(struct platform_device *pdev)
801 {
802 struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
803 struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
804
805 if (tegra == NULL || hcd == NULL)
806 return -EINVAL;
807
808 #ifdef CONFIG_USB_OTG_UTILS
809 if (tegra->transceiver) {
810 otg_set_host(tegra->transceiver, NULL);
811 otg_put_transceiver(tegra->transceiver);
812 }
813 #endif
814
815 usb_remove_hcd(hcd);
816 usb_put_hcd(hcd);
817
818 tegra_usb_phy_close(tegra->phy);
819 iounmap(hcd->regs);
820
821 clk_disable(tegra->clk);
822 clk_put(tegra->clk);
823
824 clk_disable(tegra->emc_clk);
825 clk_put(tegra->emc_clk);
826
827 kfree(tegra);
828 return 0;
829 }
830
831 static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
832 {
833 struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev);
834 struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci);
835
836 if (hcd->driver->shutdown)
837 hcd->driver->shutdown(hcd);
838 }
839
840 static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
841 { .compatible = "nvidia,tegra20-ehci", },
842 { },
843 };
844
845 static struct platform_driver tegra_ehci_driver = {
846 .probe = tegra_ehci_probe,
847 .remove = tegra_ehci_remove,
848 #ifdef CONFIG_PM
849 .suspend = tegra_ehci_suspend,
850 .resume = tegra_ehci_resume,
851 #endif
852 .shutdown = tegra_ehci_hcd_shutdown,
853 .driver = {
854 .name = "tegra-ehci",
855 .of_match_table = tegra_ehci_of_match,
856 }
857 };